Beli Kx 019-4 bekas (61.444)

Kondisi: bekas, jarak tempuh: 856.127 km, daya: 367 kW (498,98 hp), pendaftaran pertama: 02/2019, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pendingin udara,

Kondisi: bekas, jarak tempuh: 573.030 km, daya: 355 kW (482,67 hp), pendaftaran pertama: 04/2019, jenis bahan bakar: diesel, berat keseluruhan: 19.500 kg, konfigurasi gandar: 2 gandar, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: mengalami kecelakaan, pendingin udara,

Kondisi: bekas, Diameter various Quantity 40x Ppjdpoww Nblefx Abujl Holder BT 40

Kondisi: sangat baik (bekas), Miwe Condo 120x80 bakkerijkast met volledig onderhoud Ppedpfx Aboh Rwf Ssuel

Kondisi: bekas,

Kondisi: baru, Tahun pembuatan: 2020, Model: KPZ-2 Type: Enclosed Working Dimensions: 900 mm W x 1300 mm H x 900 mm D External Dimensions: 980 mm W x 2100 mm H x 1600 mm D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50–60 Hz Filter: Polyester Number of Filters: 3 Filter Surface Area: 22.5 m² Ppedeb Al Sbspfx Abuol Fan: Aluminium Fan Noise Level: 74 dBa Air Consumption: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 438 kg, Spicer Powershift Getriebe Serie 24000 Modell 3019FMHR24341-110 Ppedpfx Asv Eaqbjbusl MHR MODELL Die MHR-Serie ist eine integrierte Getriebe- und Wandler-Einheit, die vom Motor getrennt montiert wird. Diese Bauweise reduziert den Bedarf an externen Leitungen. Dieses 3-Gang-Powershift-Getriebe ist für anspruchsvolle Einsätze konzipiert, darunter Gabelstapler, Geländestapler, Radlader, Geländekrane sowie weitere Maschinen für Bergbau, Bauwesen und Industrie. Eingangsleistung: 97 bis 120 kW Maximale Eingabedrehzahl (RPM): 3100 Turbinenstillstandsmoment: 980 Nm Industrie / 1115 Nm Nutzfahrzeuge PDF-Broschüre Servicehandbuch EN Versandgewicht: 438 kg 1 Stück auf Lager

Kondisi: bekas, jarak tempuh: 10.558 km, daya: 3 kW (4,08 hp), tipe perpindahan gigi: lain, jenis bahan bakar: listrik, warna: merah, berat keseluruhan: 1.074 kg, berat kosong: 629 kg, jumlah tempat duduk: 1, pendaftaran pertama: 02/2011, kelas emisi: tidak ada, suspensi: lain, Tahun pembuatan: 2010, kabin pengemudi: lain, bahan bakar: listrik, Perlengkapan: kopling trailer,

Kondisi: bekas, jarak tempuh: 11.932 km, tipe perpindahan gigi: lain, jenis bahan bakar: listrik, warna: merah, berat keseluruhan: 1.330 kg, berat kosong: 700 kg, berat muatan maksimum: 150 kg, jumlah tempat duduk: 1, pendaftaran pertama: 12/2016, kelas emisi: tidak ada, suspensi: lain, Tahun pembuatan: 2016, jam operasional: 11.932 h, kabin pengemudi: lain, bahan bakar: listrik,

Kondisi: bekas, jarak tempuh: 5.208 km, tipe perpindahan gigi: lain, jenis bahan bakar: listrik, warna: merah, pendaftaran pertama: 07/2015, kelas emisi: tidak ada, suspensi: lain, Tahun pembuatan: 2015, jam operasional: 5.208 h, kabin pengemudi: lain, bahan bakar: listrik,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fritsch Rollfix 600M-A1.6Kx1.4K-EN mesin penggiling adonan Gulungan otomatis Kontrol digital Penabur tepung Pjdpfx Asxqprbobuspl Lebar ban berjalan: 650 mm Bukaan rol: 0,3 – 45 mm Kecepatan penggilingan: 93,3 cm/detik Belt dan scraper baru Tahun pembuatan: 2016

Kondisi: bekas, jarak tempuh: 22.257 km, daya: 141 kW (191,71 hp), pendaftaran pertama: 05/1982, jenis bahan bakar: diesel, berat kosong: 8.690 kg, berat muatan maksimum: 3.310 kg, berat keseluruhan: 12.000 kg, konfigurasi gandar: 4x4, inspeksi berikutnya (TÜV): 09/2025, bahan bakar: diesel, warna: merah, kabin pengemudi: lain, tipe perpindahan gigi: lain, kelas emisi: tidak ada, suspensi: lain, panjang total: 7.600 mm, Tahun pembuatan: 1982, tinggi konstruksi: 3.100 mm, Perlengkapan: kopling trailer, penggerak semua roda, winch kabel,

Kondisi: hampir baru (bekas), Treif broodsnijmachine 4-24MM In goede werkende staat. Voor meer informatie graag een aanvraag sturen. Pjdpfx Aoumpg Rsbujpl

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual pompa vakum Edwards E2M80 rekondisi (P/N: A36501934). Beberapa unit tersedia; harga tertera adalah per unit! Pengiriman ke seluruh dunia tersedia – silakan hubungi kami untuk penawaran. Jika Anda membutuhkan pompa vakum, aksesori, atau peralatan terkait vakum lainnya, jangan ragu untuk menghubungi kami. Kami siap membantu dalam pencarian, saran teknis, atau solusi kustom. Ppedpfxsxlq Sro Abusl

Kondisi: bekas, Tahun pembuatan: 2016, Used Machine Cross Sanding Automatic Machine Year of Manufacture: 2016 Product Advantages Beneath every perfectly lacquered, stained, or oiled wooden surface lies a flawlessly sanded substrate! Felder sanding machines stand out for their robust construction, cutting-edge machine technology, and maximum productivity. Key Highlights at a Glance: • Sanding width: 1350 mm • Sanding height: 3–170 mm • Combined superfinish unit • Touch-screen control for operation • The Felder operating concept ensures maximum process and work safety Your Advantages at a Glance: Time Savings • Motorized adjustment of the contact roller in increments of 0.01 mm from the control panel • Innovative unit arrangement for pre-sanding and fine sanding of veneered workpieces • Brushing units at machine outfeed • Lacquer sanding as optional upgrade Convenience • Fixed infeed table height (machine upper section adjusts) • Touch screen control with clear visual indicators and program memory • Machine data acquisition for abrasive belt wear and much more • Tool-free sanding belt replacement • Large fold-down table extensions for the heaviest workpieces Flexibility • Units for calibration, fine sanding, and lacquer sanding • Variable feed speed up to 20 m/min via inverter Innovation • Electronically segmented sanding pad with silicone technology for minimal air consumption • Combined superfinish unit incl. chevron glide belt to compensate for oscillation marks Quality • Heavy-duty machine construction • Durable machine components Standard Equipment Control System: finish 1350 classic Control unit with 7" touch color display, 100 program memory slots, maintenance intervals Direct text error messages Ammeter for load monitoring Feed Table Fixed infeed height—stationary table, 900 mm; electric height adjustment of units incl. fine adjustment via control panel; infinitely variable feed speed from 2.8–20 m/min. Adjustable by inverter from the control panel; hand protection and workpiece overthickness protection; workpiece detection sensor with 25 sensors; 55 mm segment width Endless belt conveyor with honeycomb structure Automatic feed belt centering Cross Sanding Unit: finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron glide belt between sanding pads—sanding belt for homogeneous finishes without oscillation marks Variable pressure regulation on operator side Sanding belt oscillation: electro-pneumatic Electronic sanding belt tracking safety 1 motor with 7.5 kW (10 HP) Star-delta start Cleaning blower with timer control Cutting speed: 12 m/s Sanding belt: 140 x 4560 mm Combined Superfinish Unit 1350C: Rubberized, grooved contact roller with 85–90° Shore hardness and 142 mm diameter Ppsdpfxjw I Uv Uo Abusl Electromotive position-controlled grit compensation Segmented, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure regulation on operator side Chevron glide belt between sanding pads and sanding belt for homogeneous finishes without oscillation marks Mechanically pre-tensioned rubber pressure rollers Sanding belt oscillation: electro-pneumatic Electronic sanding belt tracking safety

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: Ppedpfx Absd Tbbdsuol - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Ppsdpfx Abofdkb Touel - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Ppodpjd Tqalefx Abuol The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Psdoguk A Hepfx Abuspl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time Ppjdpfx Aofdkb Usbuol - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. Ppjdpfx Absguk Dkeuel The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Pjdpsfdkbhjfx Abujpl - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version Psdpeguk Dvjfx Abujpl - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 244,5 kW (332,43 hp), jenis pendinginan: udara, berat keseluruhan: 1.970 kg, lebar total: 1.660 mm, panjang total: 3.540 mm, tinggi total: 2.230 mm, masa garansi: 6 bulan, Chiller pendingin udara HiRef TSX244CS 244,5 kW Kapasitas pendinginan: 244,5 kW / 69,52 ton (12/7 — 35°C) Tahun pembuatan: 2019 Opsi: Modul hidrolik Sirkuit refrigeran: 2 unit Penukar panas: tipe pelat Kondensor: Tembaga / Aluminium Kompresor: 2 unit Danfoss DSH295A4AAB (scroll) + 2 unit Danfoss DSH240A4AAB (scroll) Jenis refrigeran: R410A Jumlah kipas: 6 unit (kipas EC) Modul hidrolik: 2 unit pompa air EBARA 3MHS/I 50-125/4 SCA IE3, tangki buffer 600 l Dimensi: 3,54x1,66x2,23 m Berat: 1970 kg Ppedpexbyxtofx Abuel Jam kerja: 412/412/412/412 jam Kondisi: Sangat baik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 5.700 mm, lebar pita gergaji: 41 mm, tinggi total: 1.720 mm, panjang total: 2.600 mm, lebar total: 2.400 mm, panjang pemakanan sumbu X: 600 mm, Rentang pemotongan baja bulat pada 90°: 400 mm, lebar pemotongan (maks.): 400 mm, tinggi meja: 700 mm, berat keseluruhan: 2.200 kg, ketinggian potong (maks.): 400 mm, Fully hydraulic high-performance bandsaw machine, heavy-duty design, with a horizontally and parallel-moving saw band, suitable for cutting profiles, pipes, and solid materials of all grades— including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw blades. The saw unit is manufactured from solid polymer concrete, ensuring maximum running smoothness and extended blade service life. Guidance of the saw unit is achieved via two vertical square columns (twin-column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned carbide blade guides. Material clamping by two horizontal frame vices. Material feed through an integrated, non-driven roller conveyor with twelve transport rollers, enabling effortless transport of short offcuts. Year of manufacture: 2004 Cutting range (round): 400 mm Cutting range (square): 400 x 400 mm Automatic feed length: 600 mm Multiple automatic feed length: 99,999 mm Cutting speed: infinitely variable 20–130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw blade dimensions: 5700 x 41 x 1.3 mm Shortest cutting length in automatic mode: 6 mm Minimum remnant length in automatic mode: 80 mm Voltage: 380V / 50 Hz Dimensions (LxWxH): 2600 x 2400 x 1720 mm Weight: 2,200 kg - Coolant device - Full enclosure - CNC control - Standstill monitoring - Band deviation monitoring - Side guide rollers - Height measurement system - Light barrier Pjdpfxeupvrxo Abuepl