Beli Kruesi bekas (8)

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 POS 1: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW motor, length 6000 mm POS 2: Longitudinal Saw Saw blade diameter 400 mm Pneumatic adjustment of cutting depth Main motor 4.0 kW POS 5: KRÜSI Chalet Construction Machine / Log House Production Machine Type CM 40 Machine no. 431 Year of manufacture: 1996 Saw Unit: Manual feed Spindle adjustment with analog position indicator CM Milling Unit: Hydropneumatic feed Spindle adjustment with digital position display Pedohw N Npopfx Ab Iord Drilling Unit: Manual feed Spindle adjustment with analog position indicator End Milling Unit: Hydropneumatic feed Spindle adjustment with digital position display POS 6: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW feed motor Length 12,000 mm 9 adjustable, pneumatically controlled stop flaps 10 lateral pushers for material transfer POS 7: Assembly Table 4,400 mm x 12,000 mm Manufacturer: Sweden Year of manufacture: approx. 1985 Assembly table for further processing of manufactured log house beams. 4 chain hoists for transverse transport Gear motor with 4.0 kW

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Krüsimatic G2 Joinery Centre – Used, Fully Refurbished Condition & Refurbishment The machine has been completely overhauled by Krüsi Maschinenbau AG. It is supplied with a new control unit, controllers, servo motors, and wiring – including a 12-month warranty on the mechanics and new components. Technical Specifications • Maximum timber cross-section: 200 x 320 mm • Infeed length: 10,000 mm • Outfeed length: 10,000 mm • Supply voltage: 3 x 400 V / 50 Hz • Fusing: 3 x 63 A (provided by customer) • Pneumatic pressure: ≥ 8 bar • Air consumption: 10 – 15 m³/h • Machine control: IST Software / Abb3d • Interface: BTL-compatible Machining Units Portal 1: • 5-axis saw unit (angle-limited) • 4-axis milling unit with 5-position spindle head (horizontal) + marker • 4-axis notching unit with 2-position spindle head (vertical) • Drilling unit with two horizontal tool holders • Chain mortising unit Portal 2: • Two chalet milling motors (vertical) • Two chalet milling motors (horizontal) Pedpfx Aswb Ev Heb Ijrd • Two drilling units (horizontal) • Grooving unit (horizontal & vertical) Accessory Equipment • Comprehensive tool kit included • Two compressed air tanks for weight compensation of the portals An excellent opportunity for carpentry shops, timber construction companies, and joinery centres seeking reliability and precision – supplied with factory warranty.

Kondisi: baik (bekas), Tahun pembuatan: 1994, I am selling an automatic CNC machining center for BLOCK HOUSE production, Krüsi CM-40, year of manufacture 1994. - Cross-cut saw - Tenoning unit Top and Bottom - Tenoning unit Left and Right - Dowel drilling unit Prsdpfxjr Atcys Ab Ijd - 4-head milling unit - Automatic feed system, precision ±1mm - Infeed length: 12m Especially suitable for timber construction applications! Available immediately.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Werkstück Werkstück X 930 mm Werkstück Y 320 mm Podpfx Ajwdza Hsb Ierd Werkstück Z 190 mm Dieses KRÜSI KM-95 G1 wurde im Jahr 2007 hergestellt. Als CNC-Holzbearbeitungszentrum eignet es sich ideal für eine Vielzahl von Anwendungen in der Holzbearbeitung. Nutzen Sie die Gelegenheit, dieses KRÜSI KM-95 G1 CNC-Holzbearbeitungszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche CNC-Holzbearbeitung

Kondisi: bekas, Tahun pembuatan: 2010, Chalet construction machine Used, good condition, lightly used Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-approved up to 140 mm round log corner joints Sawing: 1x Drilling: 1x Milling: 3x Prodjvwfqqjpfx Ab Ijd Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, sold as seen, without guarantee or warranty

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Zwei Maschinen in einer, gefertigt vom besten Schweizer CNC-Hersteller. 1. Rundholzfräsen 2. Fachwerkbau. Diese Maschine hat 6 Jahre lang bearbeitete Blockhauskonstruktionen in höchster Präzision und Qualität für äußerst anspruchsvolle Kunden produziert (seitdem stillgelegt). Für fortschrittliche Holzbaubetriebe, die Blockhauskonstruktionen aus bis zu 8" x 12" Material automatisieren oder ausschließlich für den Fachwerkbau nutzen möchten. Besonders geeignet für Kunden in den USA oder Kanada, da leicht per Lkw transportierbar. Lieferung, Aufbau, Kalibrierung und Einweisung in Betriebsvorbereitung können zum Selbstkostenpreis arrangiert werden. Eigenständig Kompaktes Design, nur 3 m tief, 2,44 m breit. Alle Bearbeitungsschritte erfolgen innerhalb der Einhausung. Abschnitte fallen zentral ab und werden entfernt. Podpfswvwl Aex Ab Iord Frässpäne werden per Luftabsaugung abgeführt, wodurch der Arbeitsbereich außergewöhnlich sauber bleibt. So leise, dass Sie sich neben der arbeitenden Maschine unterhalten können.

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Prsdpfxeu Uh T Ds Ab Ied Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change!

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, EN: KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Year of manufacture: 1996 Krüsi CM40, comprising the following components: - Circular saw (cross-cut saw) - Log house milling unit horizontal and vertical - Groove milling units (horizontal) - Boring unit - Infeed table 6m - Outfeed table 6m KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund, AR Year of manufacture: 1996 CE-marked Condition: Good, technically inspected and cleaned / ready for operation Operating Principle: Processing of timber for chalet / log house construction Beams can be machined in a single operation: - Cross-cutting - Horizontal and vertical milling of tenons / grooves in a single clamping - Drilling - Milling front grooves Workpiece: - Max. cutting height: 200 mm - Max. cutting width: 250 mm Robust welded construction. Machine (horizontal and vertical milling units) with 4 special milling motors, Hardened and ground guides for highest machining accuracy. Carriage guidance by dust-protected, preloaded, ball-bearing rollers. Working area up to 200 x 250 mm. Fully operational with contactor control, Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, Central connection for customer-provided chip extraction system, with 2 excenter clamps, Without milling tools (profile cutters). Hydropneumatic horizontal and vertical feed, electrically controlled, together with spindle motor activation. Rapid traverse and feed continuously adjustable. Completely wired and installed, including air maintenance unit. Timbers thicker than 14 cm must be machined in two clampings. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog measurement display Saw blade Ø max. / bore ø 400 / 30 mm Tungsten carbide-tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2.2 2. CM Milling Unit (Log House Unit): Hydropneumatic feed Spindle adjustment with digital readout Horizontal milling unit Cutter Ø 180 mm Maximum cutter width 130 mm For cutter widths over 60 mm use only alloy cutters with indexable inserts 2 hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed Rapid traverse and working feed continuously adjustable 3. Drilling unit: Manual feed Spindle adjustment with analog display Drill holder collet chuck ER 25 Pjdpfx Absvfv Tfo Ierd Max. clamping Ø 16 mm Max. drill Ø 32 mm Motor min-1 1450, kW 1.8 4. Planing/milling unit: Hydropneumatic feed Spindle adjustment with digital display Max. cutter Ø 230 mm Max. cutter width 60 mm Motor min-1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatics: Required operating pressure min/max MPa (bar): 0.7/1 (7/10) Air consumption Nm3/h: 8 Electrical equipment: Operating voltage V / Hz: 380, 50 Rated power kW: 8.8–15.8 depending on version Customer-side main fuse: A 3 x 25 tr