Beli Laboratorium bekas (1.049)

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), pl-hu-001 Kdsdpfx Aasxmhfrsyjw

Kondisi: baik (bekas), EA Elektro Automatik Model: EA-EL 9080-170 B Electronic DC Load, USB / Analog / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical Specifications: Mains Voltage: 90...264 V AC Mains Connection Type: Socket Mains Frequency: 45...65 Hz Line Fuse: T 6.3 Power Consumption: Max. 90 W Leakage Current: < 3.5 mA DC Input Input Voltage: 80 V Input Power: 2400 W Input Current: 170 A Overvoltage Protection Range: 0...1.03 * UNominal Overcurrent Protection Range: 0...1.1 * INominal Overpower Protection Range: 0...1.1 * PMax Max. Permissible Input Voltage: 88 V Min. Input Voltage for IMax: Approx. 2.2 V Temperature Coefficient of Set Values Δ / K Current / Voltage: 30 ppm Voltage Control Setting Range: 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C): ≤ 0.1% of UNominal Display Accuracy: ≤ 0.1% of UNominal Remote Sense Compensation: Max. 5% of UNominal Current Control Setting Range: 0...173.4 A Stability at ΔU < 0.1% of INominal Accuracy (at 23 ± 5°C): ≤ 0.2% of INominal Display Accuracy: ≤0.1% of INominal Rise Time 10...90% of INominal: < 23 μs Fall Time 90...10% of INominal: < 46 μs Power Control Setting Range: 0…2428 W Kdedpfjuv Eudox Aayjw Accuracy (at 23 ± 5°C): < 0.5% of PMax Display Accuracy: ≤ 0.2% of PMax Resistance Control Setting Range: 0.04…15.3 Ω Accuracy (at 23 ± 5°C): ≤1% of resistance full scale + 0.3% of INominal Display Accuracy: Included within set value accuracy EL 9080-170 B: Analog Interface: Setpoint Inputs: U, I, P, R Actual Value Outputs: U, I Control Signals: DC on/off, Remote Control on/off, R-mode on/off Status Signals: CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic Isolation to Device: Max. 400 V DC Sampling Rate Setpoint Inputs: 500 Hz Insulation: Input (DC) to Case DC Minus: Permanent max. ±400 V DC Plus: Permanent max. ±400 V + max. input voltage Input (AC) to Input (DC): Max. 2500 V, short-term Climatic Conditions: Cooling Type: Temperature-controlled fan Ambient Temperature: 0...50 °C Storage Temperature: -20...70 °C Digital Interfaces: Installed: 1x USB-B for communication, 1x USB-A for functions, 1x Master-Slave bus Slot for digital modules (optional): CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, EtherCAT Galvanic Isolation to Device: Max. 400 V DC Connections: Rear: Share-Bus, DC input, AC input, sense, analog interface, USB-B, master-slave bus, interface module slot Front: USB-A Dimensions: Chassis (W x H x D): 19'' x 2U x 464 mm Total (W x H x D): 483 mm x 88 mm x 538 mm Standards: EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight: ≈ 11 kg Condition: Used Scope of Delivery: (See photo) (Specifications and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Spesifikasi Model Ilmvac: LVS 105 T-10 ef Kapasitas Udara Bebas, l/menit 60/50Hz: 20 / 17 Ksdpfoxx Na Usx Aaysdw Tekanan Vakum Maksimal, torr: 1.5 Vakum Maksimum, in. Hg: 29.86 Selang yang dibutuhkan, diameter dalam (mm): 1/4 (7) Berat, lbs (kg): 21 (9,5) Daya (Kw): 0,83 Tegangan / Frekuensi Masuk: 90V – 260V, 50/60 Hz Kondisi kerja baik. Silakan cek juga daftar produk kami lainnya.

Kondisi: bekas, Digunakan pengering rak tempat tidur fluida laboratorium berbahan baja tahan karat dari Glatt model GPCG-1. Volume kerja ruang pengering hingga 4,5 l. Tekanan operasi 0,79 bar. Mesin dilengkapi dua kerucut baja tahan karat – satu untuk proses pelapisan, satu lagi untuk pengeringan. Kerucut pelapisan juga dilengkapi dengan 4 saringan baja tahan karat. Nozel tidak termasuk. Daya listrik pemanas 4 kW. Rentang suhu kerja dari 10 hingga 140 °C. Pengering dilengkapi kipas sentrifugal yang digerakkan motor listrik 2,2 kW, 2850 rpm, 220-230/380-400 V, 50 Hz. Tekanan udara terkompresi – 6 bar. Kjdpfxsxt Eius Aayjdw

Kondisi: bekas, Daftar ini untuk Labcold Blood Bank RDBB11601 Kulkas Laboratorium. Unit dalam kondisi kerja penuh dan siap untuk segera dikirim. Kdodpfx Aaexx Awtsyjw

Tahun pembuatan: 2025, Kondisi: baru, The extruder model EX20-25d is designed for laboratory scale applications and achieves a plasticizing capacity of 5 kg/h. This extruder can be used for material development, small batch production, or as a filament extruder. As standard, this extruder model is supplied with a bimetallic barrel and a fully hardened screw for high temperatures (up to 400°C). This allows the processing of abrasive materials, technical plastics, PEEK, metal compounds, ceramics, and fiber-reinforced materials, among others. Available machines can be inspected at our facility in Königswinter. We also realize other machine dimensions—please contact us for further information. Kdedpfxsiv H Eks Aayow

Kondisi: bekas, Micro Balance, Laboratory Scale, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N: 1129453969 Part No.: 18.11.2.1518.756-1 Year of manufacture: 2008 Functions: Weighing, statistics, formulation, density determination, percent weighing, piece counting Maximum capacity: 3.1 g Readability: 0.01 mg Taring range (from ... to): 0 to 3.1 g Fine range maximum capacity: 800 mg Fine range readability: 0.001 mg Repeatability (at nominal load): 6 µg (3 g) Repeatability in fine range (at nominal load): 0.8 µg (0.2 g) Linearity deviation: 10 µg (0.5 g) Corner load deviation (test load): 4 µg (1 g) Sensitivity deviation (test weight): 45 µg (3 g) Sensitivity temperature drift: 0.0001 %/°C Sensitivity stability: 0.0001 %/year Repeatability (at low load): 3 µg (0.2 g) Repeatability, fine range (at low load): 0.2 g (0.5 µg) Linearity deviation: 3 µg (3 g) Corner load deviation (test load): 1.2 µg Sensitivity deviation (test weight): 9 µg (3 g) Minimum sample weight (according to USP): 6 mg Minimum sample weight (according to USP) in fine range: 1 mg Minimum sample weight (U = 1%, k = 2): 0.6 mg Minimum sample weight (U = 1%, k = 2) in fine range: 0.1 mg Stabilization time: 6 s Kedpfewrtbxox Aayjdw Stabilization time in fine range: 10 s Interface update rate: 23 1/s Windshield diameter: 68 mm Usable height inside windshield: 55 mm Weighing pan diameter: 25 mm - LCD touchscreen - Interface: RS232C - Printer type: RS-P42 - Tare function Power adapter: Primary: 100 - 240 V AC, 50/60 Hz; Secondary: 12 V DC, 2.5 A Terminal/Evaluation unit dimensions (L x W x H): 285 x 195 x 80 mm Weighing cell dimensions (L x W x H): 288 x 128 x 114 mm Printer dimensions (L x W x H): 210 x 150 x 90 mm Total weight: approx. 7 kg Good condition.

Kondisi: bekas, GRIESER Model: VPL 3.0 Total mixing chamber volume: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in mixing chamber: 0 to 1.2 bar abs. Pressure in stainless steel double jacket: N/A Critical speed: 1800 rpm Speed range under load: - Paddle mixer: 38–282 rpm - Scraper: 9–90 rpm Rated voltage: 3/PE/50Hz, 400V; L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3 kW Kjdpev E I N Esfx Aayedw Rated current: 5.0 A Main switch: 32 A Fuse protection: 16 A Weight: 250 kg Ex works sale! Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) For further questions we are happy to assist you by phone.

Tahun pembuatan: 2022, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mini Spray Dryer B-290 adalah peralatan laboratorium pilihan Anda untuk proses pengeringan cairan menjadi bubuk secara cepat dan lembut. Fitur unggulan dari Spray Dryer ini meliputi kinerja efisien dengan waktu instalasi yang sangat singkat, mekanisme pembersihan nosel terintegrasi yang efektif, serta tingkat fleksibilitas tinggi berkat variasi geometri silinder yang berbeda. Kdsdpfxoxwdb Do Aaysw

Kondisi: baik (bekas), Mesin Pencuci/Penyuci Desinfeksi Laboratorium Kdsdpomxmlijfx Aaysw Jam operasional, dll.: lihat foto Unit dapat dilihat di gudang saya dengan perjanjian. Muat ataupun pengiriman memungkinkan! Pemeriksaan oleh layanan pelanggan memungkinkan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Dijual mesin uji tekan otomatis merek Controls, model Pilot, tahun produksi 2014, tipe C56C02, no seri 14002524. Kapasitas gaya hingga 3.000 kN. Mesin press ini digunakan di laboratorium jalan. Mesin press dalam kondisi sepenuhnya berfungsi dan terawat, dilengkapi dengan sertifikat kalibrasi terbaru yang diterbitkan oleh OUM di Łódź, sertifikat kalibrasi dengan tanda PCA. Paket penjualan meliputi manual pengguna dan perangkat lunak pada CD. Kedpfx Aaexu Twcsyedw

Kondisi: bekas, de Ksdpfjxv D E Hjx Aayjdw

Kondisi: siap digunakan (bekas), Rotor Beckman Coulter SX4750 Kjdpfxextagbe Aayjdw RPM Maksimal: 3750 680 g Kondisi kerja baik. Silakan lihat juga daftar produk kami yang lain.

Kondisi: sangat baik (bekas), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser Laboratory Stand Dissolver Type: GFD 11 LST Intended use: This machine is designed for mixing powdered solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from low-viscosity to pasty materials. Machine Design: The laboratory stand dissolver essentially consists of the machine stand, lifting device, drive for the mixing tool, telescopic hood with spring-pressure closing, clamping chuck, and control cabinet (not Ex-rated) with controller and compact controller. In the operating position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, serving its purpose according to the application. The mixing tool drive is equipped with variable speed control via frequency converter. The arrangement, power ratings, and speeds of the motors can be found in the attached project drawing. On the compact controller display, the mixing tool speed, mixing time/remaining mixing time, mixing sequences, and other functions can be displayed. Operation Switching on and off is performed using the appropriate buttons on the control cabinet. Raising the mixing tool drive Raising is performed by activating the lifting motor. It operates only while the push-buttons (two-hand safety control UP-UP) are pressed. Releasing the buttons stops the arm at any desired height. Lowering the mixing tool drive To lower the arm, the appropriate buttons (two-hand safety control DOWN-DOWN) must be pressed on the control panel. Mixing tool change The mixing tool shaft features an M8 connection thread. Depending on requirements, the mixing tool (customer-supplied stirring star) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Kdjdpfx Asd Edm Sjayow Mixing tool speed: 25 – 500 rpm via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring star, customer-supplied Operating panel / Display The machine is predominantly operated via the compact PLC controller “Vision 560-T25B.” Safety-related functions, such as main switch disconnection, emergency stop activation, and two-hand operation for opening/closing the mixing chamber, are excluded from this. The operating panel consists of a backlit LCD display and membrane click buttons. The letter-marked buttons are assigned fixed functions, which can be activated at any time regardless of the menu. Once a function is activated, the relevant status appears in the upper right section of the “Operating Display” menu screen. The M up and down buttons allow the user to scroll through the menu pictures. Type: GFD 11 LST Condition: used Scope of delivery: (see picture) (Technical data and specifications may change and are subject to errors!) We will be happy to answer further questions by phone.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, MIELE laboratory glassware washer with DI water connection, liquid dosing, DryPlus & conductivity monitoring • Capacity per cycle, e.g., 128 laboratory bottles • Safety – Wash pressure, spray arm, and conductivity monitoring • 72% reduced water consumption Kdsdpfev Aknrox Aayew • Efficient hot air drying – DryPlus For further technical specifications, please refer to the attached PDF.

Kondisi: bekas, Penawaran ini untuk Kulkas Laboratorium Thermo Fisher Scientific A500PV. Kdsdoxv Dn Ispfx Aayow Unit dalam kondisi kerja penuh dan siap untuk segera dikirim.

Kondisi: sangat baik (bekas), Fitur: RPM Maksimal - 32.000 RCF Maksimal - 175.000 x g Faktor k - 204 Kjdpexqy Umofx Aayodw Jumlah Tabung / Volume / Ukuran / Dimensi: 6 x 38,5 mL 1 x 3,5 inci 25 x 89 mm Kapasitas rotor - 231 mL Kondisi kerja baik. Silakan lihat juga daftar produk kami yang lain.

Kondisi: baik (bekas), EA Elektro Automatik Type: EA-EL 9080-200 EA Elektro-Automatik Electronic Load (2.4KW) 0-80V 0-200A Technical Data: Mains Input: Mains Voltage: 115V/230V switchable Mains Frequency: 50/60Hz Kodpfx Ajuv Ewroaysdw Mains Fuse: T2.5A DC Input: Input Voltage U rated: 0…80V Input Power P rated: 0…2400W, with temperature-dependent derating Continuous Power: 1500W at 20°C ambient Input Current I rated: 0…200A Overvoltage Protection Limit: 1.1 * U rated Maximum Permitted Input Voltage: 100V Voltage Regulation: Setting Range: 0…80V Display Resolution: 100mV Accuracy

Kondisi: bekas, de Kdsdpfx Aaexrt Ntjyow

Kondisi: siap digunakan (bekas), Fitur: Kecepatan maksimum 15.000 rpm (tergantung rotor) Kecepatan minimum 300 rpm RCF Maksimum 21.885 x g (rotor mikroliter) Rentang pengaturan suhu -9°C hingga +40°C Waktu operasi Mode standar: 1 menit - 9 jam 59 menit, tahan = permanen Mode diperpanjang: 1 menit - 99 jam, tahan Kdedpfsxqq R Ssx Aayew Daya listrik 120V, 60Hz, 12A Konsumsi daya 1220W Dimensi (L x P x T) 74 x 66 x 37 cm Berat ~130 kg (~288 lbs) Dilengkapi dengan rotor Heraeus yang dapat disterilkan dengan autoklaf, terlihat pada gambar. Kondisi kerja bagus. Silakan cek daftar produk kami lainnya juga.

Kondisi: sangat baik (bekas), Here we offer a Despatch laboratory oven. Despatch Laboratory Oven + 8” wafer compatible LCC: Maximum temperature 260°C Lockable main switch for disconnecting the control panel to facilitate maintenance Protocol 3 controller with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel chamber with interior seams fully welded on the insulation side to protect the working area from contamination Programmable door lock to prevent the operator from opening the oven door during cycle operation Door interlock switch disables heating when the door is open Recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered to ISO Class 5 (Class 100) standard throughout the entire process cycle Magnehelic gauge monitors pressure drop across the HEPA filter, indicating when filter replacement is required Electric door release for ergonomic operation UL & C-UL listed control panel Modbus communication interface (RS485) for remote monitoring and logging Chamber dimensions: L 350 mm Kdedped Nfq Isfx Aaysw Chamber width: B 350 mm Chamber height: H 350 mm Maximum temperature: 260°C Digital display: Yes Electrical connection: 230 V Overall length: L 830 mm Overall width: B 910 mm Overall height: H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) For further questions, we would be happy to assist you by phone.

Kondisi: sangat baik (bekas), Persiapan Lantai Platform Kdjdpfjxqq I Dox Aaysw Tipe Rotor: Sudut Tetap (Ultrasentrifugasi) Sudut: 20° RPM Maksimum: 50.000 rpm Gaya Maksimum: 312.000 xg k-Factor: 33 (baris luar), 39 (baris dalam) Jumlah Tabung: 13 x 64 mm, 44 x 6,5 mL Tutup & Spacers: 344389 │ 345827 │ 361676 Kapasitas Nominal: 286 mL rMAX: Baris luar: 111,5 mm │ Baris dalam: 96,2 mm rMIN: Baris luar: 80,8 mm │ Baris dalam: 65,7 mm BioSafe: Bio-Enhanced Bahan: Titanium Kondisi sesuai gambar. Silakan lihat juga daftar kami yang lain.

Kondisi: sangat baik (bekas), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply unit from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key Features: - Autoranging (flexible voltage/current combinations up to the maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical Data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A Ksdpfx Aaow S T Rloysdw - Maximum power: 5 kW - Form factor: 19″ rack, 3U - Efficiency: approx. 93 % - Weight: approx. 20 kg Scope of delivery: (see image) - EA-PS 8080-170 3U power supply - Power cord (Specifications and details subject to change and errors!) If you have any further questions, please do not hesitate to contact us by phone.

Kondisi: sangat baik (bekas), SW 41 Ti adalah rotor bucket ayun yang dirancang untuk sentrifugasi hingga enam tabung. Digunakan pada ultracentrifuge preparatif Beckman Coulter kelas H, R, dan S, rotor ini menghasilkan gaya sentrifugal untuk pemisahan dan pemurnian partikel kecil. Aplikasi umumnya meliputi pemisahan RNA, protein, dan partikel subseluler dalam larutan menggunakan teknik sentrifugasi zona kecepatan. Volume sampel per tabung sekitar 0,5 mL, dengan volume gradien sekitar 12,5 mL. Kondisi dan kelengkapan sesuai foto. Kondisi bekerja dengan baik. Silakan cek juga listing kami yang lain. Kjdpfxsxqq Ikj Aayjdw

Kondisi: bekas, Schmidt Laboratory Press MB 10 300 Product Description: For sale is a high-quality laboratory press, Schmidt MB 10 300. Kdedpfx Asxg Hybjaysw The machine is in operational condition and has been well-maintained at all times. Ideal for laboratory applications, research, and precise pressing processes. Technical Highlights: - Pressing force: max. 100 kN - Return force: approx. 43 kN - Operating pressure: approx. 200 bar - Piston diameter: 80 mm, piston rod diameter: 60 mm - Stroke: 300 mm - Heating plates: 300 x 300 mm, electrically heated up to 200°C - Heating output per plate: 3 kW - Closing speed: 23 mm/s, opening speed: 0–25 mm/s manual / 60 mm/s automatic - Hydraulics: Internal gear pump with 63 l/min, drive power 3 kW - Electrical connection: 3 x 400 V, 50 Hz - Control voltage: 24 V Special Features: - 4-column vacuum design for stable guidance - High-quality, ground, parallel heating plates - Separately controllable electronic temperature control with ±2 K accuracy (PT100) - Siemens PLC control with two-hand safety operation - Automatic operation with programmable pressing and heating cycles - Adjustable press stroke with upper and lower limits - Clearly arranged control panel for easy operation - Robust, durable construction with integrated thermal insulation Dimensions and Weight: - Width: 1140 mm - Height with guard door open: 1935 mm - Depth: 1350 mm - Operating height: 1110 mm - Weight: 920 kg Color scheme: - Machine frame: slate grey RAL 7015 - Control cabinet & safety guard: red RAL 2002 - Functional parts: galvanized Condition: used Scope of delivery: (See picture) - Schmidt MB 10 300 laboratory press - Integrated PLC control with operating device - Hydraulic power unit and all function-relevant connections (Subject to changes and errors in technical data, all information provided without liability!) We are happy to answer further questions by phone.