Beli Mazak Ajv bekas (368)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 16.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 720 mm, tinggi total: 3.376 mm, beban meja: 2.500 kg, berat keseluruhan: 16.300 kg, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 33.000 W, berat alat: 8.000 g, panjang produk (maks.): 5.480 mm, jumlah sumbu: 5, This Mazak VTC 800/30 SR 4-axis vertical machining center was manufactured in 2016 and stands out for its robust construction. It features a table width of 3,500 mm and a length of 820 mm. The spindle offers a maximum speed of 18,000 rpm, with rapid traverse rates of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer offering 30 stations and supports a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Minimum distance spindle nose to table: 140 mm • Maximum distance spindle nose to table: 860 mm • Working spindle • Tapered tool holder (40° taper; 155 HSK tools not included if ordered) • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Work table • T-slot width: 18 mm • Number of T-slots: 7 • T-slot pitch: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool holder: 40° steep taper • With adjacent locations occupied: 80 mm • With adjacent locations free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Supply voltage: 380/400/415 V +10% • Supply frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank capacity: 500 l Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Bracket for vertical rotary table operation Dujdpfsx Nkp Uex Abhjn • 2x Renishaw TS27R integrated tool presetters • Spare parts: • Y-axis motor for tool magazine • Linear axis drive motor • Motor for rotary axis drive • Cylinder for tilting unit

Kondisi: baik (bekas), Tahun pembuatan: 2004, panjang pembubutan: 2.000 mm, Model: E-650H Duedpfexvyq Ejx Abhsn Kontrol: Mazatrol 640M Pro Tahun: 2004 Jarak Antara Senter: 2000 mm Diameter Ayunan di Atas Tempat Tidur: 905 mm Mesin Dilengkapi Dengan: Sumbu C Sumbu Y Perkakas Hidup/Pengefraisan Sumbu B Chuck Hidrolik 800 mm Steady Manual 375 mm Steady Terbuka 600 mm Filter Kabut Udara

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, The machine is in good condition. It is powered and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: --> see picture Machine No.: 252 153 Control unit: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Dodpfoi Ik Hksx Abhoun Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Driven tool speed: 4,000 rpm Driven tool power: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine is equipped as standard with the 'Relocation Detector.' For recommissioning, the machine must be unlocked by Mazak. Options: - Y-axis - Gantry loader GL200F - Air blow device for workpiece transfer - Chip conveyor, rear discharge - Cylinder and polar interpolation (EIA) - High-pressure and return pump (original pumps included) Accessories HD 1: - Power chuck Kitagawa B-210 - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Power chuck Kitagawa B-210 - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Price: EXW (loaded onto provided truck) Furthermore, we offer a set of tool holders for this machine (see last picture). Note: separate item, not included in the machine offer. Comprising: Static holders: 2 pcs. external turning tool holders 13 pcs. facing tool holders 3 pcs. parting holders 5 pcs. boring bar holders Ø 32 2 pcs. boring bar holders Ø 40 8 pcs. boring bar holders Ø 50 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling head SK40 8 pcs. radial drilling and milling head SK40 3 pcs. radial drilling and milling head ER40 5 pcs. swivel head The original value of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (incoterms EXW, excluding transport)

Kondisi: baik (bekas), Tahun pembuatan: 2013, diameter pembubutan: 380 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 575 mm, daya: 26 kW (35,35 hp), For sale: CNC lathe Mazak Quickturn Nexus 200-II MS. The machine is in good condition and ready for immediate operation after installation. The machine is currently connected at the customer’s site and can be inspected under power. Technical Specifications: Year of manufacture: 2013 Duedpfxjtqud Ae Abhen Main spindle hours: 10,421 h Sub spindle hours: 4,262 h Control: MAZATROL Matrix Nexus Main spindle chuck diameter: 8" Sub spindle chuck size: 6" Swing diameter: 675 mm Max. machining diameter: 380 mm Max. bar diameter main spindle: 65 mm Max. spindle speed main spindle: 5,000 rpm Motor power 30 min duty: 26 kW Max. spindle speed sub spindle: 6,000 rpm Power (40% ED): 11 kW Tool stations: 12 Driven tool stations: 12 Travel distance X-axis: 230 mm Travel distance Z-axis: 575 mm Dimensions: 2,765 x 1,780 mm Weight: 4,900 kg Offer does not include accessories such as tools or tool holders. Loading and shipping throughout Europe can be arranged upon request. All prices are subject to VAT. Inspection by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 380 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 230 mm, jarak lintasan sumbu Y: 575 mm, daya: 65 kW (88,38 hp), For sale is a CNC lathe from Mazak, model Quickturn Nexus 200-II MS. The machine is in good condition and ready for immediate use after installation. Technical specifications: Year of manufacture: 2015 Main spindle operating hours: 10,379 h Sub spindle operating hours: 6,741 h Control system: MAZATROL Matrix Nexus 2 Main spindle chuck diameter: 8" Sub spindle chuck size: 6" Swing diameter: 675 mm Max. machining diameter: 380 mm Max. bar capacity main spindle: 65 mm Max. main spindle speed: 5,000 rpm Motor power (30 min rating): 26 kW Max. sub spindle speed: 6,000 rpm Power (40% duty cycle): 11 kW Tool stations: 12 Driven tool stations: 12 X-axis travel: 230 mm Z-axis travel: 575 mm Dimensions: 2,765 x 1,780 mm Weight: 4,900 kg The offer does not include any accessories such as tools or tool holders. Loading and shipping throughout Europe can be arranged upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Dsdpfx Ajt R S Daobhsun Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Kondisi: bekas, Tahun pembuatan: 2008, en-GB: Mazatrol Matrix CAM PC workstation with full 5-axis licence (incl. PCI card & PC) Description: For sale is a complete, ready-to-use PC workstation equipped with the powerful Mazatrol Matrix CAM software. The licence is perpetual and hardware-bound via a PCI card. This system was previously used on 5-axis machines (Integrex e-1060 V8/II) and includes rare high-end options. The PC has been freshly set up and is fully functional. Ideal for companies with an older Mazak machine fleet looking for an independent programming solution. Licence & Options Details: Dsdpfx Aox Sq Nmsbheun The following key options are enabled and active: (see pictures) 40 SIMULTANEOUS 5 AXIS (simultaneous 5-axis machining) 49 TILTED WORKING PLANE 55 TOOL CENTER POINT CONTROL Other basic options such as EIA, Smoothing Control, Spiral, etc. (see photo of the options menu) Scope of delivery: PC system: Windows 7 Pro x86 (32 Bit), Intel i5-3470 3.2 GHz, 4 GB RAM, AMD Radeon HD7570 GPU. Fully functional computer with installed operating system (Windows 7 Pro x86) and pre-installed software. PCI licence card: The physical licence hardware, installed in the PC. Original packaging: The software’s original packaging as shown. Documentation: Manual, original CDs/data carriers fr-FR: Station PC Mazatrol Matrix CAM avec licence complète 5 axes (incl. carte PCI & PC) Description : À vendre, un poste PC complet prêt à l’emploi avec le puissant logiciel Mazatrol Matrix CAM. La licence est permanente et liée au matériel via une carte PCI. Le système a été utilisé sur des machines 5 axes (Integrex e-1060 V8/II) et comprend des options haut de gamme rares. Le PC a été fraîchement réinstallé et fonctionne parfaitement. Idéal pour les ateliers disposant d’un parc Mazak plus ancien souhaitant une solution de programmation indépendante. Détails licence & options : Les options suivantes sont activées : (voir photos) 40 SIMULTANEOUS 5 AXIS (usinage 5 axes simultanés) 49 TILTED WORKING PLANE (plan d’usinage incliné) 55 TOOL CENTER POINT CONTROL (contrôle du point central outil) Autres options de base comme EIA, Smoothing Control, Spiral, etc. (voir photo du menu des options) Inclus : PC : Windows 7 Pro x86 (32 bits), Intel i5-3470 3,2 GHz, 4 Go RAM, AMD Radeon HD7570 GPU. PC fonctionnel, système d’exploitation Windows 7 Pro_x86 installé, logiciel préinstallé. Carte licence PCI : carte hardware de licence, installée dans le PC. Emballage d’origine du logiciel tel que présenté. Documentation : Manuel, CD/données d’origine es-ES: Puesto PC Mazatrol Matrix CAM con licencia 5 ejes completa (incl. tarjeta PCI y PC) Descripción: A la venta un puesto PC completo, listo para usar, con el potente software Mazatrol Matrix CAM. La licencia es permanente y está vinculada al hardware mediante tarjeta PCI. El sistema se utilizó en máquinas de 5 ejes (Integrex e-1060 V8/II) y contiene opciones avanzadas poco comunes. El PC ha sido reinstalado recientemente y está operativo. Ideal para talleres con un parque de máquinas Mazak antiguo que buscan una solución de programación independiente. Detalles de licencia y opciones: Las siguientes opciones clave están activas: (ver imágenes) 40 SIMULTANEOUS 5 AXIS (mecanizado 5 ejes simultáneo) 49 TILTED WORKING PLANE (plano de trabajo inclinado) 55 TOOL CENTER POINT CONTROL (control punto central de herramienta) Otras opciones base como EIA, Smoothing Control, Spiral, etc. (ver foto del menú de opciones) Contenido: PC: Windows 7 Pro x86 (32 bits), Intel i5-3470

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, daya laser: 6.000 W, berat keseluruhan: 15.500 kg, jumlah sumbu: 3, This 3-axis Mazak OPT IPLEX 3015 Fiber II was manufactured in 2016. It features a 6 kW fiber laser, Mazatrol Preview 3 control, and a working area of 3050 × 1525 mm. Equipped with advanced features such as automatic nozzle changer, automatic focus positioning, and intelligent monitoring functions, it ensures precise and efficient workflows. Take the opportunity to purchase this Mazak OPT IPLEX 3015 Fiber II fiber laser cutting machine. Contact us for further details. • Operating hours: 53,000 h • Controller: MAZATROL Preview 3 • Mazak control unit: Included • Working area: 3050 × 1525 mm • Resonator: IPG • Cutting head: Multi-Control Cutting Head 2.0 (upgraded) • Intelligent Setup Function (ISF) • Automatic nozzle changer (8 holders) • Automatic nozzle cleaning • Automatic focus positioning • Beam diameter adjustment function • Intelligent Monitoring Function (IMF) • Pierce detection • Burn detection • Plasma detection • Protective window sensor Dusdpox I Sm Eefx Abhen • Condensation lens sensor • Circuit diagram: DD628101002 • Rated power: 57 kVA • Power supply: 3AC 380 V, 50/60 Hz • Auxiliary voltages: AC 100 V / DC 24 V Additional Equipment • Chip conveyor: Yes • Dust collector: Donaldson • Chiller: IPG • Workpiece lifter: Yes

Kondisi: bekas, Tahun pembuatan: 2017, Neue Spindel 2025-08 Jährlicher Service durch Mazak Servicecenter. Inklusive Stangenlader Super 80 Max. Umlaufdurchmesser Ø 658 mm Umlaufdurchmesser über Kreuzsupport Ø 658 mm Umlaufdurchmesser bei aktiver Y-Achse Ø 658 mm Max. Drehdurchmesser Ø 658 mm Max. Drehdurchmesser ab Stange Ø 51 mm (Option Ø 65) Max. Werkstücklänge 1011 mm X-Achse: 615 mm Y-Achse: +/-130 mm Z-Achse: 1077 mm B-Achse: 0,0001° / 240° Spindel 1 Spindelaufnahme JIS A2-6 Spindelbohrung 76 mm Durchgangsbohrung 51 mm (Option Ø 65) Spindelmotor AC 22 kW 40% ED Drehzahlbereich 35-5000 U/min Anzahl der Drehzahlbereiche Direktantrieb Max. Drehmoment 467 Nm 25% ED Max. Werkstückgewicht inkl. Spannfutter 300 kg Spindelmitte über Boden 1235 mm Spindel 2 Spindelaufnahme JIS A2-6 Spindelbohrung 76 mm Durchgangsbohrung Nicht applizierbar (Option Ø 65) Dujdjx Hfl Eepfx Abhen Spindelmotor AC 18,5 kW 40% ED Drehzahlbereich 33-5000 U/min Anzahl der Drehzahlbereiche Direktantrieb Max. Drehmoment 325 Nm 40% ED Max. Werkstückgewicht inkl. Spannfutter 300 kg Spindelmitte über Boden 1235 mm C-Achse 1 Typ Direktantrieb Eilgang 555 U/min Arbeitsvorschub 1-5000 Grad/min Min. programmierbare Schrittweite 0,0001 Grad C-Achse 2 Typ Direktantrieb Eilgang 555 U/min Arbeitsvorschub 1-5000 Grad/min Min. programmierbare Schrittweite 0,0001 Grad W-Achse Verfahrweg 1066 Eilgang 30 m/min B-Achse B-Ausschlag 240 Grad Max. Bearbeitungsvorschub (ISO) 40 U/min Min. programmierbare Schrittweite 0,0001 Grad Werkzeughaltertyp: Werkzeugwechsler Werkzeugschafthalter: 25 x 25 mm Werkzeugwechselzeit, Werkzeug zu Werkzeug: 1,3 Sekunden Span-zu-Span-Zeit, durchschnittlich: 8 Sekunden Werkzeugaufnahme für angetriebene Werkzeuge: Capto C6 Werkzeugaufnahme für Drehwerkzeuge: Capto C6 Max. Werkzeuggewicht: 12 kg Max. Werkzeuglänge: 400 mm Spannkraft für Werkzeug (Capto C6): 33 kN Werkzeugmagazin: Anzahl der Werkzeugplätze: 36 Stück Max. Werkzeugdurchmesser: 90 mm Max. Werkzeugdurchmesser bei leerem Platz davor und danach: 125 mm Max. Werkzeuglänge: 400 mm Max. Werkzeuggewicht: 12 kg Max. Werkzeugdrehmoment: 9,8 Nm Sonstiges: Länge: 3990/4910 mm Breite: 2800 mm Höhe: 2720 mm Gewicht: 13100/16600 kg Leistungsbedarf, kontinuierlich: 72,34 kVA Druckluftbedarf, min.: 5 kg/cm², 410 Liter/min Werkzeugmagazin: 36 Werkzeuge Standardausstattung: B-Achse Capto C6 ATC Auto Recovery Automatische Ein/Aus-Schaltung, Heizplan 19“-LCD-Touchscreen Mazak-Werkzeugidentifikationssystem inkl. 10 ID-Chips (für Capto C6) Messarm zur Werkzeuglängeneinstellung, automatische Kompensation und Bruchüberwachung 8“ Spannfutter Typ: Kitagawa B208A6 8“ Spannfutter Typ: Kitagawa B208A6 Kühlmitteltank Kühldruck für oberen Revolver: max. 5 bar, 23 l/min Satz Anleitungen (digital) Smooth Standard Software: Mazacc 2D Software (shape comp) Mazacc 2D Software für rotierende Achsen (shape comp) Mazacc 3D High Speed Software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA-Programmierung: Dreh- und Frässpindelstart asynchron Synchronisiertes Gewindeschneiden mit angetriebenen Werkzeugen Makro-Unterbrechung ermöglicht ereignisgesteuerte ISO/EIA-Programme Makroprogrammierung mit 600 zusätzlichen Variablenpaaren für ISO/EIA Helixinterpolation für ISO/EIA Koordinatenrotation mit G68 für ISO/EIA Polarkoordinaten, G122 für ISO/EIA Synchronisierte Interpolation X-C-Achse G12.1 für ISO/EIA Koordinatensysteme G54

Tahun pembuatan: 2015, jam operasional: 13.792 h, Kondisi: siap digunakan (bekas), Allgemeine Daten Maschinengewicht: 8.000 kg Steuerung Hersteller: MAZATROL Modell: Preview 3 Hauptantrieb Laserleistung: 4,0 kW Werkstück Werkstückgewicht: 900 kg Arbeitstisch Außenlänge: 3.000 mm Außenbreite: 1.500 mm Tischbelastung: 900 kg Diese Faserlaser-Schneidanlage wurde 2015 hergestellt und ist mit einem 4,0-kW-IPG-Faserlaser sowie einer MAZATROL PREVIEW 3 CNC-Steuerung ausgestattet. Die Maschine ist auf präzises Schneiden von Baustahl bis zu 9,0 mm und Edelstahl bis zu 16,0 mm ausgelegt. Es können Werkstücke mit einem maximalen Gewicht von ca. 900 kg auf einem Tisch mit den Maßen 3.000 mm x 1.500 mm bearbeitet werden. Wenn Sie auf der Suche nach hochwertigen Schneidleistungen sind, empfehlen wir die Mazak OPTIPLEX 3015 FIBER II, die wir zum Verkauf anbieten. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Schneiden Djdpfx Abjx D I Twjheun

Kondisi: bekas, Tahun pembuatan: 2000, Panjang putar 1000 mm Maks. ayunan 640 mm Ø Diameter putar maksimum 540 mm Lubang spindle 51 mm Ø Kecepatan spindle maksimum 4000 rpm (berlaku juga untuk subspindel) Kecepatan spindle milling maksimum 6000 rpm Dsdpep Ui N Hjfx Abhsun Jumlah stasiun pada penukar alat: 40 pcs Kontrol: PC Fusion 640 MT Dilengkapi dengan: Gantry loader 10 dudukan alat

Kondisi: bekas, Tahun pembuatan: 2006, Panjang pembubutan 1500 mm Lubang spindle 105 mm Diameter pembubutan maks. 420 mm Putaran spindle 3300 rpm Putaran alat berputar 3000 rpm Revolver dengan 12 posisi Lunak hidrolik Duodsx Nfwgjpfx Abhsn Kontrol: Mazatrol 640 T Nexus Dilengkapi dengan: Bar feeder FMB SL 80 Brille hidrolik SMW SLU 3,2 3 alat berputar Berbagai pemegang alat

Kondisi: bekas, Tahun pembuatan: 2003, Ukuran palet: 400 x 400 mm Pergerakan X/Y/Z - 560/630/600 mm Kones spindle: ISO 40 Jumlah stasiun pada penukar: 80 unit Indeksasi palet: 0,001° Dujdpfsxfcc Nex Abhjn Kontrol: Mazatrol PC Fusion 640 M Dilengkapi dengan: 2 palet tambahan Beragam dudukan alat

Kondisi: bekas, Tahun pembuatan: 2002, Diameter maks. 430 mm Dsdpfjxfcbfsx Abhsun Panjang putar maks. 600 mm Putaran spindel maks. 4000 rpm Putaran maks. alat berputar 4000 rpm Gerak X/Z – 310/605 mm 2 x revolver 12 stasiun Kontrol: Mazatrol PC Fusion 640 T Dilengkapi dengan: berbagai holder alat

Kondisi: bekas, Tahun pembuatan: 2004, Ukuran palet 630 x 500 mm Sumbu X - 630 mm Sumbu Y - 765 mm Sumbu Z - 510 mm Sumbu A - 0,001 derajat. (+30/-120 derajat) Sumbu C - 0,001 derajat. (360 derajat) Putaran spindle 35-12000 rpm Kone spindle ISO 40 Kontrol: Mazatrol 640 M 5X Dilengkapi dengan: Cairan pendingin melalui spindle (20 bar) Magasin alat dengan 120 posisi Dedpfjxdfiijx Abheun

Kondisi: bekas, Tahun pembuatan: 1999, de1 Duedpfx Aeuimaxebhjn

Kondisi: bekas, Tahun pembuatan: 2003, Panjang putar 1000 mm Lubang spindel 65 mm Diameter putar maksimum 300 mm Putaran spindel 4000 rpm Putaran alat putar 4000 rpm Revolver dengan 12 posisi Kontrol: Mazatrol 640 T Nexus Dilengkapi dengan: 3 pcs alat putar Duedpfox N A I Nox Abhen Berbagai jenis dudukan alat

Kondisi: bekas, Tahun pembuatan: 2016, The Mazak VTC 800 series is a range of high-performance, large-format 5-axis machining centers for large workpieces, renowned for their high precision and rigidity. They are ideally suited for the aerospace, energy, and heavy machinery sectors, featuring integrated spindles, fast tool changes, and enabling efficient complete machining. Accessories: - Tool magazine for 30 tools - Tool length measurement - Tool breakage detection - Factory preparation for chip conveyor (left) - Magazine (HSK) for 155 tools - Air-blow device at the workpiece - Signal light (end of machining: yellow) - Additional: work area lighting - Coolant gun - Air-blow device through spindle - Preparation for 70 bar coolant, including interface for high-pressure system - Automatic opening/closing of operator door - Mazak Monitoring System B RMP 60 (only H/V) - Collision monitoring system by Brankamp - 2 pcs Renishaw TS27R tool setting device - NC rotary table - Clamping device for vertical use of NC rotary table - Center partition for pendulum machining - 3D model of work area in STEP format - 5-axis milling technology - Knall compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l) - High-pressure cooling 70 bar, 7 pressure stages - Swarf conveyor with hinge belt design - Additional M-codes: 1 set = 2 M-codes - Preparation for dual extraction system (mechanical connector) Ø 198 mm - Transformer for European market - 1 set of manuals in electronic form on CD - 1 set of calibration tools - Foundation set (anchor bolts + plates) - MAZAK standard color - Work area lighting Additionally included: - Extraction unit AirFresh FMN V12 (installed on both sides and linked with door sensor) - Clamping device for vertical operation of rotary table - 2x Renishaw TS27R integrable tool setting devices Spare parts: - Motor Y-axis tool magazine - Motor linear axis shifter Duedpfxex Idwio Abhsn - Motor rotary axis shifter - Cylinder for tilting unit Dimensions and technical data: - Width: 3500 mm - Length: 820 mm - X-axis travel: 3000 mm - Y-axis travel: 800 mm - Z-axis travel: 720 mm - Min. distance spindle nose to table top: 140 mm - Max. distance spindle nose to table top: 860 mm - Max. table load: 2500 kgf - B-axis: ±110 degrees - Main spindle taper: ISO 40, collapses under load, 155 tools HSK - Max. spindle speed: 18,000 rpm - Min. spindle speed: 35 rpm - Rated power (100% duty cycle): 33.0 kW - Rapid traverse speed X-Y & Z axis: 50 m/min - Table width: 3500 mm - Table length: 820 mm - T-slot width: 18 mm - Number of T-slots: 7 - T-slot spacing: 100 mm - Table height from floor: 870 mm - Tool changer, standard tool stations: 30 - Optional tool stations: 48 - Tool selection method: shortest path - Tool shank: ISO 40 - With occupied neighboring stations: 80 mm - With free neighboring stations: 130 mm - Max. tool weight: 8 kgf - Total weight of all magazine tools: 150 kgf - Max. tool length: 350 mm - Tool change time (chip-to-chip): 4.7 s - Connection: 400 V / 50/60 Hz - Air pressure: 5 – 9 bar - Air consumption: 260 l/min - Tank capacity: 500 l - Dimensions (H x L x W): 3376 x 5480 x 4051 mm - Approx. weight: 16,300 kg - Color: grey / black

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Data Umum Berat mesin: 6.800 kg Tinggi mesin: 2.808 mm Dimensi Panjang mesin: 2.929 mm Meja Beban meja: 1.200 kg Penggerak Utama Jumlah sumbu: 3 Kecepatan spindle: 12.000 RPM Daya motor spindle: 18,5 kW Pergerakan Gerak sumbu X: 1.050 mm Gerak sumbu Z: 510 mm Gerak sumbu Y: 530 mm Peralatan Bobot maksimum alat: 8 kg Dedpfsx E Edxsx Abhsun Pusat pemesinan vertikal 3-sumbu Mazak VCS 530C ini diproduksi pada tahun 2014. Mesin ini dilengkapi ukuran meja 1.300x550 mm, perjalanan sumbu X/Y/Z sepanjang 1.050/530/510 mm, dan kecepatan spindle maksimum 12.000 rpm. Mesin ini mampu menahan beban meja hingga 1.200 kg dan memiliki majalah alat dengan kapasitas 30 alat serta waktu pergantian alat cepat 2,8 detik. Manfaatkan kesempatan ini untuk membeli Mazak VCS 530C vertical machining centre. Silakan hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi: Milling

Kondisi: siap digunakan (bekas), Mazak tool changer for Mazak machine H 400, used, normal signs of wear, 100% functional, scope of delivery as per photos Duedpfx Aboi Eb Drjhjn

Kondisi: siap digunakan (bekas), Mazak tool changer for Mazak machine H 400, used, normal signs of wear, 100% functional, scope of delivery as per photos Duedpfoi Eb Dnsx Abhjn

Kondisi: siap digunakan (bekas), Mazak Mazatrol Cam M-2 control panel YM2B BN110B367, used, heavy signs of use, 100% functional, scope of delivery as per photos Dusdji Eb Dkspfx Abhon

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Allgemeine Daten Abmessungen Breite 1780 mm Abmessungen Tiefe 2765 mm Dusdpfxjx D Rmts Abhon Abmessungen Höhe 1840 mm Maschinengewicht 5100 kg Steuerung Fabrikat MAZATROL Hauptantrieb Spindeldrehzahlbereich 5000 min⁻¹ Spindelmotorleistung 26 kW Anzahl Achsen 3 Verfahrwege X-Achse Verfahrweg 230 mm Z-Achse Verfahrweg 575 mm Revolver Anzahl Revolver 1 Werkzeuge Anzahl Stationen 12 Diese 3-Achsen-Drehmaschine Mazak Quick Turn NEXUS 200MS wurde 2005 gebaut. Sie verfügt über einen maximalen Drehdurchmesser von 380 mm, eine Hauptspindeldrehzahl bis zu 5000 min⁻¹ sowie eine Gegenspindeldrehzahl von 6000 min⁻¹. Die Maschine ist mit einer Mazatrol 640T Nexus CNC-Steuerung ausgestattet und zeichnet sich durch eine robuste Bauweise mit Abmessungen von 2765x1780x1840 mm und einem Gewicht von 5100 kg aus. Wenn Sie hochwertige Drehbearbeitung suchen, ist die Mazak Quick Turn NEXUS 200MS eine ausgezeichnete Wahl. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Drehen

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), de Duodpfxsx D N Ipo Abhen

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 163341, Manufacturing origin UK Voltage 400V 3-phase AC, 50/60Hz, max 58A Dimensions 200x260x250 cm Net machine weight 5010 kg TECHNICAL SPECIFICATIONS Capabilities Table size: length 900 mm / depth 410 mm X axis: 560 mm Y axis: 410 mm Z axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle centre to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min. rating): 18.5 kW Duedpfew T Tp Rjx Abhsn Power (10 min. rating): 15 kW Power (30 min. rating): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Quantity: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: free station number selection; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (Ø 125 mm with adjacent stations empty) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle chiller tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min The technical data is provided without obligation and subject to errors or omissions.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Unit Kontrol Merek: SIEMENS Model: 840D Penggerak Utama Jumlah sumbu: 5 Dedpex D I A Esfx Abhsun Mazak VTC 800/30SR 5-sumbu ini diproduksi pada tahun 2014, dilengkapi dengan ATC 155 alat yang tangguh, pendingin spindle internal tekanan 15 bar, dan robot KUKA untuk otomasi yang lebih tinggi. Termasuk paket teknologi untuk milling 5-sumbu dan antarmuka robot, sangat cocok untuk pekerjaan pemesinan yang kompleks. Jika Anda mencari mesin milling berkualitas tinggi, pertimbangkan Mazak VTC 800/30SR yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Milling