Beli Maho 400 E bekas (454)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 18.700 h, produsen pengendali: SIEMENS, model controller: Sinumerik, beban meja: 3.100 kg, berat keseluruhan: 24.500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 35.000 W, berat alat: 6.000 g, jumlah sumbu: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It is a robust vertical machining center featuring a high-speed main drive up to 40 kW and rapid traverses of 100 m/min on the X-axis and 60 m/min on the Y and Z-axes. The worktable measures 3,100 × 900 mm and has a load capacity of 3,100 kg. If you are looking for a high-quality milling machine, you should consider the DECKEL MAHO DMF 250 Linear machine we are offering for sale. Contact us for further information. Additional equipment: • Safety devices: Monitored and interlocked work area door; key switch for normal and setup mode; limited functions when the door is open Machine advantages: Technical advantages of the machine: • Feed rate: up to 20,000 mm/min • Clamping surface: 3,100 × 900 mm • T-slots: 9, 100 mm spacing • Tool magazine capacity: 30 stations • Measuring system resolution: 0.001 mm • Electrical connections: Power supply 3N/PE~400/230 V, 50/60 Hz; Power consumption 82 kVA • Pneumatics: Compressed air 5.5-8 bar; Air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories up to 29,280 kg Additional information: Ambient temperature: +15°C to +35°C; Humidity: 20-75%. Tool magazine size 120 - magazine cabinet - tool change is performed via shuttle - tool holder available only on request and subject to availability (extra) - machine is a 3-axis machine (rotary table not available). Further configurations or commissioning documentation are no longer available. Z-axis brake defective, roller shutter in the machine room defective, monitor cable defective. Redpfxox Nr Tue Ahwop

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Technical Details X-travel: 1040 mm Y-travel: 600 mm Z-travel: 500 mm Control system: Heidenhain iTNC 530 Table size: 1250 x 600 mm Table load capacity: 600 kg Tool holder: SK 40 Spindle speeds: 1 – 8,000 rpm Spindle torque (S1/S6): 140/200 Nm Feed range: 40,000 mm/min Rapid traverse (X and Z): 70 m/min Rapid traverse (Y): 40 m/min Spindle motor (100/40% duty cycle): 13/19 kW Total connected load: 39 kVA Machine weight approx.: 8.9 t Space requirements approx.: — m Additional Information Power-on hours: 70,278 Spindle hours: 23,335 Please note the attached geometry measurement protocol and the tool clamping force measurement. Equipment: - CNC path control Heidenhain iTNC 530 - Electronic handwheel Heidenhain HR 410 - Motor spindle with increased torque Rsdpfsyml U Ssx Ahwsp - Direct measuring systems in Y and Z axes - Preparation for probe system - Tool changer, 30 positions; tool diameter 100/140 mm, length 300 mm, weight 7 kg - ROTOclear - Production package 2 - Internal coolant supply through the spindle, 20 bar - Coolant system with paper band filter - Cooling device, air blast through spindle center, selectable via M function - Chip conveyor - Bed flushing - Linear drive in X axis - Operating mode 4: Program check with extended manual intervention - Machine documentation Transport dimensions: 4,100 x 2,500 x 3,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: SIEMENS, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 35.000 W, jumlah sumbu: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with an X-axis travel of 750 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of 24,000 rpm and a tool magazine with a capacity of 120 positions. It also includes a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, the DMG DECKEL MAHO DMU 70 EVO Linear we offer for sale is an excellent choice. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping area 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 l Rodjymcvmopfx Ahwsp • Probe • Chip conveyor • Electronic handwheel (remote control) • DMG PH 150 L8 pallet changer system, 8 stations (pallets not included) Technical Specification Taper size HSK 63

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages - Fully enclosed cabin with sliding door Redpovt D D Uofx Ahwop - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 2004, Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Rjdpfx Ahjylykxewjp

Kondisi: bekas, jam operasional: 18.001 h, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 920 mm, jarak gerak sumbu Z: 820 mm, daya nominal (semu): 82 kVA, produsen pengendali: Heidenhain iTNC 530, panjang benda kerja (maks.): 900 mm, lebar benda kerja (maks.): 900 mm, tinggi total: 3.267 mm, panjang total: 4.523 mm, lebar total: 8.436 mm, kecepatan rotasi (min.): 12.000 rpm, kecepatan spindel (min.): 12.000 rpm, jumlah slot dalam magazin alat: 80, carac-001 Rsdpeylw D Aefx Ahwjp

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, Dengan kontrol jalur Siemens 840 D sl Operate Tahun pembuatan: 2016 Gerakan sumbu: X 400 Y 400 Z 375 Kisaran kecepatan putar: 20 – 20.000 rpm tanpa tingkat Dengan perlengkapan berikut: Meja putar NC ayun 450 mm x 400 mm termasuk pendingin meja Penukar alat 60 posisi dengan double gripper (HSK 63) Rsdpeylpa Nofx Ahwop Probe pengukuran 3D Heidenhain Handwheel elektronik Pendinginan alat bertekanan tinggi 40 bar dengan filter pita kertas Konveyor serutan tipe sabuk geser Pembilasan alas mesin Pendingin aktif untuk panel kontrol Pendinginan spindle: sirkulasi air Rotoclear Sistem pengukuran posisi langsung Udara tiup melalui tengah spindle 3 kaki mesin yang dapat disesuaikan ketinggiannya Manual pengoperasian

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, produsen pengendali: SIEMENS, model controller: 840 D, lebar meja: 500 mm, panjang meja: 500 mm, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 20.000 W, jumlah slot dalam magazin alat: 303, jumlah sumbu: 4, This DMG DMC 60H Linear horizontal machining center was manufactured in 2013 and has 46,048 production hours. It is equipped with a Siemens 840 D control unit and features 4 axes. The machine has a spindle speed of 18,000 rpm. Please refer to the original delivery note (PDF attached) for a full list of technical specifications. Additional Equipment • Scraper-type chip conveyor with 980-liter coolant system, paper band filter, discharge height 950 mm, width 380 mm, high-pressure coolant through the spindle (IKZ) 80 bar / 14 l/min (AD), infinitely programmable pressure, selectable via NC program, enclosure rinsing 180 l/min via spray nozzles using a Rippel valve • Rotatable viewing window / work area door • Coolant gun with pump • Double gripper • Wheel-type tool magazine • NC rotary table, Ø 630 mm • 3D path control Redpfx Aeyi Ekfshwop Machine Advantages Quality Advantages • MCIS TDI tool management (TDI machine module) – overview, tool management, planning • Mechanical and electrical pre-installation for oil mist extraction • Tool breakage detection via mechanical design Technical Advantages • Number of pallets: 12 // round pallet storage: RS 12 • Rotating pallet changer // worktable with pallet supports // max load: 600 kg // 2 pallets 500 x 500 mm with T-slots // pallet management // pallet changer enclosure // claw-rinsed pallet • Coolant through spindle: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine places, HSK A63 • Infrared measuring probe Renishaw PP60 optical (OMP60) HSK-A 63 • MPC protective machine control (machine protection by rapid shutdown) • Laminated safety glass window for the right cabin door Additional Information Documentation and electrical circuit diagram (in German) available.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 32.498 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, daya nominal (semu): 35 kVA, produsen pengendali: Heidenhain iTNC 530, lebar benda kerja (maks.): 500 mm, diameter benda kerja (maks.): 630 mm, berat benda kerja (maks.): 200 kg, tinggi total: 2.590 mm, panjang total: 4.780 mm, lebar total: 4.410 mm, berat keseluruhan: 5.900 kg, kecepatan spindel (min.): 18.000 rpm, daya motor spindle: 35.000 W, Year of manufacture: 2010 CNC control: Heidenhain iTNC 530 Axes Travel X-axis (mm): 500 Travel Y-axis (mm): 450 Travel Z-axis (mm): 400 C-axis indexing (°): 360º (0.001) B-axis indexing (°): 0º/108º (0.001) Rapid traverse (m/min): 80/50/50 NC milling/turning table: Pallet dimensions (mm): Ø390 Max. workpiece size (D x H, mm): Ø630 x 500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 18,000 Spindle drive power (kW): 35/25 (40% duty cycle/cont.) Spindle torque (Nm): 130/87 Cooling Coolant supply through spindle (bar): 40 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 30 With empty adjacent pockets (mm): 130 With filled adjacent pockets (mm): 80 Max. tool length (mm): 300 Chip-to-chip time (sec.): 5 Equipment Chip conveyor Infrared probe Rinse gun Air blast through spindle selectable via M function Signal lamp Laser tool measurement for tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Prepared for internal cooling (40/80 bar) RENISHAW probe Automatic door Machine run time: Rjdpfx Ahsyi Dnijwep Power-on hours: 54,257 Spindle hours: 32,498 Total power requirement (kVA): 48 Basic machine: dimensions/weight Length (mm): 4,780 Width (mm): 4,410 Height (mm): 2,590 Weight (kg): 5,900

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 42.768 h, produsen pengendali: HEIDENHAIN, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, en Rodpfx Ahox Rd Hpjwsp

Kondisi: bekas, 1x Mesin CNC Milling Bekas: Pabrikan: DMG - DECKEL MAHO Tipe: DMF 220 linear Rodpfx Ajyl R Ubshwsp Tahun pembuatan: 2002 Jam operasional: Waktu nyala menurut counter: 42.378 jam Waktu spindle menurut counter: 11.472 jam Pusat pemesinan 3-sumbu Kontrol: Siemens NC-840D Jarakan sumbu: 2.200/560/720 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Rjdjxv Av Repfx Ahwep Height mm: 2,900 Weight kg: 9,500 + System 3R

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 46.048 h, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, produsen pengendali: SIEMENS 840D, berat benda kerja (maks.): 600 kg, tinggi meja: 500 mm, panjang meja: 500 mm, kecepatan rotasi (min.): 18.000 rpm, Kontrol CNC: SIEMENS 840D solutionline Operate Sumbu Perjalanan sumbu X mm: 630 Perjalanan sumbu Y mm: 800 Perjalanan sumbu Z mm: 850 Meja Kerja Jumlah palet: 12 Ukuran palet mm: 500x500 Berat benda kerja maks. kg: 600 Rjdpfsyh Niaox Ahwsp Spindel Kecepatan putar spindel maks. rpm: 18000 Sistem alat Tipe holder alat: HSK-A63 Jumlah alat di majalah: 303 Perlengkapan Konveyor serbuk Jendela penglihatan berputar Pistol pencuci Udara tiup melalui tengah spindel dapat dipilih melalui fungsi M Pompa tekanan tinggi Sensor patah alat Pistol pendingin MPC – Machine Protection Control Probe inframerah CE Penyimpanan palet bulat Pendinginan Pasokan pendingin melalui spindel bar: 80 Kapasitas tangki liter: 980 Waktu operasional mesin: Jam dengan daya aktif: 46048 Jam kerja spindel: 29258

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), X-tengely: 750 mm, Y-tengely: 600 mm, Z-tengely: 520 mm, C-tengely: 360°, B-tengely: 180°, max. orsófordulatszám: 18.000/perc, vezérlés: Siemens SINUMERIK 840D powerline, csatlakozási teljesítmény: 55 kVA, hossz: 4603 mm, szélesség: 5250 mm, magasság: 2785 mm, tömeg: kb. 9 t, üzemóra: bekapcsolási idő kb. 65.000 h, orsó üzemóra: kb. 19.000 h. Ismert hibája nincs, belső karbantartás történt, karbantartási jegyzőkönyvek nélkül, dokumentációval, körasztallal, nagynyomású belső hűtéssel és Bluhm orsóérintkezővel. Helyszíni megtekintés lehetséges. Rodsylbq Hjpfx Ahwep

Kondisi: bekas, Tahun pembuatan: 2009, x-axis travel: 1,800 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: iTNC 530 Heidenhain Speed range - main spindle: 20 – 18,000 rpm Drive power - main spindle: 25 / 35 kW Max. torque: 130 / 87 Nm Tool holder: HSK A63 DIN 69893 Swiveling B-axis: +/- 100° Table clamping surface: 2,100 x 700 mm Max. table load: 1,500 kg Number of T-slots: 7 Table diameter: 750 mm Redpfx Ajyhhtgshwop Max. table load (rotary table): 500 kg Number of T-slots (rotary table): 7 Rotatable C-axis: 360° Number of tool positions: 30 Tool holder: HSK A63 DIN 69893 Max. tool weight: 6.0 kg Max. tool diameter: 80 mm Max. tool diameter with adjacent vacant pocket: 130 mm Max. tool length: 300 mm Chip-to-chip time: 7.6 sec Rapid traverse (X / Y / Z): 40 m/min Acceleration: 4 m/s² Max. feed rate: 40,000 mm/min Feed force (X / Y / Z): 8 kN Total power requirement: 70 kVA Machine weight: approx. 13.0 t Required space: approx. 7.0 x 6.2 x 2.8 m 5-axis CNC gantry-type milling machine DECKEL MAHO - DMF 180 New Design - Swivel milling head (B-axis) - Integrated rotary table - Internal coolant supply - Operating hours: spindle hours approx. 10,000 h

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: HEIDENHAIN, model controller: 426m, jumlah sumbu: 3, This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, with travel distances of X 800mm, Y 650mm, and Z 550mm. It is equipped with a 24-position automatic tool changer and an internal hard drive. The installation dimensions are approximately 2x3m. If you are looking for a high-quality milling machine, you should consider the DECKEL MAHO DMU 80E that we are offering for sale. Please contact us for further information about this machine. Additional equipment: • Machine vise • Angle table • Various tool holders • Royal presetting device Rsdpfsx D E Ewjx Ahwep Machine advantages Technical advantages: • Installation dimensions: approx. 2000 mm x 3000 mm • In 2013, axes overhauled and spindle ground • Y-axis linear guide replaced • Cylinder head screw with internal hex replaced • Y-axis ball screw replaced • Axial angular contact roller bearing ZKLF 3080 2RS replaced • Spindle taper reground by external company Additional information: Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 8.989 h, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 60, berat alat: 250.000 g, sudut putar sumbu B (min.): -4 °, sudut putar sumbu B (maks.): 110 °, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, en Redpfx Aheygvt Sjwjp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, produsen pengendali: HEIDENHAIN, jumlah sumbu: 3, Mesin milling 3-sumbu DECKEL MAHO 64 V linear ini diproduksi tahun 2002. Mesin ini memiliki holder alat SK40 dan penukar alat otomatis dengan kapasitas 30 alat. Dilengkapi dengan filter pita kertas. Perlu diperhatikan bahwa probe ukur perlu diservis karena kesalahan komunikasi. Jika Anda mencari mesin milling berkualitas tinggi, pertimbangkan DECKEL MAHO 64 V linear yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Redpfxsx D E Hhj Ahwop • Kapasitas ATC: 30 alat Perlengkapan tambahan • Filter pita kertas (filtrasi cairan pendingin) • Probe (perlu servis, terdapat kesalahan komunikasi) Spesifikasi teknis Ukuran tirus SK 40

Kondisi: bekas, Tahun pembuatan: 2012, x-weg 800 + 50 mm y-weg 650 mm z-weg 550 mm b-as -5 / +110° c-as NX 360 0 Heidenhain besturing Nieuwe lagers op de x- en z-as. Nieuwe spil bij 23.300 uur. Rsdpfx Asyi Hvcohwop

Kondisi: siap digunakan (bekas), X-axis: 500 mm, Y-axis: 400 mm, Z-axis: 350 mm, quill stroke: 50 mm, spindle speed: 20–5000 rpm, connected load: 10 kVA, control unit: Maho CNC 432, length: 2022 mm, width: 3030 mm, height: 1915 mm, weight: 2.1 t, operating hours: 29,578 h, with documentation, without spare parts. The machine is in excellent mechanical and electrical condition; the control elements have recently been overhauled. Redjkn R Dhepfx Ahwjp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 62.469 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It is equipped with a Heidenhain iTNC 530 control unit, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine features a tool magazine with 32 positions and a robust coolant system with a capacity of 280 liters. If you are looking for a high-quality milling machine, you should consider the DECKEL MAHO DMU 70 eVo that we are offering for sale. Please contact us for further information about this machine. • Operating hours (as of 04.07.2023): • Service hours: 62,469 h • Spindle hours: 17,307 h • Rotary/tilt axes: • C-axis indexing: 360° • B-axis indexing: 0-180° • Workpiece: • Max. workpiece diameter: 700 mm • Tool system: • Tool magazine: 32 positions • Coolant unit: Redpfx Ahjydlacswsp • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: external coolant supply • Rapid traverse (X/Y/Z): 50 m/min Additional equipment: • Touch probe: TS 641

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), X/Y/Z travel: 2500mm/900mm/800mm, spindle speed: 18,000 rpm, spindle power: 35 kW, max. table load: 3,000 kg, tool stations: 30. Machine dimensions X/Y/Z: approx. 6,500mm/3,000mm/3,000mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D, operating hours: 55,730h, spindle hours: 18,696h. Z-axis brake defective, machine enclosure shutter defective, monitor cable defective. Includes Knoll VRF 250/1250 coolant system. Documentation available. Inspection on site possible. Redpfx Asvamqdjhwsp

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Travel paths X/Y/Z: 885mm/600mm/600mm, rotary axes B/C: -10° to 110°/360°, rapid traverse X/Y/Z: 90m/min, spindle speed: 28,000 rpm. Table dimensions X/Y: 950mm/650mm, control: iTNC 530, operating hours: 90,711 h, spindle hours: 19,457 h. Includes workpiece touch probe, tool changer with 100 positions. Rjdpsta H S Sefx Ahwop

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18,000 rpm, spindle power: 25kW/35kW, table diameter: 950mm, maximum table load: 800kg, max. workpiece height: 500mm. Tool stations: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed rate: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113,894 h, spindle hours: 13,349 h. Includes chip conveyor, internal coolant supply (IKZ), linear scale, Blum laser and probe. Documentation available. On-site inspection possible. Rjdsv H Dgcepfx Ahwjp

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), cnc-5-achs-fraesmaschine-deckel-maho-angebot Redpfx Ahjx Dm D Uowop