Beli Memutar Lengan Pembungkus bekas (4.497)

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Lybra04, Exhibition unit - as new. LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet dimensions: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearings Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Push buttons for machine power-on as well as start & stop functions per CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F02 - Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards can be set independently F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrap height F62 - Ergonomic height for film change Cjdpfx Aboz Ipx Hsvohc WRAPPING PROGRAMS ADJUSTABLE VIA CONTROL PANEL 3 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F12 - Wrapping to a preset height (disabling the photo sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for application of edge protection Soft start cycle to minimize film tearing on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Film specification: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5 A (with PRS / PS) Optionally also available with manual rope formation. Further systems available ex-stock Ludwigsburg for immediate delivery.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet dimensions: 1,200 x 1,200 mm Rotary arm with high-resistance ball bearings Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at wrapping start and end of cycle Emergency stop switch according to CE regulations Positioning aid for accurate pallet placement included in delivery Safety bumper for collision protection Push button for machine power on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) Chjdpfxjz Iprts Abvec F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photo cell delay for wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 3 storable wrapping programs F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (only upwards or only downwards) F01 - 3 - Push button for manual functions F12 - Wrapping to a stored height (disabling height photoelectric sensor) F22 / F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for corner protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE with manually adjustable brake roller on film carriage Film specification: Max. outer diameter Ø 250 mm – Core Ø76mm – Height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE with electromagnetically braked roller Film specification: Max. outer diameter Ø 250 mm – Core Ø76mm – Height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5 A (with PRS / PS) Also available optionally with manual rope formation. Further units available ex-stock Ludwigsburg for immediate delivery.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, pembungkus palet Matco sepenuhnya otomatis termasuk dispenser lembar atas. 1 x lengan putar otomatis Matco 1 x dispenser lembar atas Matco 5 x konveyor rol dengan total panjang sekitar 10 meter 1 x mesin pengikat Cyclop XP112 termasuk: tirai cahaya keselamatan kipas pengaman posisi pemuatan palet panel kontrol Csdpfx Asy Uwk Ajbvshc Tinggi maksimum palet hingga 2400 mm. Untuk informasi lebih lanjut silakan hubungi kami.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S26LybraOPRS03, LYBRA Easy OPRS / 6 Program Dilengkapi dengan pembentukan tali otomatis untuk memperkuat pembungkusan dalam beberapa langkah pada palet. LYBRA OPRS adalah mesin pembungkus palet semi-otomatis dengan lengan putar yang menggabungkan teknologi-teknologi penting untuk pengamanan muatan dalam satu solusi yang ringkas. Dengan kombinasi kereta OPRS, dan secara opsional sistem ARYA, serta pembentukan tali otomatis, ia memastikan pemandu film yang presisi, pengelolaan siklus pembungkusan otomatis, dan pengamanan muatan yang lebih baik pada titik-titik penting palet. Berkat lengan putarnya, ia sangat cocok untuk muatan yang berat dan tidak stabil, serta mengoptimalkan stabilitas muatan selama penanganan, penyimpanan, dan transportasi. RINCIAN TEKNIS - Panel kontrol dengan tampilan KEY – Diameter Ø 1.700 mm – Dimensi muatan maksimum: 1.200 x 1.200 mm – Tinggi pembungkusan (termasuk palet): 2.450 mm – Pengukuran tinggi muatan melalui sel foto dalam mode otomatis – Ramp percepatan/perlambatan dikendalikan melalui inverter frekuensi – Kecepatan pengangkatan yang dapat disesuaikan (gerakan naik/turun) melalui inverter frekuensi – Pelindung sentuh keselamatan – Tombol darurat dengan bentuk kepala jamur sesuai dengan standar CE – Tombol reset mesin sesuai dengan standar CE – Nada sinyal pada awal siklus dan penghentian fase di akhir siklus PARAMETER YANG DAPAT DIATUR PADA PANEL KONTROL Semua parameter fungsi dapat diatur melalui tampilan -Siklus standar (naik dan turun) -Setengah siklus (hanya naik atau hanya turun) -Siklus penuh dengan lapisan bawah pada ketinggian awal yang sama -Siklus cepat (dengan tumpang tindih terbatas atau tanpa tumpang tindih) -Siklus lapisan -Siklus hemat (untuk menghemat beberapa lapisan bawah) PROGRAM PEMBUNGKUSAN YANG DAPAT DIATUR PADA PANEL KONTROL 6 program pembungkusan yang dibuat oleh operator – Semua parameter fungsi dapat diatur pada tampilan – Kecepatan putar dapat diatur dari 5 hingga 12 RPM – Kecepatan pengangkatan kereta (gerakan naik dan turun) dapat diatur secara independen dari 1,3 hingga 5,4 m/menit – 1 hingga 10 lapisan di bagian bawah – 1 hingga 10 lapisan di bagian atas Codpfx Asz Ir Haebvshc – Lapisan penguat selama proses pembungkusan FUNGSI YANG DAPAT DIAKTIFKAN: - Kunci tombol - Siklus dengan mulai dan berhenti pada ketinggian yang telah diprogram - Tinggi pembungkusan palet dengan pengukur ketinggian (sel foto mati) - Siklus lapisan atas, siklus mulai yang lembut - Siklus pembungkusan dengan penguatan dan jumlah lapisan yang dapat diatur - Ketinggian yang nyaman untuk penggantian rol yang mudah KERETA FILM OPRS – Sistem peregangan otomatis yang dimotorisasi dengan 2 rol yang digerakkan secara elektronik dengan rasio transmisi yang dapat dipertukarkan: 150% - 200% (standar) dan 250%; - Diameter rol film luar: 250 mm; - Diameter inti: 76 mm; - Tinggi rol: 500 mm; - Berat rol: 20 kg; Unit tambahan tersedia segera dari gudang Ludwigsburg. Gambar serupa, dapat mencakup opsi.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S26LybraOPRS02, LYBRA Easy OPRS / 6 Program LYBRA OPRS adalah mesin pembungkus stretch semi-otomatis dengan lengan rotasi yang menggabungkan teknologi-teknologi utama untuk pengamanan muatan dalam satu solusi yang ringkas. Dengan kombinasi sled OPRS, dan secara opsional sistem ARYA dan pembentukan benang, mesin ini memastikan panduan film yang presisi, manajemen siklus pembungkusan otomatis, dan pengamanan muatan yang lebih baik pada titik-titik palet yang kritis. Berkat lengan rotasinya, mesin ini sangat cocok untuk muatan yang berat dan tidak stabil, serta mengoptimalkan stabilitas muatan selama penanganan, penyimpanan, dan transportasi. DETAIL TEKNIS - Panel kontrol dengan layar KEY - Diameter Ø 1.700 mm - Dimensi muatan maksimum: 1.200 x 1.200 mm - Tinggi pembungkusan (termasuk palet): 2.450 mm - Pengukuran tinggi muatan menggunakan sel foto dalam mode otomatis - Kontrol ramp percepatan/perlambatan melalui inverter frekuensi - Kecepatan pengangkatan yang dapat disesuaikan (gerakan naik/turun) melalui inverter frekuensi - Perlindungan sentuh keselamatan - Tombol berhenti darurat berbentuk kepala jamur sesuai dengan standar CE - Tombol reset mesin sesuai dengan standar CE - Nada suara saat siklus dimulai dan fase berhenti di akhir siklus PARAMETER YANG DAPAT DIATUR DI PANEL KONTROL Semua parameter fungsi dapat diatur melalui layar - Siklus standar (naik dan turun) - Setengah siklus (hanya naik atau hanya turun) - Siklus penuh dengan lapisan bawah pada ketinggian awal yang sama - Siklus cepat (dengan tumpang tindih terbatas atau tanpa tumpang tindih) - Siklus lapisan - Siklus hemat (untuk menghemat beberapa lapisan bawah) Chsdpfxez Irx No Abvec PROGRAM PEMBUNGKUSAN YANG DAPAT DIATUR DI PANEL KONTROL 6 program pembungkusan yang dibuat oleh operator - Semua parameter fungsi dapat diatur pada layar - Kecepatan putar dapat diatur dari 5 hingga 12 RPM - Kecepatan pengangkatan kereta (gerakan naik dan turun) dapat diatur secara independen dari 1,3 hingga 5,4 m/menit - 1 hingga 10 lapisan di bagian bawah - 1 hingga 10 lapisan di bagian atas - Lapisan penguatan selama proses pembungkusan FUNGSI YANG DAPAT DIAKTIFKAN: - Kunci tombol - Siklus dengan mulai dan berhenti pada ketinggian yang telah diprogram - Tinggi pembungkusan palet dengan pengukur ketinggian (sel foto mati) - Siklus lapisan atas, siklus start yang lembut - Siklus pembungkusan dengan penguatan dan jumlah lapisan yang dapat diatur - Ketinggian yang nyaman untuk penggantian rol yang mudah SLED FILM OPRS - Sistem peregangan yang dimotorisasi dengan 2 rol yang digerakkan secara elektronik dengan rasio transmisi yang dapat dipertukarkan: 150% - 200% (standar) dan 250%; - Diameter rol film luar: 250 mm; - Diameter inti: 76 mm; - Tinggi rol: 500 mm; - Berat rol: 20 kg; Unit tambahan lainnya tersedia segera dari gudang Ludwigsburg. Gambar serupa, mungkin menyertakan opsi.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S26LybraOPRS01, LYBRA Easy OPRS / 6 Program LYBRA OPRS adalah mesin pembungkus palet semi-otomatis dengan lengan putar yang menggabungkan teknologi terpenting untuk pengamanan muatan dalam satu solusi yang ringkas. Dengan menggabungkan sled OPRS, sistem ARYA, dan perangkat tali, mesin ini memastikan pemandu film yang presisi, manajemen siklus pembungkusan otomatis, dan pengamanan muatan yang lebih baik pada titik-titik palet yang kritis. Berkat lengan putarnya, mesin ini sangat cocok untuk muatan yang berat dan tidak stabil, serta mengoptimalkan stabilitas muatan selama penanganan, penyimpanan, dan transportasi. RINCIAN TEKNIS - Panel kontrol dengan tampilan KEY - Diameter Ø 1.700 mm - Dimensi muatan maksimum: 1.200 x 1.200 mm - Tinggi pembungkusan (termasuk palet): 2.450 mm - Pengukuran tinggi muatan menggunakan sel foto dalam mode otomatis - Kontrol ramp percepatan/perlambatan melalui inverter frekuensi - Kecepatan pengangkatan yang dapat disesuaikan (gerakan naik/turun) melalui inverter frekuensi - Pelindung sentuh pengaman - Tombol darurat dengan bentuk kepala jamur sesuai dengan standar CE - Tombol reset mesin sesuai dengan standar CE - Nada sinyal saat siklus dimulai dan berhenti di akhir siklus PARAMETER YANG DAPAT DIATUR DI PANEL KONTROL Semua parameter fungsi dapat diatur melalui tampilan - Siklus standar (naik dan turun) Csdpfxjz Irr As Abvshc - Setengah siklus (hanya naik atau hanya turun) - Siklus lengkap dengan lapisan bawah pada ketinggian awal yang sama - Siklus cepat (dengan tumpang tindih terbatas atau tanpa tumpang tindih) - Siklus lapisan - Siklus hemat (untuk menghemat beberapa lapisan bawah) PROGRAM PEMBUNGKUSAN YANG DAPAT DIATUR DI PANEL KONTROL 6 program pembungkusan yang dibuat oleh operator - Semua parameter fungsi dapat diatur pada tampilan - Kecepatan putar dapat diatur dari 5 hingga 12 putaran/menit - Kecepatan pengangkatan troli (gerakan naik dan turun) dapat diatur secara independen dari 1,3 hingga 5,4 m/menit - 1 hingga 10 lapisan di bagian bawah - 1 hingga 10 lapisan di bagian atas - Lapisan penguatan selama proses pembungkusan FUNGSI YANG DAPAT DIAKTIFKAN: - Kunci tombol - Siklus dengan mulai dan berhenti pada ketinggian yang telah diprogram sebelumnya - Tinggi pembungkusan palet dengan pengukur ketinggian (sel foto mati) - Siklus lembaran atas, siklus lunak - Siklus pembungkusan dengan penguatan dan jumlah lapisan yang dapat disesuaikan - Ketinggian yang nyaman untuk memudahkan penggantian gulungan SLED FILM OPRS - Sistem peregangan otomatis dengan 2 rol yang digerakkan secara elektronik dengan rasio transmisi yang dapat diganti: 150% - 200% (standar) dan 250%; - Diameter rol film luar: 250 mm; - Diameter inti: 76 mm; - Tinggi rol: 500 mm; - Berat rol: 20 kg; SISTEM PENEMPATAN FILM Arya: Menempatkan film secara otomatis pada produk. Unit lain tersedia segera dari gudang Ludwigsburg. Gambar serupa, mungkin menyertakan opsi.

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Smipack BP800AS Mesin pembungkus susut otomatis tipe monoblok dengan sistem pengumpanan sebaris dan batang penyegel pneumatik Kapasitas Maksimum: Hingga 12 bungkus per menit Ukuran Batang Penyegel: 760 mm Tinggi Produk Maksimum: 380 mm Panjang Bungkus Maksimum: 1200 mm Ukuran Gulungan Film Maksimum: 750 x Ø 350 mm Lebar Film Maksimum: 750 mm Jenis Film yang Disarankan: LDPE 20 – 100 µ Catu Daya: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Daya Terpasang: 17.180 W Tekanan Udara: 6 Bar Kebutuhan Udara: 13 Nl/p (liter normal per bungkus) Cedpsz Arh Asfx Abvohc Berat Bersih Mesin: 625 kg Dimensi Mesin: 2840 x 1410 mm (Tinggi: 2105 – 2265 mm) Fitur Utama Sistem kontrol FLXMOD® dengan layar sentuh berwarna penuh 7 inci dan PLC. Memori Dapat menyimpan hingga 50 siklus kerja yang berbeda. Konveyor Terowongan: Dibuat dengan batang serat kaca tahan panas yang menopang hingga 30 kg dan mencegah karat. Sistem Pengumpanan: Gulungan film atas dan bawah yang digerakkan motor dengan kecepatan yang dapat disesuaikan yang dikontrol oleh inverter.

Tahun pembuatan: 2004, Kondisi: bekas, Robopac HELIX HS40 - Mesin pembungkus palet dengan film peregang, tipe lengan, otomatis untuk penggunaan dalam lini produksi Chjdjznmg Ropfx Abvjc Produsen: Robopac Model: HELIX HS40 Tahun produksi: 2004 Kondisi: siap digunakan (bekas) Dimensi palet: minimal 800 mm, maksimal 1800 mm Dimensi muatan yang akan dibungkus, minimal: 800 x 800 mm Dimensi muatan yang akan dibungkus, maksimal: 1800 x 1800 mm Tinggi pembungkusan: minimal 500 mm, maksimal 2400 mm Mesin ini dilengkapi dengan sistem penekan muatan dan aplikator film pelindung. Mesin telah diperbaiki, siap digunakan – ada kemungkinan untuk melihatnya dalam siklus pengujian tanpa muatan. Jika ada pertanyaan atau kebutuhan informasi tambahan, silakan kirim pesan atau hubungi melalui telepon.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Options available: Ramp OPRS film carriage with 200% pre-stretch Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optional 1650 mm) Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start / start/stop) Frequency-controlled film carriage speed upward/downward Acoustic signal at wrapping start and at end of cycle Emergency stop switch as per CE regulations Turntable always stops in the same home position Anti-fall device for the film carriage Pushbuttons for machine power-on, start & stop function & reset as per CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 – Display lock (program change lock) F02 – Infinitely variable turntable speed 5-12 rpm Film carriage speed upward and downward independently adjustable F03 – Film carriage speed upward: 1.3 to 5.4 m/min F04 – Film carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1 - 10 wraps) F06 – Number of wraps at pallet top (1 - 10 wraps) F09 – Delay for photocell wrapping height Chodpfxsz Ipdvj Abvjc F13 - F16 – Film tension for base & top wrapping / upward & downward passes independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping programs F01 - 1 – Cross-wrapping (upward/downward) F01 - 2 – Simple wrapping (only upward or only downward) F01 - 3 – Pushbutton for manual functions F10 - F11 – Wrapping cycle with preset start and stop heights F12 – Wrapping to a preset height (with height sensor deactivated) F22 / F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for applying edge protection F30 - F31 – Wrapping cycle with reinforcement and adjustable wrap count Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton Further units available ex stock Ludwigsburg.

Kondisi: sangat baik (bekas), Kliklok Certiwrap C150 digunakan untuk selongsong bungkus mengelilingi baki makanan siap saji, wadah, dan pot, baik secara individual maupun dalam berbagai konfigurasi multipack. Chodpfxoy A Rlij Abvsc

Tahun pembuatan: 2026, jam operasional: 2 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_03, Exhibition machine – like new. EVA Rotary table / Raised base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm 150 mm - 200 mm raised base frame, adjustable for loading with electric pallet truck Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Beep signal at start of wrapping and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Drop safety system for the film carriage Pushbuttons for machine power on, and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of lower wraps (1 – 10 wraps) F06 – Number of upper wraps (1 – 10 wraps) F09 – Pallet wrapping height setting Chsdpfx Aez Iqnvebvjc F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01-1 – Cross-wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a preset height (disabling the photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start function to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on the film carriage Film specifications: Max. external diameter Ø 250 mm – Core Ø 76 mm – Height 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total rated output: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) Chedpfjz Ipr Hjx Abvjc F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Total connected load: 1.2 kW / 6A Further units available from stock immediately.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Turntable arm wrapping machines are state-of-the-art pallet and stretch film wrapping systems, where a high-performance rotating arm combined with a reliable pre-stretch system enables precise wrapping of pallets. This advanced technology allows the packaged goods to remain stationary during the wrapping process. As a result, rotary arm wrappers are particularly suitable for pallets with light or unstable loads as well as for cargo that is difficult to maneuver. Cjdpfx Aor Nc Spebvehc - Maximum product height: 2,000 mm - Maximum pallet size: 1,200 x 1,200 mm - Minimum weight: 45 kg

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp, 500 mm long Csdpfxoz Ipnhe Abvjhc Manual roping device mounted on the frame at the pallet for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop switch as per CE regulations Turntable always stops at initial home position Fall protection for film carriage Pushbuttons for machine power-on, as well as start & stop function & reset, Ø 22 mm, according to CE standards ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program changes F02 - Continuously variable turntable speed 5–12 rpm Carriage speed independently adjustable for up/down F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Photocell delay for wrapping height F13–F16 - Film application tension for base/top wrap and up/down direction, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) PROGRAMMABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (up/down) F01 - 2 - Simple wrapping (up only or down only) F01 - 3 - Pushbutton for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio preset to 200% Film application tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm; height = 500 mm; core Ø76 mm Standard power supply: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Further machines available ex-stock Ludwigsburg.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiLow05, Demo machine, as new. SYNTHESI with flat turntable Turntable height 25 mm Short ramp 500 mm long TECHNICAL DETAILS: LOW PROFILE Turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage lift speed upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power, start & stop, and reset in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be adjusted independently F03 - Carriage lift speed upwards from 1.3 to 5.4 m/min F04 - Carriage lift speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Delay of photocell for wrap height F13–F16 - Film application tension base & top wrapping / ascent & descent individually adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height Cjdsz Ipwcopfx Abvohc F12 - Wrapping to a preset height (photocell height sensing disabled) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start function to reduce film tears on sharp pallet edges Wrapping cycle with manual or powered rope-threading (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch set to 200% Film application tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection: 230V – 1Ph+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Additional machines available from stock in Ludwigsburg.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya10, Mesin pamer Mytho S Codpfjz Ipunsx Abvjhc dengan TP / potongan tapal kuda, dapat diakses dari permukaan tanah dengan truk pengangkat dan E-Ameise VERSI MAST Tinggi lilit 2450 mm 99 program Layar sentuh 7" SISTEM PENGGULUNG FILM TIPE “PRS” (POWER ROLLER STRETCH) 200% Peregangan awal. Opsional, peregangan awal lebih banyak atau lebih sedikit juga dimungkinkan MEJA PUTAR / TP Ø1650 mm / Bukaan 06.00 - 12.00 (Dapat diubah kapan saja) Sistem ARYA untuk peniupan dan pemotongan film otomatis, termasuk kendali jarak jauh inframerah.

Kondisi: baik (bekas), Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system features a robust robotic mechanism with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), this robot is ideal for assembly tasks and fast pick & place operations. The turboscara SR6 and SR8 are four-axis SCARA (Selective Compliance Assembly Robot Arm) robots offering the following advantages: • Minimal cycle times with maximum precision • Large working envelope and various stroke options • Defined mechanical interfaces • PC-based control with diverse communication options • Conforms to international standards • Brushless drive technology reduces maintenance • Integrated user interface, optional: Gripper connection via Tool Connector • Standard integration of safety technology (Safety Category 3) • User power supply (24 V) installed in control cabinet • The BAPS programming language is easy to learn and enables creation of transparent, clearly structured programs; now with BAPSplus: graphical programming interface • Expandable with compact and flexible input/output modules: B~IO modules or decentralized CAN-I/O modules • Expandable with the VTS02 valve manifold system featuring CAN interface for time-saving installation Technical Data: Rated payload: 2 kg Maximum payload: 8 kg Rated moment of inertia (axis 4): 500 kgcm² Max. moment of inertia (axis 4): 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque (axis 4): continuous/max. 5/10 Nm Weight: 48.5 kg Maximum Speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Including Control System Control system includes the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / technical data: see pictures As the item is available multiple times and the robots are fitted with different end-of-arm tools, photos are for sample illustration only and may differ from the actual item delivered. Item Condition: Used (Specifications and technical details are subject to change and errors!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Extensive workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving in stock A total of 24,000 m² of production space is being decommissioned and liquidated See our other listings too. After purchase, payment is due within 7 working days. Chjdpfoiuzqtjx Abvoc You can find further items—new and used—in our shop! International shipping costs upon request!

Kondisi: baik (bekas), bosch-turbo-scara-sr-800ec Chedpfjg A N Twsx Abvjc

Kondisi: baik (bekas), en-Bosch Turbo Scara SR6 Swing Arm Robot Cjdpfeivd Rqjx Abvohc The SR6/SR8 robot system features robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), this robot is ideal for assembly operations and fast pick & place movements. The TurboScara SR6 and SR8 are four-axis swing arm robots (SCARA robots) offering the following benefits: • Minimal cycle times with maximum precision • Large working area and multiple stroke options • Defined mechanical interfaces • PC-based control with extensive communication options • Compliance with international standards • Brushless drive technology reduces maintenance requirements • Integrated user-side installation, optional: gripper for connecting a tool connector • Standard integration of safety technology (Safety Class 3) • User power supply (24 V) inside control cabinet • Easy-to-learn BAPS programming language enables the creation of clear and understandable programs; new with BAPSplus: graphical programming interface • Expandable with compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connectivity for time-saving installation Technical data: Rated load: 2 kg Maximum load: 8 kg Rated mass moment of inertia: (axis 4) 500 kgcm² Maximum mass moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (axis 4) continuous/max. 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Mounted on an aluminum profile base frame. Condition: used All robots were stored as backup replacement machines at a major automotive supplier and are therefore in very good condition. In addition to approximately 50 vertical carousels (paternosters), countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool trolleys, tools, forklifts, and shelving are plentifully available. A total of 24,000 m² of production space is being dismantled and sold. Please also note our other offers. After purchase, payment is due within 7 working days. More items—new and used—can be found in our shop! International shipping costs on request!

Kondisi: baik (bekas), bosch-scara-sr-800-schwenkarm-roboter Csdpfxshtyzne Abvshc

Kondisi: baik (bekas), bosch-turbo-scara-sr-800 Chodpfxeg A N Tde Abvsc

Kondisi: baik (bekas), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system features a robust four-axis robot mechanism, with each axis freely programmable. Thanks to its high speed and payload capacity (up to 8 kg), this robot is ideal for assembly tasks and fast pick & place operations. The TurboScara SR6 and SR8 are four-axis SCARA (Selective Compliance Assembly Robot Arm) robots, offering the following advantages: • Minimal cycle times with highest precision • Large working envelope and various stroke lengths • Defined mechanical interfaces • PC-based control with extensive communication options • Compliance with international standards • Brushless drive technology reduces maintenance • Integrated user installation, optional: gripper interface for connection to a tool connector • Integrated safety technology (safety class 3) as standard • User power supply (24 V) housed in the control cabinet • The BAPS programming language is easy to learn and enables creation of clear and comprehensible programs; new with BAPSplus: graphical programming interface • Expandable via compact and flexible I/O modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connectivity for time-saving installation Technical Data: Rated payload: 2 kg Maximum payload: 8 kg Rated moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque (axis 4): continuous/max. 5/10 Nm Weight: 48.5 kg Maximum Speeds SR6: Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Mounted on an aluminium profile base frame. Item condition: used All robots were previously held in storage as backup units by a major automotive supplier, and are therefore in very good condition. H1R6D3 You can find more articles – new and used – in our shop! Chodpfx Ajhtyyisbvoc International shipping costs on request!

Tahun pembuatan: 2007, Kondisi: bekas, Europack Compact RTSW 2007, automatische Haubenschrumpfmaschine, angetriebener Bandeinlauf, variable Bandgeschwindigkeit, einstellbare Tunnel- und Schweißtemperatur, teflonbeschichtetes Schweißmesser, Durchlassöffnung 350mm x 200mm, 3-Phasen-Anschluss Chjdpodbqxzjfx Abvsc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Crane tiang berputar, crane hall, crane stasiun kerja -Pabrikan: Demag, crane tiang berputar dengan kapasitas angkat 125 kg -Plat dasar: 350 x 350 mm -Jangkauan: 2.000 mm -Tinggi total: 1.780 mm -Tinggi kait: 840 mm -Katrol rantai: DEMAG tipe DC-Com 1 125 1/1 H4 V8/2 -Angkat utama: 8,0 m/menit -Angkat halus: 2,0 m/menit Chodpoxmi R Aefx Abvoc -Dimensi transportasi: 540/2100/T500 mm -Berat sendiri: 176 kg

Kondisi: baik (bekas), Turntable pallet wrapper, strapping machine, packaging machine, strapping machine, skin packaging machine, pallet wrapper, stretch wrapper, stretch film machine, pallet turntable - Manufacturer: Spinny, turntable from pallet wrapper, without drive Chjdpfx Abopm Th Tevjc - Turntable: Ø 1800 mm - Dimensions: 2800/1825/H150 mm - Weight: 318 kg