Beli Kecambah Punch bekas (1.704)

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, lebar total: 4.000 mm, panjang total: 5.000 mm, tinggi total: 3.000 mm, berat keseluruhan: 7.500 kg, lebar kerja: 2.000 mm, gaya punching: 50 t, Working width: 2000 mm Punching head: 650 x 650 mm Punching head is equipped with mechanically adjustable bottom dead center stops and can be rotated/swiveled (with digital counter for punching depth to simplify adjustment) Punching force: 50 t Punching strip with automatic gripper feed, including strip changeover Machine is equipped with CNC control Decoilers are not included in the scope of delivery Godpfswlu N Dox Adtebg The punching machine runs perfectly and is still ready for operation

Kondisi: bekas, Hydraulic punch, punch frame for use with JOKA punch units type HP-S Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punch unit width: max. 54 mm Punch unit installation height: max. 220 mm Gsdpsltrmuofx Adtobg Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punch units - Throat depth of the punch unit can be larger, punch unit can be pushed through to the rear - Stroke activated by electric two-hand operation - Hydraulic power unit HAWE, type HCW 4 / 2.5-B 1/400-1 - Mounted on mobile frame Space requirement (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BELOW Gbjdpfxevf Iubs Adtsg Equipment / further details: With heating for embossing Also of great interest for the textile industry

Kondisi: baik (bekas), Tahun pembuatan: 2000, Used Voortman punch and shear line | CNC FLAT BAR PUNCH & SHEAR LINE Capacity: Gsdpfxov Rhabs Adtobg flat: 500 x 22 mm square: 150 x 150 x 15 mm Including counter Video available upon request

Kondisi: bekas, de Gbjdpjxnixvsfx Adtsg

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 47885/05, Pneumatic punching units for window profiles Gbedpfxeff Apie Adteg Stroke: 20 mm

Kondisi: siap digunakan (bekas), Pressing force: 10 t Throat depth: 110 mm Required space: 300 x 170 x 680 mm Gbsdpfx Adohtq Hfeteg Weight: 32 kg

Kondisi: baru, 자동 캘린더 펀칭 및 제본기 Gbsdpfx Adji Arm Reteg RILECART PB-796

Tahun pembuatan: 1995, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 458/08 (C.2.144.1301/02), Maximum format: B1 Voltage: 100–240V // 300–330VA // 50/60Hz Godpfx Adjfh Dp Tstebg Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our inventory. ON REQUEST.

Tahun pembuatan: 1985, Kondisi: baik (bekas), Bobst SP 130 E Baujahr: 1985 Max. Format: 920 x 1300 mm Min. Format: 450 x 580 mm Max. Geschwindigkeit: 7.000 Bogen/Stunde Max. Stanzkraft: 500 t Gjdpfx Adoif Ed Detjbg Mit Centerline-System Sofort verfügbar.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, jam operasional: 72.918 h, daya laser: 2.700 W, gaya punching: 22 t, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 8 mm, tebal plat aluminium (maks.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching operation: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Performance Data Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity (mild steel): 8 mm Cutting capacity (aluminium): 4 mm Cutting capacity (stainless steel): 6 mm Maximum punching force: 220 kN Active hold-down (programmable in increments): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm Thread forming: 180 rpm Punching stroke rate (E = 1): 900 strokes/min Marking: 2,800 strokes/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Accuracy Position deviation: ±0.10 mm Average position scatter: ±0.03 mm Programmable chutes for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: Base Siemens Sinumerik 840D MACHINE DETAILS Gbjdpfx Adew Suwystsg Laser on-time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Kondisi: baik (bekas), nomor mesin/kendaraan: 550C08, A used punching machine PEDDINGHAUS with large throat depth and spacious support table with stops Gsdjd Hxrtspfx Adtjbg Punching force: 45 tons Strokes: 40 strokes/min Throat depth: 762 mm Working height: 1110 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, DE2024-06-03-01 Gsdpfxew I N H Uj Adtobg

Kondisi: perlu perbaikan (bekas), Machine number: 63882 Type / Model: 8LES Pressing force: 22 t Table: 900 x 450 mm Gbodpfxogd R Sgo Adteg Ram width: 350 mm Installation height without / with bolster plate: mm Stroke: 8 to 150 mm Condition: Dismantled, needs to be assembled, not tested The cylinder mount was broken on this machine. A replacement part has been manufactured – see pictures for reference. Price as-is, price after assembly on request.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lebar bukaan: maks. 150 mm Gbodpfx Adoxg Rxuotog Tinggi bukaan: maks. 5,0 mm Lainnya: Cocok untuk memotong kisi stamping Pengoperasian melalui plunger press, penarikan ulang dengan pegas

Kondisi: baru, Tahun pembuatan: 2024, gaya punching: 55 t, e3a5e0b5-fffd-491a-9302-5fa6aae91430 Gjdjvg D Nkspfx Adtobg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 28 t, panjang benda kerja (maks.): 1.000 mm, lebar benda kerja (maks.): 2.000 mm, RINCIAN TEKNIS Lebar plat: 2.000 mm Panjang plat: 1.000 mm Gaya punching: 28 t RINCIAN MESIN Berat mesin: sekitar 11.000 kg PERLENGKAPAN - berbagai alat Gedpfx Adsw Suvvstsbg

Kondisi: bekas, Punching tool with linearly integrated punching brackets ABS-SCHWABE Type 100/160 11 punching brackets, punching unit for press brakes Year of manufacture: approx. 1990 Throat depth: 160 mm Gbodpfx Adsdz Sp Hjtsg Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (punching bracket only, with punching tool) Currently fitted with a round punch tool, ø 5 mm Punching bracket pitch: 195 mm - The tool unit was mounted on a hydraulic press brake Punching bracket base plate dimensions (L x W x H): 2500 x 345 x 37.5 mm Punching bracket pressure plate dimensions (L x W x H): 2500 x 173 x 20 mm Total dimensions (L x W x H): 2500 x 345 x 300 mm Weight: 400 kg Good condition

Kondisi: baru, Tahun pembuatan: 2024, gaya punching: 85 t, daya: 7,5 kW (10,20 hp), COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS DELIVERY DATE: PLEASE INQUIRE DELIVERY TERMS: EXW BURSA/TURKEY STANDARD FEATURES: • 12 separate hydraulic pistons and 2 separate foot pedals allowing two operators to work simultaneously • Adjustable piston stroke for faster processing • Centralized lubrication system • Electrically-switched rear stop • Work light • 5 separate work stations on the same body: 6.1 - Ø22 mm punch and die set and standard punching tools 6.2 - Solid round and square bar cutting blade set 6.3 - Angle cutting blade set 6.4 - Flat bar and sheet cutting blade set 6.5 - U-notch blade set Gbedpsvfyngjfx Adtog TECHNICAL SPECIFICATIONS: Capacity: 85 tons Motor power: 7.5 kW Dimensions: 1,920 x 950 x 2,040 mm (L x W x H) Weight: 2,315 kg PUNCHING: Punching capacity: Ø33 mm x 20 mm thickness. Throat depth: 355 mm. Punching stroke: 80 mm. Working height: 1,080 mm. CUTTING: Plates: 380 x 20 mm, 480 x 15 mm. Blade length: 482 mm. Round bars: Ø50 mm. Square bars: 50 mm. 90° angle profiles: 150 x 150 x 15 mm. 45° angle profiles: 80 x 8 mm. NOTCHING: Max thickness: 13 mm. Width: 52 mm. Depth: 100 mm. Working height: 940 mm.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 28 t, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.000 mm, DETAIL TEKNIS Kekuatan tekan: 28 t Sumbu X: 2000 mm Sumbu Y: 1000 mm DETAIL MESIN Gjdpfew Suu Sox Adtjbg Berat mesin: sekitar 11.000 kg

Kondisi: bekas, Single-column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table area: 630 x 530 mm Gjdpfjk S Htxjx Adtjbg Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Maximum installation height: 450 mm Strokes per minute: 115 spm Minimum compressed air supply: 4.5 bar Motor power: 4 kW Power supply: 380 V, 50 Hz Table height above floor: approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction threaded clutch with upper dead center run-through protection - Front crankshaft support bearing - Press table height adjustable by 2 threaded spindles - Manual centralized grease lubrication - Freestanding control cabinet - UVV safety regulations for manual loading Space requirement L x W x H: 1750 x 1600 x 2430 mm Weight: 4.5 tons Good condition.

Kondisi: baru, Tahun pembuatan: 2024, gaya punching: 115 t, daya: 11 kW (14,96 hp), MANUFACTURING LOCATION: TURKEY WARRANTY PERIOD: 12 MONTHS DELIVERY DATE: PLEASE INQUIRE DELIVERY TERM: EXW BURSA/TURKEY STANDARD FEATURES: • 12 individual hydraulic cylinders and 2 separate foot pedals allowing two operators to work simultaneously • Adjustable piston stroke distance for faster operation • Centralized lubrication system • Rear stop with electric switch • Work lamp • 5 different workstations on the same frame: 1. Ø26 mm punch and die with standard punching tools 2. Solid round and solid square bar cutting blade set 3. Angle iron cutting blade set 4. Flat bar and sheet metal cutting blade set 5. U-notch cutting blade set TECHNICAL SPECIFICATIONS: Punching force: 115 t Gsdevfynmepfx Adtsbg Throat depth: 355 mm Stroke: 80 mm Strokes per minute (at 20 mm stroke): 25 Sheet thickness (max.): Ø 34 x 26 mm Working height: 935 mm Cutting capacity: 600 x 15 mm; 380 x 25 mm Steel angle 45° (1 leg): 80 x 80 x 10 mm Steel angle 90°: 150 x 150 x 16 mm Blade length: 610 mm Round: 55 mm Square: 50 mm Material thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor power: 11.0 kW Mains voltage: 400 V 50 Hz Height: 2,180 mm Weight: 2,920 kg

Kondisi: bekas, Flatbed Die Cutter - Swing-Frame Die Cutter - Flatbed Press - Platen Press - Eccentric Press Die cutter + feeder for use with strip steel rule die cutting tools Flatbed Die Cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture 1998 Press force 25 tons Clearance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = mounting frame width 510 x depth 440 mm, plate thickness 20 mm Ram area 800 x 670 mm Drop-through hole in table 490 x 420 mm Ram stroke 45 mm Adjustable ram travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Power supply 400 Volt, 50 Hz - regulated drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - ram balance cylinder - automatic central lubrication VOGEL - solid base plate with 4 vibration-damping elements under the machine Space requirement (L x W x H) approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Gbsdpfxedzqmzo Adteg Good condition Previously, the machine was used for punching cardboard blanks. Ideal for punching nonwoven materials or similar, e.g. for respirator masks.

Kondisi: bekas, Double-column eccentric stamping press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine No. 88151005 Year of manufacture 1988 / 92 Pressing force: 160 tons Frame width: 970 mm Frame width lateral: 560 mm Table size: 900 x 900 mm Ram surface: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes: 25 to 70 strokes/min. Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Mains connection: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight counterbalance cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Control cabinets for press and feed unit, mounted together on a platform adjacent to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed: 2100 mm Depth of the press with drive motor: 2300 mm Overall height of the press: 4150 mm Net weight of stamping press: approx. 18 tons For transport, the drive motor is dismantled and the machine is laid on its side. Included: NC roller feed-straightening machine ALBA Type GGVHY400 Unit Nos. 1405 and 1406, Order No. 910708 (Year of manufacture 1992) - Feed control ALBA PSS 300 Gbsdedzqlvepfx Adteg - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross section max. 1200 mm² - Roller drive of the feed hydraulically controlled - Height-adjustable feed unit on press for adapting material entry height - Adjacent hydraulic unit - Drag straightener with hydraulic opening and closing Weight of complete system: approx. 24 tons Space required for transport: one mega trailer with 3 meter internal height and 13.6 meter loading length Good condition

Kondisi: bekas, 5-station combined section steel shear PEDDINGHAUS type 210 AD/13 Machine No. 529A059 Year of manufacture: approx. 1970 Punching station: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet Ø 20 mm in 19 mm sheet Throat depth 365 mm Round bar shear: Cutting capacity round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Section steel shear: Cutting capacity angle steel at 90° 110 x 10 mm Cutting capacity angle steel at 45° 90 x 9 mm T-section 110 x 10 mm Notching station: Rectangular notcher up to 12 mm sheet Punch size 85 x 50 mm Gbedpfji Duh Iox Adtog Motor power 3 kW Power supply 380 Volt, 50 Hz - Center punch device via hand lever and centering device - Mechanical stroke release by hand lever - Flat bar shear equipped with 2° blade - Mechanical hold-down on the section steel shear, round bar shear, and flat bar shear Space requirements (L x W x H) 1500 x 800 x 1900 mm Weight 2000 kg Good condition