Beli Kawat Membungkuk bekas (928)

Kondisi: bekas, Mesin EDM Wire Mitsubishi, Mesin Erosi Listrik, Mitsubishi DWC 150 SZ, Mesin Bekas Produsen: Mitsubishi Tipe: DWC 150 SZ Tahun Pembuatan: 1994 Dimensi Keseluruhan (Unit Utama): Lebar: 1860 mm Panjang: 2050 mm Tinggi: 2400 mm Data Listrik: 400V; 21,5A Berat: 3500 kg Ukuran Tangki Air: 750 x 780 mm Dimensi Lemari Listrik: Lebar: 1150 mm Panjang: 2700 mm Tinggi: 1050 mm Dimensi Unit Pengumpan Kawat: Lebar: 320 mm Panjang: 580 mm Tinggi: 1380 mm Bsdpoyxfqrefx Am Ijlg Dimensi Transformator: Lebar: 510 mm Panjang: 590 mm Tinggi: 640 mm Dimensi Sistem Pengolahan Air: Lebar: 1320 mm Panjang: 1460 mm Tinggi: 1360 mm Kondisi: Belum diuji, dijual dalam kondisi "apa adanya". Mesin tersedia untuk dijual bersama aksesori dan dalam kondisi estetis sesuai foto.

Kondisi: baik (bekas), Tahun pembuatan: 2001,

Kondisi: bekas, Tahun pembuatan: 2005,

Tahun pembuatan: 2010, Kondisi: baru,

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine is in good working condition. Blsdpfxjw Rqu Sj Am Iog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Travel paths: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath Blsdpfx Aom Uyuxom Ieg incl. chiller Automatic wire threading

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, de-001 Bsdeyxgtuepfx Am Islg

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Gamma 333 berfungsi sepenuhnya. Blsdpfx Amsy Ah R No Iog

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, panjang bagian (min.): 100 mm, panjang bagian (maks.): 3.500 mm, jenis arus masuk: tiga fasa, Dijual mesin pelurus kawat bekas WAFIOS RS4 dalam kondisi baik. Data teknis: Bjdpfx Aew U Eubom Islg • Model: RS4 • Produsen: WAFIOS • Rentang pelurusan: 3 hingga 6 mm • Perlengkapan: termasuk pisau, batu pelurus, rol penarik berbagai mm, haspel • Tahun pembuatan: 2011 Kondisi: • Berfungsi penuh, dirawat secara berkala Lokasi: 74931 Lobbach Harga: €9.900 netto

Tahun pembuatan: 1998, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 3163, Working width: 1050 mm Sheet thickness: 1.5 mm Upper roller diameter: 70 mm Lower roller diameter: 70 mm Weight: 320 kg Blodpfxsbpythj Am Ijg Required space: 700 x 1300 x 1100 mm The machine comes from remaining stock.

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 64532, used manual hydraulic pipe bending device Available bending segments: 3/8, 3/4, 1 1/4 and 2" Blsdpfodzw Hwex Am Ieg Required space: 850 x 640 x 780 mm

Kondisi: bekas, Max. working width: 1100 mm for sheet thickness (steel): up to approx. 1 mm Blodpfx Aocaxvhjm Iog electric drive: 380 V, 0.75 kW Space requirements: 2330 x 600 x 1140 mm Weight: 357 kg

Tahun pembuatan: 1996, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 910/96/221, Working width: 1030 mm Bledpfx Aobpytpom Iog Sheet thickness: 1 mm Top roller diameter: 60 mm Bottom roller diameter: 60 mm Weight: 170 kg Required space: 560 x 1570 x 1080 mm The machine comes from remaining stock.

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 364, Maximum pressure at 4.2 l/min: 550 - 570 bar Capacity approx.: 30 l Hydraulic motor: 220/380 V, 1400 rpm, 4 kW Straightening cutter, Type GS 22 Cutting range at 140 kg tensile strength: 6 - 12 mm Ø Cutting rate approx.: 8 - 12 /min Straightening device, Type RK 26 For straightening flat steel and round material with a tensile strength of: 26 - 50 kg Weight approx.: 10 kg Bsdpfx Ajb Nuugom Islg Space requirement: 1200 x 900 x 850 mm Total weight approx.: 130 kg

Tahun pembuatan: 1996, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 910/96/221, Working width: 1030 mm Sheet thickness: 1 mm Bledpfx Asb N Eu Iom Isg Top roll diameter: 60 mm Bottom roll diameter: 60 mm Weight: 170 kg Space requirements: 560 x 1570 x 1080 mm

Kondisi: bekas, Working width: 1020 mm Sheet thickness: 1 mm Bledpjda I Itofx Am Ijg Upper roller diameter: 55 mm Lower roller diameter: 55 mm Space requirement: 1370 x 570 x 1100 mm

Tahun pembuatan: 1980, Kondisi: bekas, nomor mesin/kendaraan: 80246, Maximum tube diameter: 60.3 x 3.2 mm Maximum bending angle: 180° Mandrel holder length: 3000 mm Bljdpfx Ams N Hfpe Ijg electrical connection: 380 V, 8.6 kW Required space: 2400 x 5700 x 1500 mm Weight: approx. 2500 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1978, nomor mesin/kendaraan: 4303, Working width: 3000 mm Sheet thickness: 15 mm Sheet thickness for bending: 10 mm Upper roller diameter: 320 mm Blsdpod D Nxxefx Am Ijg Lower roller diameter: 310 mm Working speed: approx. 5.5 m/min Electrical connection: 380 V kW Weight: approx. 17,000 kg Required space: 5450 x 2100 x 2450 mm

Kondisi: bekas, Tahun pembuatan: 2015, lebar konstruksi: 400 mm, 1 Blsdpfxshctyks Am Ieg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Bljdoyu Nqmspfx Am Ieg Max. workpiece weight: 350 kg (Submerged) Working tank dimensions (W×D): 850 × 610 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: 150 mm V-axis travel: 150 mm Taper angle (on workpiece, thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Maximum wire feed speed: 420 mm/s Wire tension: 3 – 23 N Machining method: Flushing / Immersion Distance from floor to table top: 995 mm Wire spool weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Installation space (W×D): 3,350 × 3,850 mm Machine weight (incl. power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power consumption: 3-phase, 50/60 Hz, 13 kVA External dimensions of dielectric tank (W×D): 700 × 2,155 mm Weight of dielectric tank (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 interchangeable paper filters (internal pressure type) Deioniser: Ion exchange resin (Type 18 L)

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 100153, berat keseluruhan: 12.000 kg, tinggi total: 3.009 mm, lebar total: 1.780 mm, panjang total: 4.487 mm, Dengan DW288, kecepatan tinggi dan presisi dari teknologi kawat berlian menjadi hal yang sudah sepatutnya. DW288 yang telah memenangkan penghargaan ini dirancang khusus untuk produksi wafer mono- dan multikristalin, dan dapat dioperasikan baik dengan teknologi kawat berlian maupun slurry. Mesin ini juga ditujukan untuk output tinggi dengan kawat berlian yang sangat tipis dan bekerja pada kecepatan tertinggi. Bodpfx Amew Nhnas Islg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.000 kg, ukuran mesh: 50.100 mm, 300 x alas kisi untuk rak rak palet (untuk Europallet) sekitar 88 cm x 110 cm, galvanis Daya angkut 1000 kg (dengan beban yang didistribusikan merata) Untuk balok melintang panjang 182,5 cm + 270 cm dengan lebar balok 4 cm Pengiriman: - maksimal 7 hari kerja setelah pembayaran diterima Bedpjyzb Acofx Am Islg - bebas di lokasi proyek/tempat pemasangan - Pembongkaran dari truk dilakukan oleh pembeli dengan alat angkat sendiri - Pengiriman ke seluruh wilayah Jerman kecuali pulau! Pengiriman ke negara-negara UE sesuai kesepakatan individu.

Tahun pembuatan: 2024, Kondisi: baru, MRB-S Series Technical Data (see images) Standard Equipment - CE certification - Conical bending - Motorized rear roll - Additional control panel for upper and lower rolls, operable with mobile chassis - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction - Support stands and brake system for precise bending (for 2.5 and 3m machines) - Digital display - Motorized rear roll with feeding Optional Equipment - Motorized bottom roll mounting - Ground rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments MRB Series: Technical Data (see images) Standard Equipment - CE standard - Digital display - Conical bending - Motorized rear roll with feeding - Additional control panel for upper and lower rolls, operable with mobile chassis - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction - Brake system for precise bending Optional Equipment - Motorized bottom roll with feeding - Polished rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments Everything can be configured according to your requirements, with very short production and delivery times. Bsdpfefin E Dsx Am Ijlg Further information is available upon request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines worldwide and, with its headquarters in Turkey, has established itself as one of the world’s largest manufacturers of sheet metal machinery. With over 60 years of experience in research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced production facilities covering a total of 150,000m², the Durmazlar Group and its DURMA machines are today among the internationally recognized producers in the sector, distributing products to 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an essential part of the Central Hessen region. Here, we are your direct contact on behalf of Durmazlar, ready to provide expert advice and support when it comes to sheet metal machinery. Our demonstration center gives you the opportunity to get a hands-on look at our machines, experience firsthand the quality and precision technology of our products, and receive the best possible consultation tailored to your business goals. Our mission is to be your local direct partner and to offer you comprehensive services including training and customer support. We are happy to support you directly from Germany—from consultation and purchase to the entire service life of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. Here we are your reliable partner for advanced technological solutions in sheet metal processing.

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Bledjftdh Ispfx Am Iog Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request.

Tahun pembuatan: 2024, Kondisi: baru, Control unit – with NC control Conical bending device Side roller positioning electronically synchronized via PLC Safety mechanism for welding (welding capability) on the machine Machine frame made from stress-relieved annealed steel 4-roller drive system – upper and lower rollers driven by hydraulic motors and synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic overload protection Lower roller pressure adjustable hydraulically Hydraulic roller brake to prevent sheet slipping Hydraulic swing-out upper roller bearing for easy removal of the formed plate Safety wire Induction-hardened rollers (HRC 54), crowned (“bombed”) Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Upper roller: 230 mm Lower roller: 210 mm Maximum roller opening: 30 mm Length: 3830 mm Width: 1160 mm Bsdpfx Amedzzyfo Ielg Height: 1200 mm Motor power: 11 kW Weight: 4700 kg