Beli Menekan Bantal bekas (531)

Kondisi: baru, de-hu-it-lt-001 Iasded Ab Ndjpfx Aa Nol

Kondisi: bekas, Tahun pembuatan: 1995, Pressure: 100 t Stroke: 20 - 120 mm Strokes per minute: 40 - 240 /min Upright clearance: 1300 mm Installation height (stroke + ram adjustment at top): 670 mm Side frame opening: 400 mm Table surface: 1200 x 800 mm Table through opening: 900 x 200 mm Table height above floor level: 1150 mm Ram area: 1130 x 650 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1 - 9999.9 mm Drive power: 22.0 kW Iedpfowc U Nlex Aa Nsal Weight: 16.0 t Space requirement (W x D x H): 3.7 x 2.5 x 3.7 m Height above floor: 3.7 m Approved for automatic operation according to CE standard with infinitely variable drive (PIV gearbox), pneumatic clutch/brake combination (Ortlinghaus), electronic press force monitoring (dual-channel), automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized oil circulation lubrication Electronic roller feed, manufacturer: Kaiser, model: KWV 250

Kondisi: baik (bekas), Pressing pliers, pressing machine, pressing jaws, pressing tool, pressing rings -Manufacturer: Roller, set of pressing pliers, pressing jaws, and pressing rings -Sizes: M15, M22, M28, Z1 Iodpfx Ajvmhaaoa Noal -Individual components: see photos -Case dimensions: 410/220/H65 mm -Weight: 4.7 kg

Kondisi: bekas, Tahun pembuatan: 1992,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS drum press is ideally suited for compacting steel drums from 30 to 220 liters, but it can also easily compress plastic and cardboard drums. In many cases, these compacted recyclables can even be remarketed. The drum press particularly stands out for its reliability and user-friendly operation. By compacting these types of waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Iaodpfx Aezdr Tsa Nol Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing cycle time: 40 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever operation 30-liter drip tray with drain tap Press plate with spikes for venting drums during the pressing process Maximum safety standards due to fully enclosed housing Suitable for 30 to 220 liter steel bung drums, plastic drums, and cardboard drums A quality product "Made in Europe" Suitable for compacting: Steel drums Plastic drums Cardboard drums Fiber drums and paperboard drums Additional options: Annual maintenance with safety inspection (UVV) Machine color according to RAL chart PLC control with automatic pressing cycle Press insert for cans, oil and air filters Drum press for metal drums / plastic drums

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, gaya penekanan: 200 t, daya: 0,045 kW (0,06 hp),

Kondisi: baru, Press force: 60 t Motor power: 4 kW Stroke: 250 mm Clear stand width: 1,040 mm Piston diameter: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg Equipment - Steel welded construction Iedpfxod Ab Iqj Aa Njal - Infinitely variable stop position - Pressure gauge - Safety valve against overload - 2 V-blocks - Height-adjustable table - Table up/down device - Control with operating lever - Manual left/right movement of the cylinder - Equipment according to CE regulations - Operating manual in GERMAN and ENGLISH

Kondisi: bekas, Tahun pembuatan: 1990, Pressure 32 t Clearance between uprights 680 / 550 mm Stroke 8 - 50 mm Strokes per minute 85 - 500 spm Installation height (stroke + slide adjustment at top) 300 mm Lateral opening between uprights 250 mm Table surface 620 x 450 mm Through-hole in table 450 x 110 mm Table height above floor 915 mm Ram surface 560 x 350 mm Drive power 7.5 kW Machine weight approx. 5.60 t Space requirements approx. 3.6 x 1.65 x 2.8 m Ram adjustment 50 mm Approved for automatic operation according to German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch, pneumatic ram weight compensation, mechanical gripper feed (ZR 18 D) Can be offered as-is, either in working or non-working condition Iedpovuuf Sofx Aa Nsal

Kondisi: bekas, Screw Press REG-MAC for drying films and fibers, and for compacting foam materials (e.g. Styrofoam, EPS) Iasdpfx Aasxgtd Hs Nel drive motor 55 kW

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Side Frame Passage 820x650 mm Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Iaedpfx Aordi Dlja Nsl Extendable Table Plate Hydraulic Roll Block Rails in Table Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Intermittent Airing, Height Adjustment via Gear Motor Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS Barrel Press PLC Auto is ideally suited for compacting steel drums ranging from 30 to 220 liters, but can also effortlessly press plastic and cardboard drums. In many cases, these compacted recyclables can subsequently even be remarketed. This drum press is particularly distinguished by its reliability and ease of operation. By compacting these waste/recyclable materials, you can achieve up to a 90% reduction in volume, significantly lowering disposal costs while returning the material properly into the recycling cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380–400 V (3 phase) Noise emission: 68 dB - PLC control with automatic press cycle - 30-liter drip tray with drain tap - Press plate fitted with spikes to pierce drums for air release during compaction - Highest safety standards with a fully enclosed housing - Suitable for 30 to 220 L steel bung drums, plastic drums, and cardboard drums - A quality product “Made in Europe” Suitable for compacting: - Steel drums - Plastic drums - Cardboard drums - Fiber drums and paperboard drums Additional options: - Annual maintenance with safety (UVV) inspection - Machine color selectable according to RAL Isdpec Spgusfx Aa Noal - Insert for crushing cans, oil, and air filters

Kondisi: hampir baru (bekas), Automatic press line (continuous, short-cycle), suitable for veneer, paper, or lamination applications, consisting of: V03022) Loading station (gantry) "SAG" double station, complete with central motorized roller conveyor. V03023) Brushing machine (for cleaning panels) "POLIMA" V03024) Glue application machine "OMMA" V03025) Motorized feed rollers "OMMA" V03026) Preparation table for panels and motorized infeed belt to the press "SIMI" V03027) Continuous, short-cycle hydraulic hot press "SIMI" 1400 x 4500 mm, with 10 pressing cylinders (diameter 120 mm) Iaedpfsdun Niex Aa Njl V03028) Stacking station (gantry) "SAG" double station, complete with central motorized roller conveyor.

Kondisi: sangat baik (bekas), Here we offer you a TOX self-pierce riveting system. TOX Self-Pierce Riveting System Type TZ-VSN The self-pierce rivet initially penetrates all joining partners and pushes the punched slug out of the joint area. With this innovative self-pierce riveting technology, TOX PRESSOTECHNIK, the specialist for sheet metal connections, expands its product and service portfolio with a pioneering joining process. Self-pierce riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and for joining hybrid parts and assemblies. Iajdpedz Af Asfx Aa Nol The rivet feed systems, tongs, and tool holders are universally designed so that self-pierce rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as self-pierce rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be flexibly processed with either TOX hand tongs or TOX robotic tongs. Type: TZ-VSN Pressing force: 55 kN Total stroke: 140 mm Rivet type: diameter 5 x 4.6 mm Electrical specifications: • Power: 3.4 kW • Mains supply: 400/15/50-60 V/A/Hz • Speed: 200 mm/s • Network type: 3P+N+PE • Control voltage: 24 V DC • Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and correction!) If you have further questions, we are happy to answer them by phone. Written orders are possible via email or fax.

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 250 t Distance between uprights: 1650 / 1400 mm Fixed stroke: 150 mm Stroke rate: 30 - 75 strokes/min Iajdpfx Ajvuucwoa Nol Shut height (stroke + ram adjustment at top): 665 mm Side upright opening: 550 mm Table surface: 1600 x 900 mm Passage opening in table: 1000 x 300 mm Table height above floor: 980 mm Ram surface: 1400 x 900 mm Drive power: 42.0 kW Machine weight: approx. 33.00 t Space requirement: approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic ram weight compensation, FIXED stroke, motorized ram adjustment, motorized central lubrication Electronic roller feeder (Normatic, AESL 500-2.8) with motor (Indramat), motorized lateral band guide, motorized height adjustment Tool change system Distance table - ram without tool change system approx. 765 mm Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Table thread tapping machine M1 - M10 Height adjustment via rack and hand crank, Motor 0.22 + 0.32 kW Motor rpm 1420 / 2770 Spindle rpm 480 - 580 Ijdpfx Aaoda I E Ds Njal Weight 100 kg Tapping chuck with key Under-table Connection cable with 16 A CEE plug

Kondisi: baru, Tahun pembuatan: 2025, agri-machinery-szsz2 Iedjxh Swuopfx Aa Noal

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-MF60HD Special Baler is ideally suited for compacting challenging and tough materials such as cans, PET bottles, metal buckets, and other tin containers. It also efficiently reduces plastics to a minimum volume. This specialist baler impresses with its ease of operation and large feed opening. Finished bales can be easily removed using the automatic bale ejector. By compressing these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and return the material to the recycling loop in a compliant manner. Pressing force: 13 tons Bale weight: 25 - 60 kg (depending on material) Bale size: 650 H (variable) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Feed opening: 600 W x 400 H mm Press cycle time: 25 seconds Iodpfxsbhy Twj Aa Noal Motor: 2.2 kW, 16 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Retainer claws to minimize material spring-back Cross-tying ensures secure containment of materials in finished bales Holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting: PET bottles Cans and tin containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with safety inspection (UVV) Machine color according to RAL Strapping bands Power supply 380 - 400 V (3 phase) PET baler, PET bottle baler, can press, can baler, special baler, baler, paper baler, waste paper baler, cardboard baler, carton baler, film baler, paper bale press, waste baler, waste press, recycling press, waste compactor, residual waste press

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm Iedpfxovuk Hro Aa Noal As is, where is, WITHOUT being put into operation

Kondisi: bekas, Tahun pembuatan: 1992, Pressing force: 80 t Stroke: 40 mm Stroke rate: 60–300 strokes/min Table surface: 730 x 750 mm Machine weight approx. 14 t Pneumatic clutch-brake combination Iaedpfx Aaswz Rv Es Nel PIV gearbox Compensation cylinder Tool monitoring: Unidor Centralized oil lubrication Safety door at the front Manual stroke adjustment Manual ram adjustment Decoiler: double-sided decoiler without drive, load capacity: 1,000 kg, adjustable brake Straightening machine Alba: GGVHY 200; 200 x 4 mm Feed unit Alba MA RIA 7; 300 x 3 mm; 2–40 m/min, S7 controller; Year of manufacture: 1978

Kondisi: bekas, Tahun pembuatan: 1983, druk160t10 Iaodjvuk E Uopfx Aa Nsl

Kondisi: baru, Tahun pembuatan: 2024, Press force 75 t Stroke 8–80 mm Stroke rate 80–200 strokes/min Ram adjustment 70 mm Table size 900x600 mm Ram area 900x470 mm Opening in table 450x180 mm Clearance between uprights (side) 500x350 mm Iaedpfx Asvfxl Rea Nsl Clearance between columns (side) 788 mm Total power requirement 10 kW Machine weight approx. 10 t Space requirement approx. WxDxH 1600x1200x2800 mm Oil circulation lubrication Adjustable hydraulic overload protection Ram balance cylinder Adjustable press force monitoring Thermal bearing monitoring Pneumatic clutch-brake combination Pneumatic safety door, front Light curtain safety system, front Swing door, rear 8x programmable die/tool protection 8x programmable electronic cams Conveyor belt control Distribution box 400V/230V LED workspace lighting Interface for coil line Mechanical roll block strips in table Coil line Elmea consisting of: - Elmea decoiler 3t - Elmea straightener 300x3mm - Elmea roller feeder 300x3mm Safety fence system for coil line.

Kondisi: bekas, Tahun pembuatan: 1996, Pressure: 63 t Column gap: 965 mm Stroke: 4 - 60 mm Stroke rate: 30 - 800 strokes/min Shut height (stroke + ram adjustment at top): 380 mm Iaodpjvut Rgjfx Aa Nsl Lateral column clearance: 355 mm Table area: 960 x 640 mm Through opening in table: 850 x 140 mm Table height above floor: 1,150 mm Ram area: 960 x 460 mm Drive power: 32.5 kW Machine weight approx. 13.00 t Space requirement approx. 3.3 x 1.7 x 2.9 m Ram adjustment: 80 mm Approved for automatic operation according to CE standard with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motorized ram adjustment, mechanical feed gripper type GF 160 Can be offered in its present condition, either without or with commissioning

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 63 t Stroke: 10 - 80 mm Strokes per minute: 75 - 400 Upright spacing: 1080 / 920 mm Shut height (stroke + ram adjustment at top): 450 mm Lateral upright passage: 300 mm Table area: 1000 x 550 mm Die opening in table: 700 x 160 mm Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Isdpfevut Ixox Aa Neal Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Required space approx. 2.8 x 2.7 x 3.1 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive control (PIV), pneumatic clutch/brake combination (manufacturer: Ortlinghaus), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram weight compensation Servo roll feed Kaiser KWV 250.

Kondisi: bekas, Tahun pembuatan: 1978, Pressure 150 t Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright spacing 930 mm Shut height (stroke + ram adjustment at top) 400 mm Lateral upright passage 650 mm Table surface 880x1300 / 1500x600 mm Through-hole in table 760 x 180 mm Table height above floor 1270 mm Ram surface 920x1000 / 1300x600 mm Weight 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed Iodpfovut Urox Aa Neal As is, as seen, WITHOUT commissioning Price for commissioning (with new control system) upon request

Kondisi: bekas, Tahun pembuatan: 1976, Pressing force 200 t Clear width between uprights 1,550 mm Stroke 30 - 160 mm Stroke rate 30 - 90 strokes/min Shut height (Stroke + slide adjustment, up) 745 mm Side frame opening 800 mm Table area 1,500 x 1,150 mm Pass-through opening in table 450 mm Table height above floor 810 mm Slide area 1,500 x 1,000 mm Drive power 38.0 kW Isdpfx Aevuubaja Nsal Machine weight approx. 26.5 t Space requirement approx. 5.1 x 1.6 x 3.7 m Slide adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Features: - Infinitely variable drive - Pneumatic clutch/brake combination (Ortlinghaus) - Hydraulic overload protection in the slide - Pneumatic slide weight compensation - Motorized slide adjustment Can be offered either without commissioning, or alternatively with new Siemens S7-1500 F control.