Beli Haas Hs 1 bekas (208)

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 259 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1200002, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in impeccable optical and technical condition. Factory-equipped, the VF-4 is fully prepared for 4-/5-axis operation—the comprehensive 5th-AXIS package is installed: - Axis boards for 4th and 5th axis - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw workpiece probe and tool probe Additionally, the machine comes with exceptional features: - TSC – through-spindle coolant 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic top-up, oil skimmer, mist condenser) - Fast 30+1 tool changer - Spindle with 10,000 rpm Control is the current Haas Next Generation Control with touchscreen, WiFi, Ethernet, and HaasConnect remote monitoring. This makes the machine ready for demanding machining tasks immediately. Original transport locks are included. An original Haas tool trolley for SK40 is also supplied. Available approximately from calendar week 32. Inspection and demonstration under power by appointment at any time. Loading and transport can be arranged. A matching TRT-210 CNC rotary tilting table is offered in a separate listing and can be included as a package if desired. The LANG base plates are not included in the scope of delivery. Technical data: - Travels X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Max. feed rate: 16.5 m/min - Tool changer: Side-mount SMTC, 30+1 positions - Max. tool diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized tapping - Early power failure detection module, surge protection - Features/options (all factory-installed): - 5-axis package VF-YT (4th + 5th axis prepared on drive side, DWO/TCPC, high-speed machining, programmable coolant nozzle) Kodpoy Tp E Asfx Acisdn - Wireless Renishaw probing system (intuitive) - TSC – through-spindle coolant, 21 bar - Spiral chip conveyor - Coolant maintenance package (auto fill, oil skimmer, mist condenser) - Additional coolant filter (bag filter 25 µm) - Filter set for chip tray (200 µ) - Variable coolant flow (M-code controlled) - Air blow-off inside machine door - Lifting lugs, touchscreen, door lock

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, beban meja: 227 kg, jumlah sumbu: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum workpiece travel of 787 mm, and can handle loads of up to 227 kg. With a maximum rotational speed of 50°/sec and a travel range of ±120°, it is ideal for complex machining tasks. If you are looking for high-quality milling machines, you should consider the HAAS TR-310 machine we are offering for sale. Contact us for further information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max. workpiece travel: 787 mm • Standard T-slots: 6 @ 60° • Maximum rotational speed: 50°/sec (B-axis, tilting) • Backlash: 30 arc-sec • Gear ratio: 3:1 Kdedpfx Acjx D I H Roijn • Max. speed: 50°/sec • Max. runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001° A-axis (rotary) • Accuracy: ±15 arc-sec • Repeatability: 10 arc-sec • Maximum rotation: 999,999° (with rotary control) • Resolution: 0.001°

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Kami menawarkan mesin frais portal bekas HAAS GR-510 ini, tahun pembuatan 2015. Opsi Mesin: Penukar Alat: - Penukar alat karusel 20 kantong Sumbu ke-4 & ke-5: - Penggerak dan kabel untuk sumbu ke-4 Sistem Pengukuran: - Sistem probing intuitif nirkabel Manajemen Serpihan & Pendingin: - Pelindung serpihan dan pendingin - Sistem pendingin router gantry - Nosel pendingin yang dapat diprogram Kontrol Haas: - Modul deteksi kegagalan daya awal Kdjdpfoyxx Azjx Acisn - Tapping kaku (Rigid Tapping) Opsi Produk: - Ruang sumbu Z diperpanjang 6" - Meja baja - metrik Opsi Legacy: - Penjepit penukar alat model CT - Spindel 10.000 rpm, 15 hp - Tuas jog remote dengan LCD warna

Tahun pembuatan: 2006, Kondisi: bekas, en-GB: Centre height 175 mm Centre distance 300 mm Spindle speed range 2,000 - 8,000 rpm Control SIEMENS 840D Machine weight approx. 7,500 kg Kdsdpfxjmd Dide Acisn Clamping area 1,000 x 270 mm Number of T-slots 3 Slot width 12 H7 mm Slot pitch 50 mm Spindle diameter at front bearing 55 mm Tool Grinding Machine | HAAS - MULTIGRIND AF1 Equipment: - Tool laser measurement system: Blum - Laser system MINI-MICROP-NANO The machine is in well-maintained condition. Please refer to the offer for further technical details and equipment information. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Kondisi: bekas, Tahun pembuatan: 2012, x-perjalanan 2134 mm y-perjalanan 1016 mm z-perjalanan 762 mm Kontrol CNC: HAAS CNC Ukuran meja: 2134 x 914 mm Beban maksimum meja: 1814 kg Koneksi spindle: SK 50 Kecepatan spindle: 7500 rpm Daya spindle: 22,4 kW Kecepatan feeding: 1270 mm/menit Kecepatan rapid: 15,2 m/menit Ksdpfox E Dn Nsx Acisdn Perlengkapan pergantian alat: 30 posisi Perlengkapan pendingin: IKZ Tegangan operasi: 400 V Berat mesin sekitar: 13,2 t Dimensi ruang sekitar: 4,70 x 2,95 x 2,99 m - No. pabrik: 1099476 - Tahun pembuatan: 11/2012 - Pendingin internal melalui spindle - Ekspansi 5-sumbu dengan meja putar tambahan TR310 (kondisi baru) HARGA UNTUK MESIN TANPA MEJA PUTAR TR310: 82.000,- EUR + PPN.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, jam operasional: 14.923 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 305 mm, jarak gerak sumbu Z: 534 mm, panjang pemakanan sumbu X: 762 mm, panjang umpan sumbu Y: 305 mm, panjang umpan sumbu Z: 534 mm, torsi: 45 Nm, produsen pengendali: Haas, tinggi total: 2.700 mm, panjang total: 2.200 mm, lebar total: 1.750 mm, lebar meja: 267 mm, panjang meja: 1.213 mm, kecepatan rotasi (maks.): 6.000 rpm, berat keseluruhan: 1.315 kg, kecepatan spindel (maks.): 6.000 rpm, daya motor spindle: 5.600 W, hidung spindel: CT40/ISO/BT40, jumlah spindel: 1, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Three-axis vertical CNC milling machine Haas TM1 (TM-1) equipped with a 6,000 rpm spindle. The machine is sold by Haas-certified service technicians with over 10 years of experience. This machining center has undergone a comprehensive overhaul, is fully refurbished, and ready for immediate operation. The machine is sold under a standard bill of sale, with the option to issue a VAT invoice. A twin machine will be available for sale soon – possibility to purchase both simultaneously. Optionally, the milling machine can be supplied with installation and accuracy analysis using a Renishaw Ballbar device, which performs circularity tests with an accuracy of 0.0001 mm / 0.1 μm. We provide after-sales service support if required! We assist with transport arrangements and financing solutions! Kodpoyanlaefx Acisdn The milling machine is equipped with a range of additional options: - High-speed spindle up to 6,000 rpm, - Rigid tapping, - Zero point tracking (rotation & scaling), - M19 spindle orientation, - Macro programming, - High Speed Machining (HSM), - Intuitive Programming System (visual part programming), - Fourth axis ready (option to add inverter and cabling; can be provided separately), - Air coolant (pneumatic cooling). Technical data: - Machine type – Three-axis vertical milling machine Haas TM1, - Year of manufacture – 2005, - Spindle speed – 6,000 rpm, - Travel X-axis – 762 mm, - Travel Y-axis – 305 mm, - Travel Z-axis – 534 mm, - Table dimensions – 1213 x 267 mm, - Minimum distance from spindle to table – 102 mm, - Maximum distance from spindle to table – 636 mm, - Dimensions (W x D x H) – 220 x 175 x 270 cm, - Weight – 1,315 kg, - 3 T-slots, 16 mm wide, - Spindle motor power – 5.6 kW, - Maximum torque – 45 Nm, - Spindle taper – CT40/ISO/BT40. The machine has undergone a full inspection. Ball screws, guideways, lubrication system, spindle, spindle motor, encoder, vector drive, inverters, IO board, processor board, all electrical cabinet components, axis drives, tool changer, controller, and many more have been checked. Please feel free to contact us. We also offer sourcing on demand and pre-purchase inspection of all Haas lathes and mills, including the VF, VM, DT, DM, Mini Mill, EC, UMC, ST, DS, SL, TL series, and many more.

Kondisi: bekas, Achse X 30,0 in 762 mm Achse Y 16,0 in 406 mm Achse Z 16,0 in 406 mm Zur Inspektion bereit Kdsdpfx Acjiypzdoien Bereit zur Auslieferung

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 7.320 h, nomor mesin/kendaraan: 3119208, panjang pembubutan: 406 mm, diameter pembubutan: 305 mm, daya motor spindle: 14.900 W, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 64 mm, jarak pergerakan sumbu X: 200 mm, jarak gerak sumbu Z: 406 mm, For sale: used HAAS ST15 CNC lathe in excellent technical condition. Operating hours: 7,320. Kdjdjy A I Nxjpfx Acisn Reason for sale: machine standardization to ensure compatibility with the rest of the equipment fleet. Key options: • Automatic Door • Renishaw WIPS Probing System • Hybrid BOT/BMT Turret (Dual Mount Tooling) • Live Tooling (Driven Tools – milling option) • Sub-Spindle (6,000 RPM) • Parts Catcher • Chip Conveyor • Control Cabinet Cooler • Wireless Networking (WiFi) • Rigid Tapping • Extended Program Memory (1GB) • VPS Programming (Visual Programming System) For more information, please contact us by phone or email.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 2.739 h, nomor mesin/kendaraan: 3113763, panjang pembubutan: 406 mm, diameter pembubutan: 305 mm, daya motor spindle: 14.900 W, kecepatan spindel (min.): 4.000 rpm, lubang spindel: 64 mm, jarak pergerakan sumbu X: 200 mm, jarak gerak sumbu Z: 406 mm, diameter pemasangan: 210 mm, Dijual: mesin bubut CNC HAAS ST15 bekas dalam kondisi teknis yang sangat baik. Jam kerja hanya 2739 jam. Alasan penjualan: standarisasi mesin agar kompatibel dengan seluruh lini produksi. Opsi utama: - Sistem Pengukuran Renishaw WIPS → Probe pengukuran Renishaw (WIPS) - Chuck hidraulik 8” - Turret BOT 12 posisi - Catcher bagian (part catcher) - Konveyor serbuk (chip conveyor) - Tapping rigid - Memori program diperluas (1GB) Kodpfxjy A Iw Ne Acisdn - Pemrograman VPS (Visual Programming System) - Makro kustom (masa trial masih aktif) Informasi lebih lanjut via telepon atau email.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, 1x mixing and aeration system, Mondomix, A15 – year 2013, continuous aerator/mixer, equipped with Mono Pumps eccentric screw pump, double-walled piping, aerated masses for cakes, Swiss rolls, marshmallows, chocolate, icing, and more in the bakery and confectionery industry. Kdjdpfjf Azwzsx Acion

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2001, Mikron HAAS VCE1250 Pusat Pemesinan Vertikal CNC Tahun: 2001 Perlu perbaikan karena tidak teraliri listrik sejak 2023. Mesin dalam kondisi optik yang baik namun kondisi teknisnya tidak diketahui. Mesin membutuhkan perbaikan. Spesifikasi teknis: Sumbu X: 1250 mm Sumbu Y: 500 mm Kdsdpfx Aeyq Nlvjcion Sumbu Z: 635 mm Tipe CNC: Haas Panjang meja: 1300 mm Lebar meja: 450 mm Berat benda kerja maks.: 800 kg Jumlah kantong alat: 20 Taper spindle: SK 40 Kecepatan spindle maks.: 7500 rpm Daya motor spindle: 11 kW Berat: 6100 kg Aksesori/pilihan: disiapkan untuk sumbu ke-4 (termasuk penggerak dan kabel) Pendingin melalui spindle Spiral serutan Renishaw TS27 Tangki pendingin Lemari aksesoris

Kondisi: siap digunakan (bekas), universal-grinder-haas-trossingen-001 Kdedpfx Aoyyb Txocisn

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, en Kedpfoyxw Ayox Acisdn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.394 h, Fungsionalitas: berfungsi sepenuhnya, Control: HAAS Swing Diameter: 641 mm Swing Diameter over Cross Slide: 413 mm Max. Turning Diameter: 229 mm Max. Turning Length: 356 mm X-Axis Travel: 200 mm Y-Axis Travel: +/-50 mm Z-Axis Travel: 355 mm Max. Bar Capacity: D44 mm C-Axis: 0.01° Spindle Speed: 6000 rpm Spindle Nose: A2-5 Milling Spindle Speed: 6000 rpm Rapid Traverses (X/Y/Z): 30.5 / 12.7 / 30.5 m/min Drive Power: 11 kW Turret: 12 stations Tool Holder: VDI30 Weight: 3600 kg Dimensions (LxWxH): 3048 x 2108 x 1803 mm Equipment & Accessories: - Programmable C-Axis - Y-Axis - Driven Tool Turret (all stations) - Integrated Tool Measuring Arm - Chip Conveyor - 3-Jaw Chuck D160 mm - Tailstock Kdsdpswvf Thsfx Acien The machine is in as-new condition and has barely been used.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.168 h, Fungsionalitas: berfungsi sepenuhnya, Control system: HAAS Kodjwvgbyspfx Acisdn Swing diameter: 641 mm Swing diameter over cross slide: 413 mm Max. turning diameter: 229 mm Max. turning length: 356 mm X-axis travel: 200 mm Z-axis travel: 355 mm Max. bar diameter: 44 mm Spindle speed: 6000 rpm Spindle nose: A2-5 Rapid traverse X/Z: 30.5 / 30.5 m/min Drive power: 11 kW Turret: 12 positions Weight: 3,200 kg Dimensions (LxWxH): 3048 x 2108 x 1803 mm Equipment, Features: - Integrated tool measuring arm - Chip conveyor - 3-jaw chuck Ø160 mm - Without tailstock The machine is in like-new condition and has hardly been used.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 1.626 mm, jarak lintasan sumbu Y: 1.016 mm, jarak gerak sumbu Z: 813 mm, berat keseluruhan: 13.611 kg, panjang meja: 1.626 mm, lebar meja: 914 mm, model controller: HAAS, daya nominal (semu): 22 kVA, diameter meja putar: 760 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 4.536 kg, Perlengkapan: konveyor serpihan, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-station tool changer (BT50) Full 4th axis Kdjdpfjvgmr Ijx Acisn Spindle & gearbox replaced in 2017 Single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (In case of same-day delivery of our new machine)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1159547, jarak pergerakan sumbu X: 3.683 mm, jarak lintasan sumbu Y: 2.159 mm, jarak gerak sumbu Z: 610 mm, kecepatan rotasi (maks.): 8.100 rpm, jumlah slot dalam magazin alat: 20, Processing center with extended Z-axis and magazine capacity, steel table, and additional optional equipment No minimum price - guaranteed sale to the highest bidder! Bidding obligates timely collection by 31.01.2025! TECHNICAL DETAILS X-axis travel: 3,683 mm Y-axis travel: 2,159 mm Z-axis travel: 610 mm (extended) Distance spindle nose to table (max.): 343 mm Spindle nose to table (min.): 64 mm Spindle Max. rated power: 11.2 kW Max. speed: 8,100 rpm Max. torque: 65.0 Nm at 1,500 rpm Drive system: Direct Speed, belt drive Taper: CT or BT 40 Table Length: 3,708 mm Width: 1,829 mm Thickness: 25 mm Material: Steel (extended) Max. load capacity (evenly distributed): 2,722 kg Column spacing: 2,184 mm Grid pattern: M12 threaded holes Feeds Max. cutting feed: 20.3 m/min Rapid traverse X: 20.3 m/min Rapid traverse Y: 53.3 m/min Rapid traverse Z: 27.9 m/min Axis Drives Max. thrust X: 11,210 N Max. thrust Y: 4,537 N Max. thrust Z: 9,119 N Tool Changer Type: Carousel Capacity: 20 tools (extended) Max. tool diameter (full): 89 mm Max. tool weight: 5.4 kg MACHINE DETAILS Coolant tank capacity: 360 l Kedpfx Acovpf Imsiodn Compressed air connection: 113 l/min at 6.9 bar Min. air pressure: 5.5 bar Shipping Dimensions Pallet: 575 cm x 348 cm x 295 cm Export crate: 575 cm x 348 cm x 303 cm Weight: 10,887 kg EQUIPMENT - WIPS-R_GR-712 Intuitive wireless probing system by Renishaw, incl. macros - CS-GR_GR-712 Cooling system with 360-liter coolant tank and 0.6 kV pump - HSM_GR-712 High-speed machining - C_GR-712 Portable control panel RTAP-3_GR-712 with cable guide for drilling

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Used HAAS rotary table, model HRT310, complete with drive unit and HAAS pneumatic tailstock. Kedewu Uahopfx Aciodn

Kondisi: baru, Chcielibyśmy zaoferować wały dedykowane do maszyn HAAS 2000XL, 1500 oraz TEREX TDS 820, wyposażone w boczne grzebienie i listwę rozrywającą. - 4-7-7 - 4-9-9 Firma PROTECHNIKA posiada 21-letnie doświadczenie i od początku działalności specjalizuje się w produkcji części zamiennych oraz kompletnych linii recyklingowych. W ostatnich latach rozszerzyliśmy naszą ofertę o produkcję wałów tnąco-mielących do wolnoobrotowych rozdrabniaczy. Dzięki wdrożeniu automatyzacji procesów spawalniczych oraz własnym technologiom produkcyjnym zminimalizowaliśmy czas realizacji zamówień, gwarantując jednocześnie powtarzalną, wysoką jakość. Wały tnąco-mielące są produktem seryjnym, co umożliwia nam współpracę z producentami maszyn na zasadzie dostaw OEM. Co wyróżnia firmę PROTECHNIKA na rynku? To proste! - Certyfikowane materiały 3.1 - Jakość potwierdzona przez TUV SUD Rheinland - Certyfikat ISO 9001 - Zautomatyzowany proces spawania / ISO 15613 / ISO 15614 - Uprawnienia spawalnicze ISO 9606-1 - Certyfikat ISO 9001:2015 Kdodex Hhuijpfx Acien - Certyfikat ISO 14001 - Niezależny dział konstrukcyjny, będący w stanie opracować dowolne, indywidualne rozwiązania - Własne CENTRUM BADAWCZO-ROZWOJOWE Relacje z Klientami są dla nas kluczowe, ponieważ ich zadowolenie to nasz sukces!

Kondisi: siap digunakan (bekas), Mesin Gerinda Datar Tuas Tangan - HAAS UHS FL - Panjang penggerindaan: 350 mm - Lebar penggerindaan: sekitar 180 mm - Tinggi penggerindaan: 250 mm - Gerakan penggerindaan dilakukan secara manual dengan tuas - Dapat diputar (horizontal) 360 derajat - Dapat dimiringkan (vertikal) +- 15-20 derajat - Penyesuaian sudut secara umum - Kecepatan poros: 2500 / 5600 rpm - Daya penggerak: 1,1 kW Kdsdpjyk Dq Tjfx Acijn Dimensi: P x L x T 1,2 x 1 x 1,7 meter / Berat 700 kg Kesalahan dan kekeliruan input dapat terjadi

Kondisi: baik (bekas), haas-laser-hl-1203d-20240612 Kedpfx Aoxam Ryscijdn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 2.200 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.016 mm, jarak lintasan sumbu Y: 635 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 8.000 rpm, diameter meja: 635 mm, DETAIL TEKNIS Perpindahan sumbu X: 1.016 mm Perpindahan sumbu Y: 635 mm Perpindahan sumbu Z: 635 mm Sumbu B: 120-35 ° Sumbu C: 360 ° Spindel: SK 40 Kecepatan putar: 8.100 rpm Diameter meja: 635 mm Ksdpfxjx I Ag As Aciedn Penukar alat: 30 posisi DETAIL MESIN Jumlah sumbu: 5 Jam operasi Waktu nyala: 4.300 jam Waktu siklus: 2.200 jam PERLENGKAPAN Panel kontrol dengan layar sentuh Antarmuka jaringan Sambungan WLAN Penyimpanan program bagian 1 GB Modul deteksi pemadaman listrik Panel kontrol dengan pendingin udara Sistem pengukuran nirkabel Perlengkapan pendingin Nozzle pendingin yang dapat diprogram Persiapan untuk retrofit pendingin internal Konveyor serpihan model rantai engsel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 316 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3097899, panjang pembubutan: 355 mm, diameter pembubutan: 229 mm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 200 mm, jarak gerak sumbu Z: 355 mm, No reserve price - guaranteed sale to highest bidder! TECHNICAL DETAILS Chuck size: 165 mm Maximum turning diameter: 229 mm Turning length without workpiece holder: max. 355 mm Bar capacity: 44 mm Spindle Speed: up to 6,000 rpm Motor power: max. 11.2 kW Torque: max. 102 Nm at 1,300 rpm Spindle nose: A2-5 Kdjdpfewy Rxdjx Acisn Spindle bore: 58.7 mm Swing diameters Over front cover: 641 mm Over cross slide: 413 mm Over tailstock: 597 mm Travel and feeds X-axis: 200 mm Z-axis: 355 mm X-axis rapid traverse: 30.5 m/min Z-axis rapid traverse: 30.5 m/min MACHINE DETAILS Electrical data Power supply (3-phase): 354 - 488 V Dimensions Operational height: max. 1,803 mm Operational width: max. 3,200 mm Operational depth: max. 2,108 mm Operating hours Power-on time: 7,291 h Cycle start time: 316 h EQUIPMENT 15" LCD color display with USB interface 1 MB program memory Synchronized thread cutting BOT turret with 12 tool stations

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2052582, jarak pergerakan sumbu X: 1.626 mm, jarak lintasan sumbu Y: 1.270 mm, jarak gerak sumbu Z: 813 mm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, daya nominal (semu): 22 kVA, produsen pengendali: Haas, model controller: Haas, lebar meja: 914 mm, panjang meja: 1.626 mm, beban meja: 4.536 kg, diameter meja putar: 760 mm, kecepatan rotasi (maks.): 6.000 rpm, jumlah spindel: 1, jumlah slot dalam magazin alat: 30, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Kondisi: sangat baik (bekas) Pusat pemesinan horizontal 4-sumbu Merek: Haas Perlengkapan: Holder alat SK50 Tempat alat: 30+1 Tahun pembuatan: 03/2008 Berat: 13.600 kg Tambahan: Mesin telah dicat ulang Kodew Uz Anjpfx Aciedn Harga berdasarkan permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, de Kdedpfxjyfn Ils Acijn