Beli Ex Pusat Pers bekas (31.547)

Kondisi: sangat baik (bekas), For sale: well-maintained Helmerding eccentric press. Very little used! Hodpfx Alsfdnw Ho Iol

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Controller: 32-bit Controller LCD Control Panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for customer-specific test specimen control Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring With nitrogen inertization, the test chamber is first flushed with large quantities of N2 until the oxygen content is below 3%. Afterwards, it switches to a base flow rate (approx. 10% of the main flush rate). The nitrogen flow of the base rate is measured with a flowmeter, displayed, and monitored by a limit switch. The O2 monitoring system continuously extracts gas from the test chamber through a flame arrestor and passes it over an O2 sensor that checks the residual oxygen content of the extracted air. The gas is then returned to the test chamber through a second flame arrestor. The extraction pump is monitored by a flow rate meter. Further details can be found in the user manual from Dräger (see appendix). The gas system is currently out of operation! The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test specimens, without irradiation, and without additional equipment. Dimensions: Test volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating Data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) (measured according to DIN EN ISO 3744, Hjdpfxsihb Amj Al Ijl 1m distance from the front) Weight: approx. 1500 kg, control cabinet approx. 300 kg External refrigeration unit Refrigerant: R404A / R23 Safety Information for Buyers: The following points are carried out on all chambers offered by us in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (Subject to changes and errors in technical data and information!) We are happy to answer any further questions by phone.

Kondisi: bekas, panjang total: 4.000 mm, lebar total: 1.200 mm, tinggi total: 1.500 mm, de_to_hu_it_lt_lv_nb_pl_pt Hodpfx Aey Ia T Hsl Iel

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Used vibratory finishing machine by PERS, model Vibra-Line B 150 l with buffer tank, combined with PERS dryer Vibra-Dry A 200 l – both demo machines – installed on a platform Technical data / Vibra-Line B 150 l: U-shaped work bowl with automatic unloading Gross capacity: 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 External diameter: 1,170 mm Height: 860 mm Bowl lining: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 amps CEE Machine color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soapy water) flows through the filter basket into the buffer tank, from where a submersible pump circulates the water back to the vibratory tumbler. Buffer tank dimensions (LxWxH): 700 x 400 x 460 mm Supplied with 1 submersible pump and 1 filter basket (630 µm) Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic unloading – vibratory dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Workpiece capacity: up to 65 kg Corn capacity: 25–35 kg Speed: 1,400 rpm Thermal output: 6 x 1.5 kW Hjdpfxsy A N U Ae Al Iol Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal bowl dimension: 240 mm Electrical connection: 3 x 400 V, 16 amps CEE Machine color: RAL 7015/7035 Corn granulate temperature: +30 to +50 °C Digital temperature control Pneumatically operated discharge valve Commissioning requires 25 kg of corn kernels, type GM 16 or GM 20

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 73, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 350 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, berat keseluruhan: 3.000 kg, frekuensi input: 50 Hz, arus masuk: 12 A, Perlengkapan: dokumentasi / manual, Kami menawarkan mesin EDM sinker AGIE HYPERSPARK 2 EXACT yang terawat baik, tahun pembuatan 2004. Tipe: HYPERSPARK 2 EXACT Nomor instalasi seri: 73 Nomor seri: 30.303 Tahun pembuatan: 2004 Konsumsi daya: 628,702 Berat: 3000 kg Tegangan: 3 × 400 V Frekuensi: 50 Hz Daya: 8,3 kVA Arus nominal: 12 A Arus hubung singkat: 10 kA Penukar alat 20 posisi Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami. Hodpfx Aey Hfavol Isl

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.300 mm, Laminator Nordmeccanica Supersimplex Hsdpfoy Dr Egox Al Isl Tanpa solvent Lebar kerja 1300 mm Gulungan dengan diameter maks. 1000 mm 2 pasang cone untuk inti 76 mm 3 pasang cone untuk inti 152 mm 2 sistem penuntun pita optik elektronik Pergantian manual cepat Kontrol tegangan Tahun 1997

Kondisi: sangat baik (bekas), pl-hu-001 Hodpjywu Haofx Al Iol

Kondisi: bekas, Tahun pembuatan: 1999, HAUPTKOMPONENTEN: • Schachtloser Abwickler A • Schachtloser Abwickler B • Beschichtungseinheit (Klebstoffauftragssystem) • Kaschiereinheit • Aufwickler (Wickeleinheit) • Folienzugregelungssystem (inklusive Tänzerrollen und Wägezellen) Hodpeyx Dk Rsfx Al Ijl • Automatische Bahnführungseinheit • Gummibeschichtete Gegendruckwalze • Dezentrale Walzen • Elektrische, pneumatische und Steuerungssysteme KLEBSTOFFSYSTEM: • Lösemittelfreies Klebstoffauftragssystem • Klebstoffzufuhrsystem • Dosierwalzen • Übertragswalzen für den Klebstoffauftrag • Gummibeschichtete Beschichtungs-/Gegendruckwalze • Integrierter Klebstoffmischer (im Lieferumfang enthalten) • Mindestlieferumfang: mindestens 3 Übertragswalzen enthalten VERARBEITUNGSEIGENSCHAFTEN: • Ausgelegt für die Kaschierung flexibler Folien • Kompatibel mit lösemittelfreien Klebstoffen • Kontinuierlicher Beschichtungs- und Kaschierprozess • Aufwicklung des laminierten Materials auf Endrolle • Einstellbare Auftragsmenge über Dosierwalzen • Einstellbarer Kaschierandruck STEUERUNG UND SYSTEME: • Elektrisches System mit Schaltschrank • Pneumatisches System • Folienzugregelung über Wägezellen und Tänzerrollen • Bahnführungssystem zur Ausrichtung • Dampf-Absaugsystem • Walzen-Konditioniersystem • Optionale Corona-Vorbehandlung TECHNISCHE MERKMALE: • Professionelle industrielle Kaschiermaschine • Für den Dauerbetrieb ausgelegt • Mehrteilige Konfiguration: Abwicklung, Beschichtung, Kaschierung, Aufwicklung • Für stabilen Betrieb unter kontrollierten Umgebungsbedingungen ausgelegt • CE-konform (Maschinenrichtlinie) MATERIALHANDLING: • Doppelabwickelsystem für zwei Substrate • Präzise Bahnzugregelung während des Prozesses • Aufwickelsystem für das fertige Laminat • Kompatibilität mit verschiedenen Folienmaterialien (nach Prozessanforderung)

Kondisi: baru, Dijual motor listrik dari produsen ternama ATB Motorentechnik GmbH, dibuat di Jerman. Model CD160M-4, dengan sertifikasi tahan ledakan ATEX II 2G, cocok untuk digunakan dengan inverter. Spesifikasi teknis: • Daya: 11 kW • Tipe: CD160M-4 • Tegangan: 400 V Δ / 690 V Y • Arus: 21 A / 12,1 A • Frekuensi: 50 Hz • Putaran: 1460 rpm (4 kutub) • Cos φ: 0,85 • Kelas isolasi: F • Tingkat perlindungan: IP55 • Berat: 168 kg • Tahun produksi: 2007 • ATEX: II 2G EEx de IIC T4 – motor untuk area dengan risiko ledakan gas • Poros: diameter 42 mm, splined. Hodjxbd U Eepfx Al Iol

Kondisi: hampir baru (bekas), mesin finishing gesek (seperti baru) dari PERS tempat finishing getar setengah otomatis dengan wadah untuk memisahkan media pengampelas dan benda kerja. Tidak diperlukan alat pemisah tambahan. Data Teknis: Mesin dalam kondisi hidup dan dapat dilihat sesuai perjanjian! Kapasitas: 140/65 l Diameter drum: 660 mm Hedpshr Rgfsfx Al Ijl Ukuran (PxLxT): 1.700 x 1.300 x 1.140 mm Daya: 4 kW Kecepatan: 0-160 RPM Lapisan PU: 26 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0153, de Hjdpenxi H Uefx Al Iel

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to standard plastics such as ABS, PLA, TPU, and Carbon PA, high-performance polymers like Ultem, Peek, CarbonPeek, and Helios-Peek are also available. The hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware/software and service. Four material dryers are included in the scope of delivery. Hodsibikwjpfx Al Ijl Payment terms: Advance payment, excluding transport and commissioning – these costs depend on the delivery address and will be invoiced accordingly.

Kondisi: bekas, Tahun pembuatan: 1960, de-001 Hedpox U A Igofx Al Iel

Tahun pembuatan: 2005, Kondisi: bekas, Tool holder 50 mm Driven tools: 5 units Non-driven tools: 4 units +++++ Please note that the machine is disassembled and ready for transport. For this reason, a powered demonstration or production of a video is not possible. Furthermore, our listing contains the most representative photos in the best possible quality. Unfortunately, it is not possible to provide any additional images. Hjdpfx Aogtyhrsl Ijl +++++

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250107, panjang total: 2.000 mm, lebar total: 1.900 mm, tinggi total: 3.050 mm, berat keseluruhan: 1.000 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, kapasitas pemanasan: 24 kW (32,63 hp), masa garansi: 12 bulan, berat muatan maksimum: 700 kg, berat benda kerja (maks.): 700 kg, diameter sangkar: 1.390 mm, Single-stage cleaning machine Operating principle, machine with lift door The cleaning machine’s tank is filled manually with tap water (optionally via the automatic refill valve AR-2) and is heated by heating elements and thermostat settings. The time settings for the phases—washing, dripping (optionally drying and steam extraction)—are adjusted via the "PROCESS TIMER." Parts are placed on the loading grid or loading trolley and pushed into the cleaning chamber. For heavy loads, a conveyor belt (MIU / AIU) can optionally be installed to transport the items into the cleaning cabin. The lift door is closed, the machine started, and the wash pump delivers the cleaning solution onto the objects to be cleaned via the rotating spray systems. The rotation of the upper and lower spray arms is powered by the reaction force of the jet nozzle located at one end of the spray arm. The rotational speed can be adjusted using a screw in the reaction nozzle. Optionally, the rotation of the upper spray arm can be motorized and the spray arms can be fitted with nozzles. After the wash cycle, a brief dripping phase follows, during which the used cleaning solution is returned through filter baskets to the wash tank. Optionally, the fluid from the wash stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage, such as pre-washing or rinsing, is optionally possible via stationary spray pipes NS-2 / NS-TEMP. In this case, parts are rinsed with fresh water (cold or heated), which flows into the drain through the drain valve. After the cleaning process, the parts can optionally be dried using a drying unit. When the cleaning process is complete, the lift door is left ajar for steam extraction. The steam from the cleaning cabin is either extracted using the steam extractor (DF-250S) or can be condensed and returned to the tank using the steam condenser (FX6002). Both accessories are optional and are not part of the machine’s standard equipment. Once the steam extraction time has elapsed, the lift door opens fully and the cleaning cycle is complete. Optionally, the lift door can be equipped with a safety edge, which automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning chamber onto a loading surface or loading trolley. Hodpfovvuzcsx Al Iel

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PG20240001, tinggi total: 910 mm, berat keseluruhan: 110 kg, panjang total: 830 mm, lebar total: 830 mm, jenis arus masuk: tiga fasa, berat benda kerja (maks.): 45 kg, kapasitas tangki: 60 l, kapasitas tangki yang dapat digunakan: 15 l, tegangan masuk: 400 V, lebar benda kerja (maks.): 160 mm, tinggi benda kerja (maks.): 160 mm, diameter luar: 160 mm, panjang benda kerja (maks.): 160 mm, tinggi dalam: 245 mm, lebar dalam: 280 mm, daya: 1,1 kW (1,50 hp), frekuensi input: 50 Hz, masa garansi: 12 bulan, berat kosong: 110 kg, kapasitas angkut: 60 kg, Universal vibratory finishing machine suitable for deburring and polishing. Ideal for small parts and batch processing. Vibra-Line B60M rotary vibrator with a 60 L capacity. The machine features a 20 mm thick polyurethane (PU) coating. With its 60-liter capacity, the working tank can accommodate up to 15 liters of workpieces and approximately 45 kg of abrasive media, depending on the version and size of the individual parts. The basic model of the "Vibra-Line B60M" is equipped with a control cabinet featuring a mechanical timer and process time control. Hedpevgagxefx Al Ijl

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20241202, tinggi total: 860 mm, berat keseluruhan: 320 kg, panjang total: 1.170 mm, lebar total: 1.170 mm, jenis arus masuk: tiga fasa, kapasitas tangki: 150 l, kapasitas tangki yang dapat digunakan: 100 l, tegangan masuk: 400 V, lebar benda kerja (maks.): 170 mm, tinggi benda kerja (maks.): 170 mm, diameter luar: 170 mm, panjang benda kerja (maks.): 170 mm, lebar dalam: 260 mm, daya: 2,2 kW (2,99 hp), frekuensi input: 50 Hz, masa garansi: 12 bulan, kapasitas angkut: 60 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The Vibra-Line DK rotary vibrator impresses with an open, domed container offering a capacity of 150 liters. This model is equipped with a pneumatically operated discharge automation and a sound-insulated lid, ensuring convenient and quiet operation. The U-shaped inner container features a 22 mm thick polyurethane (PU) lining, providing exceptional resistance to process wear. The 150-liter capacity allows for loading approximately 50 to 100 liters of metal parts per batch, depending on their shape and size. The wide drum and low discharge height significantly facilitate unloading of the processed parts. Machine control is managed via a frequency inverter with stepless speed regulation, operated through a 5.5-inch touchscreen. Process times, languages, and speeds can be adjusted quickly and easily here. Additionally, the control system manages two external ports, which can be used for process water and compound dosing. Hedpsviu Ehofx Al Ijl The Vibra-Line 150DK rotary vibrator is delivered as a plug-and-play solution and only requires a 16-amp CEE plug, 4 bar compressed air, and a water connection for commissioning. Our equipment complies with EU machinery/equipment directives and is supplied with a manufacturer’s declaration of conformity and CE marking.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250108, tinggi total: 2.200 mm, berat keseluruhan: 700 kg, panjang total: 1.700 mm, lebar total: 1.300 mm, jenis arus masuk: tiga fasa, berat benda kerja (maks.): 75 kg, kapasitas tangki: 120 l, kapasitas tangki yang dapat digunakan: 60 l, tegangan masuk: 400 V, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 180 rpm, daya: 4 kW (5,44 hp), arus masuk: 16 A, masa garansi: 12 bulan, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The Turbo-Line 120 “S” model features a stainless steel discharge chute, which is mounted directly onto the deburring machine. When the bowl is lowered, chips pass through a screen, while the parts to be deburred remain on top. Hsdevvu Snopfx Al Iol This Turbo-Line machine is equipped with a 120-liter drum with vertical, straight sides and a separate bottom section which rotates at an adjustable speed, typically between 115 and 135 rpm, but can be set anywhere from 50 to 180 rpm. During operation, the abrasive media inside the bowl create a uniform, spiral motion reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure long service life. The 120-liter process container can handle up to 50-60 liters of product per batch, depending on the shape and size of the parts. Deburring parameters such as time and speed are individually set via a manual touchscreen controller. Water and compound are added through a manually adjustable ball valve, which is included in the scope of delivery. Finished products are discharged by tilting the bowl, a process controlled via the touchscreen. The discharge speed is also adjustable on the touchscreen via the frequency inverter.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20241204, tinggi total: 905 mm, berat keseluruhan: 550 kg, panjang total: 1.200 mm, lebar total: 1.200 mm, jenis arus masuk: tiga fasa, kapasitas tangki: 220 l, kapasitas tangki yang dapat digunakan: 110 l, tegangan masuk: 400 V, lebar benda kerja (maks.): 200 mm, tinggi benda kerja (maks.): 200 mm, diameter luar: 200 mm, panjang benda kerja (maks.): 200 mm, kecepatan rotasi (min.): 1.400 rpm, lebar dalam: 240 mm, daya: 4,5 kW (6,12 hp), frekuensi input: 50 Hz, masa garansi: 12 bulan, kapasitas angkut: 100 kg, Maize Dryer Vibra-Dry DK 200 WT with Pneumatic Discharge and Steel Base. For sale: High-quality maize/cereal dryer Vibra-Dry DK 200 WT with a working volume of 220 liters. This versatile machine is ideal for drying and polishing with crushed maize granulate, resulting in a flawless and glossy finish. Key Features: Operating Principle: Moist parts are automatically transported from the rotary vibrator to the dryer via the separation table. Pneumatically Controlled Outlet Valve: Enables automatic discharge after drying. Coating: Interior walls as well as infeed and discharge areas feature a durable 2-component PU coating for reduced wear and noise levels. Temperature Control: Adjustable between 30°C and 50°C via manual control panel, with stepping for 0%, 50%, and 100%. Automatic temperature maintenance by toggling the heating system. Technical Details: Hedpfxsvi Nhdj Al Iel Fill with approximately 10-15% crushed maize granulate (25 kg recommended). Commissioning: Maize grains GM 16 or GM 20 must be used. This machine is reliable, robust, and ideal for operations that prioritise quality and efficiency. Enquire now!

Kondisi: siap digunakan (bekas), Sistem finishing vibrasi, Mesin gerinda geser, Mesin finishing vibrasi alur melingkar, Mesin bekas Pabrikan: Gránit-Ex Kft Tipe: FM-10, 1500 x 1500 Tahun: 2020 Berat: 600 kg Hsdpoxdfabjfx Al Isl d: 550 mm, Keliling: 1670 mm D: 1350 mm, Keliling: 3650 mm Torus: 350 mm

Kondisi: bekas, Tahun pembuatan: 1987, Max. rolling pressure NA t Workpiece diameter 38 mm Workpiece length 500 mm Total power requirement 24 kW Machine weight approx. 10 t Space requirement approx. ... m Max. stroke of the upper/lower tool slide 760 mm Max. rack length approx. 610 mm Workpiece length between centers approx. 500 mm Max. gear width/profile width 92 mm Max. workpiece diameter 38 mm Tailstock stroke on the boom (hydraulic) approx. 500 mm Module range min./max. 0.3 to 1.3 module Total drive approx. 24 kW - 380 V - 50 Hz Total weight approx. 10,000 kg Accessories / Special equipment: - KBH workpiece feeder installed parallel to the machine, currently configured for the loading and unloading of shaft-type workpieces approx. 16 mm Ø x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the area of the chucks, including workpiece position monitoring device. - Originally used for rolling the external gearing (Zz = 25) of so-called planet carriers (automotive), approx. 32 mm Ø x 14 mm long, workpiece Ø approx. 80 mm x 80 mm long. - Various accessories, separate control cabinet, separate 900 L hydraulic unit, coolant system integrated in the machine, control panel with plain-text fault diagnostics, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more cost-effective than hobbing. Hjdjt Hw D Dspfx Al Ijl Workpieces are clamped between centers and profiled by synchronously counter-moving rack tools. The material is displaced and formed by the increasing profile height within the rack tool. Profile and surface quality are optimized in the calibration zone of the tool. No run-out – as is necessary with hobbing or shaping – is required. The machine features an extremely robust design. Tool life can reach 25,000 to 100,000 parts, even for helical gears. Condition: Very good – assembled in our warehouse and ready for demonstration Delivery: Ex-stock – as inspected Payment: Strictly net – after receipt of invoice We thank you for your order. Further cold rolling machines and other gear production machines permanently available.

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Breite der beschichteten Bahn: 1.315 mm Maximale Bahnbreite: 1.330 mm Primär-Abwickler: 1.000 mm Sekundär-Abwickler: 1.200 mm Aufwickler: 1.200 mm Geschwindigkeit: 400 m/min Zubehör: - Lösemittelfreies Mischsystem Nordmeccanica - Kontinuierliche Befüllanlage World Mixer (mit 4 Behältern zu je 200 kg) Hsdpfx Aowp R Htel Iol - 5 Walzen Verarbeitbare Materialien: Beschichtete Bahn: BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON-CAST 30 - 80 μ ALU (Folie) 6,3 - 40 μ, PP-CAST 60 - 150 μ, Papier 40 - 150 g/m² Kaschierte Bahn: BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON-CAST 20 - 80 μ ALU (Folie) 6,3 - 40 μ, PP-CAST 20 - 150 μ, COEX-Folie 25 - 200 μ Papier 40 - 150 g/m²

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Getaran - mesin penghalus getar dikombinasikan dengan pengering jagung Hjdpfx Alexz N Uqo Isl

Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 550-235-ELD, GENERAL FEATURES Maximum rolling diameter 41 mm Maximum/minimum module range 1.5 / 0.39 Maximum rolling width 92 mm Maximum tool slide stroke 760 mm Maximum rack length 610 mm Hjdpfsd Nw Ttsx Al Ijl Maximum/minimum diametral pitch 20/40 - 32/64 Manufacturing No. 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power 15 HP

Kondisi: baru, Tahun pembuatan: 2024, Neue Maschine Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettbereich/Ausnehmung: 700 mm Bettbreite: 340 mm Spitzenweite: 1500 mm Spitzenhöhe: 250 mm Drehzahlbereich: 22 – 2000 min⁻¹ Hodpfewu Du Iox Al Iol Hauptspindelaufnahme: Bajonett 6 Spindelbohrung: 52 mm Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechsel-Stahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselräder-Satz und Bedienungsanleitung