Beli Multi Memperbaiki Pemegang bekas (11.391)

Kondisi: bekas, berat kosong: 9.640 kg, berat muatan maksimum: 28.360 kg, berat keseluruhan: 38.000 kg, pendaftaran pertama: 05/2018, panjang ruang muatan: 13.400 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.650 mm, volume ruang muat: 87 m³, suspensi: udara, warna: putih, tipe perpindahan gigi: lain, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, tail lift, unit pendingin,

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/2012, panjang total: 11.300 mm, lebar total: 2.500 mm, tinggi total: 1.500 mm, suspensi: udara, ukuran ban: 385/55R22,5, warna: lain, Tahun pembuatan: 2012, Perlengkapan: ABS,

Kondisi: bekas, en-GB_TD0011 Hjdeu Idw Ispfx Ahnjfh

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Hsdpou Idxfefx Ahnofh Control cabinet dimensions: No. 1: LxWxH: 1000x850x2350 mm No. 2: LxWxH: 1250x650x2230 mm No. 3: LxWxH: 650x600x1700 mm No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations equipped with 15 drilling and milling spindles For example: production of industrial fittings in larger quantities (see photo). Further technical details regarding the machine: - Workpiece carrier: workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holding fixture; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. spindle speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - Left side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - 1st thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 125 mm; spindle speed 35.5 - 900 rpm; reversible (right/left) - 2nd thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 80 mm; spindle speed 45 - 560 rpm; reversible (right/left) Equipment: - 2 hydraulic power units - Chip conveyor system - Band filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Hand-held control unit This machine is not connected. Sale as is! Subject to prior sale.

Kondisi: bekas, en-230624-01 Hedpju Idwbsfx Ahnjfh

Kondisi: bekas, Technical details: Hjdpfx Aou Idycohnsfh Spindle taper: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15-20 sec Speed: drilling 225...1037 rpm Speed: threading 50...316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Machine weight approx.: 9.0 t Space requirement approx.: 3.9x2.4x2.5 m Machine dimensions: L:3.9xW:2.2xH:2.7 m Dimensions L x W x H: + plant 2.7x2.52x2.25 m Transfer machine The machine can be offered fully overhauled. (Photos show original condition)! The machine is designed for metal-cutting machining of workpieces in a single clamping operation. It is especially suitable for turning blanks made of brass with a diameter of 90 mm x approx. 100 mm length. Description: - Workpiece carrier with indexing disc and clamping stations, rotary table type with horizontal axis, featuring 5 workpiece stations. Machining units: - Drilling spindles and tapping units - Drilling capacity up to 2 3/4" and 81.53 mm in brass - Thread cutting up to 2 1/2" and metric threads The machine is equipped with automatic workpiece feeding and unloading units (feeding rate 3-4 pieces/min and cycle time 15-20 sec). Also includes coolant system. i.D.

Kondisi: bekas, Tahun pembuatan: 2003, en Hfjdpfx Aou Icl Rjhnsh

Kondisi: bekas, Tahun pembuatan: 2007, en-GB Hsdpfeu Icmhex Ahnsfh

Kondisi: bekas, Technical specifications: Number of spindles: 9 units Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Hedpsu Idvkefx Ahnjfh TRANSFER MACHINE with 9 drilling and milling spindles - right side: 3 drilling and milling spindles, 9 speeds, gear-driven, fixed, and left side: 3 drilling and milling spindles, 9 speeds, gear-driven, fixed, as well as 3 radial drilling and milling spindles, 9 speeds, gear-driven, fixed internal diameter.

Kondisi: bekas, Technical details: Number of spindles: 9 units Approximate machine weight: 10.2 t TRANSFER AUTOMATIC MACHINE with 9 drilling and milling spindles - On the right: 2x drilling and milling spindles and 1x tapping spindle with 9 speeds - On the left: 2x drilling and milling spindles and 1x tapping spindle with 9 speeds, plus radially 2x flexible drilling and milling spindles and 1x flexible tapping spindle, each with 9 speeds Hodpfx Asu Idwnjhnefh i.D.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions: LxWxH: 2400x2800x2800 mm Control cabinet dimensions No. 1: LxWxH: 1000x850x2350 mm Control cabinet dimensions No. 2: LxWxH: 1250x650x2230 mm Control cabinet dimensions No. 3: LxWxH: 650x600x2300 mm Control cabinet dimensions No. 4: LxWxH: 1300x650x2350 mm Hfedpfxsu Idxrs Ahnjh TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles E.g. for series production of fittings in large quantities Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm - Left: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm, as well as 3x radial drilling and milling spindles, including 1x U-axis and 1x thread-cutting spindle - 1st thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power packs - Chip conveyor - Band filter by Filtertechnik Gera (nonwoven band 430mm) - Operator panel - Hand-held pushbutton controller i.D.

Kondisi: bekas, berat kosong: 5.720 kg, berat muatan maksimum: 42.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 07/2019, suspensi: udara, kondisi ban: 30 persen, kapasitas angkut: 36.280 kg,

Kondisi: baik (bekas), SCM M2 gergaji multi-blade Tipe: M2 Hfjdszcdfuepfx Ahneh Lebar rantai: 220 mm

Kondisi: bekas, Coil width: 1600 mm Outer coil diameter: 1550 mm Space requirement approx.: 2.0 x 0.55 x 1.65 m Hsdpfx Ahecxxn Djnsfh Coil hook, coil turner for lifting, turning, and transporting coils a cost-effective lifting device Lifting device for crane operation Pipe sections, wire, cable bundles, or ring-shaped loads such as coils can be transported easily and safely using coil hooks.

Kondisi: bekas, Tool holder interface type: HSK-A 100 Tool mounting type: Wohlhaupter Tool mounting type: Fine boring heads / Precision turning Hfedsg Nqlijpfx Ahnjh Large selection of Wohlhaupter HSK-A 100 tool holders, boring heads, adapters, and extensions available. Parts list with prices available on request.

Kondisi: bekas, jarak tempuh: 600.000 km, daya: 315 kW (428,28 hp), pendaftaran pertama: 06/2015, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2015, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Tahun pembuatan: 2004, Kondisi: bekas, High-Performance Band Resaw Möhringer / Braun Canali Model: Multi-Line TB 1250 MF-20 Hsdpfx Ahjdfcv Isnjfh Roller Diameter: 1250 mm Roller Width: 150 mm Saw Blade Speed: 28–50 m/s Connected Load: Approx. 45 kW Feed Rollers: 2 x 4 Roller Height: 200 mm Cutting Height up to the Lower Edge of the Pressure Guide: 400 mm and higher Cutting Width: 250 mm to the left of the saw blade and 250 mm to the right of the saw blade with Center Cut Device Complete Technical Documentation Original photos to follow

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de_001 Hfsdpfx Ahoy I Dkcsneh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, 1 used, very good condition, water-cooled multifunctional welding system with MIG/MAG pulse and standard welding, MIG brazing, and stick electrode welding Manufacturer: DALEX, Origin Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multifunction welding system stands out with the following welding technologies: • Easy operation • Multifunctional display • Various selectable welding processes: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduces labor costs by up to 30% Technical data: Welding current range, stepless: 10 - 400 A DB 100% duty cycle: 315 A / 30 V HSB 60% duty cycle: 400 A / 34 V Primary voltage: 3 x 400 V Dimensions (L x W x H): approx. 1030 x 480 x 1300 mm Total weight: approx. 125 kg Accessories / Special features: • Water cooling Hsdpoyrgu Rjfx Ahnjfh • Separate wire feeder DALEX DV-36 L(W) with 4-roll wire drive • Hose package 3 m • Pressure regulator • Ground cable • Chassis • Gas cylinder holder • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji potong melintang multi-blade untuk produksi balok dan semifabrikasi bubut TRV Jumlah gergaji: 11 Hjdjy T H Riepfx Ahnofh Tinggi maksimal elemen: 70 mm Panjang maksimal balok: 820 mm Daya motor utama: 18,5 kW

Kondisi: baru, Tahun pembuatan: 2026, Perlengkapan: Penandaan CE, Maximum cutting height: 160 mm Maximum cutting width: 600 mm Feed rate: 5–30 m/min Saw motor: 37 kW (higher power available) Feed motor: 2.2 kW Hfsdpfju I Dmsx Ahnoh Maximum number of saw blades at 145 mm: 6 Saw spindle diameter: 70 mm Weight: 3,200 kg Special equipment: - Electric height adjustment for feed rollers - Laser with adjustment unit - Powered roller conveyors - Electronic braking system

Kondisi: sangat baik (bekas), NOMOR KATALOG: 8005 SPESIFIKASI TEKNIS - jumlah spindel: 21 buah - jarak antara spindel paling luar: 640 mm - jarak antar spindel: 32 mm - penjepit pneumatik: 2 buah - ukuran meja kerja: 870x560 mm - tinggi hingga permukaan meja: 900 mm - langkah silinder feeder: 65 mm - pengaturan pengeboran: vertikal/horizontal dan miring - pengaturan unit pengebor: pneumatik - motor utama: 1,5 kW - dimensi (panjang/lebar/tinggi): 1000x1150x1240 mm - berat: 370 kg KEUNGGULAN Hfedey T Rmhjpfx Ahnjh – 21 spindel – penggantian mata bor cepat dengan konektor cepat – bisa mengebor secara vertikal, horizontal, dan miring – belum dicat ulang – mesin bor bekas, kondisi sangat baik Harga netto: 7.900 PLN Harga netto: 1.880 EUR (sesuai kurs 4,2 EUR) (Harga dapat berubah akibat fluktuasi nilai tukar)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, daya: 200 kW (271,92 hp), berat keseluruhan: 7.500 kg, Lini multilama MEBOR dengan dua drum, model Mebor VC700, tahun pembuatan 2016. Kondisi kerja sangat baik! Hampir seperti baru. Multilama ini terdiri dari: 1- Konveyor pengumpan otomatis dengan penempatan rol otomatis 2- Ramp pemuatan 3- Meja pengeluaran dengan penyortiran kiri-kanan Hfodpoy Sganefx Ahneh

Kondisi: bekas, Elemen penjepit bingkai (WS15) HOLZ-HER - bekas - PERHATIAN: Harga SET untuk 4 unit! Tutup penjepit tipe O, Penjepitan ke konsol dengan sakelar tuas, Buka/tutup dengan sakelar tuas ----- Data teknis ----- Rentang penjepitan: 40 - 115 mm Hfjdpfx Ahjvtrk Aonsh

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-to-hu_Machineseeker_001 Hodpfx Asy Ula Sshnefh