Beli Extension Tangga bekas (4.288)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, produsen pengendali: MITSUBISHI, model controller: M70A, jumlah sumbu: 3, KAMIOKA VMC1600 3-sumbu ini diproduksi pada tahun 2012 dan dilengkapi dengan kontrol CNC Mitsubishi M70A. Mesin ini menawarkan lintasan sumbu yang luas dengan sumbu X sepanjang 1600 mm, sumbu Y sepanjang 800 mm, dan sumbu Z sepanjang 700 mm. Konstruksinya mencakup rel pemandu terbalik untuk presisi yang lebih tinggi. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin KAMIOKA VMC1600 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Ketinggian bebas / Bukaan vertikal: 170 - 870 mm Csdpfxsx D Dtmj Aa Tepw • Desain rel pemandu: Rel terbalik (sumbu Y dipasang di atas sumbu X)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Cpsdpfx Aaex D Iuzo Tow Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine features a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control system, it supports both roll and strip edge materials. Ideal for high-throughput environments that require flexibility and reliability in edge processing. Please contact us for further information about this machine. Additional equipment • Gluing unit for hot-melt adhesive: single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable 0° + 25° Machine advantages Technical machine advantages • Min. infeed width: 244 mm (during longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional information Cpedpfex D I D Aox Aa Tow Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough trimming unit: 80 kW motor, 6,000 rpm Double trimming unit: 2 motors, each 45 kW, 9,000 rpm Flush trimming unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool changer for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control unit ICOS OPEN: PC-based control system with integrated PLC and electronic track control, user-friendly interface with Windows standards

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, tinggi total: 2.600 mm, berat keseluruhan: 4.300 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 3, en Cpsdpfx Aasx Nkpze Tjw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, berat keseluruhan: 2.300 kg, kecepatan pemotongan: 3.400.000 mm/menit, Diese Behringer VAL350NC circular metal saw was manufactured in 2008. It offers a cutting capacity for round materials of 115 mm and for rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. Weighing approximately 2.3 tons, the machine is equipped with a BEHRINGER PLC control system and a micro-spray lubrication unit. Consider the opportunity to purchase this Behringer VAL350NC circular metal saw. Please contact us for further details. • Cutting capacity round: 115 mm • Cutting capacity rectangular: 200 × 70 mm • Cutting capacity square: 105 × 105 mm • Saw blade diameter: 350 mm • Saw drive power: 6.5 / 8.0 kW • Control system: BEHRINGER PLC control • Lubrication: Micro-spray system Csdpfx Aeykravoa Tjpw • Controlled zero edge (zero stop) • Cutting waste extension • Machine light • Vertical main clamping • Backstop (reverse lock/pawl) • Prepared for extraction system Additional Equipment • Infeed roller conveyor: approx. 5000 mm (custom-made)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Cpedpfx Aajx D Drcs Tew Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, tinggi total: 3.600 mm, beban meja: 6.000 kg, berat keseluruhan: 20.000 kg, kecepatan spindel (maks.): 8.000 rpm, daya motor spindle: 15.000 W, jumlah sumbu: 3, This 3-axis Johnford DMC-1600 was manufactured in 2008. It features a robust table area measuring 1700x1100 mm with a load capacity of up to 6000 kg. With travel paths of X1600 mm, Y1100 mm, and Z800 mm, it offers extensive machining possibilities. The spindle operates at 8000 revolutions per minute with a BT40 taper and is supported by a 24-position tool magazine. Additional features include a chip conveyor, a coolant system, and a comprehensive set of tools. Contact us for more information about this machine. Additional Equipment • Electronic handwheel • USB-RS232 ports • Air-conditioned cabinet • Through-spindle coolant supply • 3-color status light • Chip conveyor + shovel • Complete documentation • Angle heads • Large set of approx. 60 tool holders and cutting tools Machine Advantages Technical Machine Advantages • Spindle/table distance: 150-950 mm • Rapid traverse speed: 15000/12000 mm/min • Table area: 1700x1100 mm • Tool magazine: random-access tool magazine with 24 stations Additional Information Machine still under power Cpedeyaiv Topfx Aa Tsw Dimensions Machine Depth 6465 mm

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 1.500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 17.000 kg, tinggi total: 3.395 mm, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 3.000 rpm, beban meja: 6.000 kg, jumlah sumbu: 4, GORATU G Master 31 4-sumbu ini diproduksi pada tahun 2006. Mesin ini dilengkapi dengan meja besar berukuran 3000 x 900 mm, dengan kapasitas beban maksimum 6000 kg. Mesin menawarkan lintasan sumbu yang besar: 3000 mm pada sumbu X, 900 mm pada sumbu Y, dan 1500 mm pada sumbu Z. Mesin ini memiliki penukar alat dengan 24 posisi dan motor utama yang bertenaga 22/27 kW. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Keunggulan Mesin Keunggulan Teknis Mesin: • Dimensi meja: 3000 x 900 mm • Alur T: 5 x 22 x 160 mm • Kecepatan gerak cepat: 20000 mm/menit • Penukar alat: 24 slot Informasi Tambahan Mesin masih terhubung listrik Cpsdpfx Aeyar I Ssa Tew Dimensi Kedalaman mesin: 8100 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, daya motor spindle: 13.000 W, kecepatan spindel (maks.): 6.300 rpm, jumlah sumbu: 2, en-GB Codpoyffgrjfx Aa Tjpw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, This optimizing cross-cut saw was manufactured in 2025. It features a robust frame with a specially inclined support surface for easier loading and alignment, as well as a high-precision sliding system. The saw unit is equipped with a carbide-tipped circular saw blade and adjustable cutting speed. The machine comes with a computer running CNC software, which enhances productivity and safety. Take advantage of this opportunity to purchase the Salvador Superpush 200. Contact us for more information about this machine. Cpedeyaikdepfx Aa Tow Additional Equipment • Output table: Made from solid steel with a 30° incline. Length: 3,000 mm. • Safety features: Rear protective cover, double dust protection, and automatic lubrication. Machine Advantages Qualitative Advantages • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Dimensions of pusher: 300 x 345 x 25 mm • Feed speed: adjustable, maximum feed speed of 60 m/min • Pusher drive system: brushless DC servo motor with electronically controlled feed. • Productivity increase: boosts productivity and improves wood yield. • Reliability features: robust construction with a thick, reinforced steel frame. • Processing accuracy: two electro-pneumatic alignment devices ensure square cuts. Technical Machine Advantages • Special inclined surface at 30°, intelligent clamping, and automatic lifting pusher during scanning. • Windows-based software with a 22" LED color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-controlled CNC system. • Software: Linux-based optimization algorithm with a Windows 10 interface. • PC functions: intuitive S4U software, extensive customization options, real-time updates, fault detection, and remote maintenance software. • Saw motor power: 5.5 kW • Saw blade type: carbide-tipped circular saw blade • Blade diameter: 500 mm • Number of teeth: Z=108 • Board length before cutting: max. 4,100 mm, min. 500 mm Additional Information Machine is still under power. Please contact us for consultation and a customized quotation.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 5.590 h, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 850 mm, kecepatan spindel (maks.): 16.000 rpm, daya motor spindle: 64.000 W, jumlah sumbu: 5, This 5-axis C.B. Ferrari GT2000 vertical machining center was manufactured in 2019. It features a 5-axis CNC control system with a Heidenhain TNC 640, offering extensive travel distances of 2,000 mm on the X-axis and 850 mm on the Z-axis. The machine is equipped with a 30-position tool magazine and an electrospindle capable of 16,000 rpm. Take advantage of this opportunity to purchase the C.B. Ferrari GT2000 vertical machining center. Contact us for further details. • Continuous head support • Spindle: • Type: Electrospindle • Tool interface: HSK-A63 • Torque: 170 / 236 Nm • Tool system: • Tool magazine: 30 positions, rotary design • Table: • 1-axis rotary table • Table size: 1,840 mm • Cooling and lubrication: • Spindle cooling with emulsion • High-pressure coolant system: 75 bar • Coolant tank capacity: 460 liters • Air cooling system • Ball screw lubrication for high production rates Additional equipment: • Chip conveyor • Heidenhain handwheel with remote control • Blow-off gun with pump Codpoyh Nb Nofx Aa Tjpw • Mechanical probing device • 3D probe pre-installation • Electrical pre-wiring for 3D probe • Industry 4.0 preparation package • Air-cooled spindle chiller unit • Frequency inverter for spindle – Option 42

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jumlah sumbu: 4, kecepatan spindel (maks.): 18.000 rpm, en-GB Cpodpfxjx D Ribs Aa Tow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 4, This 3-axis CHIRON DZ 18 W Vertical Machining Center was manufactured in 2021. Consider the opportunity to purchase this CHIRON DZ 18 W Vertical Machining Center. Contact us for further information. Machine Advantages Technical Advantages • Traverse speed (x-y-z): 75 m/min • Spindle distance 400 mm Additional Information NC rotary table, type ATU 200, integrated in IWW Rotary feed-through for IWW Axes in the working area Twin-spindle headstock HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg VS drive X-Y-Z 75-75-75 m/min Automatic central grease lubrication Sinumerik 840D solution line, 10.4" color display Control Control interface RemoteLine SIE/MTX On-screen maintenance management For machining inclined surfaces, SIEMENS On-screen operating hours and workpiece counter Control cabinet cooler as door-mounted unit 3-color signal light Open-design fluid tower Oil-free maintenance unit Cooling unit Stop elements Chip conveyor, scraper belt 1050 mm, rear/08, left/15, 18, 200 l Coolant system KF400-FKA900/900 l, 70 bar Bridge for cables and hoses Machine preparation for internal flushing Flushing of fixtures in the machining station 1 rinsing gun outside of splash guard Working area flushing Additional equipment for extraction/extinguishing - Additional equipment for pneumatics/hydraulics - 1860 workpiece carrier control, coarse Hydraulic connection for 200 bar, single-acting Hydraulic connection for 200 bar, double-acting Regulated, oiled blow air connection Hydraulic power unit extension Additional equipment for measurement/tool breakage detection - Touch probe RLP40Q Whisker switch for tool breakage detection Additional devices for machine operation - Automatic loading door open/close Walk switch Additional equipment: NC control - Cpsdpfx Aaox D Nmxe Tjw M-function package Variable clamping logic - Siemens Powersave Siemens tool management Comfort cycle fixture rinsing Revolutionary feed Loader interface with Profinet Direct door detection in 'open' position Commissioning and training Power supply/compressed air 6 bar/ambient temperature 15°-40° C

Kondisi: bekas, de-1 Cedpsyrnviefx Aa Tjpw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Press hidrolik bekas dengan pemanasan induktif, untuk material padat diameter 12mm - 60mm Merek: GFU Tipe: HP 200 Tahun pembuatan: 2009 No. seri: 09/1025 Cpsdpfeycl Idox Aa Tjw dengan banyak aksesori

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1114.3705-24, Used CNC Lathe Manufacturer: Boehringer Cedpewlap Asfx Aa Topw Model: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine is equipped with the following features: - 1000 mm turning length - No tailstock - Driven tools - Special swiveling chuck - Siemens 840C CNC control The Boehringer VDF 250 Cm is a CNC lathe designed for chuck workpieces. It is distinguished by its robust construction and high-precision machining capabilities. Technical Specifications (1997 Model Year) Working Area: - Swing diameter over bed: 550 mm - Swing diameter over cross slide: 480 mm - X-axis travel: 405 mm - Z-axis travel: 1,099 mm - Maximum turning length: 1,000 mm (No) Tailstock: Tool Turret: - Number of stations: 12 - Tool holding: VDI 50 DIN 69880 - Driven tools: YES Spindle: - Spindle nose: 8 DIN 55026 - Spindle bore: 103 mm - Max. chuck diameter: 315 mm - Max. drive power (50% duty cycle): 53 kW - Max. torque: 780 Nm - Speed range: 30–3,000 rpm Feed Rates: - Automatic feeds: 1–10,000 mm/min - Rapid traverse speed: 10 m/min (X and Z axis) - Max. feed force: 15 kN Dimensions and Weight: - Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm - Machine weight: approx. 11,000 kg Equipment: - Swiveling control panel - HYDROKRAFT hydraulic system - Coolant system with 600 l tank, pump pressure max. 5.5 bar, flow rate 60 l/min, pump power 1.1 kW - Chip conveyor with 325 l tank capacity, right-hand discharge - 3-jaw power chuck - Oil mist extraction - Electrical cabinet with cooling unit and temperature control by RITTAL Control: - SIEMENS SINUMERIK 840 C Variants and Differences There are several variants of the VDF 250 series, such as the VDF 250 CU, which may feature different controls (e.g., PHILIPS B2T) and technical specifications. Some models are equipped with driven tools and a tailstock, whereas others are designed as pure chucking machines without tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe noted for its rigidity and precision. With its robust design and comprehensive features, it is ideal for processing chuck workpieces in various production environments.

Tahun pembuatan: 2013, Kondisi: bekas, This Rational Ultra Vent hood for Rational combination steamers, including connection kit, fits CMP, SCC 61/101 Electric combi steamers from model year 2011 up to the present (Index H+I). The hood has been inspected in our in-house workshop and is in full working order. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service technician, available throughout Germany. Looking for a specific Rational device type? Ask us – we have access to a large range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation and removal costs • Professional refurbishment / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or collection • Competent advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 regulations This Ultra Vent hood features patented condensation technology that binds and channels steam and vapors. Costly exhaust ventilation installations are a thing of the past. An external outlet is not required. Installation is simple and can even be done retroactively. Csdpeyrnipefx Aa Topw Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UC13075004314 Year of manufacture: 2013 Type: 60.72.320 Condition: used, fully functional Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have questions, need advice or want to see something on site? You can reach us by phone during our opening hours: Monday to Friday 09:00 – 13:00 and 14:00 – 17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Kondisi: bekas, Tahun pembuatan: 2020, Maximum turning diameter: 3,800 mm Spindle flange diameter: 1,900 mm Maximum swing diameter: 3,800 mm Control: Siemens 840 D sl Main spindle speed range: max. 100 rpm Main spindle drive power: 200 kW Maximum torque: 67,000 Nm Gear ratio: 1:30 Tool holder: Capto C8 Swiveling B-axis: 0 - 270° Driven tool position speed range: max. 6,000 rpm Maximum torque: 120 Nm Tool holder: Capto C8 Number of tool positions: 41 Maximum tool weight: 20 kg Maximum tool length: 400 mm Maximum tool diameter: 120 mm Chain pitch: 125 mm Tool holder: Capto C8 Number of tool positions: 25 Tool diameter when fully loaded: 150 mm Maximum tool weight: 20 kg Maximum tool length: 400 mm X-axis 1: 2,800 mm X-axis 2: 3,200 mm Z-axis: 1,000 mm Rapid traverse X: 32 m/min / Z: 20 m/min Feed force X/Z: 22 kN Total power requirement: 250 kVA Machine weight approx. 30 t Space requirement approx. 10.4 x 6.3 x 5.7 m CNC twin-spindle vertical turning lathe PITTLER PV 4000 - Control extension / software SINUMERIK 828D/840D SL ProgramSYNC software option - Retractable tread grating - Coolant circulation - Oil hose skimmer - SIEMENS Safety Integrated - Network interface / data transfer DNC option - Remote diagnostics for the NC area - Teleservice for integrated PLC of Sinumerik 840 D - Ethernet port in the control cabinet - Variable speed range to avoid vibrations - Air purifier, electrostatic precipitator - Measuring probe for in-process workpiece measurement Cpedpfxsyrhl Ds Aa Tow - Walk-in working area

Kondisi: bekas, Tahun pembuatan: 2021, Maximum turning diameter: 2,800 mm Spindle flange diameter: 1,100 mm Maximum swing diameter: 3,000 mm Cpodpfx Asyrhlwoa Tjw Control: Siemens 840 D sl Spindle speed range - main spindle: max. 230 rpm Drive power - main spindle: 206 kW Maximum torque: 53,000 Nm Tool holder: Capto C8, swiveling B: 0 - 270° Speed range - driven tool positions: max. 6,000 rpm Maximum torque (driven tool): 120 Nm Tool holder: Capto C8 Number of tool stations: 41 positions Maximum tool weight: 20 kg Maximum tool length: 400 mm Tool diameter (fully equipped): 150 mm Tool holder: Capto C8 Number of tool stations: 25 positions Tool diameter (fully equipped): 150 mm Maximum tool weight: 20 kg Maximum tool length: 400 mm Tool holder: Capto C8 X-axis 1: 2,700 mm X-axis 2: 2,700 mm Z-axis (2x 1,000 mm) Rapid traverse X: 40 / Z: 24 m/min Feed force X/Z: 22 kN Total power requirement: 200 kVA Machine weight approx.: 30 t Space required approx.: 10.4 x 6.3 x 5.7 m CNC twin-spindle vertical turning machine PITTLER - PV 2500 - Control extension / software: SINUMERIK 828D/840D SL ProgramSYNC software option - Retractable tread grids - Coolant circulation - Oil hose skimmer - SIEMENS Safety Integrated - Network interface / data transmission DNC option - Variable speed range for vibration avoidance - Air cleaner, electrostatic separator - Touch probe for in-process workpiece measurement - Walk-in workspace

Kondisi: bekas, de-hu Codpfxev Rgzws Aa Tspw

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 525 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.000 kg, tinggi benda kerja (maks.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – In Excellent Technical and Visual Condition The machine has undergone comprehensive and professional refurbishment at our facility and is in very good condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely renewed. In addition, the machine received a complete new paint finish and presents itself in a very well-maintained visual condition. The generator and control system were cleaned and technically checked. The generator’s cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection specifications. The machine is immediately ready for use and ideally suited for reliable production operation. Technical Data: Csdpfx Aeyrqpfsa Tspw Manufacturer: Ingersoll (OPS Ingersoll) Type: Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of Manufacture: 2009 Control System: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional hand control unit Manual EDM operation with Powertec Handheld High-speed jump max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special Features: Linear measuring systems on all axes (Z-axis standard)

Kondisi: sangat baik (bekas), 7853 TECHNICAL SPECIFICATIONS - Max. main saw blade diameter without scoring unit: 400 mm - Max. main saw blade diameter with scoring unit: 350 mm - Main saw blade adjustable electrically (height/tilt) - Arbor diameter: 30 mm - Arbor lock - With sliding table - With side table + angle stop - Sliding table length: 3000 mm - Cutting width with rip fence: 1350 mm - With side table Cjdex H S Tijpfx Aa Tjpw - With scoring saw - Max. scoring blade diameter: 120 mm - Scoring motor: 0.75 kW - Main motor: 6 kW - Height adjustment motor: 0.25 kW - Tilt adjustment motor: 0.25 kW - 3 spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650 mm - Table extension/expansion: 1920x1450 mm - Large blade guard - Dust extraction port diameter: 80 mm, 125 mm - Overall dimensions (LxWxH): 3500x3460x1500 mm - Weight: 1000 kg FEATURES - Manufactured in Poland - Equipped with scoring unit - DTR documentation + CE certified - Used saw, condition: very good Net price: 23,900 PLN Net price: 5,690 EUR (based on exchange rate 4.2 EUR) (Prices may vary with currency fluctuations)

Kondisi: sangat baik (bekas), 7863 Codpfx Aajx U Tp Ie Tjpw

Kondisi: sangat baik (bekas), 7541 Cpjdpsyaq Nhefx Aa Tsw Technical specifications: - Max diameter of main saw blade (without scoring blade): 400 mm - Max diameter of main saw blade (with scoring blade): 350 mm - Blade bore diameter: 30 mm - Max cutting height for 400 mm blade: 90°, 120 mm; 45°, 85 mm - Max cutting height for 350 mm blade: 90°, 95 mm; 45°, 67 mm - Main blade adjustable vertically and for angle - Saw blade guard - Including side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at rip fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table elongation: 1890 mm - With scoring blade - Max diameter of scoring blade: 120 mm - Scoring spindle diameter: 20 mm - Scoring motor: 0.75 kW - 3 spindle speeds: 3500 / 4500 / 6000 rpm - Brake - Extraction port diameter: 80 / 120 mm - Dimensions (L x W x H): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Saw blade guard – With scoring unit – With extension and widening – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (exchange rate: 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Kondisi: bekas, Tahun pembuatan: 2013, tinggi angkat: 3.100 mm, jenis bahan bakar: listrik, Drivetrain Drive: Wheel Weights Unladen weight: 4,670 kg Functional Lifting capacity: 150 kg Working height: 1,690 cm CE marking: yes Condition General condition: average Technical condition: average Visual condition: average Further information Delivery terms: EXW Transport dimensions (L x W x H): 2.98 x 1.21 x 2.25 m Additional information Please contact Christian Theißen for further details. Cpsdpev Tkf Eefx Aa Tsw Manufacturer: PB Lifttechnik Model: S171-12E Year of manufacture: 2013 Product type: Used Specifications: Max. working height: 16.90 m Max. platform height: 14.90 m Lift capacity: 400 kg Lift capacity on extension: 150 kg Drive type: Battery Platform dimensions L x W: 2.80 x 1.20 m Platform length extended: 3.80 m Overall dimensions L x W: 2.98 x 1.21 m Transport height with guardrail: 3.10 m Transport height without guardrail: 2.25 m Drivable up to working height: 16.90 m Ground clearance: 0.14 m Own weight: 4,670 kg Features: White non-marking tyres, exclusively for indoor use, anchor points for personal fall protection equipment (PPE) available. Location: 41468 Neuss Immediately available