Beli Lampu Panas bekas (1.515)

Kondisi: bekas, Listing ini untuk 1 dari 5 unit Spectroline Es-160/FBE UV Lamp. Fjdpsxxzbksfx Adgjft Unit dalam kondisi kerja penuh dan siap untuk segera digunakan. Spectroline Es-160/FBE UV Lamp adalah lampu UV genggam, gelombang panjang yang dirancang untuk berbagai aplikasi, termasuk deteksi kebocoran, curing, dan inspeksi. Berikut fitur dan spesifikasi utamanya: Tabung: 6W, UV-A gelombang panjang (365nm) Tegangan: 120V/60Hz Dimensi: 63,5 mm (tinggi), 3-1/4"W x 10"L x 4-1/4"T Pegangan: Dapat dilepas

Kondisi: sangat baik (bekas), GEA FlowCook 8000/600. Panjang pemasakan 8 meter, lebar 600 mm. Kondisi sangat baik, sangat jarang digunakan. Pemanas listrik, daya 283 kW. Ffodpjx Ili Hefx Adget

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HKA-50, daya: 200 kW (271,92 hp), kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.510 rpm, jenis pendinginan: air, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual,

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Fsdpfx Aevz Hq Tsdgjft Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: bekas, Floodlight: Max. 1,000 W Stand Height: 192 cm 2 ESYLUX HAST 1000 floodlights with stand and control unit for illuminating and heating workpieces, workspaces, or other application areas. Fjdsqy Rq Ispfx Adgeft

Kondisi: baik (bekas), 1. Pagomat – professionelle industrielle Etikettiermaschine. Automatische Etikettenaufbringung auf einer Förderlinie. Aus laufender Produktion entnommen und sofort einsatzbereit, ins Lager umgesetzt. Preis: 2.500 €. 2. Edelstahlbehälter – Inox-Behälter zur Lagerung von Flüssigkeiten, robust und langlebig. Stückpreis: 600 €. Ffsdpfx Adexxvqmjget 3. Aufnahmebehälter – Puffertank / Luftabscheider mit Rohrleitungen. Edelstahl, stabile Ausführung, mit Steuerschrank ausgestattet. Preis: 500 €. 4. Reibe/Shredder – Metallkonstruktion mit Motor. Robuste Ausführung, geeignet für Werkstätten und Lebensmittelverarbeitung. Preis: 800 €. 5. Kačkavaljka – Inox-Maschine zur Verarbeitung und Mischung von Kačkavalj-Käse, mit Steuerpult und kompletter Rohranschlussausstattung, 500-l-Kapazität, aus laufendem Betrieb ins Lager umgesetzt. 8.500 €. 6. Pagomat – Trayverpackungsmaschine mit Möglichkeit der Schutzgasbegasung (MAP). Aus der Produktion genommen und eingelagert, Komplettanlage. Preis: 6.000 €. 7. Pagomat – professionelle Etikettiereinheit, komplett mit Befestigungen und Steuereinheit. Preis: 2.500 €. 8. Plattenwärmetauscher – Maximaler Wasserdurchfluss 3.000 l/h. Preis: 500 €. 9. Wasserfilter – Set aus zwei Einheiten, mit Anschlussarmaturen und Gehäuse. Geeignet für Industrie- und Lebensmittelverarbeitung. Preis: 100 €. 10. Plattenwärmetauscher – Alfa Laval. Kompaktes Mehrplattenmodell, ideal zum Kühlen und Erhitzen von Flüssigkeiten in der Lebensmittel- und Industrieanwendung. Preis: 4.500 €.

Kondisi: bekas, Listing ini untuk Schott Halogen HT2 Stirrer Hotplate. Unit dalam kondisi bekerja penuh dan siap digunakan segera. Fitur & Spesifikasi Utama: Walaupun nilai teknis spesifik untuk kode "HT2" tidak banyak dipublikasikan, model SLR Halogen yang tercantum memberikan indikasi yang sangat baik mengenai performa tipikal: - Permukaan pemanas: piring atas kaca/keramik (sekitar diameter 16 cm pada salah satu listing). - Suhu maksimum permukaan piring: hingga ~500 °C. Fsdpfxexv Aa Nj Adgeft - Rentang pengadukan: kurang lebih 10–1.100 rpm (pada salah satu listing). - Dimensi kompak: salah satu listing menunjukkan ~24 × 37 × 9 cm (L×P×T). Cocok untuk digunakan dengan batang statif.

Kondisi: baik (bekas), Tahun pembuatan: 1994, Electric heat exchanger, swimming pool heater, heat exchanger - 400 VAC, 26.0 A - Pressure: max. 3 bar - Dimensions: 980/180/H180 mm Fsdpfob A H S Ejx Adgeft - Weight: 3.1 kg

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 49 kW Working output: 45 kW Brand new in original packaging: Yes Warm air blower, flue gas fan, electronic control with digital display: included Intake air filter, recirculation intake filter: large-surface intake filter with no loss of performance / included Warm air ducting pipes: 2 x 200 mm with plug-in, freely rotatable 90° bends Flue outlet diameter: 180 mm Ffodpfx Ajpn Nyzjdgjt Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air delivery: 3500 m³/h Intake air filter: Yes, large-surface intake filter with no loss of performance Power consumption: 550 W Designed for room volume: 1000 m³ Weight: 310 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Ffodpfx Adjvz Hq Hsget Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Baujahr 2006 Format max. 320 x 510 x 70 mm Leistung max. 15.000 Zyklen/h Zusammentragmaschine 18 Stationen ZU 841 - Optische Bogenkontrolle: SignalLynx - ATC Dickenkontrolle 1 Ausschleusstation AS 841 Klebebinder - Anzahl Klammern: 30 - Hauptfrässtation - 1. Rückenbearbeitungsstation - 2. Rückenbearbeitungsstation - 3. Rückenbearbeitungsstation - Bürsteinheit Fodpfxex Np Szs Adgoft - Vorbereitung für erstes Rückenleimsystem - Hotmelt-Rückenleimeinheit, austauschbar - Vorschmelzer für Rückenleimeinheit: LH 375.C - Vorbereitung für zweites Rückenleimsystem - Hotmelt-Rückenleimeinheit, austauschbar - Vorschmelzer für Rückenleimeinheit: LH 375.C - Vorbereitung für Seitenleimsystem - Hotmelt-Seitenleimeinheit, austauschbar - Vorschmelzer für Seitenleimeinheit: LH 375.A - Deckanleger: SAL 411.C - Rillstation max.: 6 - 1. Press- und Quetscheinheit - 2. Press- und Quetscheinheit - Ablegeeinrichtung (links) Transportsystem Kolbus TSE - Transportsystem Länge (ca.) 50 Meter - Förderturm Ambaflex - Auswurfeinheit Dreimesserautomat Kolbus HD 152P - Zähler: nur 14,367 Mio.! - Co-Pilot mit Touchscreen - Rechtseinlauf - Querschuppenanleger - Messer-Voreinstellvorrichtung - Messersätze: 2 - Austauschbare Schneidetische (Standardsatz): 7-18 - Silikonsprüheinrichtung Auslage - Rima Stacker 3310 (Kolbus XRS 130) - Rima Statikgerät 110

Kondisi: bekas, Plate Heat Exchanger, Heat Exchanger, SPX 034.MGS.10.1, mesin bekas Ffsdpfsx Da Duox Adgst Produsen: SPX Tahun: 2012 Dimensi keseluruhan: 450 x 610 x 1360 mm Luas permukaan perpindahan panas: 18,93 m² Tekanan kerja: 10 bar

Kondisi: bekas, Diese Anzeige betrifft einen Grant QBA1 Heizblock. Das Gerät befindet sich in voll funktionsfähigem Zustand und ist sofort einsatzbereit. Der Grant QBA1 Heizblock ist ein spezieller Einsatz für die Grant Instruments QB Serie Trockenthermoblocks und wurde für optimales Temperaturmanagement sowie vielseitige Laboranwendungen entwickelt. Dieser Heizblock ist besonders geeignet für Anwender, die zuverlässige und präzise Erwärmung für verschiedene biochemische und molekularbiologische Experimente benötigen. Hauptmerkmale: Austauschbare Blöcke: Der QBA1 Heizblock ist passgenau für die Grant QB Serie Trockenthermoblocks konzipiert. Die Interchangeability ermöglicht einen schnellen Wechsel zwischen unterschiedlichen Blöcken, je nach spezifischen Anforderungen der jeweiligen Anwendung, und steigert so die Effizienz im Arbeitsablauf. Präzise Temperaturregelung: Ein herausragendes Merkmal der Grant QB Serie ist die ausgezeichnete Temperatursteuerung und die gleichmäßige Wärmeverteilung auf der Heizfläche. Diese Präzision ist essentiell für Experimente, bei denen exakte Temperatureinstellungen, wie z. B. bei Enzymreaktionen und temperaturempfindlichen Prozessen, erforderlich sind. Breites Anwendungsspektrum: Enzymatische Verdauungen: Der QBA1 Heizblock ist ideal für Anwendungen, die eine konstante und kontrollierte Erwärmung der Enzymaktivität erfordern und ermöglicht Reaktionen bei optimalen Temperaturen. Studien zur Enzymaktivität: Er bietet eine stabile Arbeitsfläche zur Untersuchung der Enzymkinetik und weiterer Parameter, was genaue und reproduzierbare Ergebnisse gewährleistet. Nukleinsäure-Hybridisierungen: Der Heizblock eignet sich für das Temperieren von Proben in Nukleinsäure-Studien, beispielsweise für Hybridisierungs-Assays und PCR-Vorbereitungen. Ffodpfxjxxz Rrs Adget Hochwertiges Design: Die Grant QB Serie Trockenthermoblock-Systeme, einschließlich des QBA1 Heizblocks, bestehen aus robusten Materialien, die Langlebigkeit und Zuverlässigkeit sicherstellen. Dank dieser Qualitätskonstruktion ist der Heizblock auch für anspruchsvolle Einsatzbereiche geeignet, in denen Konsistenz unabdingbar ist.

Kondisi: baik (bekas), Heat exchanger for shielded gas welding machine, shielding gas equipment, cooler Fjdpjwubqtofx Adgoft - Manufacturer: CLOOS, heat exchanger from shielding gas welding machine GLC 353 MC3 - Fan: ebm papst type M4Q0465-DA01-S8 - Dimensions: 330/160/H330 mm - Weight: 4.2 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, 1 Fodex A T Tyspfx Adgoft

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm Fsdpfsvz Hqysx Adgoft - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, daya: 114 kW (155,00 hp), bahan bakar: diesel, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Heating gun "CLK 120" dari REMKO adalah pemanas berkekuatan tinggi yang dapat digunakan untuk aula, bengkel, tenda acara, bahan-bahan, rumah kaca, dan lain-lain. Saat ini masih tersedia 3 unit di stok untuk pengiriman segera. Kondisi: Baru / tidak terpakai dari pembersihan gudang / likuidasi Ruang lingkup pengiriman: 1 unit Pemanas Remko CLK 120 dengan burner minyak 1 unit Tangki solar Roth portabel 1000 L 1 unit Termostat ruangan dengan kabel penghubung Daya panas nominal: 114 kW Aliran udara: 8050 m³/jam Bahan bakar: Minyak pemanas EL Konsumsi bahan bakar: maks. 11,2 L/jam Kehilangan gas buang: maks. 9% Koneksi gas buang: Ø 200 mm Outlet udara: Ø 500 mm Tegangan sambungan: 230 V Dimensi (T/P/L) Fjdpfx Adsxgbbtsgeft sekitar 1350 x 920 x 2100 mm Berat: sekitar 296 kg Mesin dapat dilihat di lokasi dengan perjanjian. Semua informasi tanpa jaminan. Penjualan sewaktu-waktu dapat berubah.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 02048020376, Termasuk unwinder rol HUNKELER RW4-HS 7121 (No. mesin: 1509697 // Thn: 2004) Fsdpfx Adsxmiqiogeft Dengan stasiun transfer LCM 7084 (No. mesin: 659595/2 // Thn: 2001)

Kondisi: bekas, Daftar ini untuk Hulme Martin 3151 Heat Sealer. Fodoxhgc Eopfx Adgjft Unit dalam kondisi kerja penuh dan siap digunakan segera. Model ini dilengkapi dengan Kontrol Elektronik Pendingin dan Pemanas.

Kondisi: bekas, kapasitas tangki: 2.950 l, EN_GENERAL Equipment: Crane lugs Design: Suspended Remarks: 4 lugs made of V2A; total height is estimated Speed: 1,475 rpm Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 3,500 mm Heating/Cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 151°C Max. permissible operating overpressure: 5.0 bar Max. overpressure: 2.5 bar Agitator: Dissolver Base type: Lug supports Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder temperature control: Double jacket Nameplate: Vacuum: 0.9 bar Volume: 2,950 liters Double jacket volume: 148.0 liters Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 138°C HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel Insulation thickness: 70 mm Ffjdpexqadzofx Adget EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator arrangement: eccentric in top head Agitator equipment: additionally 1 propeller on the agitator shaft Top head wall thickness: 5.7 mm

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. Ffedpfx Asvz Hqtsdgst The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, daya: 150 kW (203,94 hp), bahan bakar: diesel, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Heater cannon "CLK 150" dari REMKO adalah pemanas bertenaga tinggi yang dapat digunakan untuk aula, bengkel, tenda acara, material, rumah kaca, dan lain-lain. Saat ini masih tersedia 3 unit di gudang untuk pengiriman segera. Kondisi: Baru / tidak terpakai dari pembersihan gudang / likuidasi Paket penyerahan: 1 unit pemanas Remko CLK 150 dengan burner minyak 1 unit tangki minyak pemanas mobile Roth 1000 L 1 unit termostat ruangan dengan kabel penghubung Beban panas nominal: 150 kW Kapasitas udara: 9710 m³/jam Bahan bakar: Minyak pemanas EL Konsumsi bahan bakar: maks. 14,8 L/jam Kerugian gas buang: maks. 9% Koneksi knalpot: Ø 200 mm Outlet udara: Ø 500 mm Tegangan sambungan: 230 V Dimensi (T/L/P): Ffodpjxli I Sjfx Adget sekitar 1350 x 920 x 2100 mm Berat: sekitar 312 kg Mesin dapat dilihat di lokasi berdasarkan janji temu. Semua informasi tanpa jaminan. Penjualan antar waktu tetap menjadi hak kami.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ Ffedsvz Hqmspfx Adgjt - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. Fsdjvz Hqgepfx Adgoft A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. Fedpsvz Hhxjfx Adgjft All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.