Beli Elumatec Kf 178 bekas (120)

Kondisi: sangat baik (bekas), Pengiriman ke UE: 350 euro Nodpfxel Sklgo Alkscr

Tahun pembuatan: 1995, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20/192, Kami menawarkan elumatec KF 178 bekas ini dalam kondisi sangat baik, tahun produksi 1995. Model: KF 178 Ncodpfsy D I R Sjx Alker No. Mesin: 20 192 Tegangan: 230/400 V Frekuensi: 50 Hz Arus: 3,6/2,1 A Kecepatan putar: 12.000 rpm Tekanan kerja minimal: 5 bar Tekanan kerja maksimal: 8 bar Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Lot 3 copy router Elumatec KF78/23. 2 unit berfungsi 100%. 1 unit berfungsi sekitar 50%, namun dapat direkondisi tanpa masalah, atau digunakan sebagai sumber suku cadang. Berbagai suku cadang cadangan disertakan. Ncsdpfeyzfl Iex Alksr Bidang kerja horizontal: Dengan pelat stop: 300 x 100 mm Dengan mal: 270 x 70 mm Bidang kerja vertikal: Dengan pelat stop: 290 x 100 mm Dengan mal: 230 x 70 mm 12.000 rpm Rentang penjepitan: 150 x 150 mm Tegangan suplai: 230/400V, 3 phase Harga untuk lot 3 mesin, tanpa meja pemasuk.

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Area pemotongan horizontal: Dengan penahan: 300 × 100 mm Dengan cetakan: 270 × 70 mm Jarak gerak: 80 mm Nsdpeyxnx Sofx Alkocr Area pemotongan vertikal: Dengan penahan: 290 × 100 mm Dengan cetakan: 230 × 70 mm Jarak gerak: 120 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de Ncodpsw Syzqjfx Alkor

Kondisi: sangat baik (bekas), Mesin milling penyalin Elumatec tipe KF 78/60 ongkos kirim EU - 350 euro Ncsdjvi R Avjpfx Alkor

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: E555 Touchscreen, berat keseluruhan: 2.300 kg, panjang pemotongan (maks.): 6.000 mm, diameter mata gergaji: 550 mm, kecepatan rotasi (maks.): 2.800 rpm, RINCIAN TEKNIS Panjang potong (maks.): 6000 mm Ncedpfx Asy Egahjlker Diameter pisau: 550 mm Kecepatan putaran pisau: 2800 rpm DETAIL MESIN Kontrol: E555 Layar Sentuh Pasokan udara tekan: 7 bar Dimensi & Berat Dimensi (P x L x T): 7500 x 1500 x 2000 mm Berat: 2.300 kg

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20404, elumatec AF 222 Für die Bearbeitung von Querstegen und Türprofilen aus Aluminium oder Kunststoff Manueller Vorschub der Fräseinheit Großer Schnittbereich bis 400 mm Ncjdoy Hcb Dspfx Alkor Stufenlos einstellbare Tischhöhe Materialanschlag beidseitig um bis zu 60° schwenkbar. Einkerbung bis 30° (Spitzwinkel, links und rechts). Rasterung bei 90° mit Indexstift. Mit Schnellwechsel-System und "Spindle Lock" für einfachen Werkzeugwechsel Präzise, leichtgängige und verschleißarme Kugelumlaufführungen Horizontale und vertikale pneumatische Materialspannung für Flexibilität Tiefenanschlag für vier verschiedene Einschnitttiefen Impulsgekühltes Kühlsystem Werkzeugdurchmesser max. 280 mm Werkzeugaufnahme 40 mm Profilhöhe max. 165 mm Schnitthöhe 145 mm Schnitttiefe 110 mm Schnittlänge 400 mm Spindeldrehzahl 2.800 U/min Verfahrweg 550 mm 2,5 kW Leistung bei 400 V / 50 Hz Druckluftversorgung 7 bar Abgabeleistung 2 kW Luftverbrauch 10 l pro Arbeitszyklus, 20 l mit Minimalmengenschmierung Länge 1.540 mm, Tiefe 905 mm, Höhe 1.000 mm, Gewicht 248 kg Die Maschine ist betriebsbereit. Das Werkzeug wurde nachgeschärft.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Panjang 3.050 mm Lebar 900 mm Nsdpfx Asy Aydhslkjcr Tinggi 2.600 mm Lebar penjepitan maksimum 2.800 mm Lebar penjepitan minimum 390 mm Tinggi batang penjepit 2.300 mm Lebar batang penjepit 100 mm Lebar roller bawah 120 mm Berat 370 kg Kapasitas angkut 200 kg Koneksi udara bertekanan 7 bar Konsumsi udara 35 l/menit

Kondisi: bekas, Tahun pembuatan: 1998, de-1 Nsdpfx Aloy Anhnjkjcr

Tahun pembuatan: 2008, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, elumatec-slk118-en Ncedeyr Ai Dopfx Alkor

Tahun pembuatan: 2020, jam operasional: 1.288 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Four-axis CNC profile machining center Designed for economical and efficient processing of aluminum and thin-walled steel profiles. Standard configuration includes air-cooled milling spindle (water-cooled spindle available as an option). Nedpfxjwxmdtj Alkocr All machining operations such as milling, drilling, and tapping are performed on a stationary clamped profile. Infinitely variable machining between -90° and +90° with any available tool. Automatic clamp adjustment with absolute measuring system. The traveling tool magazine ensures short tool change times, optimizing machining cycles. The magazine can be equipped with eight tools. For double profile and end machining, up to two rotating angle milling heads, each with two different tools (0° – 90° – 180° – 270°) are available (option). Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and optimal machine accessibility. Four-axis control 18.5" color monitor, USB ports, and network connection Windows operating system with eluCam SBZ 140 – 7.6 m Maximum machining length with end machining: 7,600 mm Maximum machining length without end machining: 7,720 mm

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angle head or special milling cutter with max. 100 mm diameter); six-sided machining; underside processing with angle head (option); Fast positioning (up to 60 m/min) of the machining unit along the X-axis; low-wear direct drive; with automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; equipped as standard with automatic central lubrication system; Rigid machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row circulating roller units and linear guides. 5-axis industrial PC control, including 3 axes as path control; high-dynamic three-phase servo drives with resolver and digital servo controller; freely programmable swivel angles for the A and C axes; With color display and floppy disk drive; Storage capacity for over 200,000 sets; 3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ45 connection (network connection must be provided by the customer's administrator) Analog modem (customer must provide an analog phone line) Technical Data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable For further details on the milling area, see drawing no. 150 05 17 08 Max. machining length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper size Included Accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamps Ncsdjw A Rv Ijpfx Alkor Tool setting gauge Front light barrier Saw blade DM400 with holder Angle milling head Important: The profile machining center is equipped as standard with front light barriers for safety. For additional lateral and rear safety, on-site measures are required, or please inquire about our safety fence solutions. Incl. Angle milling head for underside machining

Tahun pembuatan: 2018, Kondisi: bekas, de_001 Nedjyz U T Iepfx Alkscr

Tahun pembuatan: 2018, Kondisi: bekas, d1 Nedpfx Aloyz U Sqokjcr

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 1220099286, Maximum machining length: 4,150 mm without end-face machining Maximum machining length: 4,000 mm with end-face machining X-axis travel: 4,295 mm, max. feed rate 120 m/min Y-axis travel: 910 mm, max. feed rate 60 m/min Z-axis travel: 475 mm, feed rate 50 m/min Machining directions: 5 (top, rear, front, left, right) Positioning accuracy: +/- 0.1 mm Milling spindle power: 8 kW; S1 with recirculation (air-cooled) Milling spindle speed: max. 24,000 rpm Tool holder: HSK 63 F Tool changer: automatic Magazine tool stations: 2 x 4 positions Automatic tool changer for angle head: 2 positions Disc cutter diameter: 120 mm Ncsdpfxsy Eg T Ij Alkjr Tool length (from taper): 150 mm Clamp shift: automatic Clamps: Basic (with round guide) 6 pcs Operating system: Windows Production software: EluSoft, EluCAM Compressed air connection: 7 bar Electrical connection: 400 V, 3 Ph, 50 Hz, 25 A Air consumption per minute: approx. 185 l with spraying Dimensions L x W x H: 6,592 mm x 2,171 mm x 3,000 mm Weight: 2,900 kg

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 1423530534, Penawaran 26120 Data teknis: - Diameter mata gergaji sekitar 500 mm - Kecepatan putaran mata gergaji 2800 rpm - Area pemotongan, misalnya hingga sekitar 180 x 150 mm 150 x 200 mm - Panjang umpan saat pemotongan 90°: 5 - 600 mm - Pemotongan miring hingga 45° dimungkinkan - Sambungan udara bertekanan 7 bar - Konsumsi udara per siklus kerja tanpa / dengan semprotan: 50 / 64 l - Penggerak: 400 V / 4,0 kW - Kebutuhan ruang sekitar L 2750 x T 1600 x D 1350 mm Njdpfxsy Efl Ns Alkecr - Berat sekitar 800 kg - dengan: indikator digital, ragum pneumatik, pemutus otomatis saat profil habis

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04631037, panjang pemotongan (maks.): 6.000 mm, Elumatec DG 104 Double Mitre Saw (Year of Manufacture: 2006) – Precision Aluminium Processing Ncedpfeyvrq Tex Alkor For sale is a used Elumatec DG 104 double mitre saw from the year 2006. This machine is specifically designed for the precise processing of aluminium and plastic profiles, making it ideal for use in window, door, and façade manufacturing. Technical Highlights: - Saw units can swivel to both sides for accurate mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction ensures minimal vibration during operation - Pneumatic material clamping guarantees secure holding of the workpieces - High cutting precision and repeatability - Intuitive operation Equipment: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying unit Condition: The machine is in used, fully functional condition. Normal signs of use are present but do not affect functionality. Area of Application: Ideal for metal fabrication businesses, window manufacturers, and workshops that value precise and efficient mitre cutting. Miscellaneous: Inspection by appointment possible. Loading support can be provided if required. All specifications subject to change. Sale subject to prior sale.

Tahun pembuatan: 1999, Kondisi: bekas, Mesin bekas Tahun pembuatan: 1999 Area frais besar meskipun desainnya ringkas Frais penyalinan menggunakan pembatas samping atau template dalam rasio 1:1 Penunjuk penyalin pneumatik dua tingkat untuk dua diameter pisau frais berbeda Suspensi tuas penyalin yang dipatenkan menjamin proses pemfraisaan presisi dengan sedikit tenaga Penyesuaian tinggi meja untuk profil sangat tinggi hingga 400 mm Penggantian alat sederhana dengan "Spindle lock" Sistem penjepit material pneumatik Unit semprotan dosis Nsdpfxsxqihis Alkscr Opsi Template penyalin ter-frais untuk lubang gagang standar dan pemfraisaan PZ Penunjuk penyalin Collet penjepit Sistem pembatas Sistem penjepit material dengan 2 silinder penjepit Alat frais 8 mm Ketersediaan: segera Lokasi gudang: Flörsheim

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 500 mm, Perlengkapan: dokumentasi / manual, Data teknis dan diagram potong dapat diunduh di samping. Njdpfx Ajy D Sywslkocr 730 mm per langkah, dibatasi hingga 3 pengulangan. Mata gergaji Ø 500 x 4,4 x 30 mm Pemotongan hanya pada sudut 90° Panjang potong maksimum pada 3 pengulangan: 2180 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1240024978, tegangan masuk: 230 V, tekanan kerja: 7 batang, tekanan: 7 batang, Kami menawarkan elumatec EP 124 mesin pres sambungan sudut bekas ini, tahun pembuatan 2011. Tipe: EP 124 Ncedpfxjy D Nbfe Alkor Nomor mesin: 1240024978 Tegangan: 230 V Frekuensi: 50 Hz Arus: 1 A Daya: 120 W Tekanan kerja: 7 bar Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Tahun pembuatan: 1997, Kondisi: bekas, 11691001 Ncjdpfx Alsyzhuxjkjr

Tahun pembuatan: 2009, Kondisi: bekas, Diameter maksimum mata gergaji: 280 mm Penjepit material pneumatik Meja dapat diputar dengan titik penguncian Alat penyemprotan jumlah minimum Nedpfjyzgpbjx Alkjcr

Tahun pembuatan: 2003, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1500050182, Elumatec SBZ 150 Profile Machining Center with 5 Axes for Aluminium Profiles, 7.3m Due to a production shift to a tube laser system, we are selling our fully functional Elumatec SBZ 150. Ncjdpfsy Dvq Hjx Alker The machine was serviced by Elumatec in March 2026, and we have not used it since then. Viewings are welcome at any time; we are happy to demonstrate and allow you to test the machine on site. Technical data: - X-axis travel: 7300 mm - Y-axis travel: 1000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length (without end-face machining): 7300 mm - Max. machining length (with end-face machining): 6980 mm - Tool changer with 10 positions, plus a saw blade holder - 8 material clamps - Tool holder HSK63 - Spindle power 15 kW / 22,000 rpm - 2-level machining - Minimum quantity lubrication - Central lubrication - Saw blade 400 mm The machine is available immediately. Space requirements can be found in the attached layout. Transport instructions are also included in the attachment; if you have any questions, please do not hesitate to contact us. Disassembly, loading, and transport should preferably be organized by the buyer due to reassembly requirements. Various lifting and handling equipment can be provided by arrangement, if available. All specifications and dimensions have been provided to the best of our knowledge and belief; however, no guarantee is given as to their completeness or accuracy! Sale is as inspected, without warranty, return, or similar provisions. Subject to prior sale.

Tahun pembuatan: 2001, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8340020123, Dijual: mesin pembersih ELUMATEC EV 834. Mesin dalam kondisi berfungsi baik. Njdpsy Dfgkofx Alkscr