Beli Gesekan Untuk Léger bekas (24.661)

Kondisi: baru, Tahun pembuatan: 2026, Panjang potong horizontal maksimum: 4200 mm Tinggi potong vertikal maksimum: 2200 mm Tinggi potong horizontal maksimum: 2080 mm Iodjxga H Iepfx Alcsib Ketebalan potong maksimum: 60 mm Daya motor: 5 HP (3,7 kW) Diameter pisau: 250 mm Kecepatan pisau: 5300 rpm Tampilan digital horizontal Tampilan digital vertikal

Kondisi: sangat baik (bekas), Binder temperature test chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder temperature test chamber MK 240, suitable for professional heat and cold testing in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are specifically designed for cyclic temperature tests and reproducible measurements under defined environmental conditions. This test chamber enables temperature tests in the range of -40 °C to +180 °C and offers an efficient alternative to customized special solutions. Technical Data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: Iiodoy Nic Hopfx Alceb approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x access ports Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following procedures are carried out on our offered chambers before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: Scope of delivery as per images Inspection by appointment possible. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted.)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Table length: 3000 mm Table width: 1300 mm Table opening: 400 mm Iedpji E Tz Hefx Alcsib Cylinders: 6, diameter 70 mm Pressing force: 90 tons Power: 21 kW Heating: Diathermic oil

Kondisi: sangat baik (bekas), Binder temperature test chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are particularly suitable for cyclic temperature tests and reproducible examinations under defined environmental conditions. This test chamber enables temperature testing in the range from -40 °C to +180 °C and provides an efficient alternative to custom special solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical data: Nominal voltage: 400 V Line frequency: 50 Hz Nominal power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Isdey Nicmjpfx Alcoib Weight: approx. 320 kg Condition: Used Scope of delivery: Scope of delivery as per images Inspection by appointment possible. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Kondisi: baik (bekas), de.hu.it.lt.lv.nb.nl.pl Iiedpfx Aoy Ndrvelcsb

Kondisi: bekas, - Tipe oven: Cervap - No. seri: 17280 - Tahun: 04/04/1990 - Dimensi pelat: 750x1860 mm - Permukaan pemanggangan: 5,5 m2 - Panel kontrol elektromekanis - 4 pintu pemuatan - Dengan loader/proofer elevator - Tegangan: 220V satu fasa + ground - Daya: 0,6 kW - Antarmuka elektromekanis - Semua oven Cervap dilengkapi dengan antarmuka ini sebagai standar - Indikator visual operasi oven - Regulator suhu - Timer pemanggangan - Sakelar On/Off - Injeksi uap Iiedpfx Alsw Eivfecsb - Kontrol pembukaan katup - Timer uap depan - Timer/jam mulai tertunda

Kondisi: baik (bekas), Tahun pembuatan: 2022, Tangki minyak pemanas, 27.000 liter untuk minyak pemanas / solar – bekas - : Harga: hanya €9.950 (netto), ex lokasi, sudah dikosongkan, dibersihkan, dan termasuk pemuatan! Produsen: Kampitz Iiodpfx Aey I Ry Delcsb Nomor produsen: 42089 Tahun pembuatan: 2022 Tipe: Z 38 12-312 Kapasitas pada level pengisian yang diizinkan: 27,82 m3 Tingkat pengisian maksimum: 95% Material (dalam dan luar): S 235JR Kelas bahaya: FP > 55°C Kepadatan yang diizinkan: 1,0 kg/ltr. Tekanan uji ruang penyimpanan: 2,60 mWs Tekanan uji ruang pengawasan kebocoran: -0,60bar Temperatur media maksimum: 50°C Media: minyak pemanas / solar Kondisi: baik Tersedia: segera Lokasi: Bünde, NRW

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, jam operasional: 288 h, kapasitas angkut: 2.000 kg, tinggi angkat: 8.500 mm, pengangkatan bebas: 3.000 mm, pusat beban: 600 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 3.950 mm, produsen motor: ELECTRIC, tipe perpindahan gigi: otomatis, lebar kerangka garpu: 1.000 mm, panjang garpu: 1.150 mm, lebar garpu: 100 mm, ketebalan garpu: 40 mm, kondisi ban: 100 persen, Tipe ban depan: ban padat (hitam), ukuran ban depan: 16 1/4 x 7 x 11 1/4, tipe ban belakang: ban padat (hitam), ukuran ban belakang: 18 x 7 x 12 1/8, berat keseluruhan: 8.900 kg, berat kosong: 6.900 kg, tinggi total: 2.250 mm, panjang total: 2.700 mm, lebar total: 1.250 mm, warna: kuning, Perlengkapan: Penandaan CE, garpu palet, geser samping, pelindung depan, pelindung kepala, pencahayaan, AISLE MASTER 20SHE – 2014 | 288 GODZIN PRACY | ELEKTRYCZNY | TRIPLEX 8500 mm Gotowy do pracy od pierwszego dnia – bez inwestycji, bez ryzyka ⚙️ --- ### Dlaczego ten wózek widłowy? 🚀 Szukasz maszyny, która nie zakłóci Twojej pracy? Ten AISLE MASTER 20SHE to sprawdzona jednostka po pełnym przeglądzie – gotowa do natychmiastowej pracy, bez ukrytych kosztów. ✔ Po pełnym serwisie (wymiana olejów, filtrów, kompleksowa kontrola wszystkich podzespołów) ✔ Stan techniczny i wizualny: jak nowy ✔ Tylko 288 motogodzin – rzeczywiście niewielki przebieg ✔ Nowe opony – brak dodatkowych nakładów --- ### Kluczowe parametry 📊 * Udźwig: 2 000 kg * Napęd: ELEKTRYCZNY ⚡ * Maszt: Triplex – 8 500 mm * Pozycjoner wideł: 1 000 mm * Długość wideł: 1 150 mm * Kabina: otwarta * Wysokość podnoszenia swobodnego: 3 000 mm --- ### Pełna specyfikacja techniczna 🔧 Dane ogólne: * Rok produkcji: 2014 * Przebieg: 288 MTH * Udźwig: 2 000 kg * Środek ciężkości: 600 mm * Masa własna: 6 900 kg Maszt i podnoszenie: * Typ masztu: Triplex * Wysokość podnoszenia: 8 500 mm Widły i osprzęt: * Pozycjoner wideł: 1 000 mm * Długość wideł: 1 150 mm Wymiary: * Wysokość: 2 250 mm * Długość: 2 700 mm * Szerokość: 1 250 mm * Całkowita wysokość: 3 950 mm Podwozie: * Opony: super elastyczne (100%) – nowe * Przód: 16 1/4 x 7 x 11 1/4 * Tył: 18 x 7 x 12 1/8 Wyposażenie: * Otwarta kabina * Przesuw boczny * Swobodny wznios Stan: * Techniczny: 5/5 – po pełnym serwisie * Wizualny: odnowiony, jak nowy, bez korozji --- ### Idealny dla: 🏭 ✔ Magazynów z wąskimi korytarzami ✔ Branży drzewnej, stalowej i rur Ijdpfjy R Rbtox Alcoib ✔ Przemieszczania długich ładunków ✔ Pracy wewnątrz i na zewnątrz --- ### Co kupujesz 💡 Nie kupujesz „używanego wózka widłowego”. Kupujesz w pełni przygotowaną i sprawdzoną maszynę: ✔ Każda jednostka przechodzi pełne testy przed sprzedażą ✔ Gotowa do natychmiastowego wdrożenia ✔ Możliwość prezentacji online na żywo 🎥 ✔ Transport bezpośrednio pod wskazany adres 🚛 --- ### Dostawa i serwis 🌍 * Transport na terenie całej Europy * Pełne wsparcie logistyczne * Pomoc w leasingu / finansowaniu * Wsparcie posprzedażowe --- ### Dlaczego FT LOGISTICS? 🤝 Dostarczamy wózki, które pracują – nie takie, które stoją w serwisie. ✔ Ponad 100 maszyn dostępnych od ręki ✔ Własny serwis i przygotowanie ✔ Doświadczenie na rynku europejskim ✔ Setki zadowolonych klientów --- ### Skontaktuj się z nami już teraz 📞 FT LOGISTICS – Jakość, na którą możesz liczyć. Serwis, któremu możesz zaufać.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 400 mm, tinggi total: 690 mm, panjang total: 600 mm, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, kebutuhan tinggi: 900 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The LAS 22 is a compact tabletop unit with a small working area, making it ideal for small components or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The unit is very easy to operate and requires no programming knowledge. With its powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos with just a few clicks—all without extensive programming skills. The software can automatically increment serial and article numbers after prior configuration. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a hand scanner is also possible. Isdey I Nbmjpfx Alceib Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Mesin bor otomatis Jet Smart adalah solusi ideal bagi pengrajin serta usaha kecil dan menengah. Fleksibilitas, kecepatan, dan kemudahan penggunaan adalah fitur utama dari mesin ini yang memastikan produktivitas tinggi dan hasil pengeboran sempurna di segala kondisi kerja. Pengeboran cepat dan presisi! Pengeboran dari atas: pilihan tanpa kompromi! Sambungan tersusun sempurna tanpa kesalahan berkat pembacaan otomatis dimensi benda kerja, yang memungkinkan koreksi perbedaan antara panjang panel nyata dan pengaturan. ///Rincian teknis Dimensi maksimum benda kerja - 3050x900x60 mm Dimensi minimum benda kerja - 200x70x10 mm Kecepatan maks. sumbu X-Y - 40-40 m/menit Iiedpfx Aljy Rl Arocsb Kepala bor: spindle vertikal / horizontal, pisau X - 12 / 6, 125 mm Elektrospindel (S6) - 5,5 kW (7,5 HP) - 18.000

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 34 kW (46,23 hp), tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure shift-free transport. Panel conveyor Long, heat-treated semicircular guide rail allows perfect contact with the conveyor, with zero play. The conveyor is fixed to the machine frame for stability when handling wide panels, with a maximum extension width of 600 mm. Narrow parts package Feed package for narrow components, ensuring minimum edge width of 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43 mm height. Two pneumatically controlled motors (2 x 3.7 kW), intermittent edge milling on the panel. Panel preheating unit x2 Heats the workpiece edge so the adhesive melts properly—ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel end for better bonding. Edge band support x2 Large support, optimally positioned for easy feeding and long service life. Edge band cutting unit x2 Pneumatically operated guillotine with electric switch for precise end trimming of the edge band. Premelt glue application unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps adhesive fresh. Automatic glue pumping + 25kg tank Glue is automatically pumped to the upper reservoir when levels fall below the sensor. Edge band cutting unit Pneumatically operated guillotine with electric switch for precise trimming at the end of the edge band. 2 sets of pressure rollers One 100 mm pre-press roller combined with four trailing rollers ensure secure pressing. Lubrication system Lubrication pump for daily maintenance, greasing the guide rail with a simple lever action. End trimming unit Linear guide structure at 45°, with 2 motors of 0.35 kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is virtually zero. R1.5 diamond knives. Corner rounding unit Designed for rounding the edges of the edge band at ends and along the length to achieve circular radius R. 2 scraping units with pneumatic movement Two sets, each with different radius knives (one set R1.5, the other R1). Extraction system Each unit has an independent extraction port (125 mm), total 6 ports. Glue scraping and cleaning unit (straight) Removes edge band debris, followed by straight scraping to remove adhesive residue from the top and bottom surfaces. Spraying unit – cleaning agent Separation agent applied before pre-milling prevents glue from sticking to the panel surface. 2 sets of polishing units Designed for two glue colors (dark and light) to avoid contamination. Solution for narrow parts Allows processing of workpieces: 120x120 mm (all 4 sides), 200x40 mm (long side), 40x200 mm (short side). Additional conveyor roller Solid support for large or inline panels. PUR device 2KG/20KG – 6,500 EUR + VAT Iiedpfx Aljy Rlbnscsb Temperature control system with touch screen and even heating. Polyurethane (PUR) adhesive technology ensures superior bonding performance.

Kondisi: bekas, nomor mesin/kendaraan: LC596, Complete Used Still Wine Bottling Line - 5000 BPH Technical Specifications & Performance Data This used bottling line is configured for handling glass bottles and includes a comprehensive sequence from filtration to cartoning and palletizing. It is a second-hand solution designed for industrial packaging and beverage production, integrating well-known European manufacturers. Configuration includes rinsing, filling, closing (flush cork closure and aluminum screw caps), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging. Container type: Glass bottles Core Monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (Rinsing–Filling–Capping) Filtration: Seitz Orion plate filtration unit Bottle Preparation: SICK Blancamat 8 bottle washer (for pre-labeling) Capsule Application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate) Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labeler Conveying/Accumulation: MBF accumulation table (conveyor) Carton Handling (Option Set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizer Carton Handling (Option Set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserter Ijdpsyhbhqefx Alceib Auxiliaries: PREO E0P051 4R2 hotmelt units, Ber PDC 30 case scale Key Component Years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30) Certifications: CE markings on Mas Pack modules Advanced Automation and Control Systems The line combines automated capsule application, multi-station adhesive labeling, and end-of-line case forming, gluing, and packing. Modules are equipped with integrated safety circuits and CE-compliant controls. Hotmelt application is performed by PREO melters for reliable carton sealing. Fast adjustments at the labeling stations and for format changeovers enable efficient transitions within the glass bottle family. - Adhesive labeling with multi-station control - Automated capsule application - Hotmelt application via PREO E0P051 4R2 units - CE compliance for Mas Pack equipment - User-friendly HMIs/controls at packaging modules (per module) Production Line Integration Options Designed for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyor accumulation table supports buffer management for a consistent flow between wet and dry areas.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Tinggi pemotongan maksimal: 120 mm Iodpfx Aey Sg Ufslceib Kedalaman pemotongan maksimal: 50 mm Lebar pemotongan maksimal: 260 mm Diameter spindle: 40 mm Daya motor: 11 kW Kecepatan putar spindle: 5400 rpm Kecepatan umpan: 0-3,5 m/menit Berat: sekitar 400 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, For sale: Complete Equipment for Cord Knitting Production Included Machines & Accessories: - 2 fully operational knitting machines for manufacturing round cords (up to 6 cords can be produced simultaneously) - Industrial yarn winding machine - 2 yarn stands for holding over 24 yarn cones Technical Data: Year of manufacture: 2020 Voltage: 380 V, 50 Hz Weight: 110 kg Machine Features Knitting Machines: - One machine is equipped with 4 needle heads, the other with 2 needle heads, allowing production of up to 6 cords at once. - Automatic stop function: If the yarn breaks or a needle is damaged, the affected needle head stops automatically. - Needle heads for cord production: 4 heads with 4 needles – for fine knitted cords approx. 3 mm in diameter; 2 heads with 6 needles – for cords of 5–6 mm diameter - Other configurations with 3 to 18 needles can be reordered and exchanged from the manufacturer. Industrial Yarn Winding Machine: - Winds a ball in approx. 1 minute. - Cross-winding for even yarn distribution. - Automatic stop at cord end. Operation & Control: - Speed display for needle heads and take-up device. - Each needle head can be switched on or off individually. - Adjustable speed Iiedsy Sng Nepfx Alceb Scope of Delivery & Additional Equipment: - 2 knitting machines totaling 6 needle heads - Yarn winding machine - 2 yarn stands for over 24 yarn cones - Operating instructions included - Spare needles (approx. 50 pcs) included Location & Collection: The machines are located in Munich and ready for pick-up. Instruction on operation will be provided upon collection if desired. The listed price is for the entire set (all 3 machines plus yarn stands). Individual sale possible, price negotiable. If you are interested or have further questions, please contact us!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 630 mm, lubang spindel: 320 mm, diameter pembubutan: 1.200 mm, diameter pembubutan di atas alas geser: 930 mm, panjang pembubutan: 3.000 mm, en-GB Ijdsy Sf Azopfx Alcjib

Kondisi: baik (bekas), Typ: Overture ES Spannung: 230 V (50 Hz) Hergestellt in: USA Iedpfx Alsd Ig S Aecsib Transportmaße: 600 x 400 x 500 mm Gewicht: 15 kg

Kondisi: baru, en-US Iijdpfod Nluwex Alcob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.650 kg, Meja shot blasting pneumatik. Produsen - SCHLICK Weelabrator Jerman; Iijdpfjnxkr Asx Alceb Tipe - TT 5; Tahun produksi - 2010; Aplikasi - pembersihan, penghilangan karat, penghilangan cat, persiapan pengecatan, penghilangan karat dan kerak; Satu stasiun kerja untuk sandblasting pneumatik pada meja putar; Bahan abrasif - grit baja karbon rendah pecah; Dimensi ruang kerja - 2 x 3 x 2,8 m; Diameter meja kerja yang bisa digeser - 1600 mm; Tinggi maksimal benda kerja - 1000 mm; Bobot muatan maksimal - 2000 kg; Diameter nozzle jet - 10 mm; Aplikasi opsional - shot peening; Dokumentasi teknis (DTR) - tersedia; CE - tersedia. Mesin terhubung, berfungsi, siap untuk pengujian.

Kondisi: bekas, Mesin pembersih sudut otomatis untuk PVC - Urban SV 305, tahun 2006 Mesin ini memungkinkan pembersihan otomatis pada sudut-sudut yang telah dilas, termasuk pengerjaan seal bagian dalam dan luar, bahkan pada profil yang dilapisi akrilik. Menara dudukan mata frais untuk 3 grup mata frais Pisau pembersih Grup seal bagian dalam dan luar Unit chamfer miring Sistem pengenalan profil otomatis Kontrol SPS dengan panel operator yang intuitif Start bertahap dan rem motor elektronik Iodpey Sg Ifefx Alcjib Spesifikasi teknis: Tekanan kerja: 8 bar Daya listrik: 230/400 V – 50/60 Hz Daya terpasang: 2 kW Kecepatan spindle: 2800 rpm Dimensi mesin: 2500 x 2100 x 1700 mm Berat: 550 kg Mesin berfungsi baik dan ideal untuk lini produksi PVC.

Tahun pembuatan: 1995, Kondisi: bekas, Dust extraction unit, welding fume extractor by Herding. Self-cleaning, pneumatic filter suitable for plasma cutting, laser cutting, sandblasting, soda blasting, and grinding of gypsum, cement, plastics, as well as all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high efficiency of the unit. High-quality HSL filter cartridges are made of sintered polyethylene, allowing for cleaning and offering several times longer service life compared to standard cartridges. Iiedpjpwhl Uefx Alcsb The standard filter covering is made of PTFE, which, combined with the body material (PE), provides very high chemical durability. Fan power: 4 kW Capacity: 1680 m³/h

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) Iisdpfx Alexna U Uscsb - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: baru, Sägewelle und Sägebuchsen Werkzeugwelle und Aufspannbuchsen Iijdpfx Alsnladhocsb

Tahun pembuatan: 2006, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Distiller dari FORMECO - pendingin eksternal termasuk Informasi teknis: Distilasi pelarut kontinu dan batch Kapasitas tangki: 1000 LT Termasuk pemisahan oli/pelarut Pengaduk sentral manual/otomatis Program dapat dikustomisasi Pemanasan tangki oli/pelarut kotor menggunakan minyak diatermik dan elemen pemanas listrik Distilasi vakum Kondensasi pelarut bersih melalui unit pendingin eksternal Perawatan dilakukan setiap tahun Harga: € 40.000 Iedjy Sgfkjpfx Alcsib

Kondisi: bekas, Tahun pembuatan: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE: SUCKER-MUELLER - HACOBA TYPE: NZB-Z Iedpfx Ajy Spl Holcsib WORKING WIDTH: 180 cm YEAR OF CONSTRUCTION: 2002 (USED ONLY 4 YEARS, then stored) SPEED: 500 m/min EQUIPPED WITH: - Waxing Roll - 2 Hot Air Drying Chambers (1995), 150°C - 9 Steam Drying Cylinders 180 cm (1995), 130°C - Yarn Tension Control System by ‘TENSOSCAN’ - Yarn Drying Control System by ‘PLEVA’ - Yarn Breakage Detector by ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE: ROSTONI TYPE: RCS/GB/1344 YEAR OF CONSTRUCTION: 1995 NUMBER OF BOBBINS: 1344 EQUIPPED WITH: - Movable Tensioner Frame - Eye Guide Board - Adjustable Tensioning System SIZING KITCHEN MAKE: MARIOTTI & PECINI YEAR OF CONSTRUCTION: 2002 CAPACITY: 700 Liter Stainless Steel Tub + Stainless Steel Stock Tub 700 Liters WITH ASSEMBLY BEAMER 300 CM MAKE: SUCKER-MUELLER TYPE: WN YEAR OF CONSTRUCTION: 1985 BEAMING SPEED: 150 m/min WORKING WIDTH: 300 cm BEAM DIAMETER: MAX 1000 mm BEAM WIDTH: 3000 mm (Roll Width 3200 mm) - Levelling Device System (for 8-section beams) - Tension Control System for Warp Beams - 2 x Double Deck Beam Stands for 10 beams & 6 beams by SUCKER MUELLER (1987), Type AB50

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, OMGA TR2A double mitre saw for wood and aluminium – after technical inspection, ready for operation Specification: • Technical condition – used, after a comprehensive inspection • Manufacturer – OMGA • Model – TR2A • Main motors – 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Maximum cutting length – 312 cm • Minimum cutting length – 10 cm • Maximum cutting cross-section – 80x145 mm (at a right angle) • Maximum blade diameter – 300 mm • Mitre cutting capability from -45 to +45 degrees (left, right) • 3 operating modes • Vertical workpiece clamps • Extraction ports – 80 mm diameter • Weight – approx. 500 kg • Overall dimensions – 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos presented show the actual condition of the item for sale • On-site power-up and inspection possible Iodpfx Aljy Rh Drocoib • The auction price does not include VAT or shipping costs Financing and transport: • Transport can be arranged via the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease loans