Beli Ism 4 bekas (58.935)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. Fedpfx Aaod Tqaljgepd When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Fpjdpfx Aaefdkb Usged Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) Fpedpfx Ajguk Dkeaged * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing Fjdpfx Aajfdkbhjgspd - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Fodpfx Aoguk Dvjagjpd - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2016, Used Machine Cross Sanding Automatic Machine Year of Manufacture: 2016 Product Advantages Beneath every perfectly lacquered, stained, or oiled wooden surface lies a flawlessly sanded substrate! Felder sanding machines stand out for their robust construction, cutting-edge machine technology, and maximum productivity. Key Highlights at a Glance: • Sanding width: 1350 mm • Sanding height: 3–170 mm • Combined superfinish unit • Touch-screen control for operation • The Felder operating concept ensures maximum process and work safety Your Advantages at a Glance: Time Savings • Motorized adjustment of the contact roller in increments of 0.01 mm from the control panel • Innovative unit arrangement for pre-sanding and fine sanding of veneered workpieces • Brushing units at machine outfeed • Lacquer sanding as optional upgrade Convenience • Fixed infeed table height (machine upper section adjusts) • Touch screen control with clear visual indicators and program memory • Machine data acquisition for abrasive belt wear and much more • Tool-free sanding belt replacement • Large fold-down table extensions for the heaviest workpieces Flexibility • Units for calibration, fine sanding, and lacquer sanding • Variable feed speed up to 20 m/min via inverter Innovation • Electronically segmented sanding pad with silicone technology for minimal air consumption • Combined superfinish unit incl. chevron glide belt to compensate for oscillation marks Quality • Heavy-duty machine construction • Durable machine components Standard Equipment Control System: finish 1350 classic Control unit with 7" touch color display, 100 program memory slots, maintenance intervals Direct text error messages Ammeter for load monitoring Feed Table Fixed infeed height—stationary table, 900 mm; electric height adjustment of units incl. fine adjustment via control panel; infinitely variable feed speed from 2.8–20 m/min. Adjustable by inverter from the control panel; hand protection and workpiece overthickness protection; workpiece detection sensor with 25 sensors; 55 mm segment width Endless belt conveyor with honeycomb structure Automatic feed belt centering Cross Sanding Unit: finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron glide belt between sanding pads—sanding belt for homogeneous finishes without oscillation marks Variable pressure regulation on operator side Sanding belt oscillation: electro-pneumatic Electronic sanding belt tracking safety Fpsdpfow I Uv Ujx Aagsd 1 motor with 7.5 kW (10 HP) Star-delta start Cleaning blower with timer control Cutting speed: 12 m/s Sanding belt: 140 x 4560 mm Combined Superfinish Unit 1350C: Rubberized, grooved contact roller with 85–90° Shore hardness and 142 mm diameter Electromotive position-controlled grit compensation Segmented, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure regulation on operator side Chevron glide belt between sanding pads and sanding belt for homogeneous finishes without oscillation marks Mechanically pre-tensioned rubber pressure rollers Sanding belt oscillation: electro-pneumatic Electronic sanding belt tracking safety

Kondisi: bekas, Diameter various Quantity 40x Fpedpfsww Nbljx Aagjd Holder BT 40

Kondisi: bekas, Tahun pembuatan: 2019, Used Capsuling Machine Nortan Prisma 2019 La Nortan Prisma 40 capsulatrice del 2019 è una macchina all’avanguardia, progettata per garantire elevate prestazioni e massima affidabilità. Con una tensione di 400 Volt e un assorbimento di 2 kW, frequenza di 50 Hertz e massa di 1400 kg, questa capsulatrice è ideale per operare con una pressione dell’aria di 6 bar. La macchina opera in senso antiorario e ha una velocità massima di 2000 pezzi/ora su entrambe le tipologie di capsule: termoretraibili e polilaminato snervato. Il pannello operatore, posizionato nella parte superiore sinistra, è analogico e include un piccolo PLC. Fpodpfxevgvyhj Aaged La chiave di comando e l’avvio/arresto sono manuali. Questa Nortan Prisma 40 capsulatrice è praticamente pari al nuovo ed è immediatamente disponibile a magazzino, previa una breve pre-manutenzione per verificare che tutto sia perfetto. Se cerchi una capsulatrice affidabile e performante, questa Nortan Prisma 40 del 2019 è la scelta giusta per te.

Kondisi: bekas, Tahun pembuatan: 2013, Gebrauchte Kapselmaschine Nortan Prisma 4T 6000 Fl/h Diese gebrauchte Kapselmaschine wurde 2013 komplett wie neu überholt und ist für Schrumpfkapseln ausgelegt. Schutzeinrichtungen sind für diese gebrauchte rotierende Kapselmaschine vorhanden. Es stehen drei verschiedene Flaschenausrüstungen zur Verfügung. Die Maschine wurde vor der Demontage überprüft, befindet sich in gutem Betriebszustand und war bis September 2021 in Produktion. Sie verfügt über ein automatisches Magazin für Schrumpfkapseln. Eine Lichtschranke verbindet die Komponenten mit der Hauptstruktur und gibt die Kapseln vollständig automatisch und synchronisiert an die einlaufenden Flaschen ab. Trotz der einfachen Bauweise ist eine regelmäßige Wartung dieser Kapselmaschine unerlässlich. Insbesondere sollten die Thermoköpfe und deren Dichtungen sorgfältig kontrolliert werden. Der Schaltschrank ist vollständig, inklusive aller Kabel, SPS, Handbücher und Schaltpläne. Der Platzbedarf für diese gebrauchte Kapselmaschine beträgt ca. 4,5 m². Fedpjvguvzefx Aagspd Die maximale Leistung beträgt 6.000 Flaschen pro Stunde. Die gebrauchte rotierende Kapselmaschine wird mit einem kompletten Satz Sterne, Schnecken und Gegensterne zur korrekten Flaschenführung geliefert. Die Zuführung erfolgt von links nach rechts, somit im Uhrzeigersinn. Die Maschine ist speziell für Glasflaschen ausgelegt und kann Flaschengrößen von 0,5 l, 0,75 l bis 1 l verarbeiten. Nortan ist eine der am häufigsten verbreiteten Marken, daher ist die Ersatzteilversorgung für diese Maschine problemlos gewährleistet.

Kondisi: hampir baru (bekas), Treif broodsnijmachine 4-24MM In goede werkende staat. Voor meer informatie graag een aanvraag sturen. Fpjdpfoumpg Rjx Aaged

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), Four-sided planer/moulder HARBS, 8 heads. Long infeed table, 3 meters. Machine weight: 5,500 kg. Cardan shaft drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Fsdpfxsl Dw Nxo Aagepd

Tahun pembuatan: 1980, Kondisi: bekas, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzów Wielkopolski Delivery conditions Collection by customer Delivery costs Fpedpocw Dg Dofx Aaged To be borne by the buyer Startup type To be agreed Description Notes Automatic carbide-tipped circular saw grinder, hydraulic

Kondisi: sangat baik (bekas), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was installed on a VTC 300; now for sale due to upgrade to a new 5-axis machine. Fsdpfx Aajp U Umkogopd

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EAN0729389556525, panjang total: 34.000 mm, tinggi rak: 3.500 mm, panjang penyangga: 2.700 mm, panjang rak: 8.500 mm, tinggi rangka: 3.500 mm, beban per pasangan rangka atap (maks.): 3.000 kg, lebar rangka: 1.100 mm, jumlah baris rak: 4, ruang palet: 108 palet Euro, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep, Each with 3 bays, 2.7 m wide, Each with 2 beam levels, shelf load capacity 3000 kg. Scope of supply: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, assembly materials - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Fjdpfx Aasv Ukz Asgopd Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Free delivery to site/construction location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands). Deliveries to EU member states upon individual agreement.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, WEISHAUPT WM-G10/A-4; Dengan jalur gas - Daya: 110-1250 kW - Tahun pembuatan: 2011 - Tipe: ZM Fpsdpfx Aewgym Dsaged

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Used, modernized 3D CNC coordinate measuring machine. The machine has been fully modernized, equipped with REVO2, the latest high-tech probe system from Renishaw, new control unit, temperature compensation, a new computer system with an i7 processor, Windows 11 Pro operating system, and the current version of the 3D software RationalDMIS V2025. Technical Data: Measuring range: X = 1200 mm - Y = 2400 mm - Z = 1000 mm Measurement uncertainty: MPEE: 2.7+L/300 MPEP: 1.8 in compliance with the manufacturer’s specified ambient conditions Machine weight: approx. 7,250 kg Permissible workpiece mass: 2,500 kg External dimensions of the measuring machine: Length: 3,540 mm - Width: 2,050 mm - Height: 3,770 mm (minimum room height 3,870 mm) Unobstructed clearance around the machine: 600 mm on all sides. Fjdpowptiwsfx Aagopd The machine is ready for demonstration at our premises. You are welcome to arrange a visit at our facility so we can demonstrate the system’s performance to you.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995,

Kondisi: baru, berat muatan maksimum: 32.703 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 13.630 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.712 mm, Perlengkapan: ABS,

Tahun pembuatan: 2016, Kondisi: bekas, Various aluminium saw machines in stock Fpjdpfxjf Rihvj Aagjd

Kondisi: baru, Tahun pembuatan: 2025, Alle Edelstahltrommel-Mischer – schnelle Lieferung eines Geräts Neu nach Bestellung gefertigt Trommel aus Edelstahl, gefertigt aus hochwertigem 316er Edelstahl Drehzahl der Trommel stufenlos regelbar von 0 bis 24 U/min Elektrische Kippentleerung Kapazität 50 kg bis 90 kg, abhängig vom Produkttyp Fpedpoif Upfofx Aaged 2 Modelle verfügbar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, 4 Stk. Edelstahltrichter 3 Stk. Trichter Abmessungen: 700 mm x 1200 mm x 1220 mm (H) 1 Stk. Trichter, Abmessungen: 1200 mm x 1200 mm x 1220 mm (H) Mit Handabsperrschieber Fjdpfx Aaourf Twjgspd Deckel mit Gasdruckfeder Innenliegendes Edelstahl-Sieb Mobil auf feststellbaren Lenkrollen Teilweise mit pneumatischer Vibrationsvorrichtung Teilweise mit Füllstandssensor In ausgezeichnetem Zustand

Kondisi: bekas, de-Nordson Problue 4 Schmelzklebstoffpumpe Fjdpfewq Sv Esx Aagjpd Modell Problue 4 Komplett mit 2 beheizten Schläuchen und Auftragsköpfen, Luft-Magnetventil & Modulen Klebstoffauftragswanne / Aufbewahrungsbehälter Montiert auf einem Edelstahlgestell

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 850 mm, lubang pisau gergaji: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: up to 40 pieces Fpsdpfx Aajypbx Eegsd Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth profiles, including special shapes Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks up the topmost saw blade from magazine 1. Transfer to the Woodtronic NC4, cover opens. 2nd Step: Loader returns. The Woodtronic NC4 is closed and the grinding program starts. The loader removes the spacer ring from magazine 1 and places it in magazine 2. Standby position. 3rd Step: After the grinding process and opening of the Woodtronic, the loader removes the ground saw blade and places it in magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding process is completed. Pre-programming possible: Grinding operation runs uninterrupted even when programming the next magazine. The Woodtronic NC4 can be pre-programmed during the day and grinds automatically at night. Measurables with WALTER Saw Check: Rake angles, Clearance angles, Diameter, Number of teeth Tooth form: manual entry required MACHINE DETAILS Operating hours: 4,197 h (according to previous owner, unverified information) EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1995, kapasitas angkut: 70.000 kg, nomor mesin/kendaraan: 65068, Perlengkapan: derek, kabin, kebisingan rendah, Beschreibung Gebrauchter LKW-aufgebauter Gelände-Kran Hersteller: Tadano Faun Modell: ATF70-4 Der Kran verfügt über eine maximale Tragfähigkeit von 70 Tonnen. Die Maschine wird im aktuellen Zustand verkauft. Angetrieben von einem Dieselmotor. Für weitere Informationen kontaktieren Sie bitte: VIJAY Fpsdpfx Aeul Uvusaged JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapore 128478

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 03, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, Wir verfügen über 17 Sätze NF42 4/54, 2/130, 2/84, 2/66, Baujahr 1987–2005. Ausstattung: - Doppelte Eisenwalze - Gummipresser - 16–20 Schaftmaschinenrahmen - Garnbinder mit Binderfadenbewegung - 6 Kontaktleisten und Stillstandsanzeige - 2 Schusseintrag-Transportsysteme Zustand: Gereinigt und überholt, getestet nach Reparatur Fpsdeu A Ir Eopfx Aagsd