Beli Mchale F 550 bekas (35.435)

Tahun pembuatan: 2026, Kondisi: baru, Mesin Penyaring | Mesin Ayakan Getar Tipe ASM-550 Mesin demonstrasi - Merek: S&F GmbH - Tipe: ASM-550 - Kapasitas penyaringan: sekitar 60 - 70 m³/jam (untuk serpihan kayu dan serbuk gergaji) - Luas ayakan: 5,4 m² - Fraksi: 3 atau 4 unit Dcjdpfx Ajxtfv Ielyok - Tingkat ayakan: 3 susun - Daya penggerak: 4,0 kW - Berat mesin: sekitar 3.800 kg - Warna mesin: RAL 6011 hijau reseda - Sisipan ayakan dan keluaran material dapat dipilih bebas Cocok untuk penyaringan bulk material berikut, antara lain: - Serpihan kayu dan bahan cacah kayu - Serbuk gergaji dan serbuk kayu - Biomassa - Pelet kayu - Arang kayu - Kayu bekas - Kulit kayu Ayakan getar | Ayakan serpihan kayu | Mesin ayak getar | Ayakan datar | Ayakan bergetar | Ayakan rol | Mesin penyaring serpihan kayu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0312101, lebar kerja: 550 mm, berat keseluruhan: 3.000 kg, daya: 32 kW (43,51 hp), RINCIAN TEKNIS Jumlah stasiun: 1 unit Jenis stasiun: Pengamplasan pita Lebar kerja maks.: 550 mm RINCIAN MESIN Daya: 32 kW Penggerak: Konvensional Jenis pemrosesan: Kering Dimensi & Berat Dimensi (P x L x T): 1.700 x 2.700 x 2.900 mm Berat kosong: 3.000 kg Dodjzrmqqopfx Alyjck Paket pengiriman: 2 unit PERALATAN Tanda CE

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 443 h, Format 4, Gergaji Bundar Format Kappa 550 e-motion -10 kW, 3 kecepatan putaran 3000/4000/5000 RPM. -Tahun pembuatan: 2017 -Indikator operasi Vorritzer -Penghenti pemotong 3200 mm, dapat diputar 90°–45°, 2 penyangga penghenti -Meja ekstensi 1250 x 650 mm -Meja geser format „X-Roll“, panjang pemotongan 3200 mm, sepatu pemangkas -Penghenti paralel yang dikontrol posisi dengan tampilan digital di panel kontrol pada ketinggian mata, lebar pemotongan 1250 mm -Pelindung atas, penutup untuk 90° dan penutup untuk pemotongan sudut, tinggi dapat disesuaikan dan dapat diputar menjauh dari area kerja -Kontrol e-motion, layar warna 15", fungsi sentuh, panel kontrol pada ketinggian mata. Antarmuka USB dan persiapan untuk koneksi jaringan, dapat disesuaikan & dapat diputar menjauh dari area kerja -Diameter mata gergaji 250–550 mm, tinggi pemotongan maks. 202 mm -Penyesuaian tinggi & sudut yang dikontrol posisi 0°–46° -Gergaji bundar dengan perpanjangan meja hingga 1200 mm di belakang sumbu gergaji, baja dilapisi bubuk -Berat: 1300 kg -Indikator operasi Vorritzer Dcsdpsw Tfahefx Alyek -Total jam kerja: 443,47 jam Harga dari lokasi Transportasi mungkin dengan biaya tambahan!

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 18.635 h, kapasitas angkut: 2.500 kg, tinggi angkat: 5.500 mm, jenis bahan bakar: gas, tipe tiang: triplex, tinggi konstruksi: 2.400 mm, Linde H25T Triplo 550 Freelift / Sideshift / Pengatur Posisi Garpu LPG 2007 Video dapat dikirim melalui Whatsapp. Stok tersedia secara berkelanjutan, lihat situs web. Dsdpfx Alozr Eirsyeck Harga adalah harga di Nuland. Van de Wert Trading B.V. memiliki stok yang beragam, termasuk mesin, truk, trailer, dan aksesori. Semua pengiriman kami adalah dengan harga jual dan dalam kondisi "APA ADANYA" tanpa jaminan. (lihat syarat dan ketentuan umum kami) Untuk pemeriksaan dan/atau uji coba, Anda dapat membuat janji temu tanpa kewajiban apa pun. Mohon hubungi kami terlebih dahulu, karena kami tidak selalu ada di lokasi. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: hibrida, Tahun pembuatan: 2026, FABO FTJ-12-85 adalah mesin penghancur rahang bergerak yang dirancang untuk aplikasi penghancuran primer di lokasi pertambangan, penggalian, dan daur ulang. Dilengkapi dengan penghancur rahang berukuran 1200 × 870 mm yang kuat, mesin ini menghasilkan kapasitas produksi yang tinggi, rasio penghancuran yang sangat baik, dan kinerja yang andal, bahkan dalam kondisi yang paling menantang. Dengan sistem otomasi PLC, pengumpan berkecepatan variabel, dan unit tenaga diesel-listrik, FTJ-12-85 menawarkan pengoperasian yang efisien, konsumsi bahan bakar yang rendah, dan perawatan yang mudah. Rangka bergerak yang kokoh memastikan mobilitas maksimum, menjadikannya solusi ideal untuk proyek penghancuran dengan kapasitas tinggi. Kapasitas Produksi: 350-550 T/Jam Ukuran Umpan Maksimum: 800 mm Bukaan Penghancur: 1200 × 870 mm Sistem Penggerak: Diesel-Listrik Dodpfxozibcve Alysck FABO – Kualitas adalah Jiwa Kami.

Kondisi: bekas, jarak tempuh: 280.425 km, daya: 177 kW (240,65 hp), pendaftaran pertama: 06/2015, jenis bahan bakar: diesel, berat kosong: 7.600 kg, berat muatan maksimum: 4.400 kg, berat keseluruhan: 12.000 kg, konfigurasi gandar: 4x2, rem: pengereman mesin, warna: putih, kabin pengemudi: lain, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat duduk: 2, volume ruang muat: 35 m³, panjang ruang muatan: 6.421 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.250 mm, Perlengkapan: ABS, kendali jelajah, komputer bawaan, kontrol traksi, kunci diferensial, pendingin udara, tail lift, unit pendingin,

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good used condition and fully operational. It is equipped with a SEW brand gear motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, long service times are no problem. Conical rollers and a specially developed belt guiding system ensure the highest possible running smoothness. The pictures shown of the conveyor system were taken while still installed in a logistics center. Dcsdpfxek Aa Uns Alyok Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet available as an option Conveying speed (v m/s): 0.03–1.05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11/0.55/S1 Belt: double-layer, green, smooth, KT36 Year of manufacture: 2001 Optionally available: - Support stands - Side guides Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional consultation, simply get in touch with us. Contact us by phone or email. We will be happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor GKF 1650-750-550 IR600 70° Right RA1441 The Transnorm belt curve is in good (used) condition and fully functional. It features a SEW brand geared motor. Support legs are not included in the scope of delivery, but are available as an option upon request. Belt curves are frequently used in intralogistics for the in-house transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to low-tension drive technology across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model Designation: Belt Curve Conveyor TS 1600-105 Conveying Length, Center Radius (NL): 1650 mm Dedpfx Ask Abazjlyjck Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 600 mm Conveying Angle: 70° Support Legs: optional Conveying Speed (v m/s): adjustable up and down with frequency inverter Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double ply, green, smooth, KT36 (wear see pictures) Year of Manufacture: 2001 Special Features / Accessories: Side guides included on both sides Optionally available: Support legs Net price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Reach out to us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Lippert Belt Conveyor Inclined Belt GF 4360-550-400 RA1606 Dcodpfjk Abd Nox Alyek The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW-brand motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or photoelectric sensors can be installed upon request for an additional fee. Support legs are not included in the scope of delivery but are available as an option upon request. The photos shown of the conveyor system were taken while it was still installed in a logistics center. Technical specifications: Conveyor length (NL): 4,360 mm (infeed belt + inclined belt with curve and upper straight section) Frame width (NB): 550 mm Belt width (GuB): 400 mm Overall height (BH): 105 mm Support legs: optionally available Conveyor speed (v m/s): adjustable upwards and downwards via frequency inverter Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 Incline/decline: adjustable Optional accessories: Support legs Side guides, single-sided and double-sided All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Lippert Belt Conveyor Inclined Belt GF 1995-550-400 RA1656 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW-branded motor featuring a MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are available as an optional extra upon request. The pictures shown of the conveyor system were taken while still installed in a logistics center. Technical data: Conveyor length (NL): 1995 mm (pre-feed belt 560 mm + inclined belt 1435 mm) Frame width (NB): 550 mm Belt width (GuB): 400 mm Frame height (BH): 105 mm Support legs: available as an option Conveying speed (v m/s): adjustable up and down with frequency inverter Drive: SEW geared motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 Incline/decline: adjustable Optionally available: Support legs Single-sided and double-sided side guides Prices quoted are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Dedpfek Abd Tex Alyeck

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 85°-775-550 IR600 RA1658 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery, but are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out due to their performance and reliability. Thanks to a low-tension drive across the full belt width, long operating times are effortless. Tapered rollers and a specially developed belt guidance system ensure the highest possible running smoothness. Technical data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 1703 mm Frame width (NB): 775 mm Djdek Abfbspfx Alyock Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 85° degrees Incline: 175 mm / 85° degrees = 741.2 mm / revolution (360°) Support legs: optionally available Conveying speed (v m/s): adjustable up/down with frequency converter Drive: SEW geared motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Optionally available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guide system ensure maximum smooth running. The displayed images of the conveyor system were taken while still installed in a logistics center. Technical specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: side guides on both sides included Dcsdek Abuispfx Alyjk Optional available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Lippert lead-in/out belt, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 mm, or 820 mm with belt width 600 mm Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): speed is matched to the main belt via gear ratio Dcodpfxomqty Uo Alyok Drive: toothed belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options available: Support stands Side guides, single- or double-sided Please note that a suitable sprocket must be fitted on the output shaft for the belt drive. As a result, it may be necessary to use a different return roller. Please contact us for further details. Damaged belts are replaced prior to delivery. All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, please contact us directly. Simply call us or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guide system ensure maximum smooth running. The displayed images of the conveyor system were taken while still installed in a logistics center. Technical specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Dodpjk Aa Ukofx Alyeck Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: side guides on both sides included Optional available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor, left-handed, GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve conveyor is in good used condition and fully operational. It is equipped with a SEW-branded geared motor. Support legs are not included in the scope of delivery but are available as an optional extra upon request. Belt curves are widely used in intralogistics for in-house transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are no problem. Tapered drums and a specially-designed belt guide system ensure the highest possible running smoothness. The images shown depict the conveyor system still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying Length (center radius, NL): 640 mm Frame Width (NB): 750 mm Dcodek Abcgjpfx Alyek Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 1300 mm Conveying Angle: 20° degrees Support feet and side guides optionally available on both sides Conveying Speed (v m/s): 0.03-1.05 m/s Drive: SEW Geared Motor SA37/1 DT71D4/MM3/BW1 Electrical Data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double-layer, green, smooth, KT36 (signs of wear visible in photos) Year of Manufacture: 2001 Options available: Support legs Side guide (single-sided or double-sided) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, simply get in touch with us. Contact us by phone or email—we are happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW-branded gear motor. Supports are not included in the scope of delivery, but are available on request as an option. Belt curves are commonly used in intralogistics for the internal transport of unit loads and have become an indispensable part of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating hours are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Dedpfxsk Abcre Alyeck Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius/NL): 4820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° Support feet: optionally available Conveying speed (v m/s): adjustable upwards and downwards with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Optional: Supports All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice please feel free to contact us. Simply call or email us. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you soon. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Lippert lead-in/out belt, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Dcjdpfx Aemqty Rjlyok Conveyor length (NL): 640 mm or 815 mm with belt width 400 mm, or 820 mm with belt width 600 mm Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): speed is matched to the main belt via gear ratio Drive: toothed belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options available: Support stands Side guides, single- or double-sided Please note that a suitable sprocket must be fitted on the output shaft for the belt drive. As a result, it may be necessary to use a different return roller. Please contact us for further details. Damaged belts are replaced prior to delivery. All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, please contact us directly. Simply call us or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2000, Transnorm Belt Curve Conveyor right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to the low-stress drive system across the entire belt width, extended operating times are no problem. Tapered drums and a specially designed belt guiding system ensure maximum running smoothness. Dcsdpfx Aok Ablpolyjk Technical data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees Support legs: optionally available Conveying speed (v m/s): freely adjustable via frequency inverter between 0.032–1.17 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, 0.55 kW / S1 Year of manufacture: 2000 Scope of delivery: Without supports Optionally available: Supports Side guides single- or double-sided Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please contact us directly. Feel free to reach out via phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor, Left-Hand GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve conveyor is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Support legs are not included. These are optionally available upon request. Belt curves are frequently used in intralogistics for transporting unit loads within facilities and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long-duration operation is not an issue. Tapered rollers and a specially engineered belt guidance system ensure maximum smoothness and quiet running. The images show the conveyor system as installed in a logistics center. Technical Specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length (centerline radius, NL): 680 mm Dcedpfsk Aba Tex Alyek Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Curve angle: 45° Support legs: optionally available Conveying speed (v m/s): 0.03 – 1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical specs: 50Hz, V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 (see photos for wear) Year of manufacture: 2001 Optionally included: Support legs Side guide (single-sided and double-sided) All prices net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional consultation, please feel free to contact us by phone or email. We are happy to support you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good used condition and fully operational. It comes equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are designed for extended operation times. Tapered rollers and a specially developed belt guide system ensure maximum running smoothness. The images shown display the conveyor system while still installed in a logistics center. Technical data: Designation: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 3900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Dcsdpek Aa T Refx Alyok Optionally available: - Support stands - Side guides (one-sided or double-sided) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply contact us. Just reach out to us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 Dcedsk Aa T Hopfx Alyok RA1390 The Transnorm belt curve is in good (used) condition and is fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery, but can be optionally supplied upon request. Belt curve conveyors are frequently used in intralogistics for the in-house transportation of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guidance system ensure the highest possible running smoothness. The pictures shown depict the conveyor system in its installed state in a logistics center. Technical Data: Type: Belt Curve Conveyor TS 1600-105 Conveying Length (middle radius, NL): 766 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 700 mm Conveying Angle: 45° Support Legs: optionally available Conveying Speed (V m/s): 0.03–1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz v380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth Year of Manufacture: 2001 Optional Accessories: Support legs Side guide (one-sided or both sides) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 550 mm, daya: 32 kW (43,51 hp), berat kosong: 3.000 kg, Perlengkapan: Penandaan CE, Tidak ada harga minimum – penjualan dijamin dengan harga tertinggi! Djdpfxozk Dyys Alysck RINCIAN TEKNIS Lebar kerja maksimum: 550 mm RINCIAN MESIN Daya: 32 kW Dimensi & Berat Dimensi (P x L x T): 1.700 x 2.700 x 2.900 mm Berat kosong: 3.000 kg Penggerak: Konvensional Basah/Kering: Kering PERALATAN Jenis stasiun 1: Sabuk pengamplasan Tanda CE

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jam operasional: 3.324 h, kapasitas angkut: 5.000 kg, tinggi angkat: 4.425 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.260 mm, panjang garpu: 1.200 mm, jenis penggerak: Diesel, Forklift Diesel Kelas ISO: Kelas ISO 3 = 2.500 - 4.999 kg Tipe tiang: Triplex Transmisi: Hidrostatik Kondisi: Direkondisi ulang tanpa garansi Dodpfxey Rbcns Alyeck Kondisi teknis: sangat baik Jenis ban depan: Superelastik Kondisi ban depan: Baru Jenis ban belakang: Superelastik Kondisi ban belakang: Baru Deskripsi: Harga termasuk pemeriksaan UVV baru dan layanan, pengecatan sangat baik, 4x ban SE seperti baru, side shifter, katup ke-3, lampu kerja belakang, lampu kerja depan, penutup atap, full free lift, sertifikat CE,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 2.164 h, kapasitas angkut: 4.990 kg, tinggi angkat: 5.500 mm, pengangkatan bebas: 1.796 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.565 mm, lebar kerangka garpu: 1.260 mm, panjang garpu: 1.600 mm, berat kosong: 8.109 kg, panjang total: 2.812 mm, jenis penggerak: Elektro, lebar konstruksi: 1.450 mm, Electro 4-wheel forklift Load centre: 500 mm Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tyres type: Non-marking Front tyres size: 355/50-15 Front tyres condition: 80 - 100% Rear tyres type: Non-marking Rear tyres size: 21x8-9 Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Jungheinrich Dedpfxszhycls Alyock Battery type: PzS Battery year: 2016 Battery condition: 60 - 80% Description: Inspection and FEM (UVV) test newly performed Side shifter, 3rd valve, 4th valve, rear working lights, front working lights, load backrest, full free lift, safety light, safety pilot, non-marking tyres, interior mirror, joystick, single-pedal operation, solo-pilot joystick, comfort seat, hydraulic steering, panoramic rear-view mirror, multi-colour display, beacon, FloorSport rear and front reverse warning system.

Kondisi: baik (bekas), High-pressure radial fan, dust extraction blower, exhaust fume extraction, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower Dcjdpjf T Snvefx Alyjk - Fan and housing: made of stainless steel - Motor power: 2.2 kW - Speed: 1440 rpm - Fan diameter: 550 mm - Quantity: 3 units available - Price: per unit - Dimensions: 570/625/H625 mm - Weight: 74 kg/unit