Beli Hbm Generator bekas (80)

Kondisi: baru, Sheet width 915 mm Hjdjupxf Iopfx Adqsnu Sheet thickness 1.0 mm Frame opening 920 mm Opening width --- mm Max. bending angle 135° Total power requirement manual operation Machine weight approx. 96 kg Space requirement approx. 1170 x 400 x 480 mm Segment bending machine Segment widths: 50, 75, 200, 2 x 300 mm.

Kondisi: baru, Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Hjdpfoupxg Esx Adqenu Machine weight approx. 70 kg Space requirement approx. 1.2 x 0.5 x 0.75 m Belt grinding machine with - Contact wheel: 600 x 75 mm

Kondisi: baru, Swing diameter over bed 320 mm Swing diameter over cross slide 220 mm Turning length 600 mm Swing diameter in gap 320 mm Spindle speed 60 - 1,650 rpm Centre height 160 mm Spindle bore 38 mm Tailstock quill taper MK 3 Connection voltage 400 V Total power requirement 1.1 kW Machine weight approx. 340 kg Space requirement approx. 1.4 x 0.75 x 0.7 m 3-jaw chuck 160 mm 4-jaw chuck 200 mm Faceplate 200 mm Fixed steady rest Travelling steady rest 4-position toolpost Hodpfx Adsupxlnsqenu Halogen machine light Chip tray, chip guard Hardened and ground bedways Longitudinal and cross feed Complete coolant system Chuck guard Set of change gears Machine tools

Kondisi: baru, Bandwidth 100 mm Belt length 1220 mm Belt speed 1140 m/min Max. package size 0.62 x 0.4 x 0.35 m Hnjdpfsupxm Eox Adqeu Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions (L x W x H) 0.97 x 0.67 x 0.37 m This machine can also be installed without the base. It is therefore suitable as a tabletop belt sander. Base is included in the scope of delivery. Connection voltage 230 V.

Kondisi: baru, Drilling capacity in steel (diameter): 25 mm Throat depth: 175 mm Quill travel: 50 mm Slot milling capacity: 16 mm Spindle taper: MT 3 Spindle speed: 50 – 3000 rpm Table travel (transverse): 380 mm Hnodpoupxtfsfx Adqju Table travel (longitudinal): 175 mm Clamping surface of table: 700 x 180 mm Power supply: 230 V Max. distance between spindle nose and worktable: max. 320 mm Total power consumption: 0.75 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drilling and milling machine with large table SINO 3-axis digital readout Quill travel digital readout 2 speed ranges Forward/reverse switch Head swivels 90° left/right Spindle guard Including toolbox with various tools

Kondisi: baru, Drilling capacity in steel (diameter): 30 mm Throat: 200 mm Drilling stroke: 70 mm Slotting cutter capacity: 16 mm Spindle taper: MT3 Spindle speeds: 50 - 3000 rpm Cross table travel: 565 mm Longitudinal table travel: 220 mm Clamping surface of table: 840 x 210 mm Connection voltage: 400 V Max. distance between worktable and spindle nose: max. 470 mm Total power requirement: 1.1 kW Machine weight: approx. 230 kg Required space: approx. 0.75 x 1.05 x 1.3 m Drilling and milling machine with large table SINO 3-axis digital display Digital quill travel display 2 speed ranges Left/right switch Hnjdoupxt Espfx Adqeu Head tilts left/right 90° Taper MT 3 - B16 Drill chuck 3 - 16 mm Spindle guard Machine base optional (199 EUR) Includes toolbox with various tools

Kondisi: baru, Engine 78.5 2-stroke Fuel type: Petrol Tank capacity: 1.6 liters Power: 2.8 HP Weight (pallet system): 40 kg Dimensions (L x W x H): 660 x 400 x 400 mm Vibratory plate compactor Hyundai engine Compaction force: 8,200 N Plate size: 490 x 320 mm Forward travel speed: 25 m/min Hnedpoupxx Usfx Adqeu Compaction depth: 12 – 16 cm

Kondisi: baru, Working width: 318 / 295 mm Planing height: 170 mm Motor power: 2.25 kW Length of surfacing table: 1300 mm Number of planer knives: 3 pcs Hnodpfx Adju Imn Neqju Feed speed: 5.3 m/min Extraction port diameter: 100 mm Connection voltage: 400 V Machine weight approx. 160 kg Dimensions (L x W x H): 1150 x 530 x 930 mm The surface and thickness planer is delivered almost fully assembled. For thickness planing, the same extraction connection as for surface planing is used. However, this is routed over the outfeed table for this operation.

Kondisi: baru, Swing diameter over bed: 320 mm Swing diameter over cross slide: 200 mm Turning length: 900 mm Swing diameter in the gap: mm Spindle speed: 75 - 2000 rpm Centre height: 160 mm Spindle bore: 50 mm Tailstock quill taper: MT 3 Connection voltage: 230 V Total power requirement: 1.5 kW Machine weight approx.: 0.29 t Required space approx.: 2.0 x 0.8 x 1.56 m Professional lathe Hnjdpfx Adjvn Uz Teqeu 3-jaw chuck 4-jaw chuck Face plate Fixed steady rest Travelling steady rest Quick-change tool post with 4 holders Halogen machine lamp Chip tray, splash guard Hardened and ground bed ways Complete coolant system Chuck guard Machine tools Live center

Kondisi: baru, Drilling capacity in steel (diameter): 35 mm Throat depth: 230 mm Drilling stroke: 125 mm Spindle taper: ISO 40 Spindle speeds: 115 – 1750 rpm Cross table travel: 560 mm Hnodou Imkdjpfx Adqsu Longitudinal table travel: 175 mm Table clamping surface: 1000 x 240 mm Max. distance between worktable and spindle nose: 375 mm Supply voltage: 400 V Total power requirement: 0.85/1.5 kW Machine weight approx.: 0.95 t Required space approx.: 1.3 x 1.2 x 2.1 m Equipment/features: - 3-axis digital readout - Digital depth display - Motorized feed for X and Y axes - Left/right rotation - Emergency stop - Swivelling drill head - Spindle guard - Machine lamp - Tool box with contents

Kondisi: baru, Saw blade diameter: 305 mm Cutting capacity (HxW): 105 x 340 mm Cutting capacity at 45°: 60 x 340 mm Saw blade speed: 5000 rpm Motor power: 2.0 kW Machine weight: approx. 25 kg Dimensions (LxWxH): 700 x 570 x 980 mm Sliding compound mitre saw The machine is equipped with numerous adjustment options and tools to support and secure the workpiece to be cut. A laser line indicates where the cut will be made. The protective cover automatically swings out of the way. Scope of delivery includes: Mounted saw blade 6 mm Allen key Dust bag 2x side supports Hodpfx Aju Immrodqenu

Kondisi: baru, Internal dimensions: 945 x 605 x 605 mm Operating pressure: 2.2 - 5.5 bar Dimensions (L x W x H): 1.0 x 0.61 x 1.65 m Maximum packing size: 1300 x 1000 x 750 cm Hnjdpfx Adsupw Smjqou Air consumption: 250 l/min Machine weight: approx. 0.09 t This jet cabin comes as standard with: - Blast gun - 4-piece nozzle set - Glove set - Lighting - Set of protective films - Foot pedal - Pressure regulator - Extraction unit with microfilter.

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 300 mm Drilling stroke: 120 mm Spindle taper: MT 4 Table: 500 x 460 mm Column diameter: 115 mm Speed range: 75–3,200 rpm Feeds: 0.1 / 0.18 / 0.26 mm/rev Total power requirement: 1.5 kW Machine weight: approx. 350 kg Dimensions (L x W x H): 2.2 x 0.8 x 0.7 m Column drilling machine equipped with: - Automatic feed - Tapping function - Digital depth display - Coolant system - 2-stage motor - Spindle guard - Swiveling table - Swiveling drill head - LED lighting Packing dimensions: 730 x 760 x 1,880 mm Hjdpfx Aeupxi Hsdqsnu Weight: 340 kg

Kondisi: baru, Delivery pressure 8 bar effective delivery rate 120/85 L/min tank capacity 30 liters machine weight approx. 50 kg number of cylinders 2 motor 230V / 0.75 kW Dimensions (LxWxH): 570 x 640 x 800 mm Low-noise, professional 30-liter compressor Noise level approx. 40–45 dB(A) This compressor is supplied as standard with: Hnodjupxmlspfx Adqju safety valve, pressure reducing valve, pressure gauge, coupling, and bottom drain valve.

Kondisi: baru, en-GB Cutting diameter: 355 mm Saw band dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20–80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Connected load: 400 V Total power requirement: 2.2 kW Machine weight approx.: 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Semi-automatic mitre band saw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release mechanism Hsdpfx Asmhm Aqodqenu - Band tension control via manometer - Electric automatic coolant system

Kondisi: baru, Swing diameter over bed: 320 mm Swing diameter over cross slide: 200 mm Turning length: 900 mm Swing diameter in the gap: mm Spindle speed: 75 - 2000 rpm Centre height: 160 mm Spindle bore: 50 mm Tailstock quill taper: MT 3 Connection voltage: 230 V Total power requirement: 1.5 kW Machine weight approx.: 0.29 t Required space approx.: 2.0 x 0.8 x 1.56 m Professional lathe 3-jaw chuck 4-jaw chuck Face plate Fixed steady rest Travelling steady rest Quick-change tool post with 4 holders Halogen machine lamp Chip tray, splash guard Hardened and ground bed ways Complete coolant system Chuck guard Hsdpfx Adonq Sayjqsnu Machine tools Live center

Kondisi: baru, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15/30 m/sec Tube diameter: 20 – 76 mm Angle adjustable from – to: 30–90 degrees Connection voltage: 400 V Total power requirement: 2.5 / 3.3 kW Hodpfx Aoupw Riedqjnu Machine weight: approx. 0.19 t Required space: approx. 1.2 x 0.75 x 0.7 m Belt grinding machine with: - Abrasive belt grit K 40 - incl. 7 grinding rollers: 20, 28, 32, 41, 48, 60, and 76 mm

Kondisi: baru, Drilling capacity in steel (diameter): 32 mm Throat depth: 200 mm Drilling stroke: 120 mm Spindle taper: MT 4 Hnjdpfsupw Saox Adqou Table size: 290 x 270 mm Column diameter: 92 mm Speed range: 150 - 2450 rpm Feed: 0 mm/rev Total power requirement: 1.1 kW Machine weight: approx. 95 kg Dimensions (L x W x H): 0.66 x 0.8 x 1.7 m Column drilling machine equipped with: - ARBO / CE-certified safety cover - Keyless drill chuck with pin - Tilting work table - Depth stop - Ejector wedge.

Kondisi: baru, Material width: 1015 mm Material thickness: 1 mm Manual feed speed Hsdpfx Adoupxdkeqjnu Weight: 240 kg Dimensions (L x W x H): 1420 x 600 x 750 mm Combined sheet metal working machine with: - Bending, tool widths: 25 - 50 - 75 - 150 - 200 - 250 - 300 mm - Rolling, roll diameter: 42 mm - Shearing, max. 1015 x 1 mm

Kondisi: baru, Internal dimensions: 1170 x 880 x 825 mm Operating pressure: 2.5 - 8.0 bar Dimensions (L x W x H): 1.33 x 1.24 x 1.77 m Air consumption at 6 bar: 350 l/min Machine weight: approx. 0.16 t Cabin is included as standard: Front loader with two gas pressure springs Blasting gun 4-piece nozzle set Set of gloves Hnedpfx Ajupxdwsdqou Lighting Set of protective foils Foot pedal Pressure regulator Extraction system with micro filter.

Kondisi: baru, Internal dimensions: 1170 x 580 x 580 mm Operating pressure: 2.2 - 8.0 bar Dimensions (L x W x H): 1.22 x 0.93 x 1.70 m Air consumption at 6 bar: 350 l/min Machine weight: approx. 0.15 t This jet cabin comes as standard equipment. Front loader with two gas struts Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Hsdeupxd Djpfx Adqenu Foot pedal Pressure regulator Extraction unit with micro filter

Kondisi: baru, Diameter 200 mm Height 105/265 mm Centre height 105 mm Hnodpfxeupxd Ro Adqju Machine weight approx. 41 kg Required space approx. 400 x 330 x 310 mm

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 350 mm Drilling stroke: 180 mm Spindle taper: MT 4 Hnsdpfxoupxhie Adqsu Table: 560 x 560 mm Column diameter: 140 mm Spindle speed: 50 - 1450 rpm Feeds: 0.1 - 0.2 mm/rev Total power requirement: 1.5 kW Machine weight approx. 580 kg Dimensions (L x W x H): 2,270 x 700 x 1,100 mm Column drilling machine equipped with: - Automatic feed - Tapping function - Digital depth indicator - Coolant system - 2-speed motor - Spindle guard - Swiveling table - LED lighting

Kondisi: baru, Drilling capacity in steel (diameter): 32 mm Throat depth: 200 mm Drilling stroke: 70 mm Slot drill capacity: 16 mm Spindle taper: MT3 Spindle speeds: 50 - 3000 rpm Table travel, transverse: 220 mm Table travel, longitudinal: 425 mm Table clamping surface: 700 x 210 mm Connection voltage: V Max. distance between worktable and spindle nose: 470 mm Total power requirement: 1.5 kW Hsdpjupxlbsfx Adqjnu Machine weight approx.: 230 kg Space requirement approx.: 0.75 x 1.05 x 1.2 m Drilling and milling machine with: Powerful 2-speed motor Luxury control panel Taper MT 3 - B16 Drill chuck 3 - 16 mm Forward/reverse switch Spindle guard Fine adjustment Drift key Drawbar for tool clamping Associated tools.

Kondisi: baru, Compression force: 60 kN Oil capacity: 60 ml Operating temperature: 5 - 40°C Weight: 7 kg Dimensions (L x W x H): 430 x 350 x 100 mm Hydraulic crimping tool set 10 interchangeable dies for 16, 25, 35, 50, 70, 95, 120, 150, 185, and 240 mm² Hnedpfxeu Imkks Adqsu 2 rechargeable batteries, 4.0 Ah (Makita-compatible) 1 charger Supplied in storage case