Beli Mesin Press bekas (80.452)

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system Dkedpfx Asvtx Inenzet • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 130 t, lebar meja: 750 mm, panjang meja: 1.000 mm, gaya punching: 130 t, lubang tembus di meja: 220 mm, diameter silinder: 55 mm, penyesuaian langkah: 140 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated via an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in mass production Operator safety-oriented design (light curtain + safety systems) Low maintenance requirements with centralized automatic lubrication Production-ready operation with PLC control + dual hand/foot control Fields of Application Cold cutting and punching operations Cold breaking applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-sided guided ram • Spheroidal graphite cast iron connecting rod and gearboxes Dodpjvtyvgefx Anzskt • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Complies with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die set as per request • 8-guideway slide system ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Ton Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between side frames: 450 mm Ram adjustment (stroke setting): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring length: 790 mm Side anchoring length: 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, lebar meja: 700 mm, panjang meja: 880 mm, tinggi meja: 850 mm, lubang tembus di meja: 200 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 110 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief for frame and welded parts via vibration - Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide (ram) with 8-way guide - Ram with cushioning cylinder - Steel cast parts for ram, connecting rod, and slide block – GS52 - High strength, solid one-piece crankshaft – 4140 - Bronze connecting rod bearing (Zr14) - Rear flywheel - Spare bolster plate - Hydraulic overload protection - Motorized slide adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with time delay - Electrical counter - PLC application with touchscreen – DELTA - Electrical switchgear – SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electrical system, valves, double-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Interlock position switch and control panel - Safety block - Protective guards in accordance with CE requirements TYPE D-TYPE MONOBLOCK FRAME Capacity 100 Ton Distance Between Table and Slide 450 mm Distance Between Side Frames 960 mm Slide Adjustment 85 mm Approximate Width 1230 mm Approximate Depth 1650 mm Approximate Height 2500 mm Bolster Hole Diameter 200 mm Bolster Size 700 / 880 mm Die Fastening Slot Diameter 50 mm Ram Size 245 / 410 mm Bed Height from Floor 850 mm Stroke Adjustment 10 / 110 mm Strokes per Minute 50 spm Motor Power 11 kW Dedpfx Anovxhprozekt Motor Speed 1450 rpm Approximate Weight 7,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 125 t, lebar meja: 700 mm, panjang meja: 900 mm, lubang tembus di meja: 210 mm, penyesuaian silinder hidrolik: 100 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame o Vibration stress relief applied to the frame and welded parts o Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide guided in 8 bronze bushings o Ram with cushion cylinder o Steel cast parts: ram, connecting rod, and pitman – GS52 o High-strength solid crankshaft – 4140 Dodpfxjvxhqve Anzokt o Bronze bushings inside the connecting rod (Zr14) o Rear-mounted flywheel o Spare bolster plate o Hydraulic overload protection o Motorized table-ram adjustment o Automatic central lubrication o Pneumatic pedal with latch and dual-hand control with timer o Electric counter o PLC control and touchscreen – DELTA o Electrical switchgear: SIEMENS-SCHNEIDER o CE conformity – OPTIONAL o Finger protection light curtains – SICK, LEUZE o Safety PLC (controls all electrical system, valve, dual-hand and pedal) – PILZ o Double-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in compliance with CE safety directives TYPE D-TYPE MONOBLOCK FRAME Capacity 125 Ton Bed – Ram Distance 500 mm Distance Between Housings 1000 mm Ram Adjustment 100 mm Approx. Press Width 1250 mm Approx. Press Depth 1750 mm Approx. Press Height 2850 mm Table Bore Diameter 210 mm Table Size 700 / 900 mm Die Clamping Slot Diameter 55 mm Ram Size 340 / 550 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 125 mm Strokes per Minute 50 spm Motor Power 11 kW Motor Speed 1450 RPM Approximate Weight 8,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, lebar meja: 850 mm, panjang meja: 1.150 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration applied to main body and welded components - Table parallelism and perpendicularity tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-way gibs - Ram with cushioning cylinder - Ram, connecting rod, and clutch parts, made of cast steel, GS52 - High-strength monobloc crankshaft – 4140 - Bronze bushings inside connecting rods (Zr14) - Rear flywheel - Spare bolster plate Dkjdpfx Asvyr D Ajnzet - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with interlock and dual-hand control with timer - Electric counter - PLC control and touchscreen panel – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Safety light curtains for finger protection – SICK, LEUZE - Safety PLC (controls all electric system, valves, double-hand and pedal) – PILZ - Double-coil safety valve – GPA, TOPAIR - Locked position limit switch and main panel - Safety block - Protective guards in compliance with CE standards MODEL: D-TYPE MONOBLOCK FRAME Capacity: 250 Ton Shut Height (Ram to Table Distance): 520 mm Clearance Between Side Frames: 1230 mm Ram Adjustment: 150 mm Approximate Width: 1600 mm Approximate Depth: 2100 mm Approximate Height: 3400 mm Table Bore Diameter: 240 mm Table Dimensions: 850 x 1150 mm Die Clamping Slot Diameter: 60 mm Ram Dimensions: 470 x 900 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 – 160 mm Strokes per Minute: 40 spm Main Motor Power: 22 + 2.2 kW Motor Speed: 1450 rpm Approximate Weight: 16,000 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force produced via an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in large bolster and heavy die applications due to their rigid frame design. CRONOSSTECH CEHP 200 – H Type Eccentric Press 200 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With a monoblock frame, eight-point guided slide system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies due to 1000×2000 mm large bolster - Die/equipment protection with hydraulic overload safety device - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety with light curtain (LEUZE) - Quick production changeovers with 99 die memory slots Areas of Use - Punching/cutting/forming operations requiring large bolster - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame structure • Pneumatic clutch–brake • T-slotted auxiliary plate • Eight-point guided slide • Adjustable stroke on single connecting rod • Slide balancer cylinder • Fully automatic precision lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse movement • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain safety barrier • Gear group in sealed oil chamber • Double solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety guard for bolster front • Custom die manufacturing ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower bolster usable area: 1000×2000 mm Upper bolster usable area: 1000×2000 mm Fixed stroke length: 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max closed die height: 600 mm Min closed die height: 480 mm Side window width: 600×600 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric/cranckshafts: 2 Safety device: Hydraulic Electrical equipment (panel): Siemens – Schneider Lubrication system: Automatic Display/PLC/Inverter: Siemens – Pilz Safety barrier: Leuze Dkjdpfxox N Ruqs Anzjt Operating modes: 4-position Die memory: 99 slots Mounting: Floor-mounted Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. dimensions (L×W×H): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: If you require any modifications to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), gaya penekanan: 250 t, panjang langkah: 160 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, kedalaman tenggorokan: 350 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, excentric-press; an excentric mechanism-powered type of mechanical press used in cold forming operations such as punching, cutting, and die shaping. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-oriented design (light curtain + safety systems) Low maintenance with central automatic lubrication PLC control + dual hand/foot pedal operation for production-ready use Applications Cold cutting and punching operations Cold extrusion applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel fabricated frame • Four-point slide guidance • Nodular cast iron connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Central automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor function • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per request • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Tons Throat depth: 350 mm Table–ram distance: 520 mm Slide–table distance: 630 mm Distance between side walls: 520 mm Dkedpfxsx N Nfbs Anzet Ram adjustment (shut height): 150 mm Approx. press width: 2000 mm Approx. press depth: 2500 mm Approx. press height: 3100 mm Front anchorage size: 930 mm Side anchorage size: 1430 mm Table hole diameter: Ø250 mm Table size: 700×1100 mm Die clamping hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: Please contact us if you require alterations in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Mesin press pneumatik untuk pengeleman kayu pada ketebalan. TECHFA tipe PTD 6000 Ukuran maksimum elemen yang direkatkan: Dodpfxjyivr Hj Anzokt - panjang 6300 mm - lebar 160 mm - tinggi 850 mm Press dibagi menjadi 4 bagian.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Tahun pembuatan: 2009. Dksdpfjzq Aq Djx Anzjt Panjang tekukan: 3100 mm Gaya tekan: 160 ton Ketebalan maksimum pelat: 6 mm dengan kekuatan material 45 kg/mm² Nomor seri: SN20090122 Negara pembuatan: Britania Raya

Kondisi: bekas, Tahun pembuatan: 2003, Produsen: Haulick + Roos GmbH Tipe: RVD 3000-2500 Tipe Mesin: Mesin Pemotong Berkinerja Tinggi Tahun Pembuatan: 2003 Kondisi: bekas Kekuatan Tekan Nominal: 3.000 kN Kekuatan Tekan: 300 t Frekuensi Langkah: 20–180 langkah/menit Daya Penggerak: 80 kW Langkah Pendorong: 20–160 mm Pengaturan Pendorong: 150 mm Tinggi Pemasangan Alat: maks. 450 mm Panjang Alat Maksimal: 2.500 mm Lebar Alat Maksimal: 1.000 mm Luas Meja: 2.450 × 1.000 mm Luas Pendorong: 2.500 × 950 mm Bukaan Pelat Penjepit: 2.250 × 350 mm Berat Mesin: sekitar 46.000 kg Arah Pengguliran Pita: dari kanan ke kiri Koneksi Jaringan: 400 V Frekuensi: 50 Hz Daya Koneksi Maksimal: 80 kVA Sekring Maksimal: 250 A Bantalan Penarik: tidak ada Komponen Sistem: Mesin Pemotong Berkinerja Tinggi Haulick + Roos RVD 3000-2500 Penggulung Koil DIMECO Tipe 23S1/D/VV Tahun Pembuatan: 2003 Berat Sendiri: 1.450 kg Kapasitas Angkut Maksimal: 4.000 kg Pengumpan Rol DIMECO Tipe 1681/17/BVV Tahun Pembuatan: 2003 Berat Sendiri: 540 kg Mesin Pelurus ARKU Dkodozrz Dxjpfx Anzet Data Teknis Pengumpan Rol: Lebar Pita: 5–420 mm Ketebalan Pita: 0,1–5 mm Luas Penampang Pita Maksimal: 1.000 mm² Kecepatan Pita: hingga 125 m/menit Panjang Pengumpan: 0,1–999,9 mm Akurasi Pengumpan: ±0,1 mm Diameter Rol: 100 mm Pengaturan Tinggi Pita: 100 mm secara manual mekanis Catatan: Panduan pendorong harus diperbarui. Sistem saat ini masih beroperasi dan berfungsi. Untuk pembongkaran lengkap dan pemasangan panduan baru, ada penawaran dari produsen sebesar sekitar 200.000 €. Video sistem yang sedang beroperasi akan kami berikan jika diminta.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: 31230 12050, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 120 t, panjang meja: 3.100 mm, kapasitas tangki oli: 190 l, berat keseluruhan: 8.000 kg, Perlengkapan: Penandaan CE, penghadang cahaya keselamatan, Kami menawarkan mesin pemotong pelat bekas Dener DMP-CNC/120-3020, tahun pembuatan 2012. Tipe: DMP-CNC/120-3020 Kekuatan pembengkokan: 120 ton Panjang pembengkokan: 3020 mm Berat: 8000 kg Tahun pembuatan: 2012 Mesin ini diproduksi pada tahun 2012 dan kami membelinya sebagai mesin baru. Sejak pembelian, mesin ini telah beroperasi di satu perusahaan di bawah pengawasan operator tetap. Kondisi teknis dan visualnya saya nilai sangat baik – mesin ini terus digunakan, terawat, bersih, dan berfungsi dengan baik. Parameter dan perlengkapan utama: • Model: Dener Puma 3100 x 120 CNC • Kekuatan penekanan: 120 ton • Panjang pembengkokan: 3100 mm Dodozuxpdepfx Anzskt • Kontrol: Pengontrol CNC ESA S 500 yang intuitif dengan grafis 2D (mudah diprogram, menu dalam bahasa Polandia). • Jumlah sumbu yang dikendalikan oleh CNC: 4 sumbu (Y1, Y2, X, R). • Penahan belakang: Otomatis, bergerak maju-mundur (sumbu X) dan atas-bawah (sumbu R), dikendalikan langsung dari panel CNC. • Kompensasi defleksi meja manual • Pemasangan alat: Sistem penjepit cepat tipe Amada/Promecam (Euro) dengan tuas – secara signifikan mempersingkat waktu penggantian alat. • Keamanan: Perlindungan samping penuh dan tirai optik (penghalang keselamatan) dengan sertifikat CE. Kondisi teknis: • Lemari listrik dan sistem hidraulik dalam kondisi asli, tanpa modifikasi atau kebocoran yang tidak sesuai standar pabrik. • Mesin dirawat secara berkala, digunakan untuk mengerjakan komponen ringan dan sedang.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, GÜNTHER GTP 600 MC2 | Mesin pemotong dan pemampat daging rol (tenderizer pita) Produsen: Günther Maschinenbau GmbH Model/Tipe: GTP 600 MC2 Nomor Seri: 34477 Tahun Pembuatan: 2015 Catu Daya: 400 V / 50 Hz / 16 A Daya: 4,5 kW Dimensi Keseluruhan: 2250 x 2050 x 2050 mm Lebar Kerja: 570 mm Lebar Pita: 595 mm (plastik) Parameter Pneumatik: tekanan kerja 6 bar, konsumsi udara 100 l/menit Dkedpfx Anjzu Axcszjt GÜNTHER GTP 600 MC2 adalah perangkat industri canggih yang menggabungkan fungsi mesin pemotong daging rol (tenderizer) dan mesin pemampat daging pneumatik dalam satu proses. Mesin ini dirancang untuk fasilitas pengolahan daging profesional, toko daging, dan lini produksi produk daging olahan yang dimasak dan difermentasi. Kombinasi pemotongan permukaan dengan tekanan mekanis memungkinkan peningkatan signifikan pada luas permukaan aktif untuk penyerapan larutan garam, meningkatkan pelepasan protein, dan memastikan pengikatan dan kohesi produk yang sangat baik setelah diproses secara termal. Perangkat ini dirancang untuk diintegrasikan ke dalam jalur proses, termasuk langsung di belakang mesin injeksi larutan garam otomatis. Rol pemotong dan rol pemampat yang dikendalikan secara pneumatik secara otomatis menyesuaikan jaraknya dengan ketebalan potongan daging yang dimasukkan (potongan daging babi, sapi, atau unggas). Hal ini menjamin proses pemrosesan yang konsisten tanpa merusak struktur serat, yang menghasilkan efisiensi pengirisan yang lebih tinggi dan tampilan potongan produk akhir yang lebih menarik.

Kondisi: siap digunakan (bekas), Kekuatan pemadatan: sekitar 700 kN (sekitar 70 ton) Daya mesin: sekitar 11 kW Catu daya: 3 × 400 V / 50 Hz Berat satu bal: hingga sekitar 600 kg Dimensi bal: sekitar 1100 × 1100 × 1200 mm Dimensi mesin: sekitar 5,9 m panjang, 2,5 m lebar, sekitar 2,6 m tinggi Berat mesin: sekitar 7 ton Waktu siklus: sekitar 45–47 detik Fitur desain lubang pemuatan besar untuk karton kemampuan pengisian otomatis (misalnya, dengan konveyor) pengikatan manual dengan kawat (4 kawat) pengunci palet dan pintu hidrolik untuk pengambilan bal Keunggulan mesin ini bal besar berarti lebih sedikit pengangkutan kekuatan pemadatan yang tinggi Dkjdpfxjra Ddds Anzot dirancang untuk pengoperasian berkelanjutan Tersedia model tahun 2017-2020

Kondisi: bekas, Tahun pembuatan: 2007, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 400 t, panjang langkah: 355 mm, kecepatan operasi: 110 mm/dtk, kecepatan mundur: 110 mm/dtk, panjang meja: 4.100 mm, kedalaman tenggorokan: 410 mm, tabel jarak ke piston: 550 mm, panjang total: 5.800 mm, lebar total: 2.500 mm, tinggi total: 3.800 mm, berat keseluruhan: 30.000 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, MESIN PEMBENGKOKAN COLGAR TERSINKRONISASI SERI PIS DENGAN POMPA GANDA BERKAPASITAS VARIABEL: INSTALASI UNTUK PEMBENGKOKAN PLAT PANJANG PEMBENGKOKAN 4100 MM KAPASITAS 400 TON SUMBU: Y1-Y2-X1-R1-Z1-X2-R2-Z2 DENGAN PENGATUR ANTROPOMORFIK Dsdpfx Aszvb Rtenzokt CNC CYBELEC DENGAN LAYAR VIDEO BERWARNA, MODEL MODEVA 10S LEMARI ELEKTRIK BER-AC MEJA PUSAT WILA SISTEM PENANGAN OTOMATIS UNTUK PUKULAN DAN CETAKAN SERI PERALATAN YANG TERSEDIA

Kondisi: bekas, Tahun pembuatan: 1983, Rated pressure: 2500 t Dsdpfx Ajzrpulenzekt Stroke: 600 mm Cycle time: 13 – 18 s Upright gap: 1720 mm Distance table/ram, stroke up, adjustment up: 2600 mm Table size: 1720 x 1800 mm Permissible continuous load: 4000 t Impact force: 5000 t Ram area: 2100 x 1320 mm Ejector in table: 40 t Ejector stroke in table: 250 mm Ejector area in table: 900 x 820 mm Ejector in ram: 6 t Ejector stroke in ram: 40 mm Spindle diameter: 425 mm Drive power: 900.0 kW Weight: 335.0 t Space requirements (LxWxH): 3.4 x 4.6 x 9.7 m Height above ground: 8.3 m Fully automatic forging line / spindle wedge press with automation for the production of flange shafts For hot forming only With reversible squirrel-cage induction motor, pneumatic brake, plate ejector in the table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for advancing, marking, tool change, loading mechanism, tilting device, loading and unloading arm, rotary table, oil circulation lubrication, central grease lubrication Cycle time approx. 13 - 18 s Dismantled and stored – as is, NOT re-commissioned

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, daya: 4 kW (5,44 hp), Kami menawarkan Uniflex HM 325.2i_C.2_FD_MVA hose crimper ini, kondisi sangat baik, dilengkapi pedal kaki, tahun pembuatan 2020. Dodpfsy Apdwex Anzekt Tipe: HM 325.2i_C.2_FD_MVA Nomor seri: 60046 Tegangan: 400 V Arus: 15/8,5 A Daya: 4,0 kW Frekuensi: 50/60 Hz Tahun pembuatan: 02/20 Harga berlaku ex works. Mesin harus diambil sendiri atau melalui ekspedisi. Ketentuan pembayaran: 50% uang muka / 50% saat pengambilan – tidak menerima pembayaran tunai! Hanya melalui transfer bank. Segala bentuk garansi dan penjaminan tidak berlaku! Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dalam kondisi kerja yang sangat baik. Dkedpfoim Si Rsx Anzst Mesin menyala untuk keperluan pemeriksaan.

Kondisi: siap digunakan (bekas), Swisstool P-15, Mesin Press dengan Sistem Dorong Dimensi: Dimensi saat dipasang: 700mm x 500mm x (minimal) 1800mm Dimensi saat diangkut: 1200mm x 800mm x 1930mm Berat: 350 kg Jangkauan: 280mm Dksdpfxozu Ndfs Anzst Langkah: 300mm Penyesuaian Naik/Turun: 220mm Langkah Hidraulik: 150mm Anda dipersilakan untuk datang dan melihat langsung. Kami dengan senang hati akan mengatur pengiriman dengan biaya yang terjangkau! Anda akan menerima faktur yang sah. Untuk pelanggan di luar negeri, faktur bersih juga dapat dibuat. Syaratnya adalah memiliki nomor identifikasi PPN yang masih berlaku. Hak untuk menjual kepada pihak lain tetap berlaku. Kunjungi toko kami dan lihat juga penawaran kami yang lain. Nama perusahaan dan merek dagang yang tercantum adalah milik masing-masing pemiliknya dan hanya digunakan untuk identifikasi dan deskripsi produk. Perbedaan dalam data teknis serta kesalahan dalam deskripsi produk dapat terjadi dan tetap menjadi hak kami.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 8,5 kW (11,56 hp), tegangan masuk: 400 V, jenis arus masuk: tiga fasa, gaya penekanan: 110 t, panjang total: 3.850 mm, lebar total: 1.650 mm, tinggi total: 2.680 mm, berat keseluruhan: 7.500 kg, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, en Djdpfey D Nvisx Anzekt

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Sudut pembengkokan (maks.): 135 °, panjang total: 1.500 mm, lebar total: 350 mm, tinggi total: 530 mm, masa garansi: 12 bulan, The press brake enables the production of complex profiles and bends. Thanks to its segmented design, demanding sheet metal processing tasks can also be performed. Our model features an improved construction – with the simple and quick removal of the segments, you can bend channels, boxes, or similar shapes. The segments on the upper beam are fastened with hexagon socket screws. Lowering via a hand lever Upper clamping beam with 45° tip angle Easy adjustment of the upper clamping beam; removable segments for box bending Machine equipped with a deflection compensation system (eliminates the so-called “banana effect” when bending thicker sheets) Technical Data Working length: 1220 mm Max. sheet thickness: 1.5 mm Dodpfxeytfabs Anzokt Max. opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENTED PRESS BRAKE FOR SHEET METAL 1220 × 1.5 MTP 165 KG Delivery Conditions Machine is brand new 12 months warranty Warranty service Service available after the warranty period CE declaration of conformity Technical documentation (DTR) in English Delivery to the customer is possible. Transport costs are calculated individually based on the carrier’s offer. If you are interested in other machines, we invite you to visit our website.

Kondisi: bekas, Tahun pembuatan: 2010, nomor mesin/kendaraan: Howard 1900 PLE, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 40 h, tegangan masuk: 400 V, arus masuk: 32 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang total: 5.000 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, berat keseluruhan: 960 kg, Perlengkapan: Penandaan CE, Mesin press selang bekas dari perubahan produksi. Sistem ini digunakan untuk mengepres atau mengeringkan bahan nabati. Kunjungan lokasi dan video fungsi tersedia atas permintaan. • Cocok untuk pedagang dan pengolah di bidang pengolahan buah, jus, sari atau tanaman. • Bak stainless steel termasuk dalam pengiriman. • Dijual karena perubahan fasilitas atau proses. Dedpfx Anszuzfnezskt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Merek: DIXI Tipe: 60 SD Tahun Pembuatan: 2012 Tekanan: 60 ton Voltase: 400 Berat maksimum bal: 340-500 kg Dimensi bal: sekitar 120 x 80 x 80-110 cm Berat mesin: 2400 kg Dimensi mesin: 190 cm lebar x 140 cm dalam x 230 cm tinggi Dimensi lubang pengisian: 115 cm x 80 cm dalam x 55 cm tinggi Dksdpfx Anozuxrxezet DIXI 60 SD memiliki pengoperasian yang sederhana, dilengkapi dengan fungsi start otomatis dan sistem pembuangan bal otomatis. Berkat desainnya yang ringkas dan rendah, mesin ini ideal untuk ruang dengan tinggi terbatas.

Kondisi: bekas, UMP Technika BP 600 A, Mesin Pembuat Briket Spesifikasi: Model: BP 600 A Produsen: UMP Technika, Lithuania Tahun: 2018 Tegangan: 380 V Frekuensi: 50 Hz Arus: 70 A Tekanan hidrolik: maks. 300 bar Dkjdpsztx Tyjfx Anzet Gaya penekanan: 124,5–177 t Kapasitas: 500–600 kg/jam ±50 kg/jam Ukuran briket: 150 × 60 / 70 / 75 mm Berat briket: 0,834 / 0,97 / 1,04 kg Dimensi mesin: 2000 × 2100 × 2000 mm Tinggi saat pengangkutan: 2300 mm Berat: 3500 kg Pencampur/Corong: Volume: 10 m³ Motor listrik: 5,5 kW Kecepatan pengaduk: 18,6 rpm Diameter silinder: 2000 mm Tinggi silinder: 1000 mm Tinggi dengan rangka: 3300 mm Berat: 1100 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pelengkung CTO 80/2500 Dkodpezurxfofx Anzst

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Pressing force: 3200 kN, stroke: 700 mm, table dimensions: 2500 x 1300 mm, weight: 63 t, with documentation. Dkjdpolc N R Dsfx Anzst