Beli Mengukur Kolom bekas (5.734)

Tahun pembuatan: 2004, Kondisi: bekas, Length – height: 3,000 mm Diameter: 190 mm Special steel – hard-chromed – piston rod of a hydraulic cylinder Support leg – 2,500 mm Hnodpfxjvimwvs Aa Njg Weight: approx. 560 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, 17001 Hsdpfx Aasx D A Hfo Nsng

Kondisi: baru, Max. stroke: 400 mm\nTable height: Floor to top of table 850 mm\nInstallation height: 600 mm\nSpeeds: Advance 120 mm/s, Press 13–4 mm/s, Return 170 mm/s\nPump capacity: 65 l/min (REXROTH – axial piston pump)\nMotor: 15 kW – 1500 rpm\nDimensions (LxWxH): 2,100 x 2,400 x 4,300 mm\nWeight approx.: 11,000 kg\nCapacity: 1,500 kN (150 tons at 245 BAR)\n\nOperating mode: Selection via key switch\n\n- Manual / setup mode via two-hand operation without light barrier on front (backside always active)\n- Automatic mode with two-hand operation at full speed (with active light curtain)\n\nMain cylinder: Ø 270 mm\nAuxiliary cylinders: 2 x Ø 70 x 50 mm\n\nMotor: 15 kW – 1500 rpm (IE-3)\nPump: 45 cc – 65 l/min REXROTH axial piston pump\nSpeed: Advance 120 mm/s – Press: 13–4 mm/s – Return: 170 mm/s\n\nClear width: 1,300 mm\nTable plate: 1,200 x 800 x 90 mm with T-slots\nRam plate: 1,200 x 800 x 600 mm with T-slots & ribbed reinforcement\n\nInstallation height: 600 mm (max. distance between table & ram plate)\nStroke: max. 400 mm\nTable height: 850 mm (floor to top of table)\n-----\n\nHydraulics: (hydraulic accessories on top of the press)\n\nControl block & valves (REXROTH proportional valves)\nPre-fill valve (NG.125)\n8-way guide\nHydraulic ram safety device\nMechanical ram safety for TDC\nPressure adjustment via PLC\nSpeed adjustment via PLC\nPressure-hold valve for 600 sec\nAir cooler\nAutomatic lubrication for guides\nAuxiliary motor\nAuxiliary pump\n\nControl: \n\nMain switch cabinet (mounted on the side of the press frame)\nSwiveling control panel\nSIEMENS S7 - 1200\nKTP 9” SIEMENS touchscreen (languages: DE, ENG)\nSafety PLC (SICK)\nLight curtain for front & rear work area (SICK 750 + 150 mm)\nSoft starter\nMobile two-hand control unit\nSECOMEA Ethernet connection\nLinear scale for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT)\n\nWork area lighting (2x, IP66)\n\n- 8 free I/O channels on the PLC for external connections\n-----\n- Safety railing around hydraulics\n- Side climbing ladder\n-----\nDocumentation: Operating manual in German (1x paper & 1x USB)\nHydraulic & electrical diagrams\nParts lists\nCE certificate\n\nStandard: EN 16092/1/3\n-----\n\nOverall dimensions: approx. 2,400 x 2,100 x 4,100 mm\nTotal weight: approx. 11,000 kg\n\nPaintwork: Frame RAL 7035 light grey Hsdpfxjmpfwde Aa Nong

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.824 mm, jarak lintasan sumbu Y: 897 mm, jarak gerak sumbu Z: 1.005 mm, gerak cepat sumbu X: 6.000 m/menit, pergeseran cepat sumbu Y: 8.000 m/menit, pergerakan cepat sumbu Z: 8.000 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan rotasi (maks.): 4.000 rpm, Perlengkapan: dokumentasi / manual, SHW UFZ 4 Travel distances • X-axis (bed): 5,824 mm • Y-axis (horizontal spindle head): 897 mm • Z-axis (vertical): 1,005 mm Control • CNC control: Heidenhain iTNC 530 Clamping plate • Clamping surface: 5,000 x 2,000 mm Transversely traversable rotary table • Diameter: 1,400 mm (flattened) • Cross-axis travel: 1,131 mm Rapid traverse • X-axis: 6,000 mm/min • Y and Z axes: 8,000 mm/min Horizontal and vertical milling head • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm • Internal coolant supply • Spindle orientation with cycle 13 • Tapping without compensation chuck • Milling head recently completely overhauled Automatic tool changer • Tool magazine for 45 tools Coolant system • Band filter Chip conveyor Splash and chip protection General overhaul including control retrofit in 2008 Hnsdpox Uw Egefx Aa Nsg About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, the supply of spare parts, on-site customer service, machine overhauls, as well as control modernizations. Services: - Used machinery - Spare parts - Customer service - Machine service - Machine overhauls - Control retrofitting ----- ___ Used machine - used milling machine - used travelling column milling machine - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metal mill - used metalworking milling machine - used cnc mill - cnc milling machines - milling machine - large part machining - cnc large part machining - milling - Heidenhain - MBM milling machine - MBM machine - column milling machine

Kondisi: sangat baik (bekas), Mikrometer bengkel presisi dari produsen Jerman ternama Mahr, model Marameter M, dirancang untuk pengukuran diameter luar dengan akurasi tinggi pada rentang 0–40 mm. Perangkat dalam kondisi sangat baik, berfungsi penuh, disimpan di kotak pelindung kayu asli. Hedpfxjxmlgtj Aa Neng Spesifikasi: • Rentang pengukuran: 0 – 40 mm • Tipe: Marameter M • Produsen: Mahr (Jerman) • Nomor katalog: 3206064 • Penggunaan: pengukuran presisi diameter luar / poros / elemen silindris • Rumah logam tahan aus • Lengan dengan ujung pengukur yang dapat diganti • Stabilitas dan repetabilitas pengukuran tinggi • Dilengkapi kotak kayu asli Kondisi: • Bekas, terawat sangat baik • Kalibrasi terakhir: 2023 • Siap digunakan di ruang pengukuran atau laboratorium

Kondisi: bekas, Tahun pembuatan: 1999, hidraulis ya kekuatan tekan 100 t berat mesin sekitar 2,9 t Hedpox U A Tvsfx Aa Njng

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical Details Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1270 / 1120 mm Control: SIEMENS 840 D Max. workpiece weight: 5000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Crossrail adjustment: 400 mm Ram slide horizontal travel (X): -2770 / +2275 mm Ram slide vertical travel (Z): 1250 mm C-axis: 360° (0.001°) Milling drive: 37 kW Milling speed range: 10 - 3000 rpm Table drive power: 100 kW Torque: 31784 Nm Feed range (X/Z): 0.1 - 15,000 mm/min Total power requirement: kW Machine weight approx.: 55 t Space requirement approx.: m Additional Information Used CNC vertical turning lathe for turning, drilling, and milling operations The machine was only commissioned in 2011. CNC Control: Siemens Sinumerik 840 D Number of NC axes: 4 (X, Z, C, crossrail adjustment) Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram slide stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Main spindle speed range: 1.0 - 320 rpm Main spindle drive power: 100 kW Drilling-milling spindle: 37 kW Crossrail travel path: 2 steps of 200 mm each Total electrical connected load: 218 kVA Travels: X-axis: -1650 to +2165 mm Z-axis: 1250 mm Rapid traverse X/Z-axis: 15 m/min Number of tool magazine positions: 80 positions in the chain magazine, including 60 x HSK 100 and 20 x Capto C6 12-position disc magazine for turning toolholders and attachment heads Coolant unit with filtration and circulation system Chip conveyor Oil mist extraction system 1 x Pallet with jaw boxes, diameter 1800 mm 1 x hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 x measuring probes Several tool holders for turning tools Special features: Pallet changer with two stations, equipped with a faceplate Ø1800 mm and a six-jaw compensating chuck with mechanical centrifugal force compensation Ø1800 mm. Hnodpfxox Uwtqe Aa Nog Note: The machine is set in a pit. Condition Description: About half a year ago, the Carnaghi cross roller bearing was replaced. All Siemens components in the control cabinet were completely renewed at the end of 2023. Additionally, the machine features a probe for tool measurement and an external Renishaw probe for workpiece measurement. As a special feature, a probe is installed on the Z-axis (Z1 axis). This provides an accuracy and time advantage since the tool does not need to be removed for measuring. Currently, this probe is out of operation and should be overhauled before recommissioning. Furthermore, the machine features a Rotomors six-jaw compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Kondisi: bekas, Tahun pembuatan: 1972, Pressure: 800 t Column gap: 3250 mm Hnodovuuhyspfx Aa Nog Stroke: 1100 mm Distance table/ram, stroke up: 1900 mm Table surface: 3100 x 1900 mm Blank holder pressure in table: 300 t Blank holder stroke in table: 300 mm Blank holder area in table: 2500 x 1800 mm Blank holder pressure in ram: 80 t Blank holder stroke in ram: 200 mm Blank holder area in ram: 2200 x 1000 mm Ram surface: 3100 x 1900 mm Lateral column opening: 900 mm Oil capacity: 4700 l Drive power: 200.0 kW Space requirement (LxWxH): 4.95 x 3.3 x 10.2 m Height above floor: 7.05 m With electro-hydraulic drive, hydraulically controlled blank holder in table and ram, hydraulic cutting impact damping. Dismantled and stored – Video at seller available before dismantling.

Kondisi: sangat baik (bekas), For sale: Lukas double-acting column hydraulic spreader. - LZR 12/300 Hnsdpfsv Dx Ntex Aa Njg - LZR 12/700 EN - Condition: Very good. - Price quoted for cylinder LZR 12/300: €450

Kondisi: bekas, Tahun pembuatan: 1969, Face plate diameter s mm Hsdpfx Aov Dx Dkja Nsng Swing diameter 1000 mm Turning height 1000 mm Machine weight approx. 5 t

Kondisi: bekas, Tahun pembuatan: 2005, tr-01 Hsdevuubgjpfx Aa Njng

Kondisi: bekas, Tahun pembuatan: 1999, Pressing force 30 t Hnedpfx Aevanvzoa Neg Sheet thickness 800 mm Accessories none Machine weight approx. 1.3 t

Kondisi: bekas, Tahun pembuatan: 1973, Pressure: 1,600 t Column gap: 4,100 mm Ram stroke: 1,450 mm Distance table/ram, ram up: 2,750 mm Hnedovut Ifopfx Aa Nog Distance table/blank holder, ram up: 2,200 mm Table area: 4,000 x 2,200 mm Ram force: 1,000 t Blank holder force: 600 t Blank holder stroke: 1,000 mm Blank holder area: 4,050 x 2,200 mm Ram area: 3,200 x 1,650 mm Cushion force in table: 360 t Cushion stroke in table: 300 mm Cushion area: 3,500 x 1,600 mm Lateral column passage: 1,100 mm Oil capacity: 9,000 l Drive power: 390.0 kW Weight: 250.0 t Space requirement (W x D x H): 5.95 x 4.3 x 10.5 m Height above floor level: 8.6 m With oil-hydraulic drive, hydraulically controlled die cushion in table and ram Dismantled, stored – video from seller available prior to dismantling.

Kondisi: bekas, Tahun pembuatan: 1970, Press force 40 t Stroke 150 mm Serial number 100091 Units in stock 2 Press force and stroke adjustable Press force 25 t Weight per unit 1.5 t Hedsvxltbspfx Aa Njng Safety light curtains: yes, on both units

Kondisi: bekas, Tahun pembuatan: 1994, Tekanan 600 t Langkah 100 mm Jumlah langkah 45 /menit Jarak antar tiang 580 mm Tinggi pemasangan 460 mm Luas meja 550 x 620 mm Luas pelat tekan 550 x 430 mm Penyesuaian pelat tekan 50 mm Hnodpfx Aaow U Ekpj Nsg Daya penggerak 15,0 kW Berat 13,5 t Ruang yang dibutuhkan (PxlxT) 1,5 x 2,45 x 2,75 m Jarak gaya nominal 1,7 mm Energi nominal 10,2 kJ dengan penggerak engkol, rem roda gila, kopling hidrolik, penyeimbangan rangka, kontrol dengan pengawasan mandiri

Kondisi: bekas, Tahun pembuatan: 1994, Hans Schoen NH65 press Pressing force: 65 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the production of a video is not possible. Hedpevrk Epsfx Aa Nong Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, it is not possible to provide additional images. +++++

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 - 42 /min Distance table/ram, large stroke at top, adjustment at top: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral clearance between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 - 250 mm Programmable slide travel per guide: 0 - 140 mm Transfer device stroke rate: 42 /min Drive power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Hedpfxjvuukuo Aa Njng Height above floor: 6.95 m Height below floor: 1.0 m with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking, tool clamping system for table and ram, motorized central lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 - Cleaning system (manufacturer Beyss, year 1989) as is and lies, WITHOUT commissioning, disassembled and stored The press was installed in a soundproof cabin by the previous owner, which is not included in the scope of delivery Video of the machine prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1970, Adjustable stroke: yes Machine weight: approx. 9.5 t Serial number: 10457/2 Pressing force: 160,000 kg Strokes of the ram: 41 strokes/min +++++ Hnedpfxevvx Exo Aa Njg Please note that the machine is dismantled and ready for loading. For this reason, it is not possible to carry out a demonstration under power or to produce a video. Furthermore, our listing contains the most representative photos in the best possible quality. Unfortunately, sending additional images is not possible. +++++

Kondisi: bekas, Tahun pembuatan: 1993, de-to-hu-001 Hnjdpfsvuucqsx Aa Nsg

Kondisi: bekas, Tahun pembuatan: 2003, Tekanan . t Hsdpfxjw Syfcs Aa Nong Jangkauan . mm Langkah . mm Kebutuhan daya total . kW Berat mesin sekitar 4 t

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force 200 t Upright clearance 1650 mm Stroke 600 mm Distance table/ram, max. stroke up, adj. up 1200 mm Table area 1600 x 1250 mm Blank holder force 80 t Blank holder stroke 300 mm Blank holder area 1300 x 900 mm Table height above floor 800 mm Ram area 1600 x 1250 mm Oil capacity 2000 l Drive power 43.0 kW Hsdpfx Aexwdrvsa Nsng Weight 25.0 t Space requirements (WxDxH) 2.9 x 2.3 x 5.8 m Height below floor 0.85 m Approved for manual loading according to German accident prevention regulations (UVV) with oil-hydraulic drive, pressure/time and stroke dependent control, hydraulic cushion in the table, ejector in the ram, hydraulic cutting shock damping with motorized adjustable depth stop, ram locking, two-hand operation as is and where is, WITHOUT commissioning

Kondisi: bekas, Tahun pembuatan: 1960, Tekanan 1000 t Langkah 600 mm Hodpfxow Syd Ej Aa Njng Berat mesin sekitar 4 t

Kondisi: bekas, Tahun pembuatan: 1999, Pressure 400 t Stroke 800 mm Column width 2820 mm Side column opening 950 x 1100 mm Distance table/ram (stroke up) 1600 mm Table surface 2800 x 1200 mm Blankholder force in table 150 t Blankholder stroke in table 200 mm Blankholder surface in table 2000 x 800 mm Table height above floor 650 mm Ram surface 2800 x 1200 mm Speed down 420 mm/s Speed up 300 mm/s Working speed 17.5 - 29.5 mm/s Oil capacity 2500 l Drive power 75.0 + 22.0 kW Hnodpfx Asv Sva Sea Nog Weight 50.0 t Space required (WxDxH) 4.1 x 2.8 x 7.2 m Height above floor 6.15 m Approved for manual loading in accordance with CE standards with electro-hydraulic drive, pressure/time- and stroke-dependent control, hydraulic blankholder in the table, hydraulic ram locking, two- and four-hand operation.

Kondisi: bekas, Tahun pembuatan: 1997, 1 Hjdpfovuk T Eox Aa Njng

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 500 t Upright spacing: 3,200 mm Stroke: 1,250 mm Distance table/ram, max. stroke up, adjustment up: 1,810 mm Table size: 3,000 x 1,900 mm Cushion pressure in ram: 150 t Cushion stroke in ram: 200 mm Cushion area in ram: 2,400 x 1,200 mm Ram area: 3,160 x 1,900 mm Downstroke speed: from 400 mm/s Return stroke speed: 250 mm/s Working speed: 18 - 58 mm/s Height above floor: 6.5 m Drive power: 90.0 + 36.5 kW Weight: 110 t Approved for manual loading operations according to German accident prevention regulations (UVV) Features: Hodpfxevuk Txs Aa Nong - Oil-hydraulic drive - Hydraulic cushion in ram - Ram lock Year of construction: 1976 – Modernized: 1991 Condition: As is, not commissioned, partially disassembled and stored