Beli Keppler bekas (12)

Kondisi: bekas, Tahun pembuatan: 2008, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.400 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, HDC3000 dengan 6 sumbu • Perjalanan sumbu: X=3000 mm, Y=1500 mm, Z=1400 mm Knjdsxmr T Tjpfx Adqsc • Heidenhain TNC 530 dengan handwheel • Meja putar NC untuk pemesinan 5 sisi 1250 mm x 1600 mm • Kepala bor-milling universal NC 2-sumbu, operasi simultan penuh dan posisi • Spindel 10.000 rpm HSK100, S1=220 Nm torsi spindel • Sistem pergantian alat HSK100 / 60 slot – alat hingga panjang 800 mm • Konveyor serpihan • Dioptimalkan untuk pemesinan 5 sisi termasuk pengeboran lubang dalam • Penyediaan pendingin • Unit peniup udara bagian dalam / luar • Pendingin bertekanan 60 bar untuk pengeboran lubang dalam • Penutup penuh • Diameter zona kerja besar 2800 mm • Termasuk pistol pencuci • Waktu pengiriman singkat, penjualan antara waktu dapat dilakukan

Kondisi: bekas, berat keseluruhan: 18.000 kg, berat muatan maksimum: 12.280 kg, konfigurasi gandar: 2 gandar, volume ruang muat: 39 m³, panjang ruang muatan: 7.850 mm, lebar ruang muat: 2.440 mm, tinggi ruang muatan: 2.060 mm, pendaftaran pertama: 03/2005, inspeksi berikutnya (TÜV): 04/2026, Tahun pembuatan: 2005, Perlengkapan: ABS,

Kondisi: bekas, berat keseluruhan: 18.000 kg, berat muatan maksimum: 12.050 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.300 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 2.090 mm, pendaftaran pertama: 09/2004, Perlengkapan: ABS, tail lift,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, • Travel distances: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 530 control system with HR 410 handwheel • NC rotary table for multi-side machining, 1600 mm x 1250 mm • 1-axis NC universal boring and milling head for simultaneous and positioning operation (A-axis, 45° axis) • Motor spindle: maximum 7,000 rpm, SK 50 taper, 530 Nm spindle torque • Tool changer system for SK 50, 40 positions, accommodates tools up to 400 mm in length • Chip augers along the X-axis for optimal chip evacuation • Chip conveyor (hinged belt type) for transverse evacuation, manufacturer: Knoll, discharge at the front • Coolant system, 950 l capacity, manufacturer: Knoll • External/internal air supply at the spindle • ICS (internal coolant supply) 60 bar for deep hole machining • Operating mode 4 • Fully enclosed machine cabin with safety glass sliding doors, optimized for crane loading Knodexmr Uwjpfx Adqsc • Split sliding doors at the front • Split sliding doors on operator side • Wireless probing system RMP 60 • Including cleaning gun • Short delivery time upon request; subject to prior sale • Used machine • Z-axis ball screw replaced, including bearings, in September 2023 • Optional: clamping elements and anchor rods • Optional: commissioning/setup • Optional: transport

Kondisi: bekas, berat keseluruhan: 18.000 kg, berat muatan maksimum: 12.280 kg, konfigurasi gandar: 2 gandar, volume ruang muat: 39 m³, panjang ruang muatan: 7.850 mm, lebar ruang muat: 2.440 mm, tinggi ruang muatan: 2.060 mm, pendaftaran pertama: 03/2005, inspeksi berikutnya (TÜV): 04/2026, Tahun pembuatan: 2005, Perlengkapan: ABS,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Immediately available! Gantry-type Milling Machine FS 1200 • Total travel in X-axis: 12,000 mm – ideal for flexible large-part machining • Travels: X = 12,000 mm; Y = 1,500 mm; Z = 3,500 mm • Heidenhain iTNC 530 control with wireless HR 550 FS handwheel, operator's cabin mounted on the gantry • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation for each gantry • Spindle: HSK-A 100, 10,000 rpm, 220 Nm spindle torque • Air through spindle up to 6 bar • Dust protection packages for the protection of guideways and drives • 4 support bases per gantry • Wireless measuring probe RMP 60 (Renishaw) • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring: ToolScope basic system • Additional operator panel at the rear of the machine • Partial enclosure consisting of machining area and sheet metal door, rear with safety fence offering free view into the working area • Includes machine fixators • Cooling units • Includes internal tool cooling (closed-loop cooling circuit) with cooling unit • Short delivery time, available immediately – subject to prior sale Inspection by appointment possible Kedpfxsxmr Uqj Adqenc Spindle hours: approx. 9,079 SPECIAL PRICE!

Kondisi: bekas, berat keseluruhan: 18.000 kg, berat muatan maksimum: 12.280 kg, konfigurasi gandar: 2 gandar, volume ruang muat: 39 m³, panjang ruang muatan: 7.850 mm, lebar ruang muat: 2.440 mm, tinggi ruang muatan: 2.060 mm, pendaftaran pertama: 04/2004, inspeksi berikutnya (TÜV): 03/2026, Tahun pembuatan: 2004, Perlengkapan: ABS,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Immediate Availability: Gantry-Type Machine FS 1200 Knsdjxbpwfopfx Adqoc • Total travel X=21,000 mm, ideal for flexible machining of large components • Travel ranges X=21,000 mm, Y=1,500 mm; Z=3,500 mm • iTNC 530 control system with wireless handheld unit HR 550 FS, operator cabin on the gantry • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation per gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for guideways and drives • BA 4 per gantry • Wireless probing system RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope basic system • Additional operator panel at the rear of the unit • Partial enclosure consisting of work area and metal door, rear with protective fencing and clear view into work area • incl. leveling pads • Cooling units • incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, available immediately, ---subject to prior sale--- Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Kondisi: bekas, berat keseluruhan: 18.000 kg, berat muatan maksimum: 12.280 kg, konfigurasi gandar: 2 gandar, volume ruang muat: 39 m³, panjang ruang muatan: 7.850 mm, lebar ruang muat: 2.440 mm, tinggi ruang muatan: 2.060 mm, pendaftaran pertama: 04/2004, inspeksi berikutnya (TÜV): 03/2026, Tahun pembuatan: 2004, Perlengkapan: ABS,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, FS 480 Gantry-Type Machine – Immediately Available • Total travel range X=4800 mm, ideal for flexible machining of large components • Travel paths: X=4,800 mm, Y=1,500 mm, Z=3,500 mm • iTNC 530 CNC control with wireless HR 550 FS handwheel, operator’s cabin mounted on the gantry • 2-axis NC universal drilling/milling head, full simultaneous and positioning operation for each gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for safeguarding guides and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor on the rear side of the system Knodpfx Adjxbpv Ieqjc • Process monitoring with ToolScope basic system • Additional operator panel at the rear of the machine • Partial enclosure consisting of work area and sheet metal door, rear side equipped with a safety fence providing unobstructed view into the work area • Includes fixators • Cooling units • Includes internal tool cooling (closed cooling circuit) with chiller unit • Short delivery time, available immediately, ---subject to prior sale--- Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!!

Kondisi: baru, Tahun pembuatan: 2024, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.400 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, New machine with completion date 02/2024 HDC3000 with 6 axes • Travel ranges X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal boring and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – tools up to 800 mm long • Chip conveyor • Optimized for 5-sided machining including deep hole drilling Knjdpfjxbpuwjx Adqoc • Coolant supply • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Full enclosure • Large interference circle 2300 mm • Including mounting pads • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation • Optional: transport • Total spindle hours: 23,122 Kjdpfx Adjxbpuksqenc • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale