Beli Mesin Perkakas bekas (78.286)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Metba MB1 with 3-Axis Digital Readout Technical Data: >> Year of manufacture: approx. 1980 >> 3-axis digital readout Mitutoyo >> Rigid angle table >> Spindle speed: 45 - 2050 rpm >> Feed on 2 axes from 11-490 mm/min >> Travel X/Y/Z: 300/150/340 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical quill - ISO 40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout Mitutoyo Ppjdjydc Spopfx Abuel >> Coolant system >> Various tool holders >> Operating manual About the machine: Offered here is a Metba MB1 universal milling machine in very good condition. The Metba operates smoothly, even at high spindle speeds. The machine has minimal backlash and all axes move freely. The MB1 comes from a private owner and has seen only light use. Mechanically and electrically tested. The digital readout makes work easier and even more accurate. Take the opportunity to inspect and test the machine under power on site.

Kondisi: diremaj di bengkel (bekas), panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 160 mm, panjang umpan sumbu Z: 340 mm, Updated Machineseeker Description (with axis travels) Deckel FP1 Aktiv – 3 axes – partially overhauled – immediately ready for operation Ppedpfex Tdy Iex Abusl Offered here is a Deckel FP1 Aktiv in technically tested and partially overhauled condition. The machine has been professionally refurbished and is in reliable, ready-to-use condition. Ideally suited for workshops, toolmaking, training, as well as single-part and small series production. This is not an unchecked used machine, but a technically reconditioned tool machine with a clearly defined scope of performance and predictable delivery time. Technical data and features Travel paths: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop-tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of existing settings Renewal of all lubricants Replacement of selected standard parts and various wear parts Repainted in RAL 7035 / 7016 The deliberate decision for a partial overhaul offers an optimal compromise between operational safety, cost efficiency, and availability. A complete overhaul of the guideways was not performed, as there was no technical necessity to do so. Scope of delivery Machine loaded free onto truck Delivery time approx. 12 weeks

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.680 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 600 mm, tinggi total: 2.500 mm, panjang total: 2.700 mm, lebar total: 2.000 mm, jangkauan kerja: 1.680 mm, daya motor spindle: 2.200 W, jumlah lengan penjepit: 12, Perlengkapan: dokumentasi / manual, 4-Axis CNC Machining Center ISEL Sonderanlage - 06/2007 X1680 Y1000 Z600 - Spindle 2.2 kW / 15,000 rpm - Table 1660×1750 mm - 4th rotary axis Ø1660 L1750 mm - PC + MAYKA (on integrated PC) Ready for operation, can be viewed under power Location: Industrial area 06510 CARROS 4-axis CNC Machining Center/Milling Machine from ISEL (isel automation – Germany). Custom-built machine "Sonderanlage" (manufacturer’s plate), year 06/2007, serial no. 293215/1, CE marked. Machine mainly used for foam machining (precision applications), but this is a true CNC machining center: machinable materials depend primarily on tools and parameter settings. Dimensions: length 2.70 m - width 2 m - height 2.50 m. Operating hours counter not available in this configuration. Mayka software installed and functional on the PC. Last test on 13/01/2026: all movements OK. Can be inspected and tested onsite: axis travels + start-up possible. Chip extraction system included but not functional (needs servicing). Operating hours: not available (counter not accessible) Travels: X 1680 mm / Y 1000 mm / Z 600 mm Usable table size: 1660 × 1750 mm (T-slots/clamping) 4th rotary axis included: Ø 1660 mm, length 1750 mm Drivetrain: ball screws + belts, linear guides Motors: servo drives Spindle: ISEL F8LI2S2/-8-043, 2.2 kW, 15,000 rpm, manual tool change Tooling included: 1 tool holder + 11 collets (spindle specific system) + clamping nut Cooling: air-cooled spindle + chiller included Safety: fully enclosed machine + emergency stop Noise level: approx. 50 dB during operation, 65 dB during Y-axis movements Power supply: 400V 3-phase, 16 A - compressed air not required Lubrication: none Control / PC / Software Psdpfxoycqu Ne Abujpl Electrical cabinet included Integrated PC + monitor + keyboard (Windows 7) MAYKA installed and fully functional on the PC (no separate dongle/USB key required) Maintenance / Service • March 2019: Computer replaced • March 2019: All drive belts replaced • March 2019: iCCE10 CANopen PCIe board (1 channel) replaced • Last check: 13/01/2026 - all movements verified OK Make: ISEL Model: Sonderanlage Year: 06/2007 Serial no.: 293215/1 Axes: 4 (with 4th rotary axis) Travels: 1680 × 1000 × 600 mm Table: 1660 × 1750 mm Spindle: 2.2 kW - 15,000 rpm Power supply: 400V 3-phase - 16A PC/software: Integrated PC + MAYKA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 135 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6693371/1, jarak pergerakan sumbu X: 1.480 mm, jarak lintasan sumbu Y: 1.090 mm, jarak gerak sumbu Z: 617 mm, tinggi total: 2.320 mm, panjang total: 2.800 mm, lebar total: 2.000 mm, jangkauan kerja: 1.480 mm, daya motor spindle: 3.600 W, diameter alat: 32 mm, Perlengkapan: dokumentasi / manual, CNC 4-Axis Machining Center ISEL FlatCom XL142/112 EC-Servo - 10/2017 X1480 Y1090 Z617 - 3.6 kW spindle / 17,750 rpm (ER32) - 135.53 h - 4th axis Ø600 L1000 - PC + remote Ready for operation, can be inspected under power Location: Industrial zone 06510 CARROS CNC 4-axis machining center / milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no. 669371/1, CE-marked. Dimensions: length 2.80 m - width 2 m - height 2.32 m Machine in “as new” condition, very little use, fully tested OK. Hours: 135.53 operating hours / 144.04 hours under power Axes: 4 axes, with 4th rotary axis usable Ø 600 mm, length 1000 mm Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Table size: 1540 × 1500 mm – T-slots Transmission: ball screws – linear guides Drive: EC-Servo motors SPINDLE / TOOLING Spindle ISEL VKH75/26-75T: 3.6 kW, 17,750 rpm ER32 collet Pneumatic tool change (pre-equipped): tool magazine not included, but easily added (via supplier) 2 tool holders (1 mounted on the machine) Tool probe included Cooling: air-cooled spindle + chiller included Control / PC / Software ISEL control + REMOTE software License included and transferable No dongle/keys/codes required PC + monitor + integrated keyboard (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16A Compressed air required: yes, 8 bar (for pneumatic functions) Chip extraction: not included Lubrication: none Protective enclosure + emergency stop Noise level: approx. 50 dB max Dust extraction (connection provided): no Condition / Testing Condition: “as new”, no known defects (play, errors, sensors: none) Last test: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software + license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Some clamping accessories + tool probe Ppodpoycqm Ejfx Abujl End mills / drills included (lot visible in photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial no.: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travel: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 h / 144.04 h

Kondisi: bekas, Tahun pembuatan: 1985, 1 unit mesin frais universal, merk Deckel tipe FP 4 MA, nomor seri 2204.1463, tahun pembuatan sekitar 1985, kontrol Deckel Contour II, meja frais sekitar 800x500 mm, 7 alur-T, sekitar 25 holder alat. Ppedpfx Abjyaxl Doujl

Kondisi: bekas, 1 unit mesin frais alat universal, merk Deckel tipe FP 4 A, nomor seri 2204-1177, kontrol Grundig Elektronik, meja frais sekitar 800x500 mm, 7 alur T Ppjdjyaxk Tspfx Abuel

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Taper spindle: ISO 40 RPM: 60-4200 (variabel dalam 2 gigi). Perjalanan: X655 Y315 Z430 mm. Ukuran meja: 1245 x 230 mm Podpoya Hb Tefx Abuspl Feed otomatis: X & Y Kecepatan cepat: X & Y. Motor: 3 HP. Pembacaan digital: Resson RD-12 (X & Y). Tahun: 2010 Negara asal: Taiwan. Ukuran (P x L x T): 1750 x 1600 x 2300 mm. Berat: 1000 kg. Dengan penjepitan alat pneumatis, fungsi pengeboran pada kepala dengan feed otomatis (gerak 130 mm), ragum, meja indeks, dan banyak perlengkapan. Semua mesin kami diuji dan diservis sebelum pengiriman.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, A completely overhauled universal tool milling machine Deckel FP2 (year of overhaul: 2019) is available. Travel distances X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Psdpfx Abovf Iy Deuopl

Kondisi: baik (bekas), Tahun pembuatan: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control, Year of Manufacture 1990, Fully Refurbished in 2014, Excellent Condition, CE-Compliant!! The machine comes from Continental’s training workshop. Technical Data: Year of manufacture: 1990 Fully refurbished: 2014 Digital Readout: 3-axis active digital display HEIDENHAIN TNC 113 Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Pedpfxjyalcpj Abujpl Table type: Swivel table Clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: - Heidenhain TNC 113 control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system About the Machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a facility where it saw very little use, primarily for training purposes. The machine features a user-friendly control system. Additionally, it offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is straightforward, simply by swiveling the vertical head aside. The guideways are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Deckel under power at our facility. You can find further milling machines from renowned manufacturers on our website.

Kondisi: bekas, Tahun pembuatan: 1996, jam operasional: 8.900 h, Fungsionalitas: berfungsi sepenuhnya, Pusat pemesinan vertikal DMG Model: DMU 50 V Tahun: 1996 5 sumbu Gerakan memanjang: 500 mm Gerakan melintang: 380 mm Gerakan vertikal: 380 mm Spindel: BT 40 Kecepatan spindel: 8.000 RPM Jumlah alat dalam magazine: 24 buah Kontrol: Deckel Maho MillPlus Pedpfxsyahh Ij Abuspl Jam kerja spindel: 8.900 Antarmuka: RS-232 C Arbor pendek

Kondisi: bekas, Tahun pembuatan: 2008, Kami menawarkan mesin frais alat bekas Lagun FTV 4 SP ini, tahun pembuatan 2008. Pedpsx Tn S Uefx Abuspl

Kondisi: bekas, Станок для закругления кромок WemaProbst RHM 200 Ppodpfxsv Ii Tko Abuel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, de-XYZ SMX SLV 3-Achs-Turmkopf-Fräsmaschine ProtoTRAK | SMX Steuerung (2007) 3-Achs-CNC-Kapazität (X-Achse, Y-Achse & Pinole) Spindelaufnahme ISO 40 Spindeldrehzahlen: 70 - 3600 U/min Tischgröße: 1473 x 305 mm Tischverfahrweg: X - 1000 mm Y - 410 mm Knieverfahrweg: Z - 413 mm Pinnenhub: Z - 127 mm Pneumatischer Spindelschnellspanner Verkauf inklusive umfangreichem Spindel-Werkzeugsortiment Kühlmitteleinrichtung Baujahr: 2007 Gewicht: 1850 kg Stromanschluss: 18A *Zum Verkauf bei Jet Machinery Ltd.* Jet Machinery Lager-Nr.: #79109 Maschinen-Seriennummer: 12308 Preis: £14.950,00 zzgl. MwSt. Ppedpfx Abox Tiq Ssusl Alle Angaben erfolgen nach bestem Wissen, sind jedoch unverbindlich. Wir empfehlen Interessenten, relevante Details eigenständig zu prüfen. Hinweis Arbeitsschutzgesetz 1974: Als Anbieter ist es uns nicht möglich, die Einhaltung aller Vorschriften, insbesondere zum Thema Schutzvorrichtungen, für Ihre spezielle Anwendung sicherzustellen. Wir empfehlen Interessenten, die Maschine vor Inbetriebnahme durch einen Schutzausrüstungsspezialisten prüfen zu lassen.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3R-656.31-3P, -BARU- Probe pengukur System 3R dan Erowa. Probe pengukur terdiri dari bagian-bagian berikut: 1. 1 x Holder ITS50 atau Macro HP 2. 1 x Probe pengukur Renishaw dengan perlindungan terhadap tabrakan di semua sumbu 3. 1 x Stylus pengukur Renishaw M4 dengan bola berdiameter 3 atau 5 mm Psdpfov A T Izjx Abuspl 4. 1 x Sekrup pengunci pegas 5. 4 x Sekrup pengatur

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 2 rpm, panjang meja: 900 mm, lebar meja: 530 mm, jenis arus masuk: tiga fasa, panjang total: 900 mm, lebar total: 530 mm, kecepatan rotasi (maks.): 5.000 rpm, kecepatan rotasi (min.): 2 rpm, masa garansi: 3 bulan, jangkauan kerja: 900 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Kami menawarkan mesin frais alat Deckel FP 4-60T yang telah direkondisi penuh dengan kontrol Dialog 11, tahun pembuatan 1992. Podpsx Sv Ubefx Abuspl Deckel: FP 4-60T Kondisi: Direkondisi total Penukar alat: 24 posisi Kontrol: Dialog 11 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 3.150 rpm, kecepatan spindel (min.): 31 rpm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 6.300 rpm, kecepatan rotasi (min.): 31 rpm, masa garansi: 3 bulan, Perlengkapan: dokumentasi / manual, Kami menawarkan mesin frais alat DECKEL FP 2NC yang direkondisi dengan kontrol TNC 320, tahun produksi 1982. Produsen: DECKEL Model: FP 2NC dengan TNC 320 Pjdpfx Abex Sv Rceuepl Tahun: 1982 Kondisi: Telah direkondisi total Kontrol: TNC 320 Tipe mesin: Mesin frais alat Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baru, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 rpm Speed control: Infinitely variable Podpfxeir If Dj Abuspl Mechanical speed ranges: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Cross feeds X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral pitch threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Quill taper: MT 4 Quill travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1,500 kg Features: - Machine tool accuracy in accordance with DIN 8605 - Infinitely variable speed control (2 speed ranges) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast iron machine base - Adjustable precision taper roller bearings in main spindle - Easy-to-use feed gearbox with large feed range running in a closed oil bath - Low-maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four holders - High rear splash guard and integrated LED trough light - Front pull-out chip tray - Slip clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine feet (set of 6) - Two emergency stop pushbuttons - Foot pedal with double braking system (mechanical and electrical) - Chuck guard, tool post guard, and leadscrew/feedscrew cover with limit switch interlock, compliant with European safety standards (CE) - Coolant system - 2 fixed center points - Reducing sleeve for main spindle - Operating tools - Tool kit in tool box - Operating manual with spare parts list

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Dear Sir or Madam, We hereby offer a DECKEL FP1 three-axis milling machine, upgraded with modern safety features. These later model machines are equipped, among other things, with central lubrication, an electric coolant pump, and a brake motor. The control cabinet can be quickly disconnected from the machine thanks to a Harting connector. Safety components are also connected to the control cabinet using this connector type, so that handling is in no way impaired. The retrofitted safety features—which we offer for every machine type—come with a 12-month warranty! *The electronic spindle guard can be adjusted in multiple axes and is designed to prevent access to the working spindle as well as to protect against flying chips, coolant, etc.* *The electronic spindle guard cap prevents access to the rotating spindle stub and tool clamping system.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid feed: 1200 mm/min Ppedpex Rvlqefx Abuol Equipment and accessories include, among others: 3-axis digital display with Heidenhain active control, coolant device, central lubrication, machine mounts, technical documentation, electronic spindle guard, electronic spindle guard cap Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tooling directly - Upon request, we can install extra accessories such as safety features, etc. - We are happy to take care of shipping and/or installation for you.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis Heidenhain active digital readout and stepless feed – Excellent condition Technical data: >> Year of manufacture: 1982 Machine no.: 2201-5598 >> Rotary-swivel-tilting table (newly planed) >> Spindle speed: 25 - 2500 rpm Podox Ig Dxopfx Abujpl >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.0/4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on the spindle carrier >> Extendable vertical quill and horizontal quill - SK40 taper >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain TNC113 active digital readout >> Coolant device >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in very good condition. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed on all three axes is steplessly adjustable; furthermore, each axis features rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter dimensions and the machine will automatically traverse to them. An oil change has been carried out. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on-site. The machine is available immediately.

Kondisi: bekas, CNC milling machine DECKEL type FP 3 A Tool milling machine with handwheels, also suitable for manual operation Serial no. 2206 - Year of manufacture: 1982 CNC path control GRUNDIG CNC 2101 Travel distances X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle taper SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, infinitely variable Rapid traverse speed 1200 mm/min Spindle drive motor power 2 / 4 kW, pole-changeable Power connection 380 Volt, 50 Hz - CNC path control GRUNDIG CNC 2101 - Mechanical handwheels for all three axes - Universal swivel, tilt, and rotary table - Vertical milling head swiveling and manually adjustable by 200 mm Pedsv R E Rdepfx Abujpl - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Safety enclosure at front and sides with 3 folding doors - Control cabinet mounted separately (L x W = 600 x 430 mm) Space requirements L x W x H 1900 x 1700 x 1950 mm Weight 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Kondisi: siap digunakan (bekas), Pengasah alat, pengasah mata bor, Schanbacher S3-50 Pabrikan: Schanbacher Tipe: S3-50 Tahun: 2012 Dimensi: 460 × 600 × 1260 mm Psdpjx Dbltsfx Abuspl Diameter bor: 3–50 mm; Sudut ujung: 90°–140° Termasuk: Penutup pelindung, sistem ekstraksi debu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, 2 Stück auf Lager, beide waren nur für einen kurzen Einsatz im Gebrauch. Lastkorb 1600 mm x 800 mm. Programmierbare Steuerung. Psdpfx Aeramamobuepl

Kondisi: baik (bekas), Translation: Travel paths: 300 x 150 x 355 mm Table size: 700 x 250 mm Spindle taper: ISO 30 Spindle speeds: 58–2000 rpm With digital readout Various accessories Pedpfx Abju Eqixeuspl MARCELS MASCHINEN CH

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 90 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, Perlengkapan: dokumentasi / manual, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, making it in top condition and technically, visually, and geometrically hardly distinguishable from a new machine. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Travel range X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Psdpfxsx Irwds Abujpl Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table configuration: Rigid angle table or rotary-tilt-swivel table Further equipment and accessories: including 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request... Our Service Promise to You: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color for your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If desired, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation

Kondisi: baik (bekas), Tahun pembuatan: 1996, panjang pemakanan sumbu X: 700 mm, panjang umpan sumbu Y: 550 mm, panjang umpan sumbu Z: 500 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, kecepatan pemakanan sumbu X: 10.000 m/menit, laju pemakanan gandar Y: 10.000 m/menit, laju pemakanan sumbu Z: 10.000 m/menit, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 25 rpm, gerak cepat sumbu X: 10.000 m/menit, pergeseran cepat sumbu Y: 10.000 m/menit, pergerakan cepat sumbu Z: 10.000 m/menit, diameter pemasangan: 40 mm, panjang meja: 1.000 mm, lebar meja: 500 mm, berat keseluruhan: 3.500 kg, Sumbu X / panjang 700 mm Sumbu Y / melintang 550 mm Sumbu Z / vertikal 500 mm Ukuran meja 1000 x 500 mm Rentang kecepatan poros tanpa langkah dalam 3 langkah gigi 25 - 4200 rpm Dudukan alat SK 40 Rentang umpan X-Y-Z 1 - 10000 mm/menit Perpindahan cepat X-Y-Z 10000 mm/menit Berat sekitar 3500 kg Kontrol: Heidenhain TNC 407 - TNC 415 Pjdpfx Aoxg Rxbobuspl