Beli Homag Kl 79 bekas (489)

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, de-001 Kedpfx Agoycg D Te Rslp

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0/200/06/3164, berat keseluruhan: 6.500 kg, panjang total: 12.600 mm, berat benda kerja (maks.): 5.500 kg, Mesin edge banding softforming, dalam kondisi operasi, kondisi bekas, tahun pembuatan 2003. Kjdpfx Ajvx Ep Nsg Rjlp

Kondisi: baik (bekas), Tahun pembuatan: 2005, Gluing unit motorized height adjustment Homatic NC 21 control system frequency converter Hot-melt gluing unit A20 for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat screen Feed rate 18.5 m/min ? Feed speed steplessly adjustable 8-24 m/min or 12-24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece overhang 30 mm Workpiece thickness 12-60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Joint milling unit Workpiece pre-heating Gluing section A 20 / hot-melt gluing unit A 34 Magazine for solid wood edges, strip material and roll material Roll separation device Pressure zone End trimming unit KL Klodpoyvy D Iefx Ag Rep Release agent spray device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, exchangeable (for color change) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Multi-purpose finishing unit (automatic) complete Finishing unit The pictured return conveyor is not included in the scope of delivery The data were taken from a data sheet, therefore no guarantee. Exact configuration on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 0-200-24-6287, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 56 A, ketebalan tepi (maks.): 20 mm, Perlengkapan: Penandaan CE, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and finishing of various edge materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed device, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off during feed stop - Glue roller clamping before workpiece trailing edge Kodeyv Da Hspfx Ag Rolp - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit, synchronous/counter-rotation, 2 x 4kW, process-controlled GLUING UNIT A20, consisting of: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine for edge thickness min. 0.4 mm up to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 6 idler pressure rollers POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable end stops - Pre-/flush trimming unit, 1.5 kW, top/bottom - FK13 profile trimming unit (corner rounding), 2 motors (top/bottom) with automatic 8-position tool changer, multiple replacement heads, iSystem - MN21 profile scraper, top/bottom, with axis positioning - FA10 flat scraper, top/bottom (version with 3 tracing rollers) - KS10 belt sanding unit for straight edges with oscillation - Buffing unit, top/bottom CONTROL: HOMATIC NC 21

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jam operasional: 33.000 h, tinggi benda kerja (maks.): 60 mm, kecepatan pemakanan sumbu X: 25 m/menit, model controller: Power Control PC22, tinggi kerja: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness 22 mm: 55 mm Minimum working width at workpiece thickness 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edge material strips max.: 0.4 - 20 mm Edge cross-section strips max.: 900 mm² Edge material coil: 0.3 - 3 mm Edge cross-section max. for PVC: 135 mm² Edge cross-section max. for veneer: 100 mm² Maximum coil diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with extendable roller rail, approx. 800 mm Glue roller drive at feed stop Glue pot lift-off at feed stop Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed stop 2-roller infeed device Infeed extension 500 mm Kodpfx Agjyc Sr Ae Rslp Automatic adjustment of pressure zone Sliding carriage Boomerang ZHR05 return system pre-installed Workpiece support in extended scissor type Operating data acquisition Electric height adjustment Fixed stop side left Workpiece transport device Top pressure unit Release agent spraying unit Jointing milling unit, 2 x 3 kW A20 Basic gluing unit for coil material up to 3 mm and strip material up to 20 mm, with melting unit, granulate hopper, and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contour milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi trim unit MN21 automatic Finishing unit FA11, with trimming unit, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Provision for additional processing units Note: The machine is sold without working tools. Container loading and seaworthy packaging by the seller is not possible.

Kondisi: bekas, Multiplexer, control board, input board, control unit, edge banding machine, edgebander -Manufacturer: Homag Homatic -Type: 2-083-02-7921 -Type: 2083027921 Kljdecc Enxspfx Ag Rsp -Quantity: 2x control boards available -Price: per piece -Dimensions: 130/340/H30 mm -Weight: 0.28 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, de-hu-20240630-01 Kljdpfsx Aqdcjx Ag Rop

Kondisi: sangat baik (bekas), Control unit Power Control + CadMatic 4 Professional software Roller conveyors for lifting table feed (qty) 1 x 18,000 mm + (OPTIONAL: transverse chain sections in 10-ton lifting table, 5,600 mm) Lifting table (mm) 5,600 x 2,200 VAC insertion trolley for gentle loading of sensitive single panels via vacuum 1st infeed saw with clamping tongs (qty) 6 Klodpfxef Nkv Sj Ag Rjp Rotation device (for panels) 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 2nd infeed saw with clamping tongs (qty) 7 (+1) 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 Oscillating chute, chip removal conveyor, with cross-cutting unit (19.5 kW) No. 2 front air cushion tables (+1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables type 68/20 and type 58/24 + No. 3 belt conveyors: 2 x type 255/56/2 and 1 x type 27/56) Total connected load approx. 110 kW

Kondisi: sangat baik (bekas), en-1 Klsdovnq H Ejpfx Ag Rop

Kondisi: sangat baik (bekas), PLATE PANEL SAWING CENTER – ANGLE SYSTEM Kledjpuh Dkspfx Ag Rop Control: CadMatic 4 Professional Powered Roller Conveyor No. 1 (mm) 2200 x 4400 Lifting Table (mm) 2200 x 4300 First Pusher Saw with Clamping Jaws (No.) 4 First Panel Saw Max. Cutting Width (mm) 4300 Max. Saw Blade Projection (mm) 125 Scoring Saw (Max. Blade Diameter / Power) mm 180 (kW 2.2) Main Saw (Max. Blade Diameter / Power) mm 450 (kW 18) Adjustable Saw Carriage Feed Rate (m/min) 1 – 150 Second Pusher Saw with Clamping Jaws (No.) 8 Second Panel Saw Max. Cutting Width (mm) 2200 Max. Saw Blade Projection (mm) 125 Scoring Saw (Max. Blade Diameter / Power) mm 180 (kW 2.2) Main Saw (Max. Blade Diameter / Power) mm 450 (kW 18) Adjustable Saw Carriage Feed Rate (m/min) 1 – 150 Front Air Cushion Tables No. 2 (+1 additional or more) Total Connected Load (kW) 52.6

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2-017-95-2630, Spindle motor untuk mesin CNC Weeke BOF dan BAZ. - Tersedia 7 pcs (dari jumlah tersebut 2 pcs dengan sumbu C); - 12000 - 24000 Rpm; Kodsxnbmfspfx Ag Rslp - 16kW - HSK 63

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Kljdpfsyqybuox Ag Rjp Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 5321

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, lebar kerja: 1.935 mm, jumlah spindel: 40, tinggi pelat: 350 mm, panjang kerja: 6.200 mm, jumlah sumbu: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum cups for securing workpieces Safety mats at the front Vacuum pump Waste chip conveyor Fixed grooving unit for creating grooves in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. Kodpfx Agoyqx U Hs Rjlp External reference: 8105

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Kjdpfeyttf Sox Ag Rjlp Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety enclosure Note: Cones, cutters, and attachments are not included in the scope of delivery. Safety fences will be supplied as available (left side only). The machine is sold and delivered 'as is, where is', based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of suction beam traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT Klsdpfx Agsyttcwo Rjp NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cone and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush Kodpfx Ajytr Hbjg Relp No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, daya: 20 kW (27,19 hp), tegangan masuk: 415 V, arus masuk: 50 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, tinggi benda kerja (maks.): 80 mm, Perlengkapan: dokumentasi / manual, Wir bieten dieses gebrauchte WEEKE OPTIMAT BHX 500 Durchlauf-Bearbeitungszentrum, Baujahr 2007, zum Verkauf an. Das Homag Weeke Optimat BHX 500 ist ein kompaktes CNC-Horizontalbohrzentrum, das für die hochpräzise Bearbeitung von Möbelplatten, Korpus- und Bauteilen im Möbel- und Innenausbau konzipiert ist. Das horizontale Bearbeitungskonzept ermöglicht eine effiziente Bearbeitung bei geringem Platzbedarf sowie eine hohe Produktionsgeschwindigkeit und Präzision. _____ Hauptmerkmale • Horizontales CNC-Bohrzentrum für effiziente Plattenbearbeitung • Große Bearbeitungskapazität • Hohe Achsgeschwindigkeiten für schnelle Bearbeitungszyklen • Integriertes Spannsystem für präzise Werkstückpositionierung • Ausgelegt zum Bohren, Fräsen und Nuten • Gefertigt von HOMAG / Weeke, einem führenden Hersteller von CNC-Holzbearbeitungsmaschinen _____ Achsgeschwindigkeiten • X-Achse: bis zu 138 m/min • Y-Achse: bis zu 80 m/min • Z-Achse: bis zu 50 m/min • Pressplattenachse: 27 m/min _____ Werkstückabmessungen • Länge: min. 300 mm, max. 2500 mm • Breite: min. 100 mm, max. 1000 mm • Dicke: min. 4 mm, max. 80 mm _____ Maschinenabmessungen • Länge: ca. 6500 mm • Breite: ca. 2300 mm • Höhe: ca. 2700 mm _____ Elektrischer Anschluss • Betriebsspannung: 3 × 415 V ±5 % • Frequenz: 50 Hz • Gesamtanschlusswert: ca. 19,5 kW • Empfohlene Absicherung: 50 A _____ Kljdpfxoyr Utne Ag Rsp Pneumatik • Mindestdruck: 7 bar • Luftverbrauch: ca. 2500 NL/min _____ Absaugung • Absaugstutzen: 2 × 280 mm • Erforderliche Luftmenge: mind. 4450 m³/h • Unterdruck: ca. 3000 Pa _____ Für weitere Fragen oder Informationen stehen wir Ihnen jederzeit gerne telefonisch oder per Nachricht zur Verfügung.

Kondisi: bekas, nomor mesin/kendaraan: 008395, arbeitsbereich_achse_x_3050_mm_arbeitsbereich_achse_y_1250_mm_le istung_hauptspindel_10_kw_anz_kontrollierte_achsen_3_achsen_anzah l_bohrspindeln_27_anzahl_werkzeugplatze_8 Kjdpfx Agjygtcqs Rjlp

Kondisi: bekas, nomor mesin/kendaraan: 008323, Tipe tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Penghalusan sambungan: ya Agregat multifungsi: ya Kedpfxjx Hpkxs Ag Relp Kecepatan maju maksimum: 20 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 7 unit

Kondisi: bekas, nomor mesin/kendaraan: 005980, Gergaji format: Mesin 1 & 2 Tinggi maksimum panel: 120 mm Kedpfexcf S Iox Ag Rjlp Kecepatan maju maksimum: 20 m/menit Jarak antar pengait: 1000 mm

Kondisi: bekas, nomor mesin/kendaraan: 008324, trans_001 Kodpox Hpkrsfx Ag Rolp

Kondisi: bekas, nomor mesin/kendaraan: 006064, Gergaji format: Mesin 1 & 2 Kjdolw A D Tspfx Ag Rolp Tinggi panel maksimum: 85 mm Kecepatan pengumpanan maksimum: 26 m/menit Jarak antar kait: 1000 mm

Kondisi: bekas, nomor mesin/kendaraan: 008325, 1: Einseitige Kantenanleimmaschine HOMAG-KDF 860 C Kodpfx Aox Hpklsg Rjlp 2: Plattenrückführung HOMAG-KDF 860 C

Kondisi: bekas, nomor mesin/kendaraan: 008412, de20240614-01 Klodpfx Aoyilxmog Rop

Kondisi: bekas, nomor mesin/kendaraan: 008402, de-1 Klodeygtbmopfx Ag Rop