Beli Ruchser bekas (15)

Kondisi: baru, en--Fitting storage yes Working width 3000 (3500) mm Swiveling yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer's description: Pos. 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver, length 3000 mm, width 1400 mm, work platform inclination Ijdpfx Abjt Tq Aas Iea adjustable manually. Usable width 2500 mm Receptacle for fitting shear or fitting punch. 10 swiveling supports for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/central handle position and any handle height for pre-drilled sashes, color size detection for the fittings. Support height can be set to 50 or 60 mm at a stop as required. RU-SH, special screwdriver with pneumatic depth control, mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic shut-off of the filler container manual feed for a second screw length at the special screwdriver, accessories. RA-8, turret stop for 8 screw levels, mounted on the carriage. RA-4 lateral support rail, manually adjustable in depth to the left and right, each with a 4-position turret stop. PSF - pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, glide or brush strips are required as support. Pos. 1.1 Article 6315 RU-BM-... configured for fitting according to customer specification Pos. 1.2 Article 0500000 Bracket matched to customer punch/ shear. For mounting a customer-supplied fitting punch or fitting shear (third-party brand) on the sash assembly table. Please specify manufacturer when ordering!!! ----- Price RU-BM-3000 as described above ex works: on request! ----- Fitting storage options for RU-BM-3000: ----- Version fitting storage fixed-mounted: Price EUR 4,409.00 Article 0630000 RU-BL-30/30 fitting storage fixed-mounted mounted above the sash assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, separated by dividers. Version fitting storage free-standing: Price EUR 5,291.00 Article 0710000 RU-SBL3000/30 fitting storage free-standing, Length 3100 mm, depth 1250 mm, height 2050 mm, frame at the front without supports, 30 compartments, in a row of 10 each, separated by dividers and a continuous top shelf, compartment size: width 280 mm, height 150 mm. 4 pcs. angled supports for corner deflections: Price EUR 614.00 Leg length 120x120 mm; inclination approx. 3° The front edge of the angle is bent upwards by 5 mm to prevent accidental unloading. 2 pieces left and 2 pieces right, mounted under the first shelf of the fitting storage. ----- Additional price for RU-BM-3500 ----- Article 0610300 RU-BM-3500 sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver, length 3500 mm, width 1400 mm, platform inclination manually adjustable, working width approx. 3000 mm Additional price RU-BM 3500 compared to RU-BM 3000: 2,831.00 EUR Fitting storage for RU-BM-3500 (only available free-standing): Price EUR ...

Tahun pembuatan: 2013, Kondisi: bekas, de-01 Isdpfx Ajxykvgsb Iea

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Ruchser roller conveyor for windows with 90° rotary device, left/right, length 4400mm. Electrically driven accumulating rollers with 2 parallel, pneumatically tiltable sections adjustable from vertical to 7°; outer side up to 7° vertical, inner side. Sections are 1900 mm high with rubber roller strips. Between the rubber strips are stainless steel sheets recessed by 2 mm to serve as gliding surfaces with clip holders. Infeed and outfeed equipped with edge-protection rollers, up to 3000mm high, designed as rubber rollers. Infeed section: 2000 mm; outfeed section: 4000 mm with driven accumulating rollers. Control system and operator panel mounted on freely adjustable stand. Iedpfx Abjlpcc Ij Ioa

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Meja perakitan bekas yang ringan dari Ruchser. Kami menggunakannya untuk merakit jendela dan pintu Schüco. Kami menjualnya karena produksi kami telah dihentikan. Ijdpfxow Nyk Ts Ab Ija

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A Ruchser T-connector assembly device is available for the precise and time-saving installation of T-connectors in window or door profiles. Usable length: 6000 mm, maximum mullion width: 250 mm, profile supports: 6, clamps: 4, stop latches: 4, working height range: 950 mm–1100 mm, machine dimensions (L/W/H): approx. 6450 mm/1200 mm/1750 mm. Documentation is available. On-site inspection is possible. Isdpfx Asw Edpyob Ioa

Kondisi: sangat baik (bekas), Roller conveyors available in lengths of 5000 mm and 6000 mm, width 600 mm, equipped with either felt or roller beds for staging. Multiple units available! Please inquire. Iodpfjmt D Raex Ab Ioa

Kondisi: baru, Number of motors: 2 units Working length: 2,650 mm Control: manual Ruchser RU-GLS-ED 45° Glass Beading Saw ----- Designed for paired cutting of glass beads The RU-GLS-ED45° Double Glass Beading Saw is manually adjustable to the desired size. The machine is designed for the paired cutting of glass beads at a cutting angle of 45° and is equipped with one fixed and one movable saw unit. The manual length adjustment is fitted with an electronic digital display. Cutting lengths from 150 mm to 2,650 mm can be processed. During cutting, the glass beads are clamped from above and from the front with a pneumatic clamping device to prevent tilting. Operation is via safety two-hand control. Saw blade diameter: 250 mm, length: 3,700 mm, width: 700 mm, voltage: 400 V. Item 1: RU-GLS-ED45° Double Glass Beading Saw ----- with manual dimension adjustment, for paired cutting of glass beads, cutting angle 45°. Manual length adjustment with electronic digital display, cutting lengths from 150 to 2,650 mm. Pneumatic clamping from above and front. Safety two-hand operation, saw blade diameter 250 mm, length 3,700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping extra. Options and Surcharges: ----- Item 1.1: Shim set for rebated glass beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after examining the glass beads. Depending on the number of bead types used, multiple shim sets may be required. To determine the exact quantity required, we need profile drawings of the glass beads to be used before order confirmation. Surcharge: on request, after receipt of your bead drawings Item 1.2: Fixture for measuring gauge transfer for RU-GL to transfer the measured length to the saw, with pneumatic installation. Surcharge: 611.00 EUR Item 1.3: Measuring gauge for glass beads, total length 2,550 mm, max. measuring length approx. 2,450 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 478.00 EUR Item 1.4: Measuring gauge for glass beads, total length 1,500 mm, max. measuring length approx. 1,430 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 428.00 EUR Iodpfoxmk Dqex Ab Isa Item 1.5: Operating time switch for independent extraction Adjustable from 5 sec. to 3 hours. With every sawing operation, extraction runs automatically for the pre-set time. If another cut is made during this period, the timer resets. Surcharge: 702.00 EUR Item 1.6: 1 set of carbide saw blades for RU-GLS-P45 and RU-GLS-ED45°, D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 piece saw blade L6444 (right) and L6443 (left), special 43° grind. Surcharge: 576.00 EUR ----- All prices in EUR, net, plus VAT. (Technical information according to manufacturer, without guarantee!)

Kondisi: baru, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your benefits: - Corner joints are completely closed - No open glazing bead joints - No color discrepancies during painting - Glazing bead frames are easy to allocate Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle guide, clamping fixture from above and front Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Joining Machine 2P with the optional mobile work table (see details under additional charges) Iedpfx Abevnh T Nj Ija Additional Charges: ----- Mobile Work Table Height-adjustable from 700 – 1000 mm, 2 removable support beams, 1000 mm long, 2 swiveling and sliding support beams 1000 mm, support beams covered with felt, 4 swivel casters, 2 of which with locking mechanism. ----- Additional charge: 992.00 Euro net Staples: Packages 15 mm staples (pack of 2,000 pcs.): Price 21.00 Euro 12 mm staples (pack of 3,000 pcs.): Price 31.00 Euro 10 mm staples (pack of 3,000 pcs.): Price 31.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (technical data according to manufacturer – no liability assumed!)

Kondisi: bekas, Tahun pembuatan: 2023, Mounting parts storage Working width: mm Swiveling: yes Ruchser final assembly line for windows and doors made of wood and wood-aluminum ----- Current new price approx. €270,000. The system has been dismantled and is in storage. Comprising the following: ----- Item 1: Ruchser RU-FKW1600/50-110 with accessories, sash collection trolleys, 11 units Item 2: Ruchser RU-KW-2000S, single-sided collection trolleys, 4 units Item 3: Ruchser RU-RFW-SB200, frame and door leaf rack trolleys, 3 units Item 4: Ruchser RU-MKS-1.4 with accessories, assembly tilting table, 1 unit Item 6: Ruchser RU-DH-F4 double spool trolley for 4 sealing rolls, 1 unit Item 7: Ruchser RU-CBM 3000 work table, 1 unit Sash fitting center RU-BM 3000 with LED pick-by-light system RU-SBL3600/40 free-standing fitting parts storage, RU-CSA-SMB aluminum bracket screw machine with automatic screw feeding and manual feeding of the aluminum brackets Item 8: Ruchser RU-FLW-H-100/16 sash storage trolley, 1 unit Item 9: Ruchser RU-ARFW-S, wood-aluminum frame rack trolley, 1 unit Item 10: Ruchser RU-MKS-1.4 with accessories, assembly tilting table with turning device, 1 unit Item 11: RU-RBA roller conveyor right, lowerable by foot pedal, without integration into the system Item 12: Ruchser RU-RFH-1500/140R/2800 frame rack trolley with accessories, 1 unit Item 13: Ruchser RU-S2H assembly lift station with accessories, 1 unit Item 14: Ruchser RU-VGP4-WL glazing and inspection press with 90-degree left-hand turning device, with accessories, 1 unit Item 20: Ruchser RU-MK-HS-2.8-7 assembly tilting table for lift-and-slide doors with accessories, 1 unit Isdpfxexpn T Ij Ab Isa Item 22: Ruchser RU-RSG/90, 1 pair of rolling stands for transporting large elements, 1 unit Item 25: Crane system 18 x 8 m, 1 unit Item 26: Double supports for suspending crane systems, 4 units Transport of large elements Item 27: Electric chain hoist, 1 unit Item 28: Ruchser RU-VG2-PD-200 glazing lifting device, 2 units Item 29: Crane system 12 x 8 m, 1 unit Item 30: Double supports for suspending crane systems, 3 units Item 31: Electric chain hoist, 1 unit Item 32: Ruchser RU-VG2-PD-300 glazing lifting device with accessories, 1 unit Detailed description of each item attached. More information on request! All information as per manufacturer, no guarantee! Subject to errors.

Kondisi: baru, Staple length, mm Staple width (crown width), mm Impact energy, Nm Painting aid for simultaneous coating of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. One staple is placed at each of the four corners of the glazing bead frame. Positioning is done diagonally so that the staples protrude approximately 35 mm from the wood. When pressed into the sash frame, a clamping effect is created. For painting, the glazing bead frame is positioned approx. 20 mm in front of the sash. After drying or before sash assembly, the glazing bead frame is pressed flush into the sash and removed again only before glazing. The staples can then be manually pulled out. Stand frame with support table, vertically 85°, inclination adjustable. 2 spacer frames for different glazing bead thicknesses, operation via foot pedal. Price on request plus packaging and shipping Option at extra charge: Box of staples 26 x 50 mm each, 4,300 pieces EUR 74.00 Recordings of the painting aid can be found at the end of the adjacent video! (Technical data as per manufacturer – no liability accepted!) Iedpfx Abexpi Efo Isa

Kondisi: baru, Working length 2750 mm Working height 2500 mm Table lifting stroke 300–1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical worktable with lifting mechanism and tilting device. Especially suitable for glazing and double-sided sealing of wooden windows. Features: Contact surfaces covered with felt Infinitely adjustable pneumatic lifting mechanism, lift from 300 mm to 1000 mm, based on conveyor roller height Tilting device for double-sided sealing, with roller conveyor 150 mm roller length 2 pneumatic clamps for securing the window in the tilting device Design with special tilting device allowing the window, set up on the roller conveyor, to be pushed through while the tilting unit is engaged (closed) Alternative/optional equipment available on request! Item 1.0: Article no.: 100000 RU-SW3-90° Vertical Worktable for wooden windows, with tilting device for glazing and double-sided sealing Angle length 1970 mm, opening angle 90°, max. working width 2750 mm, total length 3050 mm, total width 780 mm, contact height 1600 mm, contact surface covered with felt; on either the left OR right side, one roller as edge protection for elements up to 2500 mm height. Pneumatic lifting mechanism from 300 – 1000 mm. Installation area as roller conveyor with steel rollers, roller length and spacing 200 mm. ----- Total price for this configuration: on request! ----- Options at extra cost: Item 1.1: Article no.: 5202 EUR 710.00 each Contact part with rubber rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Isdpfxexmk D Ro Ab Isa Item 1.2: Article no.: 7081 EUR 404.00 each Steel angle with felt covering, mounted above the roller rails for RU-SW3-90° These prevent the windows from "rattling" when pushed. The additional rails are installed above all roller rails of the RU-S2. Item 1.3: Article no.: 5056 EUR 129.00 each RU-AK-6 storage box 1000x120 mm, 6 compartments, for hooking into the roller conveyor ----- Total price for this configuration: on request! Ex works plus packaging and shipping, plus VAT. PDF brochure attached. (Technical data according to manufacturer – without guarantee!)

Kondisi: baru, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glass Bead Saw on Sliding Work Table Designed for cutting pairs of glazing beads on the sliding work table. The RU-GL glass bead saw is mounted on a sliding work table with a scanning and clamping unit for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw manually movable on a carriage. Pneumatic clamping from above and from the side, two-hand safety operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt top, total length with side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sashes. Item 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 Iedsxmkz Nepfx Ab Ioa ----- For glazing beads up to 30 x 70 mm (W x H)!!!, mounted on sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw manually movable on carriage. Pneumatic clamping from above and from the side, two-hand safety operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt top, total length with side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for sash positioning. ----- Base price as specified above: on request! ----- Plus packaging and shipping, as well as current material surcharge of 6% of the total price Options with surcharge: ----- Item 1.1 1 set of carbide saw blades for RU-GL glass bead saw D = 200 mm, 64 teeth, consisting of 1 left (L1233) and 1 right (L1085) saw blade, with special 43° grind. Surcharge: 421.00 Euro Item 1.2 Adapter for scanning gauge for RU-GL for transferring scan dimensions to the saw with pneumatic installation. Surcharge: 611.00 Euro Item 1.3 Scanning gauge for glazing beads, total length 2550 mm, max. measured length approx. 2450 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length. Surcharge: 478.00 Euro Item 1.4 Scanning gauge for glazing beads, total length 1500 mm, max. measured length approx. 1430 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length. Surcharge: 428.00 Euro Item 1.5 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after review of glazing beads. Depending on the number of glazing bead types used, several spacer sets may be required. To determine the required quantity, please provide profile drawings of the glazing beads to be used prior to order confirmation. Surcharge: on request, following submission of your glazing bead drawings Item 1.6 Operating time switch system for independent extraction. Adjustable from 5 seconds to 3 hours. For each sawing operation, suction is automatically activated for the set time. If another cut is made during the suction time, the timer resets and starts again. Surcharge: 702.00 Euro ----- Total price ...

Kondisi: bekas, Panjang kerja 2000 mm Lebar kerja 1800 mm Ijdpfx Aexmk Dkeb Iea Lebar rol 200 mm 4 buah jalur rol ukuran 2000 x 200 x 1800 mm untuk pemrosesan dalam dan luar

Kondisi: bekas, Dimensions (L x W), mm Weight approx. 90 kg Adjustable height (yes/no): yes Lift: 300 - 800 mm Worktable support surface: 1,700 x 1,500 mm Maximum table width: 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP Turn-Tip Table ----- Support surface: 1,700 x 1,500 mm, maximum table width (swung out): 3,800 mm, pneumatically tiltable, cut-out for window rebate, equipped with 6 storage bins each with 2 compartments, extendable lower sections for width extension, with 2 support legs and 2 flat clamping cylinders, lift mechanism from 300 - 800 mm, roller conveyor as a setup surface, foldable. Payload capacity 130 kg. Travel gear with 4 swivel castors with locking device (RU-4SSP) 2 stops for final inspection and sealing Sash assembly jig with tool shelf and adjustable stop for tilting position for RU-4-SSP Holder for drilling machine, screwdriver gun, etc., with screwdriver holster Travel gear with flanged track rollers RU-DKFA and RU-4SSP 3 double metre travel rail for drive unit 25 x 10 mm ----- Price for the above-mentioned machine upon request! Plus packaging and shipping ----- (Technical data as per manufacturer's specifications – subject to change without notice!) Isdpfx Ajvu Hfdeb Ioa

Kondisi: baru, Complete assembly line consisting of: Item 1.0 / RU-CBM 4000 Work Table with an extended guide rail by 500mm for the additional installation of an aluminium bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD, equipped with the RU-SH special screwdriver, support table. Length: 4000 mm, Width: 1400 mm, manual adjustment of the working platform inclination. Holder for hardware shears or hardware punch. 16 swiveling counter supports for suspending sashes, fully pneumatically foldable to allow unobstructed movement of sashes on the table surface. Equipment for measuring the hardware length on the sash to ensure consistent and variable/central gearbox positioning for already drilled sashes, color-based size detection of the fittings. RU-SH, special screwdriver with pneumatic depth control mounted on running carriage, safety control, pneumatic height adjustment, screw feeding device with automatic shut-off of the fill container (manual insertion for a second screw length at the special screwdriver available upon request). RA-8, 8-position turret stop mounted on running carriage for 8 screw positions. RA-4, 4-position turret stop for four different sash widths mounted on swivel table. Sash size scanning, pneumatically operated, scanning range up to 2500 mm with simultaneous clamping of the measurement device. PSF – Pneumatic clamping device for sashes. Working height adjustable from 900–1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic pivoting device for the work surface with foot valve. Item 1.2 / 0500000 Mounting bracket tailored to customer's punch/shear. For installation of a hardware punch or shear (third-party make) provided by the customer at the sash assembly table. Please specify manufacturer when ordering!!! Item 1.3 / 5597-7 Travelling device for RU-CBM on semi-circular rails. The running rollers are mounted left and right on the base frame of the table. Item 1.4 / 6354-6 3 double meters of semi-circular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 hardware storage, free-standing, Length: 3100 mm, Depth: 1250 mm, Height: 2200 mm, Frame at the front without supports, 40 compartments, arranged in one row of 10 each separated by dividing walls, and one continuous top shelf, Compartment dimensions: Width 280 mm, Height 150 mm. Item 2 RU-CSA-SMB Aluminium Bracket Screwdriving Machine with automatic screw feeding and manual feeding of aluminium brackets from a mobile box with pneumatic positioning device, screwdriver with depth stop and 4-position turret stop. Pneumatic adjustment in Y-direction against two 6-position turret stops. Supply container for manual feed of rotary brackets or clip holders in square format 18.5 x 18.5. The bracket is manually pushed into a channel in the box and positioned in front of the screwdriver tip via a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in Y-direction max. 120 mm. Item 3 RU-S48-A6-350 Column-Mounted Slewing Crane for chain hoist, with 6 m aluminium jib Version with free-standing column, light-running jib, and trolley for slewing and cat travel manual operation by pushing/pulling the load. Reach: 6 m Overall height: 4.461 m Underside of jib: 3.722 m (top edge 3.9 m) Isdsd Ih Hujpfx Ab Isa Slewing range max. 270° Steel construction painted to RAL 7035 The base plate is to be anchored on site to the factory floor with ...