Beli Memobike 6050 bekas (142)

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.700 mm, panjang garpu: 1.600 mm, panjang total: 4.470 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s Lajdpfxexd Hfle Ah Nog - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baru, Press force: 320 Bending length: 6050 mm Distance between uprights: 5100 mm Installation height: 650 mm Maximum stroke: 350 mm Throat depth: 450 mm Approx. weight: 23,100 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control) CNC crowning via control: Yes, via Esa S630 (2D graphic control) Motor power: 30 kW Technical Specifications XL 60320 Unit Bending Length: 6050 mm Bending Capacity: 320 tons Descent Speed: 80 mm/sec Bending Speed: 10 mm/sec Return Speed: 80 mm/sec Stroke: 350 mm Opening Height (D): 650 mm Throat Depth (E): 450 mm Distance Between Uprights (B): 5100 mm Length (L): 6865 mm Width (W): 2280 mm Width without Front Gauge (Y): 1760 mm Lodod Ehh Tjpfx Ah Njag Maximum Height: 3110 mm Main Motor: 30 kW Oil Tank: 400 liters Weight: 23,100 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatility. The Europa XL offers a large installation height, resulting in a long stroke (cylinder travel). The large throat depth allows for minimal constraint even with sizeable workpieces. We prioritise quality, which is reflected in the control system as well. As standard control, the high-grade S640 (2D graphic control) is included. Additionally, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes controlled via the system. CNC crowning with Esa S640 (2D graphic control) is naturally also included. We make no compromises regarding the upper tool and die, supplying the KKI EUROPA XL CNC press brake with high-quality tooling from EUROSTAMP Italy. Of course, a machine is only as good as its service. This is why we focus on highly qualified staff with many years of experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic control) Back gauge with twin linear guides and ball screw Motorized crowning device with CNC control Heavy-duty adjustable height with handwheel, from 175 tons heavy-duty version with linear guide Laser protection device on the upper beam CE safety equipment Various options available Additional controls: ESA 640 2D 15'' touchscreen control                                                           ¤ 4,520,-- incl. ESA 675 W 3D 21'' touchscreen control (Windows-based)               ¤ 6,485,-- DELEM 66 T 2D 17'' touchscreen control (Windows-based)              ¤ 10,165,-- DELEM 69 T 3D 17'' touchscreen control (Windows-based)              ¤ 16,350,-- KK-Industries GmbH There’s something for everyone!

Kondisi: baru, Fanuc A06B-6050-H102 Velocity Control Unit, unused, 100% functional Lodpfxsi D Uwco Ah Neag

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516329V00442, Tahun pembuatan: 2019, jam operasional: 9.813 h, kapasitas angkut: 5.000 kg, tinggi angkat: 4.470 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, panjang garpu: 1.400 mm, RINCIAN TEKNIS Kapasitas angkat: 5.000 kg Tinggi angkat: 4.470 mm Tinggi lorong: 3.000 mm Dimensi garpu: 1.400 x 1.870 mm Lebar minimum garpu: 560 mm DETAIL MESIN Lasdoyx S Rropfx Ah Njg Tiang: Duplex Tipe bahan bakar: Listrik Dimensi & Berat Dimensi (P x L x T): 2.890 x 1.390 x 3.010 mm Berat: 7.000 kg Jumlah roda: 4 Kapasitas: 930 Ah Tegangan baterai: 80 V Hasil uji baterai: 66% Jam kerja: 9.813 jam PERLENGKAPAN Sideshift Penyetelan garpu Kabina setengah tertutup Lampu kerja Pelat nomor Pengisi daya

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516329J00544, Tahun pembuatan: 2018, jam operasional: 3.315 h, kapasitas angkut: 5.000 kg, tinggi angkat: 3.180 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, panjang garpu: 1.210 mm, berat kosong: 7.114 kg, RINCIAN TEKNIS Kapasitas angkat: 5.000 kg Tinggi angkat: 3.180 mm Tinggi bebas untuk lewat: 2.400 mm Lajdpfxozt I Nqs Ah Njg Angkat bebas: 0 mm Garpu Panjang garpu: 1.210 mm Lebar garpu maks.: 1.140 mm Lebar garpu min.: 310 mm RINCIAN MESIN Jenis tiang: Duplex Jam operasional: 3.315 jam Penggerak: Elektrik Baterai Merek/Tipe: 6 PZM 930 Tahun pembuatan baterai: 2018 Kapasitas: 930 Ah Tegangan baterai: 80 V Dimensi & Berat Dimensi transportasi (P × L × T): 2.896 × 1.399 × 2.350 mm Berat kosong: 7.114 kg PERLENGKAPAN Katup ke-3 dan ke-4 untuk penyangga garpu Kabina sebagian Lampu kerja Dokumentasi Tanda CE

Kondisi: siap digunakan (bekas), Motor Siemens 1FK7103-2AF71-1QH0 SN: YFCN38886605001 – Encoder AS20DQI P04 / Rem 24 VDC 24,0W 3610051, bekas, kondisi terawat baik, berfungsi 100%, lingkup pengiriman sesuai foto Lasdpfx Aox Dul Heh Nsg

Kondisi: baru, Tahun pembuatan: 2026, jenis bahan bakar: diesel, produsen motor: Perkins 1206J-E70TTAG, bau-generator-200kva Lodpfx Ajx S Umvoh Noag

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 6.892 h, kapasitas angkut: 5.000 kg, tinggi angkat: 3.500 mm, tinggi konstruksi: 2.570 mm, berat kosong: 8.244 kg, Perlengkapan: geser samping, 20240614-1 Lajdpjza Dnwjfx Ah Neg

Tahun pembuatan: 1998, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS Material length: 6050 mm Sheet thickness: 6 mm (450 N/mm²) Passage: 6050 mm Frame throat depth: 100 mm Control: ELGO P8721 Number of support arms: 4 Backgauge range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS Machine length: 7000 mm Machine width (without support arms): 2350 mm Machine width with support arms: 3440 mm Machine height: 2550 mm Ledpfxol N Ufyj Ah Nsag Machine weight: 21,000 kg Oil tank: 300 l Connected load: 18 kW Material: Alu 1.2 mm EQUIPMENT Motorized backgauge 1 side gauge Sheet support system

Kondisi: baru, Fanuc A06B-6050-H104 Velocity Control Unit, unused, 100% functional Ljdpji D Uwgefx Ah Neag

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516330J00044, Tahun pembuatan: 2018, jam operasional: 1.265 h, kapasitas angkut: 4.990 kg, tinggi angkat: 4.000 mm, tipe tiang: dupleks, panjang garpu: 1.200 mm, lebar garpu: 1.150 mm, DETAIL TEKNIS Kapasitas angkat: 4.990 kg Tinggi angkat: 4.000 mm Tinggi jalan masuk: 2.800 mm Panjang garpu: 1.200 mm Lebar maksimum garpu: 1.150 mm DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 3.000 mm x 1.400 mm x 2.800 mm Berat kosong: 7.726 kg Tiang: Duplex Jumlah roda: 4 Penggerak: Elektrik Baterai Merek/Tipe: 80V 6PZM 930 Tahun produksi baterai: 2021 Kapasitas: 930 Ah Tegangan baterai: 80 V Hasil uji baterai: 60% Jam operasional: 1.265 jam Lsdpfx Ahex Hzzie Nsag PERLENGKAPAN Pergeseran samping Ban tidak meninggalkan bekas Lampu kerja Sertifikasi CE Buku panduan pengguna

Tahun pembuatan: 2024, Kondisi: baru, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical Data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 365 mm Installation height: 630 mm Lodpfx Ahefin Hws Njag Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y rapid traverse: 120 mm/sec Y working speed: 8 mm/sec Y return speed: 100 mm/sec X axis working speed: 250 mm/sec R axis working speed: 140 mm/sec R axis travel: 250 mm Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in research and the manufacture of sheet metal processing machines, with 8,000 machines manufactured annually in three technologically advanced production facilities over a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in the industry, with products distributed in 120 countries worldwide. With our subsidiary in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here we are your direct contact from within the ranks of Durmazlar, providing you with expert advice and support when it comes to sheet metal processing machinery. Our demonstration center gives you the opportunity to experience our machines firsthand, to be convinced by the quality and precision technology of our products, and to receive the best possible consultation tailored to your business objectives. Our task is to be your direct local contact and to offer you service solutions including training and after-sales support on site. We are pleased to accompany you from Germany – from the initial consultation, through purchase, and throughout the entire service life of your machine. Thanks to our German branch, we are always local when you need us, so we can respond quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Kondisi: baru, Working area: 2000 x 6000 Loading capacity: 1450 X-axis travel: 2020 Y-axis travel: 6050 Laser power: 12 Positioning accuracy: 0.05 Repeatability: 0.03 Approx. weight: 11,500 Dimensions (LxWxH): 10,000 x 4,400 x 2,120 The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It represents a high-efficiency, upper-class standard laser cutting solution, capable of supporting laser powers up to 30,000 W, making it an excellent choice for cutting thick sheets. Typically, FLC fiber laser cutting machines are used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large-scale industrial systems. It is an ideal cutting solution for companies looking to outsource their cutting requirements. The wireless remote control makes it easy to start blowing, cutting, pausing, simulate calibration, and more. It comes standard with nesting software, fully automatically preparing cutting jobs quickly without operator input. The machine also features flycutting capability. Equipped with a dual pallet changer, you can continue cutting without downtime. All our machines are manufactured according to European standards and have CE certification. Our FLC models are equipped with automatic nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function for obstacle detection and automatic head positioning. Ledpforuwb Asx Ah Nsag Cutting heads are equipped with automatic cooling. All bridge structures used in our machines are single-piece, welded aluminum alloy plate constructions. The one-piece design ensures bridge rigidity, maintaining its shape and preventing deformation from impacts, overlaps, or loads. Thanks to being three times lighter than steel bridges, high speeds and accelerations can be achieved with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flycutting - Nozzle and lens starter kit - Part debris drawers - Automatic pallet changer - Automatic nozzle cleaning - CE conformity - On-site operator training - Wireless remote diagnostics - Automatic lubrication system - Dual camera

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 5380 x 1860 x 1760 mm Weight: 6050 kg Total Power Requirement: 54.75 kW Four-Side Planer / Moulder TIMBERMAX 7-23-RR-TT - Planing Width: 20 - 230 mm - Planing Height: 8 - 160 mm - Min. Workpiece Length: 720 mm (individual) / 280 mm (serial production) - 7 Spindles - Spindle Diameter: 40 mm - Spindle Speed: 6,800 rpm - Variable Feed Speed: 6 - 36 m/min - Bottom Joiner Shaft, Max. Tool Diameter: 125 mm - Right Vertical Shaft, Max. Tool Diameter: 108 - 200 mm - Second Right Vertical Shaft, Max. Tool Diameter: 108 - 200 mm - Left Vertical Shaft, Max. Tool Diameter: 108 - 200 mm - Upper Horizontal Shaft, Max. Tool Diameter: 108 - 180 mm - Second Upper Horizontal Shaft, Max. Tool Diameter: 108 - 180 mm - Lower Horizontal Shaft, Max. Tool Diameter: 108 - 230 mm Spindle Sequence: 1. Bottom: 5.5 kW 2. Right Vertical: 5.5 kW 3. Second Right Vertical: 7.5 kW 4. Left Vertical: 7.5 kW Ledpfx Ahjv A Hrye Nsag 5. Top: 7.5 kW 6. Second Top: 7.5 kW 7. Lower: 7.5 kW - Feed Motor: 5.5 kW - Motor for Height Adjustment: 0.75 kW - Total Connected Load: 54.75 kW - Compressed Air Connection: max. 6 bar - Extraction Ports: 7 x 150 mm - Dimensions (LxWxH): 5380 x 1860 x 1760 mm - Weight: 6,050 kg INCLUDES: - Hard-chromed tables - CE Standard - Pneumatic side pressure before the left spindle - Lubricant pump - Pneumatic pressure feed rollers - Feed system with cardan drive - Powered table rollers

Kondisi: bekas, panjang total: 500 mm, Harga untuk 1 buah ROBOT EXTENDER Kode: KRC2 360-500 ROBOT EXTENDER Panjang: 25 cm & 50 cm Merek: KUKA Kondisi: BEKAS Extender – 50 cm | Harga: €1.300 Laedjmrqwyjpfx Ah Nog

Kondisi: baru, Condition new Delivery time approx. 4-6 months from order Country of origin Turkey Price €231,900 Lasdpjwir Avofx Ah Njg Pressing force 400 t Bending length 6050 mm Axes Y1 / Y2 / X and R axis Stroke 365 mm Distance between uprights 5100 mm Throat depth (side frame) 510 mm Installation height 630 mm Drive concept hydraulic Rapid traverse Y-axis 150 mm/s Working speed Y-axis 9 mm/s Return speed Y-axis 150 mm/s Backgauge travel X-axis 750 mm Oil tank 160 l Length 7500 mm Width 2110 mm Height 3810 mm Weight 34,600 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour with finger) - User-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphic storage for products and tools - Correction feature - USB connections and Ethernet port for import, backup, and program outsourcing - Operating system Windows - Import support for IGES, STEP, and DXF files Servo-motor driven backgauge on linear guides and ball screw spindles Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, sectionalized and offset 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) Fiessler AKAS laser safety system mounted on upper beam Sheet support arms on linear guides Equipment as per CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Kondisi: baru, condition new delivery time approx. 12–14 weeks from order country of origin Turkey price €292,300 press force 600 t bending length 6050 mm axes Y1 / Y2 / X and R axis stroke 365 mm distance between uprights 5100 mm gap in side frame 510 mm installation height 700 mm drive concept hydraulic rapid traverse Y-axis 80 mm/s working speed Y-axis 6.5 mm/s return speed Y-axis 80 mm/s backgauge travel X-axis 750 mm oil tank capacity 280 l motor 2 x 11 kW length 7600 mm width 2650 mm height 3950 mm weight 52,500 kg EACH CYLINDER WITH ITS OWN SERVO MOTOR AND PUMP 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touchscreen operation (easy contour drawing with finger) - User-friendly dialogue programming selectable in 2D or 3D mode - 2D and 3D bending process simulation - automatic tool selection in 3D mode - automatic calculation of flat length for sheet cutting - automatic determination of bending sequence - graphical product and tool memory - correction capability - USB and Ethernet ports for import, backup and program outsourcing - Windows operating system - support for import of IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC controlled crowning Upper tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V = 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Laedpowiqmasfx Ah Nog Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - hydraulics operate only during upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY Options: CNC Control Delem DA-66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516329G00201, Tahun pembuatan: 2016, jam operasional: 16.244 h, kapasitas angkut: 5.000 kg, tinggi angkat: 4.150 mm, tipe tiang: dupleks, panjang garpu: 1.150 mm, lebar garpu: 2.250 mm, RINCIAN TEKNIS Kapasitas angkat: 5.000 kg Tinggi angkat: 4.150 mm Tipe tiang: Duplex Panjang garpu: 1.150 mm Lebar maksimum garpu: 2.250 mm Lebar minimum garpu: 560 mm Tinggi lintasan: 2.800 mm RINCIAN MESIN Dimensi & Berat Ledpfx Ahexgdh No Neag Dimensi (P x L x T): 3.000 mm x 1.400 mm x 2.800 mm Berat: 7.544 kg Jenis bahan bakar: Listrik Tegangan baterai: 80 V Kapasitas: 840 Ah Jumlah roda: 6 Jam operasi: 16.244 jam PERLENGKAPAN Penyebar garpu 4 arah Tanda CE

Kondisi: baru, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €197,600 Leasing rate: €3,734.64 Pressing force: 400 t Bending length: 6,050 mm Number of axes: 3 Stroke: 365 mm Distance between side frames: 5,100 mm Throat depth at side frame: 510 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse (Y-axis): 120 mm/s Working speed (Y-axis): 8 mm/s Return speed (Y-axis): 100 mm/s Back gauge travel (X-axis): 750 mm Back gauge speed (X-axis): 350 mm/s Back gauge speed (R-axis): 300 mm/s Back gauge travel (R-axis): 250 mm Table height: 1,220 mm Table width: 154 mm Lsdjyui R Tjpfx Ah Neag Oil tank: 500 l Motor power: 37 kW Length: 7,500 mm Width: 2,110 mm Height: 3,810 mm Weight: 34,660 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 2D graphic display 15“ - Intuitive touch-screen operation (easy to draw bending contours with finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphic product and tool memory - Correction function - USB ports for backup and program transfer - PC software for programming on PC, transfer via USB Servo-driven back gauge on linear guides and recirculating ball screws Back gauge finger blocks on dual linear guides CNC-controlled crowning system Upper tool 1010/A/75°, divided and offset 4-V die block 60x60 2009 (V= 16,22,35 and 50 mm) Fiessler AKAS laser safety system mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Greater stroke, installation height, and throat depth - Higher approach and return speeds of the upper beam - Higher back gauge speed - Back gauge fingers on dual rather than single linear guides - More options available, e.g.: additional back gauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, other CNC controls, etc. Price FCA Turkey Options (prices on request): R-axis R/Z1/Z2-axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control Delem DA66 S DA-69S 3D incl. PC software Profile-S with 3D file import capability Hydraulic tool clamping systems

Kondisi: baru, Working area: 2000 x 6000 Loading capacity: 1450 X-axis travel: 2020 Y-axis travel: 6050 Laser power: 4 Positioning accuracy: 0.05 Repeatability: 0.03 Weight approx.: 11,500 Dimensions (LxWxH): 10,000 x 4,400 x 2,120 The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. This is a high-efficiency, premium-standard laser cutting machine capable of carrying laser powers up to 30,000 W, making it an excellent choice for cutting thick materials. FLC fiber laser cutting machines are typically used for processing in the manufacture of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and systems. It is an ideal cutting machine for those looking to outsource processing work. Allows for easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. The standard nesting software program prepares parts for cutting very quickly and with minimal operator input. The machine also features a fly-cutting function. Featuring a double exchange table, cutting operations can continue without interruption. All our machines are produced in accordance with European standards and have CE certification. Our FLC series machines are equipped with nozzle cleaning and a dual camera system. Cutting area options are available in 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and an active anti-collision function, as well as an auto-view feature that detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridge components used in all our machines are made from one-piece welded aluminum alloy sheet constructions. The integrated design ensures the rigidity of the bridge and prevents deformation from impacts, overlaps, or loads. Additionally, thanks to its structure, which is three times lighter than steel profile bridges, high speeds and accelerations are achieved with lower motor power. Included accessories: Ledpfjruwccex Ah Neag - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Fly cutting - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote enquiry - Automatic lubrication system - Dual camera system

Kondisi: baru, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €202,100 Leasing rate: €3,869.08 Pressing force: 320 tons Bending length: 6,050 mm Ledowirgnspfx Ah Njag Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 5,100 mm Side frame throat: 450 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 1,100 mm Table width: 154 mm Oil tank: 160 l Length: 7,500 mm Width: 1,910 mm Height: 3,350 mm Weight: 29,000 kg Individual servo motor and pump per cylinder 4 axes (Y1, Y2, X, and R) CNC controller SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of programmed workpieces - Intuitive touch-screen operation (easy contour drawing with finger) - User-friendly programming in dialog mode, optionally in 2D or 3D - 2D and 3D bending simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory - Correction options - USB ports and Ethernet connection for import, backup, and program export - Operating system: Windows - Supports import of IGES, STEP, and DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V Die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKASam laser safety device mounted to upper beam Sheet support arms on linear guides Equipment in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulic system only runs during upper beam movement - Low energy consumption - Low noise emission - High speed PRICE FCA TURKEY Options: CNC Control Delem DA-66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Kondisi: bekas, RA1180 Roller Curve 45°, Roller Curve Conveyor Ledpfx Ask Aa Hrsh Nsag Conveying Angle: 45° Nominal/External Width (NB): 560 mm Belt Width (BW): 500 mm Internal Radius (IR): 1030 mm Rollers: low-friction bearings with tapered plastic molding Installed Power: 0.18 kW Constant Conveyor Speed: v = 0.3 m/sec. Scope of Delivery: without supports (please request if required) Optional: Supports For individual, professional advice, simply get in touch with us. Contact us easily by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: baru, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €137,900 Lease rate: €2,606.31 Pressing force: 220 t Bending length: 6050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 5100 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 1050 mm Table width: 154 mm Oil tank: 250 l Motor: 22 kW Length: 7500 mm Width: 1770 mm Height: 3350 mm Weight: 20,800 kg Lodpfxswiq R So Ah Njag 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (simple drawing of bending contour by finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet pre-cut - Graphic product and tool memory - Correction capability - USB ports for backup and program export - PC software for offline program creation and transfer to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil fill Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Increased stroke, installation height, and throat depth - Higher approach and return speeds of the upper beam - Higher backgauge speed - Backgauge fingers on double instead of single linear guides - More options available, e.g.: additional backgauge axes (Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, other CNC controls … PRICE FCA TURKEY Options: R-axis R/Z1/Z2 axis DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-clamping lever for upper tool

Kondisi: baik (bekas), Sakelar batas level, alat pengukur level, sensor, sakelar, pemancar pengukuran level, detektor batas level, sakelar batas, sakelar level, sensor level, perangkat evaluasi level, indikator level Laodpfezmuqnjx Ah Nog -Produsen: Endress + Hauser, perangkat evaluasi level (dalam kemasan aslinya) -Tipe: Silometer FMC 320 -Nomor: 922496-0500 -Tegangan: 220 V -Dimensi karton: 125/90/T80 mm -Berat: 0,5 kg

Kondisi: baru, Sistem pengganti alat robot baru dari STÄUBLI. Kemasan asli hanya dibuka untuk keperluan pengambilan foto. Pabrikan: STÄUBLI Seri produk: MPS Tipe: MPS 360-500-630-631-1530 Jenis perangkat: Sistem pergantian alat robot Aplikasi: Pergantian alat otomatis untuk robot industri Lodpfxozcgxdo Ah Noag Jumlah tersedia: 2 unit