Beli Mazak Sqt bekas (334)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 1.427 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 500 mm, diameter pembubutan: 380 mm, daya motor spindle: 26.000 W, kecepatan spindel (min.): 35 rpm, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 91 mm, jarak pergerakan sumbu X: 234 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 21 m/menit, pergerakan cepat sumbu Z: 33 m/menit, torsi: 465 Nm, saluran batang: 80 mm, berat benda kerja (maks.): 400 kg, tinggi total: 1.857 mm, panjang total: 6.650 mm, lebar total: 1.845 mm, Diameter batang (maks.): 80 mm, berat keseluruhan: 5.950 kg, Perlengkapan: dokumentasi / manual, Mazak QUICK TURN 250MSY – Complete Package incl. Bar Feeder – As New (YOM 2024) Description & Reason for Sale: For sale is a state-of-the-art Mazak QT 250MSY (year of manufacture: end of 2024) in absolutely full configuration. The machine is optimized for fully automated complete machining from bar and is offered including an extensive, high-quality package of tooling and workholding equipment. After commissioning, we decided to sell the machine again as the control system’s operating concept differs significantly from that of our existing machine park and does not optimally fit our internal programming workflow. As we pursue a unified operating platform, we are offering this powerhouse for immediate sale. The Mazak is currently still integrated in our production process. Please note that operating hours may slightly increase up until the time of sale. Viewing under power and chip is possible at short notice by prior appointment. Technical Highlights: - Control: MAZATROL SmoothG (19" touchscreen) with Intelligent Safety Shield & collision protection. - Working area: Max. turning diameter 380 mm, turning length 500 mm, Y-axis travel 100 mm. - Main spindle: 26 kW, max. 4,000 rpm, C-axis (0.0001°), spindle bore 91 mm. - Sub spindle: 11 kW, max. 6,000 rpm, for fully automatic rear-side machining. - Turret: 12 positions (VDI), all driven (5.5 kW, 6,000 rpm). - Dynamics: Rapid traverse X/Y/Z: 30 / 10 / 33 m/min. Iodpfx Aajx Tctte Notb Included Accessories & Automation: - Bar feeder: TOP Automazioni (Magic) short bar loader. - Workholding: 10” 3-jaw power chuck (main spindle), collet system (main spindle), collets Ø (25, 35, 40, 45, 50, 60, 65, 75, 80) - Various draw tubes and sleeves for different diameters. (16, 17, 21, 26, 31, 36, 41, 46, 51, 56, 61, 66, 71, 76) - Tool package: * Mazak standard toolholder package. - Driven WTO angle head for main and sub spindle. - 4-way tool holder, boring bar holder (main/sub), and 4-way boring bar block. - Additional options: Tool Eye (auto tool measurement), parts catcher, 15 bar high-pressure coolant, Mayfran chip conveyor (side discharge), and engraving function. Technical Data: - Year of manufacture: End of 2024 - Max. turning diameter: 380 mm - Max. turning length: 500 mm - Spindle bore: 80 mm (bar) - Main spindle power: 26 kW - Torque: 465 Nm - Weight: approx. 5,950 kg - Dimensions: 6650 x 1,845 x 1,857 mm (incl. bar feeder & chip conveyor)

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.500 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan rotasi (maks.): 4.000 rpm, berat keseluruhan: 14.400 kg, Mazak Integrex 300 3 ST Kontrol - Mazatrol 640 mt pro 2 spindel 1500 mm Tanpa CE 2005/05 dalam kondisi sangat baik Iedpjx Rkvqefx Aa Notb Mesin bubut turret.....10 alat ATC.....40 alat Diameter ayun maksimum 33,5″ 850,9 mm Diameter ayun maksimum (penggunaan sumbu Y) 26″ – 33,5″ 660,4 mm – 850,9 mm Diameter ayun maksimum di atas lintasan silang 33,5″ 850,9 mm Diameter ayun maksimum di atas turret bawah 16,5″ 419,1 mm Berlokasi di Israel dalam kondisi hidup dan siap inspeksi. CNC ini dibuat di Jepang dan memerlukan izin MATI.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Pusat Pemesinan CNC Horizontal MAZAK HCN 5000 II Tahun Pembuatan: 2008/10 Majalah alat: 40 alat Kecepatan spindle: 18.000 rpm Meja putar NC (sumbu keempat / 0,001 x 360.000 posisi) Data Teknis: Diameter benda kerja maks.: 800 mm Tinggi benda kerja maks.: 1000 mm Pergerakan sumbu X: 730 mm Pergerakan sumbu Y: 730 mm Pergerakan sumbu Z: 740 mm Jarak dari pusat spindle ke pusat palet min.: 70 mm Jarak dari pusat spindle ke pusat palet maks.: 810 mm Jarak dari pusat spindle ke permukaan palet min.: 100 mm Jarak dari pusat spindle ke permukaan palet maks.: 830 mm Tipe holder alat: SK40 Majalah alat: 40 alat Kecepatan spindle: 18.000 rpm Itedox Hgh Iepfx Aa Nsb Area kerja palet: 500 x 500 mm Meja putar NC (sumbu keempat / 0,001 x 360.000 posisi)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, MAZAK VCN 410A Pembagi Nikken 5AX-201, 5 sumbu berjalan terus menerus kecuali kemiringan yang diatur dengan remote Nikken x21 Diameter meja: 200 mm Lintasan: 560 x 410 x 510 mm Meja: 900 x 410 mm Majalah alat: 30 posisi Itjdpfxexvra So Aa Nsb Spindle: 12.000 rpm Konveyor serpihan

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, The machine is in good condition. It is powered and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: --> see picture Machine No.: 252 153 Control unit: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Itodpfxei Ik Hks Aa Neb Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Driven tool speed: 4,000 rpm Driven tool power: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine is equipped as standard with the 'Relocation Detector.' For recommissioning, the machine must be unlocked by Mazak. Options: - Y-axis - Gantry loader GL200F - Air blow device for workpiece transfer - Chip conveyor, rear discharge - Cylinder and polar interpolation (EIA) - High-pressure and return pump (original pumps included) Accessories HD 1: - Power chuck Kitagawa B-210 - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Power chuck Kitagawa B-210 - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Price: EXW (loaded onto provided truck) Furthermore, we offer a set of tool holders for this machine (see last picture). Note: separate item, not included in the machine offer. Comprising: Static holders: 2 pcs. external turning tool holders 13 pcs. facing tool holders 3 pcs. parting holders 5 pcs. boring bar holders Ø 32 2 pcs. boring bar holders Ø 40 8 pcs. boring bar holders Ø 50 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling head SK40 8 pcs. radial drilling and milling head SK40 3 pcs. radial drilling and milling head ER40 5 pcs. swivel head The original value of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (incoterms EXW, excluding transport)

Kondisi: baik (bekas), Tahun pembuatan: 2005, Werkzeugaufnahme BT 40, 12.000 U/min, 60 Werkzeugplätze im Werkzeugwechsler, 70 bar IKZ (Innenkühlung), Renishaw OMI-2 Laser. Itodpfxjwbaqlo Aa Nsb Manuell gezeigte Teile sind nicht im Lieferumfang enthalten.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Panjang pembubutan: 1.500 mm Diameter pembubutan maksimum: 670 mm Kecepatan putar maksimum spindle utama: 5.000 rpm Kecepatan putar maksimum spindle sekunder: 5.000 rpm Tipe holder alat unit milling: CAPTO C6 Termasuk chuck HAINBUCH dengan sistem pertukaran Termasuk pengisi batang otomatis Termasuk konveyor serpihan KNOLL / filter sabuk Termasuk berbagai alat Itsdpfx Aox Nm Uasa Njb Termasuk dokumentasi lengkap

Tahun pembuatan: 2021, jam operasional: 3.415 h, Kondisi: siap digunakan (bekas), Technische Daten Maschinengewicht 4.500 kg Steuerung Steuerungsmarke MAZATROL Hauptantrieb Achsenanzahl 2 Verfahrwege X-Achse 425 mm Ijdpox Nr T Iefx Aa Njtb Z-Achse 600 mm Zusätzliche Ausstattung Spannzangenfutter; 2x 3-Backen-Futter Mit Stangenlader Diese Mazak QTC 100 MSL Horizontal-Drehmaschine wurde 2021 gebaut. Sie eignet sich ideal für vielseitige Zerspanungsaufgaben. Nutzen Sie die Gelegenheit, diese Mazak QTC 100 MSL Horizontal-Drehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Drehen

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Hauptantrieb Spindelmotorleistung 22 kW Achsenanzahl 3 Verfahrwege X-Achse Eilgang 30.500 mm/min Z-Achse Eilgang 33.000 mm/min Revolver Itsdpsx Nr S Dsfx Aa Nsb Anzahl der Revolver 2 Anzahl der Werkzeugplätze 12 Diese 3-Achsen Mazak Multiplex 6200 wurde 1999 gefertigt und verfügt über zwei Spindeln mit einer maximalen Drehzahl von 5.000 U/min sowie einer Antriebsleistung von jeweils 22/15 kW. Die Maschine ist mit einem ABB-Roboter ausgestattet und besitzt auf der rechten und linken Seite jeweils einen Revolver mit 12 Werkzeugplätzen. Die Eilganggeschwindigkeiten betragen 30,5 m/min auf der X-Achse und 33 m/min auf der Z-Achse. Wenn Sie auf der Suche nach einer hochwertigen Drehmaschine sind, empfehlen wir Ihnen die Mazak Multiplex 6200, die wir aktuell zum Verkauf anbieten. Kontaktieren Sie uns gern für weitere Informationen. Anwendungsbereiche Drehen

Kondisi: bekas, Tahun pembuatan: 2008, en-GB: Mazatrol Matrix CAM PC workstation with full 5-axis licence (incl. PCI card & PC) Description: For sale is a complete, ready-to-use PC workstation equipped with the powerful Mazatrol Matrix CAM software. The licence is perpetual and hardware-bound via a PCI card. This system was previously used on 5-axis machines (Integrex e-1060 V8/II) and includes rare high-end options. The PC has been freshly set up and is fully functional. Ideal for companies with an older Mazak machine fleet looking for an independent programming solution. Licence & Options Details: The following key options are enabled and active: (see pictures) 40 SIMULTANEOUS 5 AXIS (simultaneous 5-axis machining) 49 TILTED WORKING PLANE 55 TOOL CENTER POINT CONTROL Itsdox Sq Nmepfx Aa Nob Other basic options such as EIA, Smoothing Control, Spiral, etc. (see photo of the options menu) Scope of delivery: PC system: Windows 7 Pro x86 (32 Bit), Intel i5-3470 3.2 GHz, 4 GB RAM, AMD Radeon HD7570 GPU. Fully functional computer with installed operating system (Windows 7 Pro x86) and pre-installed software. PCI licence card: The physical licence hardware, installed in the PC. Original packaging: The software’s original packaging as shown. Documentation: Manual, original CDs/data carriers fr-FR: Station PC Mazatrol Matrix CAM avec licence complète 5 axes (incl. carte PCI & PC) Description : À vendre, un poste PC complet prêt à l’emploi avec le puissant logiciel Mazatrol Matrix CAM. La licence est permanente et liée au matériel via une carte PCI. Le système a été utilisé sur des machines 5 axes (Integrex e-1060 V8/II) et comprend des options haut de gamme rares. Le PC a été fraîchement réinstallé et fonctionne parfaitement. Idéal pour les ateliers disposant d’un parc Mazak plus ancien souhaitant une solution de programmation indépendante. Détails licence & options : Les options suivantes sont activées : (voir photos) 40 SIMULTANEOUS 5 AXIS (usinage 5 axes simultanés) 49 TILTED WORKING PLANE (plan d’usinage incliné) 55 TOOL CENTER POINT CONTROL (contrôle du point central outil) Autres options de base comme EIA, Smoothing Control, Spiral, etc. (voir photo du menu des options) Inclus : PC : Windows 7 Pro x86 (32 bits), Intel i5-3470 3,2 GHz, 4 Go RAM, AMD Radeon HD7570 GPU. PC fonctionnel, système d’exploitation Windows 7 Pro_x86 installé, logiciel préinstallé. Carte licence PCI : carte hardware de licence, installée dans le PC. Emballage d’origine du logiciel tel que présenté. Documentation : Manuel, CD/données d’origine es-ES: Puesto PC Mazatrol Matrix CAM con licencia 5 ejes completa (incl. tarjeta PCI y PC) Descripción: A la venta un puesto PC completo, listo para usar, con el potente software Mazatrol Matrix CAM. La licencia es permanente y está vinculada al hardware mediante tarjeta PCI. El sistema se utilizó en máquinas de 5 ejes (Integrex e-1060 V8/II) y contiene opciones avanzadas poco comunes. El PC ha sido reinstalado recientemente y está operativo. Ideal para talleres con un parque de máquinas Mazak antiguo que buscan una solución de programación independiente. Detalles de licencia y opciones: Las siguientes opciones clave están activas: (ver imágenes) 40 SIMULTANEOUS 5 AXIS (mecanizado 5 ejes simultáneo) 49 TILTED WORKING PLANE (plano de trabajo inclinado) 55 TOOL CENTER POINT CONTROL (control punto central de herramienta) Otras opciones base como EIA, Smoothing Control, Spiral, etc. (ver foto del menú de opciones) Contenido: PC: Windows 7 Pro x86 (32 bits), Intel i5-3470

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, MAZAK QUICK TURN NEXUS 200-II MY Diameter pemesinan maks.: 380 mm Panjang pemesinan maks.: 538 mm Kecepatan milling maks.: 4.500 rpm Kecepatan spindle maks.: 5.000 rpm Diameter batang maks.: 65 mm Mesin dilengkapi dengan: - Kontrol CNC Mazatrol Matrix - Chuck tiga rahang KITAGAWA BB-208, diameter 210 mm - Tool Eye - Sumbu C - Sumbu Y - Antarmuka untuk magazine pemuat batang - Penangkap bagian otomatis Itjdpfx Ajxlzp Ioa Neb - Tailstock NC - Pompa pendingin berdaya tinggi - Konveyor serbuk MAYFRAN - 8 pcs dudukan alat tetap - 2 pcs dudukan alat penggerak

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, MAZAK QUICK TURN NEXUS 250-II MY Diameter pemesinan maks.: 380 mm Panjang pemesinan maks.: 500 mm Kecepatan milling maks.: 4.500 rpm Kecepatan spindle maks.: 4.000 rpm Itjdpfxox Nn Uuj Aa Nsb Diameter batang maks.: 74 mm Mesin dilengkapi dengan: - Kontrol CNC Mazatrol Matrix 2 - Chuck tiga rahang KITAGAWA BB-210, diameter 254 mm - Tool Eye - Sumbu C - Sumbu Y - Penangkap bagian otomatis - Tailstock NC - Pompa pendingin berkekuatan tinggi - Konveyor serpihan MAYFRAN - 8 unit dudukan alat tetap - 2 unit dudukan alat penggerak

Kondisi: baik (bekas), Tahun pembuatan: 2004, panjang pembubutan: 2.000 mm, Model: E-650H Kontrol: Mazatrol 640M Pro Tahun: 2004 Jarak Antara Senter: 2000 mm Diameter Ayunan di Atas Tempat Tidur: 905 mm Mesin Dilengkapi Dengan: Sumbu C Sumbu Y Perkakas Hidup/Pengefraisan Sumbu B Chuck Hidrolik 800 mm Steady Manual 375 mm Steady Terbuka 600 mm Filter Kabut Udara Itjdpfx Aaexvyq Eo Nsb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 32.790 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.032 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 750 mm, beban meja: 3.000 kg, kecepatan spindel (maks.): 6.000 rpm, DETAIL TEKNIS Perjalanan sumbu-X: 2.032 mm Perjalanan sumbu-Y: 750 mm Perjalanan sumbu-Z: 750 mm Ketinggian benda kerja maks.: 870 mm Beban meja/benda kerja maks.: 3.000 kg Lebar meja: 800 mm Panjang meja: 2.240 mm Isdpfx Aaox Ng Nwe Notb Putaran spindle: 40 - 6.000 rpm Taper spindle: SK 50 Daya standar spindle: 18,5 kW Torsi standar: 759 Nm Varian daya spindle: 26 kW Varian torsi: 1.067 Nm DETAIL MESIN Kontrol: MAZATROL Dimensi & Berat Dimensi (P x L x T): 5.685 mm x 4.096 mm Berat: 14.000 kg Jam operasional: 32.790 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 16.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 720 mm, tinggi total: 3.376 mm, beban meja: 2.500 kg, berat keseluruhan: 16.300 kg, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 33.000 W, berat alat: 8.000 g, panjang produk (maks.): 5.480 mm, jumlah sumbu: 5, This Mazak VTC 800/30 SR 4-axis vertical machining center was manufactured in 2016 and stands out for its robust construction. It features a table width of 3,500 mm and a length of 820 mm. The spindle offers a maximum speed of 18,000 rpm, with rapid traverse rates of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer offering 30 stations and supports a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Minimum distance spindle nose to table: 140 mm • Maximum distance spindle nose to table: 860 mm • Working spindle • Tapered tool holder (40° taper; 155 HSK tools not included if ordered) • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Work table • T-slot width: 18 mm • Number of T-slots: 7 • T-slot pitch: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool holder: 40° steep taper • With adjacent locations occupied: 80 mm • With adjacent locations free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s Isdpfox Nkp Ujx Aa Njtb • Utilities • Supply voltage: 380/400/415 V +10% • Supply frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank capacity: 500 l Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Bracket for vertical rotary table operation • 2x Renishaw TS27R integrated tool presetters • Spare parts: • Y-axis motor for tool magazine • Linear axis drive motor • Motor for rotary axis drive • Cylinder for tilting unit

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1998, Fungsionalitas: fungsi terbatas, MAZAK V 414-22 B Pusat pemesinan vertikal sebagai donor suku cadang Dengan penukar alat otomatis Kontrol: Mazatrol dialog kontrol M-Plus Jam operasi: sekitar 54.000 jam Kondisi: terawat, kondisi baik Dokumentasi – layanan tersedia Dokumentasi – lengkap Data teknis: Ukuran meja: 900x410 mm Kapasitas maksimal meja: 500 kg Pergerakan sumbu X: 500 mm Pergerakan sumbu Y: 400 mm Pergerakan sumbu Z: 400 mm Kecepatan pergerakan X / Y / Z: 26/26/20 m/menit Spindel: DIN 69871 / SK40 Ijdpfx Aswu R Dpsa Njtb Kecepatan spindel: 50 – 7.000 rpm Jumlah alat di majalah: 22 Berat benda kerja horizontal: 100 kg Aksesori atas permintaan: Berbagai holder alat SK40 Berbagai cutter Sandvik Ragum mekanis atau hidraulis Sistem pengukuran benda kerja Renishaw

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 380 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 230 mm, jarak lintasan sumbu Y: 575 mm, daya: 65 kW (88,38 hp), For sale is a CNC lathe from Mazak, model Quickturn Nexus 200-II MS. The machine is in good condition and ready for immediate use after installation. Technical specifications: Year of manufacture: 2015 Main spindle operating hours: 10,379 h Sub spindle operating hours: 6,741 h Control system: MAZATROL Matrix Nexus 2 Itsdot R S Daepfx Aa Njb Main spindle chuck diameter: 8" Sub spindle chuck size: 6" Swing diameter: 675 mm Max. machining diameter: 380 mm Max. bar capacity main spindle: 65 mm Max. main spindle speed: 5,000 rpm Motor power (30 min rating): 26 kW Max. sub spindle speed: 6,000 rpm Power (40% duty cycle): 11 kW Tool stations: 12 Driven tool stations: 12 X-axis travel: 230 mm Z-axis travel: 575 mm Dimensions: 2,765 x 1,780 mm Weight: 4,900 kg The offer does not include any accessories such as tools or tool holders. Loading and shipping throughout Europe can be arranged upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 2013, diameter pembubutan: 380 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 575 mm, daya: 26 kW (35,35 hp), For sale: CNC lathe Mazak Quickturn Nexus 200-II MS. The machine is in good condition and ready for immediate operation after installation. The machine is currently connected at the customer’s site and can be inspected under power. Technical Specifications: Year of manufacture: 2013 Main spindle hours: 10,421 h Sub spindle hours: 4,262 h Control: MAZATROL Matrix Nexus Main spindle chuck diameter: 8" Sub spindle chuck size: 6" Swing diameter: 675 mm Max. machining diameter: 380 mm Max. bar diameter main spindle: 65 mm Max. spindle speed main spindle: 5,000 rpm Motor power 30 min duty: 26 kW Max. spindle speed sub spindle: 6,000 rpm Power (40% ED): 11 kW Tool stations: 12 Driven tool stations: 12 Travel distance X-axis: 230 mm Travel distance Z-axis: 575 mm Itedpfxstqud As Aa Njb Dimensions: 2,765 x 1,780 mm Weight: 4,900 kg Offer does not include accessories such as tools or tool holders. Loading and shipping throughout Europe can be arranged upon request. All prices are subject to VAT. Inspection by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, daya laser: 6.000 W, berat keseluruhan: 15.500 kg, jumlah sumbu: 3, This 3-axis Mazak OPT IPLEX 3015 Fiber II was manufactured in 2016. It features a 6 kW fiber laser, Mazatrol Preview 3 control, and a working area of 3050 × 1525 mm. Equipped with advanced features such as automatic nozzle changer, automatic focus positioning, and intelligent monitoring functions, it ensures precise and efficient workflows. Take the opportunity to purchase this Mazak OPT IPLEX 3015 Fiber II fiber laser cutting machine. Contact us for further details. • Operating hours: 53,000 h Itedpox I Sm Ejfx Aa Nob • Controller: MAZATROL Preview 3 • Mazak control unit: Included • Working area: 3050 × 1525 mm • Resonator: IPG • Cutting head: Multi-Control Cutting Head 2.0 (upgraded) • Intelligent Setup Function (ISF) • Automatic nozzle changer (8 holders) • Automatic nozzle cleaning • Automatic focus positioning • Beam diameter adjustment function • Intelligent Monitoring Function (IMF) • Pierce detection • Burn detection • Plasma detection • Protective window sensor • Condensation lens sensor • Circuit diagram: DD628101002 • Rated power: 57 kVA • Power supply: 3AC 380 V, 50/60 Hz • Auxiliary voltages: AC 100 V / DC 24 V Additional Equipment • Chip conveyor: Yes • Dust collector: Donaldson • Chiller: IPG • Workpiece lifter: Yes

Kondisi: bekas, Tahun pembuatan: 2017, Neue Spindel 2025-08 Jährlicher Service durch Mazak Servicecenter. Inklusive Stangenlader Super 80 Max. Umlaufdurchmesser Ø 658 mm Umlaufdurchmesser über Kreuzsupport Ø 658 mm Umlaufdurchmesser bei aktiver Y-Achse Ø 658 mm Max. Drehdurchmesser Ø 658 mm Max. Drehdurchmesser ab Stange Ø 51 mm (Option Ø 65) Max. Werkstücklänge 1011 mm X-Achse: 615 mm Y-Achse: +/-130 mm Z-Achse: 1077 mm B-Achse: 0,0001° / 240° Spindel 1 Spindelaufnahme JIS A2-6 Spindelbohrung 76 mm Durchgangsbohrung 51 mm (Option Ø 65) Spindelmotor AC 22 kW 40% ED Drehzahlbereich 35-5000 U/min Anzahl der Drehzahlbereiche Direktantrieb Max. Drehmoment 467 Nm 25% ED Max. Werkstückgewicht inkl. Spannfutter 300 kg Spindelmitte über Boden 1235 mm Spindel 2 Spindelaufnahme JIS A2-6 Spindelbohrung 76 mm Durchgangsbohrung Nicht applizierbar (Option Ø 65) Spindelmotor AC 18,5 kW 40% ED Drehzahlbereich 33-5000 U/min Anzahl der Drehzahlbereiche Direktantrieb Max. Drehmoment 325 Nm 40% ED Max. Werkstückgewicht inkl. Spannfutter 300 kg Spindelmitte über Boden 1235 mm C-Achse 1 Typ Direktantrieb Eilgang 555 U/min Arbeitsvorschub 1-5000 Grad/min Min. programmierbare Schrittweite 0,0001 Grad C-Achse 2 Typ Direktantrieb Eilgang 555 U/min Arbeitsvorschub 1-5000 Grad/min Min. programmierbare Schrittweite 0,0001 Grad W-Achse Verfahrweg 1066 Eilgang 30 m/min B-Achse B-Ausschlag 240 Grad Max. Bearbeitungsvorschub (ISO) 40 U/min Min. programmierbare Schrittweite 0,0001 Grad Werkzeughaltertyp: Werkzeugwechsler Werkzeugschafthalter: 25 x 25 mm Werkzeugwechselzeit, Werkzeug zu Werkzeug: 1,3 Sekunden Span-zu-Span-Zeit, durchschnittlich: 8 Sekunden Werkzeugaufnahme für angetriebene Werkzeuge: Capto C6 Werkzeugaufnahme für Drehwerkzeuge: Capto C6 Max. Werkzeuggewicht: 12 kg Max. Werkzeuglänge: 400 mm Spannkraft für Werkzeug (Capto C6): 33 kN Werkzeugmagazin: Anzahl der Werkzeugplätze: 36 Stück Max. Werkzeugdurchmesser: 90 mm Max. Werkzeugdurchmesser bei leerem Platz davor und danach: 125 mm Max. Werkzeuglänge: 400 mm Max. Werkzeuggewicht: 12 kg Max. Werkzeugdrehmoment: 9,8 Nm Sonstiges: Länge: 3990/4910 mm Breite: 2800 mm Höhe: 2720 mm Gewicht: 13100/16600 kg Leistungsbedarf, kontinuierlich: 72,34 kVA Iodpfx Aex Hfl Eja Nstb Druckluftbedarf, min.: 5 kg/cm², 410 Liter/min Werkzeugmagazin: 36 Werkzeuge Standardausstattung: B-Achse Capto C6 ATC Auto Recovery Automatische Ein/Aus-Schaltung, Heizplan 19“-LCD-Touchscreen Mazak-Werkzeugidentifikationssystem inkl. 10 ID-Chips (für Capto C6) Messarm zur Werkzeuglängeneinstellung, automatische Kompensation und Bruchüberwachung 8“ Spannfutter Typ: Kitagawa B208A6 8“ Spannfutter Typ: Kitagawa B208A6 Kühlmitteltank Kühldruck für oberen Revolver: max. 5 bar, 23 l/min Satz Anleitungen (digital) Smooth Standard Software: Mazacc 2D Software (shape comp) Mazacc 2D Software für rotierende Achsen (shape comp) Mazacc 3D High Speed Software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA-Programmierung: Dreh- und Frässpindelstart asynchron Synchronisiertes Gewindeschneiden mit angetriebenen Werkzeugen Makro-Unterbrechung ermöglicht ereignisgesteuerte ISO/EIA-Programme Makroprogrammierung mit 600 zusätzlichen Variablenpaaren für ISO/EIA Helixinterpolation für ISO/EIA Koordinatenrotation mit G68 für ISO/EIA Polarkoordinaten, G122 für ISO/EIA Synchronisierte Interpolation X-C-Achse G12.1 für ISO/EIA Koordinatensysteme G54

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Table length: 3050 mm Table width: 1525 mm Number of torch heads: 1 Control system: Mazatrol Preview M Operating hours: 31,400 h Laser power: 4000 Watts Max. table load: 915 kg Max. workpiece dimensions (LxWxH): 3050 x 1545 x 25 mm Max. sheet thickness: 25 mm Material support height: 375 mm Table height above floor: 900 mm Rapid traverse X / Y / Z axis: 24 / 24 / 25 m/min Machine weight: approx. 14.2 t Required floor space: approx. 8 x 2.9 x 2.6 m Well-maintained CO2 laser cutting machine with travel paths X/Y/Z = 3260 x 1545 x 430 mm, max. working area 1525 x 3050 mm, with a 3rd rotary NC axis for pipe processing; Z-axis travel is 430 mm as a result. Includes gantry loader with vacuum lifter for feeding new sheets, as well as lifting unit for removal of finished sheets and control cabinet with operating elements. Also features a tapping unit with drill magazine, rearward-traveling protective hood, intelligent nozzle change magazine, Donaldson extraction system, cooling unit, and further technical details available on request. The gantry loader uses a vacuum lifter to pick up new sheets, automatically takes the cut sheet with it during the process, places the new sheet, moves on to the finished sheet stack table, and deposits it there – see video 2. The extraction unit, cooling system, and transformer are mounted on the platform above the machine. Mazatrol Preview M control system with color TFT, 64-bit CPU, 20 GB hard disk, programming in EIA/ISO format. This is a used machine, therefore we sell under exclusion of any guarantee/warranty. Itjdpjx H Tuujfx Aa Nob CERTIFIED DEALER ON THE MASCHINENSUCHER PLATFORM AND STOCK-HOLDING DEALER.

Kondisi: bekas, Tahun pembuatan: 2016, The Mazak VTC 800 series is a range of high-performance, large-format 5-axis machining centers for large workpieces, renowned for their high precision and rigidity. They are ideally suited for the aerospace, energy, and heavy machinery sectors, featuring integrated spindles, fast tool changes, and enabling efficient complete machining. Accessories: - Tool magazine for 30 tools - Tool length measurement - Tool breakage detection - Factory preparation for chip conveyor (left) - Magazine (HSK) for 155 tools - Air-blow device at the workpiece - Signal light (end of machining: yellow) - Additional: work area lighting - Coolant gun - Air-blow device through spindle - Preparation for 70 bar coolant, including interface for high-pressure system - Automatic opening/closing of operator door - Mazak Monitoring System B RMP 60 (only H/V) - Collision monitoring system by Brankamp - 2 pcs Renishaw TS27R tool setting device - NC rotary table - Clamping device for vertical use of NC rotary table - Center partition for pendulum machining - 3D model of work area in STEP format - 5-axis milling technology - Knall compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l) - High-pressure cooling 70 bar, 7 pressure stages - Swarf conveyor with hinge belt design - Additional M-codes: 1 set = 2 M-codes - Preparation for dual extraction system (mechanical connector) Ø 198 mm - Transformer for European market Itjdpfx Aaox Idwij Neb - 1 set of manuals in electronic form on CD - 1 set of calibration tools - Foundation set (anchor bolts + plates) - MAZAK standard color - Work area lighting Additionally included: - Extraction unit AirFresh FMN V12 (installed on both sides and linked with door sensor) - Clamping device for vertical operation of rotary table - 2x Renishaw TS27R integrable tool setting devices Spare parts: - Motor Y-axis tool magazine - Motor linear axis shifter - Motor rotary axis shifter - Cylinder for tilting unit Dimensions and technical data: - Width: 3500 mm - Length: 820 mm - X-axis travel: 3000 mm - Y-axis travel: 800 mm - Z-axis travel: 720 mm - Min. distance spindle nose to table top: 140 mm - Max. distance spindle nose to table top: 860 mm - Max. table load: 2500 kgf - B-axis: ±110 degrees - Main spindle taper: ISO 40, collapses under load, 155 tools HSK - Max. spindle speed: 18,000 rpm - Min. spindle speed: 35 rpm - Rated power (100% duty cycle): 33.0 kW - Rapid traverse speed X-Y & Z axis: 50 m/min - Table width: 3500 mm - Table length: 820 mm - T-slot width: 18 mm - Number of T-slots: 7 - T-slot spacing: 100 mm - Table height from floor: 870 mm - Tool changer, standard tool stations: 30 - Optional tool stations: 48 - Tool selection method: shortest path - Tool shank: ISO 40 - With occupied neighboring stations: 80 mm - With free neighboring stations: 130 mm - Max. tool weight: 8 kgf - Total weight of all magazine tools: 150 kgf - Max. tool length: 350 mm - Tool change time (chip-to-chip): 4.7 s - Connection: 400 V / 50/60 Hz - Air pressure: 5 – 9 bar - Air consumption: 260 l/min - Tank capacity: 500 l - Dimensions (H x L x W): 3376 x 5480 x 4051 mm - Approx. weight: 16,300 kg - Color: grey / black

Tahun pembuatan: 2015, jam operasional: 13.792 h, Kondisi: siap digunakan (bekas), Allgemeine Daten Maschinengewicht: 8.000 kg Steuerung Hersteller: MAZATROL Modell: Preview 3 Hauptantrieb Laserleistung: 4,0 kW Werkstück Werkstückgewicht: 900 kg Arbeitstisch Außenlänge: 3.000 mm Außenbreite: 1.500 mm Tischbelastung: 900 kg Diese Faserlaser-Schneidanlage wurde 2015 hergestellt und ist mit einem 4,0-kW-IPG-Faserlaser sowie einer MAZATROL PREVIEW 3 CNC-Steuerung ausgestattet. Die Maschine ist auf präzises Schneiden von Baustahl bis zu 9,0 mm und Edelstahl bis zu 16,0 mm ausgelegt. Es können Werkstücke mit einem maximalen Gewicht von ca. 900 kg auf einem Tisch mit den Maßen 3.000 mm x 1.500 mm bearbeitet werden. Wenn Sie auf der Suche nach hochwertigen Schneidleistungen sind, empfehlen wir die Mazak OPTIPLEX 3015 FIBER II, die wir zum Verkauf anbieten. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Iodpex D I Twsfx Aa Notb Schneiden

Kondisi: siap digunakan (bekas), Mazak tool changer for Mazak machine H 400, used, normal signs of wear, 100% functional, scope of delivery as per photos Iedpfxsi Eb Drs Aa Notb

Kondisi: siap digunakan (bekas), Mazak tool changer for Mazak machine H 400, used, normal signs of wear, 100% functional, scope of delivery as per photos Itodsi Eb Dnjpfx Aa Nsb