Beli Kamp bekas (150)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin Serut Rata Bodpfx Aexx Sunsarslr - dengan alat pengumpan ELU MVA 16, rol pendorong baru, lengkap dengan dudukan, terpasang pada mesin serut rata - 0,25 - 4,5 kW - meja cor besi panjang 2,5 m - 2 shaft pisau, penutup shaft pisau - pengaturan meja serut menggunakan roda tangan - lebar ketam 410 mm - konstruksi sangat stabil

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 439917, jenis arus masuk: tiga fasa, panjang total: 2.200 mm, tahun perombakan terakhir: 2025, lebar kerja: 1.800 mm, lebar total: 2.200 mm, tinggi total: 1.380 mm, panjang rol: 915 mm, berat keseluruhan: 4.082 kg, Walsmolen Roskamp SP 1600 yang telah direnovasi sepenuhnya Sepasang rol tinggi tunggal Panjang rol: 915 mm Diameter rol: 405 mm Berat: 4082 kg Bodpfx Aasx Aiflerslr Daya motor: 45 kW Tahun pembuatan: 2006

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.000 kg, panjang total: 4.000 mm, lebar total: 3.000 mm, tinggi total: 1.500 mm, Slitter rewinder, can be used with a support roll winding system or as a standard non-contact winder, depending on the substrate and required web tension. - Used until the year 2000 and then extensively modernized - Upgraded electrical control equipment with Siemens S7 PLC - Modified winding drives with CT control Commander SE, both individually adjustable - Reversible winding drives (direction of rotation) - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding system, pneumatic sensor - Max. rewind diameter 500 mm 2 pcs. 3” winding shafts - Max. unwind diameter 1000 mm Bsdpfx Aaoxbyf Hsrelr 1 pc. 3” unwind shaft - Pneumatically controlled unwinding brake - Cutting system: rotary knives (3 units available) - Hengstler running meter counter - Main drive, electronically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Siemens S7 PLC software file available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium, etc. - Required floor space minimum 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions unwinder (without slitting unit) • width 170 cm • length 220 cm • height 110 cm • weight 490 kg - Dimensions slitting unit (without unwinder) • width 230 cm • length 140 cm • height 140 cm • weight 1490 kg - Control panel (including accessories) • width 70 cm • length 120 cm • height 120 cm • weight 240 kg

Kondisi: bekas, Penawaran ini untuk 1 dari 2 Gallenkamp magnetic stirrer yang tersedia. Blodpfx Aaexzh D Dorjr

Kondisi: baik (bekas), 1 mesin bor ulir koordinat bekas dengan pusat koordinat Merek: Hartkämper Tipe: S 35-100 Data teknis: Daya bor maks.: 18 mm Kapasitas tapping hingga M10 Kedalaman bor: 90 mm Jarak jangkauan: 215 mm Jarak spindel ke meja: 150-450 mm Diameter kolom: 75 mm di atas meja koordinat Dengan display digital Heidenhain untuk sumbu X dan Y Panjang pengukuran sumbu X: 1000 mm Blsdpfsxuqd Tsx Aarer Dimensi (jejak lantai mesin): Panjang: 1360 mm Tinggi: 1700 mm Kedalaman: 1000 mm

Kondisi: baik (bekas), de2huinltitlvnbnlpl Bledpfx Aaeu N Sibjrer

Kondisi: bekas, Collet diameter: 4 - 24 mm Max. grindable radius: 12 mm Grinding range: 4 - 24 mm Grinding wheel diameter: 100 mm Total power requirement: 0.4 kW Machine weight approx.: 100 kg Space requirement approx.: 1 x 0.6 x 0.4 m Engraving cutter grinding machine with 19 collets (4-14 mm), 12 pieces of 100 mm grinding wheels, wheel dressing device. Design similar to Deckel S1 + S0. This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM. Blodev Dxzpspfx Aarsr

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 1.000 h, SEPARATOR UNTUK MEDIA PADAT SEPERTI: LUMPUR LIMBAH, KOTORAN CAIR, WHEY, LIMBAH PEMERASAN BUAH, ... Bljdpfx Aasxtuwhersr PEMISAHAN PARTIKEL CAIR DAN PADAT PENGOMPRESAN HINGGA 28% KANDUNGAN BAHAN KERING, TERGANTUNG PADA KECEPATAN TEKAN YANG DIINGINKAN

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, KAMPWERTH SHD 1600 Mesin Press Balok Horizontal, termasuk 3 Kontainer Pengganti 48000x2800x3000 Press Kertas // Press Sampah // Press Limbah Mesin Press, 1 unit • Tipe: Kampwerth SHD 1600 • Tahun pembuatan: 2001 • Berat kosong: 3500 kg Bodpfxjxm Skrj Aarslr • 15 kW • Dimensi: 5000x2300x3700 mm (dibongkar untuk pengiriman) Kontainer untuk mesin press balok, 3 unit • Tahun pembuatan: 2001 • Volume: 28 m³ • Berat kosong: 3100 kg • Berat isi: 12.000 kg • Dimensi: 7000x2400 mm Lokasi: Bielefeld

Kondisi: bekas, Listing ini untuk Freezer Gallenkamp Super Cold 40. Dilengkapi dengan kunci untuk mengunci freezer. Bledpfjxzhb Nsx Aarsr

Kondisi: bekas, Tahun pembuatan: 2003, Trailer berat, kapasitas angkut 3000 kg. Pabrikan: Kampa, tahun 2003. Bljdstymnajpfx Aarer A5 P 5000 mm L 2000 mm T 500 mm, kapasitas angkut 3000 kg, tahun 2003, mata kait trailer 35 mm, lantai anti-slip yang bagus, produsen KAMPA.

Kondisi: bekas, Tahun pembuatan: 2018, de-to-hu-it-lt Bjdpfx Aasxfqumerslr

Kondisi: baru, Tahun pembuatan: 2025, Cantilever racking for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – New equipment: Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: New equipment Model: Super Light Bsdpfx Aaexbz Ddorjlr Set components: 4 uprights with 5 arms each / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 profile steel with fixed welded arms, spaced approx. 330mm apart. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Incl. floor anchors Incl. load rating plate Description: 4 uprights with 1m pitch as a set including all bolts. Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile – ideal for garages, workshops, or small alcoves, the rack adjusts flexibly to the space. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Bsdpfx Ajgryk Nsarslr Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, berat operasi: 2.000 kg, Tersedia 2 model berbeda. Bjdpexfi T Isfx Aarolr Forklift tersedia untuk pemuatan.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Bsdpfx Aow Ip Dtoarelr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Payload: 20,000 kg, Speed: 6 km/h, Platform height: approx. 2,560 mm, Overall height: approx. 3,330 mm, Unladen weight: 3,325 kg. Includes a suitable roof. The roof is attached at four points with four bolts and can be dismantled if required. Documentation available. On-site inspection possible. Bedpfx Ajvvwn Ejarjlr

Kondisi: bekas, nomor mesin/kendaraan: 19013, Kombinierte Kopierfräsmaschine – Drehmaschine MICHÄL KÄMPF Online-Videoinspektion per Skype-Video möglich. Wir freuen uns sehr auf Ihren Besuch – weitere Maschinen auf Lager. Sofort verfügbar – Besichtigung möglich. Bedpeh Axrysfx Aarslr Lagerstandort: Emskirchen / Nürnberg – Test vor Ort möglich.

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Bodpfenwmwvox Aarslr Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Bedpfx Aj A Dimoarolr Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Control panel: Siemens SIMATIC HMI, connected load: 80 kW, weight: 1.85 t, operating hours: approx. 4,500 h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Complete documentation is available, on-site inspection possible. Bljdpfsv Uz Awex Aaror

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – New item - : Price ex works including loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional uprights (or by varying the axle spacing). This example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Uprights: IPE 180 Single-sided uprights approx. 3,700 mm high, hot-dip galvanized Bledpfxsf Tv T No Aarer Foot and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity at 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg Including longitudinal and diagonal bracing, c/c spacing = 1,300 mm, standard is 1.30 m – unless otherwise specified, we will supply the rack with a 1.30 m axle spacing. Other spacings available, e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or custom sizes! Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Supplied complete with all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport cost within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. With a racking row of 4 uprights (3 bays), the length is approx. 4m. Bsdpfx Aefivhgearolr Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! Bljdpefivhfefx Aaror A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright Bsdefivg Rjpfx Aarelr - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!