Beli Gabungan Mesin bekas (77.122)

Kondisi: bekas, Tahun pembuatan: 2016, Industrial Automatic Edgebanding Machine SOLUTION XD MAIN FEATURES “E TOUCH” CONTROL WITH AUTOMATIC PROGRAMMING: ONE “TOUCH” IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimum panel guidance Edgebanding of coil material, strip edges, and solid wood edges GENERAL FEATURES Single-sided edgebander in left-hand configuration for edgebanding coils and strips using all common hot-melt adhesives. The base frame consists of a robust welded steel frame with increased rigidity, providing optimal support for housing the processing units. The top pressure is made of thick-walled steel profile with a double trapezoidal drive belt, which is positioned automatically according to the panel thickness. Height adjustment is displayed both on the top pressure and on the operator’s console. Manual workpiece feed system with generously sized working line and enlarged support surface for easy introduction of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling unit. Machining units mounted on the pressure beam and mechanically linked to guarantee automatic adjustment when changing panel thickness. Lower processing units are fixed to the machine base or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency converters (inverters); each unit has its own inverter for optimal flexibility and improved production times. Bwedexy Tm Ijpfx Am Ijl Protective hood for all units located after the gluing station, with polycarbonate windows providing a clear view of the processing units during operation. Interior lighting of the hood, equipped with sound-absorbing material to reduce noise emissions during operation. Spacer at the infeed fence allows correct panel loading. The spacing is automatically adjusted according to the selected feed speed. Swiveling control panel positioned at the infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations. Electrical components are housed in a metal cabinet mounted to the machine frame with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide plates made of rubberized nylon, for optimal guidance and high durability. The chain runs on two guides made of hardened and ground steel—one round, one flat—to ensure straight panel feed and to prevent lateral deviation. Automatic lubrication of the chain, with lubricant amount controlled by the system according to panels processed. External roller conveyor running the entire length of the machine, with an extendable opening system (up to 650 mm) for panels with maximum width of 1200 mm. E-TOUCH PC control system for quick and easy handling of main functions including: – Processing programs in Just-in-Time mode – Option to manage via parts lists – Option for management through ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, de2en001 Bsdpfsy Hgxmsx Am Iowl

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Bsdevvkd Topfx Am Iowl

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Bwsdpovvkfdefx Am Iol Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Bedpfx Ajvvkfwjm Iswl

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Bwodpfxjxyiile Am Ijl Lokasi penyimpanan: Nattheim

Kondisi: bekas, Tahun pembuatan: 2022, termasuk 2 bak lem Ketebalan pelapisan tepi rol: 0,4 - 3 mm Ketebalan pelapisan tepi strip: 5 mm Tinggi benda kerja min - maks: 8 - 50 mm Kecepatan makan: 9 m/menit Unit pra-routing Unit lem Unit pemotong Unit pembulat Unit frais sejajar Pisau tarik radius Pisau tarik bidang Unit polisher Perangkat semprotan Lokasi penyimpanan: Pelanggan Bwedpfxjw Aig Ss Am Ijl

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 2.000 h, daya: 283 kW (384,77 hp), Perlengkapan: kabin, pendingin udara,

Kondisi: sangat baik (bekas), CATALOG NO. 7081 TECHNICAL DATA - JOINTER: - shaft width: 260 mm - table length: 1190 mm - cast iron fence adjustable for angle - adjustable tables THICKNESS PLANER: - max working height: 110 mm - thicknessing shaft guard from above: - anti-kickback fingers - feed roller, serrated - cutterblock - outfeed roller, smooth, feed - extraction port diameter: 85 mm CIRCULAR SAW: - max blade diameter: 160 mm - max cutting height: 25 mm - blade bore diameter: 30 mm - blade adjustable up/down - blade guard - max width of cut with fence: 160 mm - table size: 710x420 mm SPINDLE MOULDER: - spindle diameter: 30 mm - spindle adjustable up/down - spindle height: 110 mm - max tool diameter: 190 mm - fence - motor approx. 2.2 kW - dimensions (L/W/H): 1200x900x800 mm - weight: 325 kg ADVANTAGES – compact, takes up little space Bwedpfsx Swwdox Am Iol – very good condition – used multi-function machine Net price: 7,900 PLN Net price: 1,880 EUR at 4.2 EUR/PLN (Prices may vary with currency fluctuations)

Kondisi: baik (bekas), Tahun pembuatan: 2001, Spesifikasi Mesin Jumlah Sumbu: 9 Sumbu Kapasitas Diameter Batang Maks: 2,5" Jarak Antar Spindel: 50,4" Diameter Ayun Maks di Atas Tempat Tidur/Kereta: 33,4" / 23,6" Diameter Bubut Maks / Revolver Bawah: 21,6" / 11" Panjang Pemesinan Maks: 40,1" Chuck Spindel Utama: 10" Motor Spindel (HP): 30 / 20 HP Kecepatan Spindel: 4500 RPM Lubang Spindel: 2,99" Hidung Spindel: A2-6 Bsdoy Hx Iaepfx Am Iewl Ukuran Chuck Sub Spindel (Inci): 6" Motor Sub Spindel: 20 / 15 HP Kecepatan Sub Spindel: 6000 RPM Kapasitas Batang Sub Spindel: 1,7" Selengkapnya Perlengkapan Mesin C-Axis penuh pada Spindel Utama dan Sub Spindel Konturing 5-Sumbu penuh Revolver Bawah dengan Milling Kepala Milling dengan sumbu Y Chuck 10" pada Spindel Utama Chuck 6" pada Sub Spindel

Kondisi: sangat baik (bekas), Mesin serbaguna, format, ketebalan SCM Casadei Model: C 30 C Ketebalan 3KW: - lebar 30cm - tinggi maksimum sekitar 200mm - 3 pisau - 1 kecepatan makan Rabot: - lebar 30cm - panjang meja 150cm - 3 pisau - pagar sudut dapat disetel Router 3KW: - poros diameter 40mm - spindle naik-turun disetel - 4 kecepatan - meja samping bergerak - pagar dapat disetel Bwjdey Eyhrepfx Am Isl Gergaji format 3KW: - alat scoring - dapat diatur naik-turun dan 0-45° - meja luncur 225cm - penggaris di meja samping - diameter gergaji maksimum 315mm Bor horizontal: - meja diatur naik-turun, depan-belakang, kiri-kanan Mesin memiliki 3 motor Daya 380V Mesin bekas kondisi baik, siap kerja, konstruksi serbaguna dan kokoh.

Kondisi: sangat baik (bekas), de_Maschine_BaeuerleKFL Bsdpfxexwbpfj Am Ijwl

Kondisi: Pembawa suku cadang rusak (bekas), Left surface grinding attachment, roller diameter: 100 mm Bwedswvt I Hjpfx Am Iol Sanding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180 / 10 x 250 mm Right contact grinding wheel, 200 mm diameter, sanding belt dimensions: 50 x 2000 mm Two spindle speeds via pole-changing motor: 11,450 / 2,900 rpm Drive motor: 380 V, 0.9 / 1.3 kW Required space: 1,000 x 400 x 1,800 mm Weight: 140 kg

Kondisi: baru, Robust steel-grey cast iron construction High-precision format sliding table made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade tiltable to 45° Large squaring frame (960 x 600 mm) with extendable aluminum telescopic fence up to 2660 mm Strongly ribbed, cast iron jointer tables, annealed and stress-relieved for decades of stability and flatness Helical-toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Max. cutting depth: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed rate: 7 m/min Max. cutting depth: 4 mm Extraction port diameter: 4 x 120 mm Cutterblock type: TERSA (3 knives) Cutterblock diameter: 72 mm Spindle speed: 5200 rpm Sliding table cutting length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Saw blade tilting: 90 – 45° Max. cutting height at 90°: 90 mm Bedpfx Ameiiynno Ijwl Max. cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and table: Format sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Max. shaping tool diameter (lowered/not lowered): 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Approximate machine weight: 560 kg INCLUSIVE OPTIONS - Handwheel with gravity numeric display for thickness table positioning - Sliding table length 2600 mm - Professional fences - TERSA planer cutterblock - Spindle moulder with reverse and forward rotation

Kondisi: sangat baik (bekas), MESIN GERGAJI MEJA Panjang gerobak: 1250 mm Skor Unit pemotong dapat dimiringkan hingga 45° Pengangkatan dan penurunan pisau secara manual Daya motor: 2,2 kW MESIN FREIS BAWAH Spindle diameter 30 mm Pengangkatan dan penurunan spindle manual 2 kecepatan putar: 4500/6000 rpm PLANER–THICKNESSER Lebar kerja: 300 mm Poros 3 pisau Bwsdpfjyymgdsx Am Isl Pisau tradisional Ukuran meja: 1500x300 Ukuran meja thicknesser: 300x600 MESIN BOR HORIZONTAL 460 kg Tahun 2009

Kondisi: baru, Tahun pembuatan: 2025, Our C300 5-function combination machines are distinguished by a robust frame constructed from bent and electro-welded steel sheet. The thick cast iron tables are carefully ground and milled, and all materials used are certified to ensure maximum quality. The units are equipped with three self-braking motors, each individually protected, with adjustable power output from 3 hp to 4 hp, depending on specific requirements. The sliding table, made of milled and anodized aluminum with substantial thickness, can vary in length according to the model or individual needs. It runs on steel balls along a steel guideway, with adjustable settings to ensure optimal smoothness. Standard equipment includes a 1600 mm sliding table, with optional tables available up to 2200 mm. The C300 is the ideal choice for the hobbyist, and indispensable for the professional restorer. Built to standards above the average in its class, it maintains a price-to-quality ratio that makes it highly competitive on the market. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Working table mm 300×1500 Cutterhead diameter mm 70 Cutterhead speed rev/min 5700 Number of knives no. 3 Knife dimensions mm 300x25x3 Max table adjustment mm 4 THICKNESSER Working table mm 300×660 Max stock removal mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Min wood passage mm 4 Cutterhead speed rev/min 5700 CIRCULAR SAW Working table mm 220×1000 Blade speed rev/min 4500 Blade diameter mm 250 Blade bore mm 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0°–45° Bwjdpfxeuzxh Ie Am Iol Max width between blade and fence mm 560/700 Scoring blade mm 90 Scoring blade bore mm 22 Scoring speed rev/min 7000 MORTISER Working table mm 500×250 Longitudinal stroke mm 205 Transversal stroke mm 95 Vertical stroke mm 90 Chuck diameter mm 16 Spindle speed rev/min 5700 VERTICAL SPINDLE MOULDER Working table mm 220×1000 Spindle speed rev/min 2000/3100/4400/7000 Standard spindle diameters mm 30/35/50 Spindle length mm 105 Spindle vertical stroke mm 115 Max tool diameter mm 160 Max tenoning depth mm 55 STANDARD EQUIPMENT Subframe, outrigger extension mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 OPTIONAL ACCESSORIES Single-phase motor KW/HP 4.0/3.0 Sliding table mm 2200×315 LIST PRICE EXCLUDING VAT

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 96 mm, diameter mata gergaji: 300 mm, lebar perataan: 300 mm, tegangan masuk: 400 V, daya: 3 kW (4,08 hp), frekuensi input: 50 Hz, panjang meja geser: 2.250 mm, SAMCO CU 300K bekas adalah mesin kombinasi pengolahan kayu serbaguna untuk aplikasi profesional. Mesin ini menggabungkan beberapa fungsi pemrosesan dalam satu unit dan sangat cocok untuk bengkel dengan ruang terbatas. Meskipun tahun produksinya lama, konstruksinya kokoh dan menawarkan performa andal untuk penggunaan harian. Perlengkapan mesin Unit gergaji bundar Joiner/pengerjaan permukaan kayu Planer tebal Unit router (fräseinheit) Bwodpeyyltiefx Am Iel Data teknis lainnya Tinggi planer tebal: 230 mm

Kondisi: baru, Planer Thicknesser HOLZKRAFT fs 52es digital TERSA - Showroom Machine - TERSA Cutterblock, electric height adjustment, digital readout for planing thickness ----- Technical Data ----- Planing width: 520 mm Thicknessing table size: 850 x 520 mm Table length: 2,250 mm Max. cutting depth: 5 mm Bwodpfxsu R Szto Am Ijl Cutterblock diameter: 120 mm Number of knives: 4 Passage height: 240 mm Min. workpiece thickness: 3 mm Feed speed: 5 / 8 / 12 / 18 m/min Cutterblock speed: 5,000 rpm Extraction nozzle diameter: 120 mm Motor power 400 V: 9.5 HP / 7.0 kW Weight: 695 kg - new showroom machine -

Kondisi: baru, Tahun pembuatan: 2025, en_K5-250-1300-Specs Bsdpfsvz E Sisx Am Iswl

Kondisi: bekas, Tahun pembuatan: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Jointing milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Flush trimming unit (top and bottom) RS-100 2-motor multifunction/form milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Maximum workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness, coil: 0.4–3 mm Edge thickness, strips: 0.4–22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Edge banding extraction connection: 80 mm Jointing milling extraction connection: 120 mm Glue tank capacity: approx. 3 kg Heating time with 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Bwodov R Nk Uopfx Am Iel Location: Flörsheim

Kondisi: siap digunakan (bekas), MESIN GERGAJI Panjang meja geser 1600 mm Tinggi pemotongan 75 mm Pisau pendahulu (scorer) Unit pemotongan dapat dimiringkan 45° Pengangkatan dan penurunan gergaji secara manual MESIN FREIS POROS BAWAH Poros Ø30 mm Tinggi poros 90 mm Pengangkatan dan penurunan poros secara manual Kecepatan putar: 3500/6000/8000 rpm MESIN PENYERUT JOINTER-THICKNESSER Bedpfeyt E R Hjx Am Iewl Lebar kerja 300 mm Tinggi maksimum penebalan 200 mm Poros 3 Pisau Pisau konvensional MESIN BOR HORIZONTAL 550 kg 220 V Tahun 2016

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2540 x 2900 x 850 mm Weight: 1200 kg Total power requirement: 5.5 kW 5-function combination machine K5 410-2540 Saw-Moulder-Planer-Thicknesser-Mortiser Surface Planer: - Max. planing width: 410 mm - Total table length: 1800 mm - Max. cutting depth: 5 mm - Planer fence dimension: 1100 x 155 mm - Planer fence tiltable from 90° to 45° - Safety cutterblock with reversible knives Ø 100 mm, 4 knives - Speed: 4500 rpm - Motor for planer and thicknesser: 4.0 kW / 400 V Thicknesser: - Max. thicknessing width: 405 mm - Length of thicknesser table: 700 mm - Max. cutting depth: 4 mm - Min. / max. working height: 4 / 225 mm - Feed speed: 6 m/min - Extraction port: Ø 120 mm Panel Saw: - Max. cutting length: 2540 mm - Max. cutting width: 1100 mm - Max. cutting height at 90°: 103 mm - Max. cutting height at 45°: 72 mm - Min. / max. saw blade diameter: Ø 250 / Ø 315 mm - Speed: 4000 rpm - Parallel fence length: 1100 mm with fine adjustment - Saw blade tiltable 90° - 45° - Motor: 4.0 kW / 400 V - Extraction port: Ø 120 mm - Scoring unit: 0.75 kW, speed 8000 rpm - Scoring blade diameter: 120 mm - Robust outrigger table with angle-adjustable telescopic fence extendable to 3500 mm, including 2 flip stops - Sliding table with prism guide, width 350 mm Spindle Moulder: - Spindle diameter: Ø 30 mm - Spindle tiltable 90° - 45° to the rear - Spindle adjustment: 175 mm - Clamping height of spindle arbor: 125 mm - Forward / reverse rotation - Max. tool diameter: Ø 300 mm - Interchangeable spindle MK 4 Bwjdjvz E Ikjpfx Am Isl - Distance spindle to front edge of table: 550 mm - Table opening: Ø 260 mm - Max. tool diameter under table: 250 mm - Two-speed motor: 4.5 / 5.5 kW / 400 V - Speeds: 3000 / 4000 / 5000 / 6000 / 8000 / 10000 rpm - Fence with integrated 500 mm ruler - Extraction ports: 2 x Ø 120 mm Slot Mortising Unit: - Westcott drill chuck 0 - 16 mm - Table dimensions: 250 x 370 mm - Longitudinal travel: 160 mm - Cross travel: 160 mm - Max. height adjustment: 120 mm - Dimensions: L = 2540 mm, W = 2900 mm, H = 850 mm - Weight: 1200 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, I am selling a combined machine, sliding table saw with scorer + spindle moulder. Manufacturer: FELDER Austria Model: KF700S Year of manufacture: 2011 Bjdpfx Amjr Alzpe Ijwl Cutting length: 3200 mm Saw blade and spindle moulder tilt 0-45°, manual Saw blade and spindle moulder height adjustment: digital Digital display for fence and working heights Main saw blade and scorer activated from the aluminium sliding table. Main motor, sliding table saw: 3.0 kW (3200/4500/5800 rpm adjustable) Scorer motor, sliding table saw: 0.75 kW Main motor, spindle moulder: 5.5 kW Tools, options, and accessories shown in the pictures are included in the price. Very good condition. Available immediately. Includes full documentation and CE certificate.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, For sale is a used Hammer circular saw and spindle moulder B3Winner Comfort with a cutting length of 2000 mm. The machine is in excellent condition and has been serviced and checked by our specialist staff. (Fully functional) Technical specifications: Bsdpfxsv Sbpxo Am Iowl - Tilting circular saw and moulder 90-45° - Sliding table 2000 mm - Outrigger table with angle index raster - Mitre fence 1300 mm - 4 spindle speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - Dual-motor, each 5.5 HP (4 kW) 400 Volt - Year of manufacture: 2019 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: circular saw, spindle moulder, milling machine, combination machine Reference: R-L0AHG

Kondisi: bekas, kk-01 Bwjdpewzbcvefx Am Iel