Beli Horisontal Pengeboran Kepala bekas (7.560)

Kondisi: baru, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirement: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the sawing stroke Hedpsfu Nbbefx Aabjff Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Minimum rest piece length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Hedpsfgyifefx Aabsff Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" Hfjdpfxefgyigj Aabef which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is Hfjdpfefg E Hmex Aabjf built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250x600 mm Hfodefg E Hnepfx Aabsf Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870x600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550x450 mm Bandsaw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double-mitre bandsaw for fast cutting with pusher system P15. Option P30. Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, with large radial central positioning. The worktable is mounted with high-quality preloaded bearings, ensuring very smooth rotation. CNC control CNC control allows programming of up to 90 cutting programs with different cut lengths, batch sizes, and mitre angles. Double-sided clamping positioning system The B&S pusher, feed and positioning system, is equipped with "double-sided opening grippers" operated hydraulically. This ensures secure gripping and transport of materials and bundles that may differ from the ideal shape. The pusher system is separate and runs on ball-bearing linear guides, precision-ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirement: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting • CNC control for workflow optimization Enables input of various parameters such as quantities and material lengths, automatic calculation of the cutting kerf • CNC controller for 10 different sawing programs with 99 sub-programs for Hfjdsd Iipropfx Aabjf different lengths and quantities, e.g. one sawing program with a variety of section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum remaining piece 170 mm.

Kondisi: baru, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 870 mm Blade speed 18 - 110 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic, GBS 250 Super VA-I MPS • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation (Cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (Automatic cut start detection) • Frame and gearbox cast in one piece, Hfodsd Iip Ajpfx Aabjf very quiet operation and very low vibration • Removable chip tray (for cleaning/disinfection) • Top access to saw, material, and feed unit • Foldable safety cover • Fine adjustment of feed • Semi-automatic cut! Automatic sawing with microprocessor control Configurable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired quantity and length: material positioning, cut execution and piece counting until the program is complete • MPS control for entering the required feed quantity • The LED display shows all essential machine data during cutting operation (current consumption, cutting time, quantity) • Entered data are stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as an error message and monitors the complete process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier scale with mechanical position indicator Adjustable for cut lengths from 2.5 mm to 420 mm, or via reversing automation repeatable 1 – 29 times, remnant length 210 mm

Kondisi: hampir baru (bekas), Mesin pemotong kepala ini terdiri dari pengumpan otomatis yang mengarahkan ikan dengan posisi kepala terlebih dahulu melalui hopper bergetar. Ikan terus bergerak secara stabil melalui empat bagian pengumpanan menuju bagian pemotongan kepala. Alat pemotong kepala memotong kepala dan secara bersamaan menghilangkan tulang belakang dari tubuh ikan pelagis. Jenis ikan yang dapat diproses meliputi ikan teri, sarden, dan spesies serupa. Pengolahan pelagis: - Sistem pengolahan pelagis berkecepatan tinggi, dari penerimaan hingga pengemasan dan paletisasi. - Mengoptimalkan kinerja, produktivitas, dan kualitas produk. - Alur produksi, kapasitas pembekuan, dan pemantauan perangkat lunak yang superior. - Ukuran maksimum ikan: 200 mm (panjang) x 30 mm (lebar). Kapasitas produksi dapat bervariasi berdasarkan jenis dan ukuran ikan. Hsdpfxjyuffye Aabjff

Kondisi: bekas, jarak tempuh: 919.667 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 01/2019, jenis bahan bakar: diesel, berat keseluruhan: 19.500 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 06/2026, rem: retarder, warna: merah, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, PRESSTA CYKLON D mesin obeng otomatis dua kepala dijual lengkap dengan semua aksesorinya. Penawaran paket: jika Anda juga membeli lini pengelasan WM740 dan pusat pemesinan SMC350 yang ada di daftar kami, harga total adalah 180.000 EUR. Hfsdpeyziu Tjfx Aabsf

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual mesin las otomatis empat kepala SCHTEC WM740, jarang digunakan dan kondisinya hampir seperti baru, lengkap dengan pembersih sudut otomatis WM620, stasiun pendingin, dan lengan pemutar otomatis. Jika dibeli satu paket dengan pusat pemesinan SMC350 dan obeng otomatis dua kepala Pressta yang tercantum di iklan kami, harga paket adalah 180.000 EUR. Hedoyzimcjpfx Aabjff Untuk informasi lebih lanjut, silakan hubungi kami.

Kondisi: bekas, warna: lain, 0 Hfsdpfx Aaoy Acmfsbof

Kondisi: bekas, jarak tempuh: 727.047 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 05/2015, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, ukuran ban: 385/65/22.5, konfigurasi gandar: 4x2, rem: retarder, warna: abu-abu, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, jumlah tempat tidur: 2, ukuran ban depan: 385/65/22.5, ukuran ban belakang: 315/70/22.5, jumlah tempat duduk: 2, Perlengkapan: ABS, filter jelaga, kabin, kebisingan rendah, kendali jelajah, komputer bawaan, kontrol traksi, kunci diferensial, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 485.000 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 03/2021, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 03/2027, rem: retarder, warna: hitam, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: pemanas parkir, pendingin udara, sistem navigasi,

Kondisi: bekas, jarak tempuh: 710.000 km, daya: 340 kW (462,27 hp), pendaftaran pertama: 03/2017, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 04/2027, rem: retarder, warna: hitam, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2017, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 182.100 km, daya: 387 kW (526,17 hp), pendaftaran pertama: 05/2024, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 03/2027, warna: putih, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 714.900 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 03/2018, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Tahun pembuatan: 1981, Kondisi: sangat baik (bekas), 2 units drilling beams, 21 spindles each, 32 mm pitch system Maximum travel of drilling beam: min. 22 mm to max. 624 mm Row spacing: min. 125 mm, max. 603 mm (drilling line) 1 pneumatic clamping cylinder positioned between the drilling beams Motor: 4.4 kW Drilling stroke: 98 mm Hfsded Attpjpfx Aabjf Oil-damped cylinder with 70 mm stroke Operating pressure: approx. 6.0 bar Air consumption: approx. 3 l/cycle Travel range: min. 20 mm to max. 650 mm Machine No.: 705521 Weight: approx. 540 kg Dimensions: 2500 x 1100 x 1700 mm The machine is currently being serviced and function-tested Condition: very good

Tahun pembuatan: 1980, Kondisi: sangat baik (bekas), 1 unit drilling beam, 21 drills, 32 mm grid system Maximum travel path of the drilling beam: min. 22 mm to max. 624 mm Row spacing: min. 125 mm, max. 603 mm (drilling line) Motor: 4.4 kW Drilling stroke: 98 mm Oil damper cylinder with 70 mm stroke Operating pressure: approx. 6.0 bar Hjdpfx Aasfhn Irsboff Air consumption: approx. 3 l/cycle Travel path from min. 20 mm to max. 650 mm Weight: approx. 540 kg Dimensions: 2500 x 1100 x 1700 mm The machine is currently being serviced and functionally tested Condition: very good

Kondisi: bekas, jarak tempuh: 496.072 km, daya: 331 kW (450,03 hp), pendaftaran pertama: 03/2022, jenis bahan bakar: diesel, berat kosong: 7.500 kg, berat muatan maksimum: 10.500 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.750 mm, warna: biru, kabin pengemudi: lain, tipe perpindahan gigi: otomatis, suspensi: udara, Tahun pembuatan: 2022, jumlah tempat duduk: 2, Perlengkapan: ABS, kebisingan rendah, kendali jelajah, komputer bawaan, kontrol traksi, kunci diferensial, pemanas parkir, pendingin udara, sistem navigasi,

Tahun pembuatan: 1991, Kondisi: hampir baru (bekas), de-Maschine ist voll funktionsfähig. Derzeit auf Lager. 6.000 mm. Hsdjhvrz Tspfx Aabjff

Tahun pembuatan: 2000, Kondisi: baik (bekas), berat muatan maksimum: 5.400 kg, Diameter batang (maks.): 40 mm, ketebalan dinding: 50 mm, nomor mesin/kendaraan: 26130,

Kondisi: bekas, jarak tempuh: 695.000 km, daya: 340 kW (462,27 hp), pendaftaran pertama: 01/2017, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 04/2027, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2017, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 732.000 km, daya: 340 kW (462,27 hp), pendaftaran pertama: 05/2017, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 04/2027, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2017, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 754.353 km, daya: 331 kW (450,03 hp), pendaftaran pertama: 09/2015, jenis bahan bakar: diesel, berat kosong: 7.737 kg, berat muatan maksimum: 11.263 kg, berat keseluruhan: 18.000 kg, ukuran ban: 315/60 R22,5, konfigurasi gandar: 4x2, jarak roda: 3.550 mm, inspeksi berikutnya (TÜV): 10/2026, konsumsi bahan bakar (perkotaan): 580 l/100 km, warna: hitam, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, panjang total: 5.805 mm, Tahun pembuatan: 2015, jumlah tempat duduk: 2, tinggi angkat: 3.500 mm, Perlengkapan: ABS, kendali jelajah, kunci diferensial, pemanas parkir, pendingin udara,