Beli Oertlinghaus bekas (30)

Kondisi: baru, Ortlinghaus 0-022-519-31-002 Rem cakram pegas tekanan yang dilepas secara hidrolik, SN:85/4877, belum pernah digunakan, 100% berfungsi, pengiriman sesuai foto. Predpfx Aji Ecb Tjb Isd

Kondisi: bekas, mechanically actuated clutch, detachable clutch, power clutch, clutch Pedjik Ac Uepfx Ab Ijrd -Manufacturer: Ortlinghaus, Clutch type 100110405 35-12 -Gear ratio: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 405/212/H213 mm -Total weight: 41 kg

Kondisi: baik (bekas), mechanically actuated clutch, detachable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, clutch without type designation -Ratio: i = 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 310/212/H213 mm -Weight: 32 kg Pjdpfjik Sl Ajx Ab Ijrd

Kondisi: bekas, Tahun pembuatan: 1976, Pressing force 200 t Clear width between uprights 1,550 mm Stroke 30 - 160 mm Stroke rate 30 - 90 strokes/min Shut height (Stroke + slide adjustment, up) 745 mm Side frame opening 800 mm Table area 1,500 x 1,150 mm Pass-through opening in table 450 mm Table height above floor 810 mm Slide area 1,500 x 1,000 mm Drive power 38.0 kW Predpfxsvuubao Ab Iod Machine weight approx. 26.5 t Space requirement approx. 5.1 x 1.6 x 3.7 m Slide adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Features: - Infinitely variable drive - Pneumatic clutch/brake combination (Ortlinghaus) - Hydraulic overload protection in the slide - Pneumatic slide weight compensation - Motorized slide adjustment Can be offered either without commissioning, or alternatively with new Siemens S7-1500 F control.

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Daya tekan: 1250 kN, Jumlah langkah: 55 min-1, Pjdpfjxxa Aaox Ab Isrd Penyesuaian ram: 75 mm, Langkah: 20-120 mm, Daya motor: 11 kW, Tegangan: 380 V, Berat mesin: 8,6 t, Jarak lengan: 340 mm, Area pemasangan ram: 620 x 300 mm, Area pemasangan meja: 650 x 1000 mm, Kopling hidrolik Ortlinghaus dengan rem ganda, Pengoperasian dengan dua tangan, Perbaikan pada ram telah dilakukan secara profesional.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Performance: 1000 x 3.5 mm; light barrier, - electric foot switch - left side gauge 600 mm, two support arms each 600 mm - central lubrication Pjdsxdv Ucspfx Ab Isrd - Ortlinghaus brake-clutch combination - switchable between upstroke or tilting roller table.

Kondisi: baik (bekas), Tahun pembuatan: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table through-hole: 100 mm Prodpfx Aet Tqgleb Isd Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Machine weight approx.: 1,150 kg Space requirement approx.: 0.96 x 1.34 x 1.88 m - Positive-locking Ortlinghaus clutch - Not suitable for manual loading operations - The press has been inspected by us and delivered with a current UVV safety inspection certificate.

Kondisi: bekas, Single-column Eccentric Press KRUPP Type PEKRD 125 h Machine No.: 2861 Year of manufacture: 1977 Pressing force: 125 t Throat depth: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Shut height, max. stroke up: max. 550 mm Strokes per minute: 60 spm Table height above floor: 800 mm Motor power: 10 kW Power supply: 380 Volt, 50 Hz - Hydraulic overload protection in ram - Pneumatic clutch-brake combination ORTLINGHAUS - Ram counterbalance cylinder - Motorized ram adjustment - Table plate with ball rollers Prodpsdzqddofx Ab Iod - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2 no. 3b for manual loading operations Required floor space L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 t Good condition (very little used)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, New ZF clutches (EK, EKR, EB-ER, EK-ER), Stromag (EKE, EDE, EKN, EFL, EMD, ELN), Heid (FOV, FZV, FMV, MMZ, FMOB), and others available from the largest stock in Europe. All clutches and brakes come with a one-year warranty. The most popular brands continuously in stock include: ZF, Heid, Stromag, Ortlinghaus, Binder Magnete, Ema Dessau, Fumo, PSP Pohony, Telcomec, Warner, Monninghoff, Shinko, as well as many other unique products. We offer: clutches and brakes: electromagnetic multi-disc, toothed, mechanical and hydraulic; accessories: clutch cups, plates (steel, sintered), levers, brush holders, installation kits, brushes. We ensure a fast and efficient service, understanding that a rapid response is crucial in emergency situations. Psdpfx Abevq Nllo Isrd Looking for an electromagnetic clutch or brake? Our staff will help you find it, and for items that are no longer in production, we will recommend the best replacement or offer a refurbishment solution.

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force 400 t Upright distance 1,100 mm Stroke 250 mm Stroke rate 25 – 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table area 1,100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ejector force in ram 3 t Ejector stroke in ram 60 / 70 mm Ram area 980 x 800 mm Lateral frame passage 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (W x D x H) 3.5 x 3.3 x 6.0 m Control cabinet weight 1.4 t Control cabinet space requirement (W x D x H) 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with toggle drive featuring steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorised ram adjustment, pneumatic compensating cylinder in the press frame, cam-controlled ejector in the table (30 t / 80 mm), pneumatic ejector in the ram (3 t, 60 mm), motorised central lubrication Can be offered either without commissioning or alternatively with new Siemens S7-1500 F control system. Pjdpfovuuknjx Ab Iord

Tahun pembuatan: 1983, Kondisi: bekas, Pressure: 75 tons Table: 630x620 mm Ram: 500x450 mm Installation height: 370 mm Ram adjustment: 80 mm Lateral frame clearance: 300 mm Prsdpfx Aectl Dteb Ied Adjustable stroke: 08-100 mm Strokes/min: 07-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feed for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with additional brake

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1996, Kapasitas 1000 x 3,5 mm Prodpfexuwa Uox Ab Iod - pedal kaki elektrik - batas samping kiri 600 mm, dua penyangga masing-masing 600 mm - pelumasan terpusat - kombinasi rem-kopling Ortlinghaus - meja rol miring pneumatik atau pengangkat dengan rol plastik - pengamanan area pemberhentian belakang dengan tirai cahaya - buku petunjuk pengoperasian

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 60 t Throat depth: 280 mm Stroke: 10 - 90 mm Ram adjustment: 60 mm Stroke rate: 110 strokes/min Table surface: 740 x 550 mm Clamping plate: 740 x 555 mm Ram surface: 380 x 200 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight approx.: 3.85 t Space requirement approx.: W 1.1 x D 1.6 x H 2.3 m - Fixed table - Clamping plate - Ortlinghaus hydraulic clutch with additional brake - Manual central lubrication The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and fully technically inspected - Shaft removed, crack tested, new seals installed - New paintwork - New control cabinet with touchscreen Prjdpfx Absv Az T So Isd - New breaking plate + cutting ring - Up-to-date press inspection

Kondisi: bekas, Single Column Eccentric Press BERRENBERG Type EPtG 20 - 325 N-0 Machine No.: 15342 Year of manufacture: 1974 Pressing force: 20 tons Throat depth: 320 mm Table size: 550 x 350 mm Pass-through hole in table: 190 x 120 mm Ram area: 305 x 140 mm Intermediate table (L x W x H): 540 x 340 x 55 mm Pass-through hole in intermediate table: Ø 103 mm Clamping shank bore: Ø 40 mm Stroke adjustment: 8 - 70 mm Ram adjustment: 35 mm Installation height max.: 345 mm (without intermediate table) Installation height max.: 290 mm (with intermediate table) Table height above floor: 700 - 750 mm (without intermediate table) Prodpfx Abev Tp D Ho Ijd Stroke rate: 100 to 180 strokes/min Drive power: 1.5 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination, make: ORTLINGHAUS - Electric foot switch and two-hand control - Infinitely variable stroke rate via variator drive - Table height adjustment via leadscrew approx. 150 mm - Manual central lubrication system, make: BEKA Lubrication Technology - Height-adjustable press table via leadscrew - Electrical schematic included Space required (L x W x H): 1600 x 850 x 1950 mm Weight: 1250 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1995, Pressure: 100 t Stroke: 20 - 120 mm Strokes per minute: 40 - 240 /min Upright clearance: 1300 mm Installation height (stroke + ram adjustment at top): 670 mm Side frame opening: 400 mm Table surface: 1200 x 800 mm Table through opening: 900 x 200 mm Table height above floor level: 1150 mm Ram area: 1130 x 650 mm Ram adjustment: 80 mm Material width: 250 mm Prodpfx Abewc U Nlo Isd Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1 - 9999.9 mm Drive power: 22.0 kW Weight: 16.0 t Space requirement (W x D x H): 3.7 x 2.5 x 3.7 m Height above floor: 3.7 m Approved for automatic operation according to CE standard with infinitely variable drive (PIV gearbox), pneumatic clutch/brake combination (Ortlinghaus), electronic press force monitoring (dual-channel), automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized oil circulation lubrication Electronic roller feed, manufacturer: Kaiser, model: KWV 250

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Table size 520 x 400 mm Strokes 160 strokes/min Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Psdeb U Hwnjpfx Ab Ierd Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Kondisi: bekas, Single-Column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of Manufacture: 1984 Pressing Force: 100 tons Throat Depth: 400 mm Prodpfxeu Rwa Ie Ab Ijd Table Size: 920 x 660 mm Ram Surface: 700 x 450 mm Frame Width at Rear: 735 mm Stroke Adjustment: 20 - 160 mm Ram Adjustment: 80 mm Die Height at 160 mm Stroke: max. 355 mm (without bolster plate) Die Height at 20 mm Stroke: max. 425 mm (without bolster plate) Stroke Rate: 60 strokes/min Table Surface (with bolster plate): 920 x 610 mm Bolster Plate Thickness: 90 mm Pass-through Hole in Bolster Plate: Ø 210 / 180 mm Pass-through Hole in Machine Table: Ø 210 / 180 mm Table Height above Floor: 800 mm (without bolster plate) T-slot Width (table and ram): 22 mm Clamping Shank Bore: 50 mm Motor Power: 11 kW Electrical Connection: 400 Volt, 50 Hz - Hydraulic overload protection in the ram - ORTLINGHAUS pneumatic clutch-brake combination - Electrically adjustable ram with counter - Clamping shank bore with clamping piece - Front crankshaft support bearing - Gear train in enclosed oil-bath gearbox - Two pneumatic ram counterbalance cylinders - Automatic central lubrication system by WOERNER - Stroke release via electric foot switch or two-hand control panel - Electrical control cabinet mounted on the machine - Operating manual and wiring diagram - UVV (accident prevention regulations) for hand feeding operations Space requirements (L x W x H): 2200 x 1600 x 3250 mm Weight: 8.3 tons Good condition

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force 150 t Throat depth 520 mm Stroke 30 - 200 mm Stroke rate 15 - 60 /min Distance between table and ram, large stroke top, adjustment top 650 mm Table surface 1600 x 1000 mm Passage opening in the table 1040 x 140 mm Table height above floor 1000 mm Clearance between side frames 1000 mm Ram surface 1400 x 800 mm Ram adjustment 120 mm Drive power 20.0 kW Weight 27.5 t Space requirement (W x D x H) 2.3 x 2.75 x 4.5 m Only approved for use with safety tooling or fixed guarding in accordance with German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch/brake combination (Ortlinghaus make), hydraulic overload protection in the ram, pneumatic ram counterbalance, semi-automatic ram adjustment Pjdpfx Ajvuudbob Isrd Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Single-Column Eccentric Press RICHTER Type PEKRS 80 Year of manufacture: 1970 – Overhauled in 2024 Press force: 80 tons Throat depth: 350 mm Table size: 900 x 650 mm Through-hole in clamping table: Ø 200 mm Ram area: 700 x 500 mm Strokes per minute: 70 spm Stroke adjustment: 6 - 100 mm Ram adjustment: 85 mm Max. shut height: 400 mm Clamping shank bore: Ø 50 mm Table height above floor: 810 mm Motor power: 8 kW Power connection: 400 Volt, 50 Hz - Pneumatic clutch-brake combination by ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with rupture disc in the ram - Centralized grease lubrication with hand pump Space requirements L x W x H: 1800 x 1250 x 2830 mm Weight: 5.7 tons Very good condition Technically overhauled and fitted with new electrics to meet the latest UVV (accident prevention regulations) Predsi Db Ibjpfx Ab Ied Control system conversion in 05/2024 – suitable for hand-loading operations – according to DGUV Information 209-030 Press Inspection as well as Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools – Presses – Part 1: General safety requirements EN ISO 16092-2: Machine tools – Safety of presses – Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for fast troubleshooting - New electrical cabinet mounted on the side of the machine - Completely based on SIEMENS with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and anti-tie-down function - Electric foot switch - Cam controller with runtime monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure scale - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand control 3 = Single stroke, foot control 4 = Continuous run, foot control 5 = Automatic continuous run 6 = Reverse run

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 250 t Distance between uprights: 1650 / 1400 mm Fixed stroke: 150 mm Stroke rate: 30 - 75 strokes/min Shut height (stroke + ram adjustment at top): 665 mm Side upright opening: 550 mm Table surface: 1600 x 900 mm Passage opening in table: 1000 x 300 mm Table height above floor: 980 mm Ram surface: 1400 x 900 mm Drive power: 42.0 kW Machine weight: approx. 33.00 t Space requirement: approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic ram weight compensation, FIXED stroke, motorized ram adjustment, motorized central lubrication Electronic roller feeder (Normatic, AESL 500-2.8) with motor (Indramat), motorized lateral band guide, motorized height adjustment Tool change system Prsdpovuucwjfx Ab Ijd Distance table - ram without tool change system approx. 765 mm Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1995, Pressing force: 250 t Throat depth: 450 mm Stroke: 8 - 135 mm Strokes per minute: 50 /min Distance table/ram, large stroke top, adjustment top: 635 mm Table surface: 1250 x 850 mm Podsvuk Hxepfx Ab Iord Pass-through opening in table: 355 mm Table height above floor: 950 mm Clear width between uprights: 660 mm Ram area: 790 x 610 mm Ram adjustment: 130 mm Drive power: 18.5 kW Weight: 14.0 t Space requirements (W x D x H): 1.5 x 2.8 x 3.65 m Approved for manual loading operations in accordance with CE standards Equipped with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, pneumatic ram weight compensation, fixed bolster table, motorized central lubrication, two-hand control The machine can be inspected in running condition at our warehouse.

Kondisi: bekas, Tahun pembuatan: 1988, Pressure 200 t Stroke 30 - 160 mm Stroke rate 40 - 120 /min Upright gap 1500 / 1300 mm Installation height (stroke + ram adjustment at top) 860 mm Lateral column passage 600 x 530 mm Table area 1250 x 1250 mm Podjvut S Djpfx Ab Ierd Through-opening in table 550 x 300 mm Table height above floor 1000 mm Ram area 1250 x 1000 mm Ram adjustment 125 mm Material width 30 - 500 mm Material thickness 0.5 - 3.0 mm Feed length 0 - 999.9 mm Drive power 50.0 kW Weight 34.00 t Space requirements approx. 4.0 x 1.7 x 5.2 m (LxWxH) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment.

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 63 t Stroke: 10 - 80 mm Strokes per minute: 75 - 400 Upright spacing: 1080 / 920 mm Shut height (stroke + ram adjustment at top): 450 mm Lateral upright passage: 300 mm Table area: 1000 x 550 mm Die opening in table: 700 x 160 mm Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Prjdpsvut Ixofx Ab Ied Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Required space approx. 2.8 x 2.7 x 3.1 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive control (PIV), pneumatic clutch/brake combination (manufacturer: Ortlinghaus), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram weight compensation Servo roll feed Kaiser KWV 250.

Kondisi: bekas, Tahun pembuatan: 2000, Pressure: 8 t Reach: 350 mm Stroke: 9.5 mm Strokes per minute: 180 - 1300 /min Distance table/ram, max. stroke up, adjustment up: 214 mm Table size: 400 x 220 mm Table height above floor: 980 mm Ram area: 190 x 170 mm Ram adjustment: 25 mm Blank diameter: 900 mm Number of grooves: 1 - 999 Material thickness: 2.0 mm Distance between center of indexing spindle and center of ram: 35/65 - 450 mm Ventilation stroke: 42 mm Punching stroke: 3 mm Drive power: 40.0 kW Weight: 6.1 t Space requirement (W x D x H): 2.6 x 1.3 x 2.2 m with infinitely variable three-phase drive, pneumatic clutch and brake combination (Ortlinghaus), manual ram adjustment, pneumatic blank clamping, intermittent switch II, ram lifting device for ventilation stroke, automatic stripper device, circulating oil lubrication, soundproof cabin with movable safety guard, Notchmaster control system with process visualisation via monitor Slide conveyor (manufacturer: Neuhäuser, type 2.090-0, year 1996) Pedpfxsvuupde Ab Ijrd Distance between center of indexing spindle and center of ram approx. 35/65 - 450 mm Ventilation stroke approx. 42 mm Punching stroke approx. 3 mm

Kondisi: bekas, Tahun pembuatan: 1985, Pressure 500 t Column spacing 3100 mm Fixed stroke 300 mm Stroke rate 20 - 70 strokes/min Die height (stroke + slide adjustment at top) 1000 mm Lateral column passage 1400 mm Table surface 2800 x 1600 mm Ram surface 2800 x 1450 mm Drive power 90.0 kW Machine weight approx. 100.00 t Space requirement approx. 5.75 x 3.2 x 7.8 m Ram adjustment 100 mm Prjdpfevut N Aex Ab Isd Height above floor 6.4 mm Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive control, pneumatic clutch (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment as is and as lies, WITHOUT commissioning, dismantled and stored (no control system & main motor included)