Beli Optimum B 33 bekas (110)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, The machine is on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine, direct from the manufacturer. F 120X – The OPTIMUM CNC milling machine with Siemens SINUMERIK 828D control system offers high performance, speed, precision, and long service life. - Heavy-duty construction - High productivity - Linear guides for rapid traverse speeds in all axes - 21-position tool magazine - High reliability - Machine body made from quality Meehanite cast iron - Precision-ground cross table with 3 T-slots - Heavily ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws in all axes - High-torque servo drives directly connected to the ball screws in all 3 axes - Electronic handwheel - Chip conveyor - Cleaning gun - RJ45 connector, USB port, and power connection (230V) - Coolant system with 210-litre coolant tank - Heat exchanger Included options: - PPU 290 touch panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing is possible through Siemens Finance. Liquidity is required. Dimensions and Weights: - Length: approx. 2,315 mm - Width/Depth: approx. 2,194 mm - Height: approx. 2,325 mm Nljdpfsymkbqsx Aivog - Weight: approx. 3,800 kg Drilling/Milling Capacity: - Max. cutter head size: 80 mm Feed/Rapid Traverse Speeds: - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data: - Mains voltage: 400 V - Phases: 3 Ph - Current type: AC - Frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Distance Vertical Spindle - Milling Table: - Min.: 150 mm - Max.: 450 mm T-slot Size: 14 mm T-slot Quantity: 3 T-slot Spacing: 125 mm Maximum Load Capacity: 250 kg Accuracy: - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System: - Coolant pumps - Pump drive power (each): 370 W - Tank capacity: 120 l CNC Control: - Model: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look Ahead: 150 - Number of tools: 512 Travel Paths: - X-axis automatic: 500 mm - Y-axis automatic: 400 mm - Z-axis automatic: 300 mm Vertical Spindle: - Spindle taper: BT 30 - Speed range: 10–16,000 rpm - Spindle drive motor power (continuous S1): 12 kW - Spindle drive motor power (S6-30%): 22.8 kW - Spindle motor torque (continuous S1): 38 Nm - Spindle motor torque (30% operation S6): 116 Nm Feed Motor Torque: - X-axis continuous operation S1: 6 Nm - Y-axis continuous operation S1: 6 Nm - Z-axis continuous operation S1: 11 Nm Servo Tool Changer - Type: Carousel in front of the spindle - Number of tool positions: 21 tools

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), CNC-FBDM-Optimum-280-700 Nlsdpfx Aeyyplisivjg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, The machine is located in the showroom. Optimill F 310 HSC Premium CNC milling machine – directly from the manufacturer. F 310 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Rigid, torsion-resistant machine base with reinforced ribs • Profile rail guides with roller recirculation on all axes for high load capacities • High-torque servo drives, directly connected to the ball screw spindles in all three axes • High-performance, preloaded, precision-ground ball screw spindles for rapid traverse speeds in all axes • Telescopic way covers on all three axes • SK40 main spindle with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic handwheel with enabling switch and emergency stop for easier program set-up • Tool changer with double gripper arm, 30 tool positions • Coolant system with chip flushing and cleaning gun • Through-spindle cooling, 20 bar • Belt-type chip conveyor for efficient chip evacuation • Chip trolley • Oil separator • Work area lighting • Additional SIEMENS package: material defect liability and free online/on-site OSS Plus service • 1-year basic maintenance contract included in Germany/Austria/Switzerland Control system • 15.6" color display • 16:9 format Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Live drawing Equipment details • Inline spindle • SK40 / DIN 69871 taper • Spindle speed: 12,000 rpm Dimensions and weights • Length: approx. 4,319 mm • Width/depth: approx. 2,300 mm • Height: approx. 3,000 mm • Weight: approx. 7,000 kg Rapid traverse speed • X-Axis: 30 m/min • Y-Axis: 30 m/min • Z-Axis: 30 m/min Electrical data • Supply voltage: 400 V • Mains frequency: 50 Hz • Power connection • Total connected load: 56 kVA Horizontal milling table • Length: 1,200 mm • Width: 600 mm • T-slot size: 16 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Maximum load capacity: 800 kg Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm Travel range • X-axis (automatic): 1,050 mm • Y-axis (automatic): 600 mm • Z-axis (automatic): 600 mm Nedsynf Unjpfx Aivjlg Vertical spindle • Spindle taper: SK40 DIN 69871 • Speed range: 12,000 rpm • Drive motor output S1 continuous: 20 kW • Drive motor output S6-30% duty: 50.3 kW • Drive motor torque S1 continuous: 96 Nm • Drive motor torque S6-30% duty: 240 Nm Feed force • X-axis: 6.68 kN • Y-axis: 6.68 kN • Z-axis: 10 kN Feed motor torque • X-axis S1 continuous: 18 Nm • Y-axis S1 continuous: 18 Nm • Z-axis S1 continuous: 27 Nm Tool changer • Double arm gripper • Number of tool stations: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool change time, tool to tool: 2.5 s

Kondisi: baru, Max. turning diameter: 560 mm Max. turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Center height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed speeds: 35 / 0.059 – 1.646 m/min Cross feed speeds: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight approx.: 2,560 kg Space requirement approx.: 3,450 x 1,150 x 1,650 mm Item no. 3462170 This is a heavy-duty machine, distinguished by high flexibility, precision, and efficiency. Equipped with digital position display DPA 31 Plus and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guideways are adjustable via tapered gibs - Right/left-hand rotation at bed carriage selectable via control spindle - Dual-channel safety electronics - Central lubrication on bed carriage - Top slide adjustable range ±90° - Main spindle runs in oil bath Nedpsucgr Isfx Aivelg - Shafts and gears operating in oil bath - Gears are smooth-running, hardened, ground, and supported with 2 adjustable precision taper roller bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125, X and Z axes - Gears and shafts hardened and ground, running in precision oil bath bearings - Clearly arranged selection levers for feed speed selection - Enclosed quick-shift feed gearbox design - Emergency stop toggle switch, motor protection switch, lockable main switch - Emergency stop device with foot control - Tailstock offset ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose management - Heavily ribbed prismatic bed, inductively hardened and precision ground from cast iron - Coolant system with separate coolant tank, level indicator, and oil separator; easy and complete draining and cleaning as per DIN - Thread dial gauge scale adjustable Scope of delivery: - Fixed steady rest, max. capacity Ø 165 mm - Follow rest, max. capacity Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø 113 mm / MT 5 - Fixed center MT 5 - Fixed and revolving center MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial gauge - Initial fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, self-centering Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Kondisi: bekas, Tahun pembuatan: 2024, Optimum Optisaw SD500AV - Vario Bandsaw with Siemens Inverter Used bandsaw, exhibits signs of wear Heavy-duty industrial design Low-noise operation Nodpfx Asx Dzv Ejivjlg Manual or semi-automatic operation Infinitely variable saw blade speed from 20–80 m/min High cutting precision thanks to vibration-free operation Mitre adjustment -45° to +60° by swivelling the entire saw frame Supplied as standard with a high-quality bi-metal saw blade Microswitch for automatic end-stop Coolant pump Ball-bearing saw blade guides with carbide plates for optimal cutting results Easy adjustment of lowering speed via feed control valve on the operator panel Large, hydraulic quick-action vice, self-closing, laterally adjustable Manometer for correct blade tension Clear operator panel Functionality of Semi-Automatic Operation Closing the vice and activating the motor Lowering the saw frame for cutting Stopping the motor and returning the saw frame to the home position Dimensions and Weights Length approx. 2129 mm Width/Depth approx. 1046 mm Height approx. 1687 mm Weight approx. 645 kg Electrical Data Output power (motor rating): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Total connected load: 3.8 kW Supply voltage: 400 V Frequency: 50 Hz Machine Data Saw blade speed(s): 20–80 m/min Saw blade length: 3770 mm Saw blade width: 34 mm Saw blade thickness: 1.1 mm Cutting angle range: -45° to +60° Manual operation: Hydraulically via pushbuttons Semi-automatic operation: Automatic Real-time continuous data generation: Yes Data storage location: On the device Data access: Via wireless interfaces Cutting Capacities 0° round (solid material): 355 mm 0° square (solid material): 300 mm 0° rectangular vertical (solid material): 300 x 490 mm -45° round (solid material): 290 mm -45° square (solid material): 250 mm -45° rectangular vertical (solid material): 250 x 250 mm +45° round (solid material): 350 mm +45° square (solid material): 290 mm +45° rectangular vertical (solid material): 290 x 340 mm +60° round (solid material): 230 mm +60° square (solid material): 180 mm +60° rectangular vertical (solid material): 180 x 220 mm Note on Cutting Area: Cutting range determined using the saw frame’s weight with aluminium. May vary with different materials and can be smaller in some cases (not the maximum cutting capacity).

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The machine is currently on display. Optiturn L34 HS CNC lathe available directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe equipped with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Ribbed machine bed made from cast iron - High-quality spindle bearings - Emergency stop impact switch - Central lubrication system - Siemens spindle and feed motors - Maintenance-friendly safety enclosure - Rear access panel for servicing - Safety switch on the front sliding door - Tool turret positioned behind the turning center (left-hand turning tools) - Linear guideways - “SINUMERIK 808D on PC” software package included (practical training software allowing workpieces to be programmed and simulated offline on PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Torque of drive motor (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine specifications - Center height: 165 mm - Center distance: 600 mm - Swing diameter over cross slide: Ø 146 mm - Swing diameter over bed: Ø 350 mm Spindle speed range - Spindle speeds*: 30 - 3500 rpm Tool turret - Type: electric - Number of tool stations: 6 tools - Maximum tool shank size: 16 mm (square) - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel distances - X-axis: 145 mm - Z-axis: 465 mm Feed rates - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available via Siemens Finance. Sufficient liquidity required. Njdpszi Evgefx Aivjlg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Produsen: Optimum Maschinen Germany GmbH Model: L34HS Nomor seri (SN): 11261804002 Tipe mesin: CNC lathe bed datar Tahun produksi: 2018 Daya motor: 3,7 kW Catu daya: 400 V / 50 Hz Rentang putaran spindle: ± 30 – 3500 rpm Kecepatan spindle maksimum: 3500 rpm Diameter pembubutan maksimal: ± 350 mm Diameter pembubutan di atas eretan: ± 146 mm Jarak antara senter: ± 600 mm Perjalanan sumbu X/Y/Z: ± 185 / 185 / 540 mm Nedpsy Ia Uqofx Aivolg Taper / mounting: MK 3 Berat: ± 1200 kg

Kondisi: baru, Mesin Bubut Presisi dengan Lead dan Feed Spindle Merek: OPTiturn Model: TM 3310 D No. Art.: 3403025 Kondisi: Mesin baru Tinggi senter: 165 mm Jarak antar senter: 1.000 mm Kecepatan spindle: 65 - 2.000 rpm (9 tingkat) Nodpfxoh I N Sbs Aivelg Dilengkapi secara standar dengan: - Digital readout 3 axis DPA 31 PLUS - Chuck 3 rahang 160 mm - Motor utama dengan rem listrik - Dudukan mesin dengan penampung serbuk - Dudukan pahat empat sisi - Lampu mesin LED - Sleeve reduksi MK 5/MK 3 - Center tetap MK 3 - Pelindung chuck, pengaman listrik - Set roda gigi pengganti - Sudah diisi oli - Alat servis - Manual pengguna

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F 110 E CNC milling machine – direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control stands out for its performance, speed, precision, and long service life. · Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Linear guides with ball screw drive for high rapid traverse speeds on all axes · Powerful servo drives with high torque on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication system · Spindle oil cooler · Robust, precision-ground milling table with three large T-slots · Portable electronic handwheel with enabling switch and emergency stop button significantly simplifies program setup · Coolant system with chip flushing and cleaning gun · Chip conveyor in auger design · Chip cart · RJ45 socket and 230 V power connection · Enclosed switch cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dust · Work area lamp with over 500 Lux illumination RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function – enables easy optimization for increased dynamic and accuracy requirements Absolute encoders, no reference run required Higher precision Travels: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights: Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Nodpjymkbdjfx Aivolg Drilling/milling performance: Max. cutter head size: 90 mm Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance vertical spindle – table min.: 100 mm Distance vertical spindle – table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Max. table load: 400 kg Precision: Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. - Carousel tool changer with 16 tool stations - All linear guides have stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed-loop control) - Belt-type chip conveyor for efficient chip removal - Chip bin - Max. spindle speed: 10,000 rpm - Integrated machine lamp in the work area - Portable electronic handwheel with enabling button and emergency stop switch. Significantly simplifies program setup - Coolant system with 190-liter coolant tank - Tool change occurs automatically or at the push of a button - Robust, precise milling table, large dimensions, accurately surface-finished - Very spacious access doors to minimize cleaning and maintenance time - „SINUMERIK 808D on PC“ software package included (practical training software for offline workpiece programming and simulation on PC; available for free download) SINUMERIK 808 ADVANCED – CNC technology from the market leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC controller. This compact and user-friendly entry-level system is ideal for simple milling applications. Features like easy operation, commissioning, and maintenance provide the perfect basis for equipping CNC machines. Thanks to its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling applications. With expanded hardware and software, it delivers sufficient performance for basic mold and toolmaking tasks. Compact and robust Thanks to a panel-based CNC design with few interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is ideally suited for tough environments. The compact design enables use in space-saving machines. INCLUDED: - RJ45 Ethernet port - 8.4'' color LCD with 800 x 600 resolution - Ready for remote maintenance Nodsymdygjpfx Aivslg - AST function for simple optimization of dynamic and accuracy demands - Absolute encoders / no reference run required - Improved accuracy Travel distances: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and weight: Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling-milling capacity: Max. cutter head size: 80 mm Max. shank cutter size: 38 mm Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 15 kW Horizontal milling table: Length: 900 mm Width: 500 mm Distance vertical spindle – milling table min.: 100 mm Distance vertical spindle – milling table max.: 600 mm T-slot size: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Max. table load: 350 kg Accuracy: Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear roller guideways on all axes for high load capacities • High-torque servo drives, directly coupled to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse rates on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm with inline spindle • Massive, precise milling table with five T-slots, large dimensions and precision ground • Portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Tool changer with double arm gripper and 30 tool positions • Coolant system with chip flushing system and cleaning gun • 20 bar spindle through-coolant • Belt-type chip conveyor ensures efficient chip removal • Chip cart • Oil separator • Machine light in the working area • SIEMENS supplementary package: warranty for material defects and free online/on-site service OSS Plus • 1 year Basic maintenance contract included in DE/AT/CH • Control • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Manage network drive • 3-D simulation • Drawing function • Siemens OSS PLUS supplementary package • 12 months; Article No. 3589020 • 24 months; Article No. 3589021 • 36 months; Article No. 3589022 Equipment Details: • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm Dimensions and Weights: • Length approx. 2856 mm • Width/Depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid Traverse Speeds: • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min Electrical Data: • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA Milling Table (Horizontal): • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy: • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel: • X-axis (auto) 1000 mm • Y-axis (auto) 620 mm • Z-axis (auto) 630 mm Vertical Spindle: • Spindle mount SK 40 DIN 69871 • Speed range 15000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous 96 Nm • Drive motor torque S6 30% 250 Nm Feed Force: Nlodpjymd Epefx Aivog • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN Feed Motor Torque: • X-axis S1 continuous 20 Nm • Y-axis S1 continuous 20 Nm • Z-axis S1 continuous 36 Nm Tool Changer: • Double arm gripper • Number of tool stations 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool change time (tool to tool) 2.5 s

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F200 ECO Premium CNC Milling Machine directly from the manufacturer. F200 ECO - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Nledpsymd Nbefx Aiveg Drive motor S1 operation: 9 kW Torque drive motor S1 operation: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Torque drive motor S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery volume: 35 l/min Tank capacity: 116 liters Cleaning pump Precision in Milling Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid traverse X-, Y-, Z-axis: 48 / 48 / 48 m/min Motor torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z-axis: 5.34 kN / 5.34 kN / 6.68 kN Speed Range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling Table Distance spindle to table: 100 - 650 mm Table length x width: 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. load capacity: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Equipment Linear guides with ball screws for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Handheld electronic pulse generator with enabling button and emergency stop RJ45 connection and 230V power outlet Machine light in the work area Cleaning gun Ball screws and linear guides by THK Chip flush Spindle head cooling (machining area) Electrical cabinet Arm-tool changer SW24 CE marked *Additional options available

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl-001 Nedpfxsxx Udlj Aivolg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. F110 ECO – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control is distinguished by performance, speed, precision, and long service life. Model F110 ECO Control system SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery volume: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Nedpfx Aieymkbksvelg Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X-, Y-, Z-axis: 48 / 48 / 32 m/min Motor torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Spindle speed*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle to table distance: 100 – 600 mm Table size (L x W): 800 x 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum load capacity: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Overall weight: 4,300 kg Equipment Linear guides with ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enable switch and emergency stop RJ45 port and 230 V mains socket Machine light in working area Blow gun Ball screws and linear guides by THK Chip flushing system Cooling at spindle head (machining area) Electrical cabinet Arm-type tool changer SW24 CE *Additional options available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 1.600 rpm, jarak pergerakan sumbu X: 368 mm, jarak gerak sumbu Z: 2.900 mm, tinggi total: 1.925 mm, lebar total: 1.525 mm, berat keseluruhan: 3.820 kg, panjang produk (maks.): 5.278 mm, jumlah sumbu: 2, Horizontal lathe from 2022. This Optimum OptiTurn TH 8030D features a maximum turning diameter of 800 mm and a turning length of 250 mm. The machine is equipped with a robust spindle chuck and offers a rapid traverse speed of 3800 mm/min. If you are looking for a high-quality lathe, consider the Optimum OptiTurn TH 8030D that we have available for sale. Please contact us for further information about this machine. • Type and Highlights • Lead and feed screw lathe: high flexibility, precision, and cost-effectiveness • Prepared for digital position display (see optional equipment) and quick-change tool post (see optional equipment) • Shipping Information • Packaging dimensions: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical Data • Load capacity: 1.4 t/m • Work Areas: • Max. height 400 mm • Swing over bed 800 mm • Swing over cross slide 570 mm • Bed width 400 mm • Max. width 3050 mm • Swing over gap 1035 mm • Turning length in gap 250 mm • Spindle speeds: • Number of speeds 16 • Rapid traverse speed: • Rapid traverse speed 3800 mm/min • Rapid traverse limited to max. 5 min (30 min. pause) • Electrical Data: • Main drive motor power 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rating 12 kW • Coolant System: • Coolant pump power 150 W • Spindle: • Spindle mount Camlock DIN ISO 702-2 No. 8 • Spindle bore/bar capacity diameter 105 mm • Spindle taper Ø113 (taper 1:20) mm Nedpfx Ajyxncdoivjlg • Tool post: max. clamping height 32 mm • Tailstock: • Tailstock taper MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 mm • Thread cutting: • Metric pitches mm/rev (54 pitches) • Inch pitches 80 - 7/16 TPI (60 pitches) • Diametral pitch 7/8 - 160 (42 pitches) • Modular pitch 0.25 - 60 mm/rev (46 pitches) • Travel: • Compound slide travel 230 mm • Saddle travel 2900 mm • Cross slide travel 368 mm • Feed: • Longitudinal feed range 0.044 - 1.48 mm/rev (25 feeds) • Transverse feed range 0.022 - 0.74 mm/rev (25 feeds) • Design Features and Safety • Hardened and ground Z-axis guideways • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precision-manufactured carriage; all guideways adjustable via gib strips • Compound slide adjustable ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Shafts, gears, and main spindle run in oil bath • Gears smooth, hardened, ground, with 2 adjustable precision taper roller bearings • Clearly arranged lever for selecting feed rates • Enclosed rapid traverse gearbox • Gears and shafts hardened, ground, running in oil bath on precision bearings • Handwheels decoupled and tested to EN 23125 • Dual-channel right/left switch, tested to EN 23125 • Switches with lifecycle monitoring, tested to EN ISO 13849 • Right/left traverse on carriage via selection spindle • Centralized lubrication on carriage • Coolant system with separate coolant tank, level indicator, and oil separator—easy and complete drainage and cleaning in accordance with DIN standards • Leadscrew • Emergency stop, motor protection switch, lockable main switch

Kondisi: baru, Tahun pembuatan: 2026, Mesin Bubut Ulir dan Tarik Presisi Merek: OPTIMUM Model: OPTiturn TZ 4 No. Art.: 3432240 Kondisi: Mesin Baru Tinggi senter: 200 mm Jarak antara senter: 800 mm Kecepatan putar: 45 - 1.800 rpm (16 tingkat) Dilengkapi secara standar dengan: - Display digital 3-sumbu DPA 32 - Senter tetap MK 3 - Dudukan pahat cepat ukuran B - Dudukan pahat bubut BD - Sleeve reduksi MK 6 / MK 3 Njdpfx Aiogqw U Rjvolg - Penyangga tetap ø 10 - 130 mm - Penyangga berjalan ø 10 - 100 mm - Sistem pendingin - Wadah serutan, dapat ditarik - Lampu mesin LED - Perangkat alat pengoperasian

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine directly from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Machine in cast iron column construction for high rigidity • Carousel tool changer with eight tool stations • All linear guides covered with stainless steel • Automatic central lubrication • Siemens main spindle motor • Siemens servo drives in all axes (closed control loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling switch and emergency stop pushbutton greatly facilitates program setup • Coolant unit with 70-liter coolant tank • Tool changes performed automatically or at the push of a button (electropneumatic tool clamping system) • Robust, precision milling table - large, precision-ground • Large access doors designed for minimizing cleaning and maintenance time • LED machine light for complete illumination of the working area • SIEMENS supplementary package for material defect warranty and free on-site service OSS SINUMERIK 808D • Identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no reference run required • Improved accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS supplementary package • 12 months; article no. 3589010 • 36 months; article no. 3589012 Dimensions & Weights Length approx. 2030 mm Width/Depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Nsdpfxoymkdxj Aivslg Electrical Data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Milling Table Horizontal Length 690 mm Width 225 mm Vertical spindle-table clearance min. 90 mm Vertical spindle-table clearance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Max. load capacity 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic Connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical Spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power – continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque – continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed Rate X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed Motor Torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool Changer Type: Carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool change time (tool-to-tool): 7 s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 430 mm, jarak gerak sumbu Z: 460 mm, kecepatan spindel (maks.): 10.000 rpm, model controller: Siemens Sinumerik 828D CNC, PERHATIAN - Pembaruan Perlengkapan: Sebagai pengganti probe ukur RENISHAW, perangkat presetting alat Renishaw sudah termasuk! DETAIL TEKNIS Perjalanan sumbu X: 760 mm Perjalanan sumbu Y: 430 mm Perjalanan sumbu Z: 460 mm Taper spindle: SK40 Kecepatan spindle: 10.000 rpm Kecepatan feeding: 10.000 mm/menit Ukuran meja X: 900 mm Ukuran meja Y: 410 mm Berat benda kerja maksimal: 350 kg Jumlah sumbu: 3 DETAIL MESIN Kontrol: Siemens Sinumerik 828D CNC Pengganti alat: 24 posisi Daya penggerak: 12 kW Pendinginan alat melalui spindle: 30 bar Nljdpfx Aszap Dwsivjg PERLENGKAPAN Perangkat presetting alat Renishaw Konveyor serbuk

Kondisi: baru, Mesin Bor & Milling OPTIMUM OPTImill MB 4 - Mesin Pameran - Penawaran ini merupakan paket perlengkapan. Barang dan opsi berikut sudah termasuk dalam harga: - Mesin bor & milling OPTImill MB 4 Optimum Nlsdpfx Aou R Tftjivog - Dudukan mesin MSM 3 Optimum - Set collet chuck MK 4/ER 32 – M16 Optimum - Set end mill HSS IMUM - Ragum presisi FMS 100 Optimum - mesin pameran baru -

Kondisi: baru, Mesin Bubut Presisi Poros Utama & Pengarah Ulir Merek: OPTIMUM Model: OPTiturn TZ 4V No. Artikel: 3432245 Nlsdpfsg Hkmrsx Aivog Kondisi: Mesin baru Tinggi senter: 200 mm Jarak senter: 800 mm Kecepatan putar: 50 - 3.000 rpm Pengaturan tanpa tingkat melalui 2 tingkat gigi dengan penggerak variabel inverter SIEMENS Dilengkapi standar dengan: - Indikator digital 3-sumbu DPA 32 - Indikator kecepatan digital di kepala spindel - Senter pusat tetap MK 3 - Dudukan pahat quick-change ukuran B - Dudukan pahat bubut BD - Bushing reduksi MK 6 / MK 3 - Penyangga tetap ø 10 - 130 mm - Penyangga berjalan ø 10 - 100 mm - Perangkat pendingin - Wadah serutan dapat ditarik - Lampu mesin LED - Peralatan pengoperasian

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0518100425, tinggi pusat: 260 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 2.000 rpm, lebar tempat tidur: 220 mm, jenis kontrol: manual, RINCIAN TEKNIS Tinggi puncak: 260 mm Diameter putar di atas alas: 460 mm Jarak antar puncak: 2.000 mm Lebar alas: 220 mm Lubang spindle: 82 mm Rentang kecepatan spindle: 25 - 2.000 rpm RINCIAN MESIN Nljdjy Hicujpfx Aivog Kontrol: Konvensional Dimensi & Berat Dimensi (P x L x T): 3.350 x 1.000 x 1.530 mm Berat kosong: 3.000 kg Paket transportasi: 1 unit PERLENGKAPAN Pemegang alat ganti cepat Chuck tiga rahang Tampilan digital: SINO SDS6-3V

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC Milling Machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out due to its performance, speed, precision, and long service life. - All linear guides with stainless steel covers - Automatic central lubrication - SIEMENS servo drive on all axes (open-loop) - Max. spindle speed: 4000 rpm - Machine light in the working area - Portable electronic handwheel with approval button and emergency stop switch. Greatly facilitates program setup - Tool change at the press of a button - Large access doors designed to minimize cleaning and maintenance time - Software package "SINUMERIK 808D on PC" included (practical training software for offline programming and simulation of workpieces on a PC; software can be downloaded free of charge) SINUMERIK 808 ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept. The SINUMERIK 808D ADVANCED controller is a panel-based CNC control. This compact and user-friendly entry-level solution is used for simple milling applications. Features such as easy operation, commissioning, and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and an operator panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. Its small dimensions make it suitable for compact machines. INCLUDES: - RJ45 Ethernet port - 8.4” color LCD display with 800 x 600 resolution - Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling and milling performance Maximum face mill diameter: 50 mm Maximum end mill diameter: 25 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection: Total connected load: 5 kVA Horizontal milling table Length: 620 mm Width: 180 mm Vertical spindle to table min.: 50 mm Vertical spindle to table max.: 295 mm T-slot size: 12 mm Number of T-slots: 3 T-slot spacing: 50 mm Maximum load: 30 kg Nsdpoymkkfjfx Aivolg Accuracy Repeatability: ±0.02 mm Positioning accuracy: ±0.01 mm Coolant system Coolant pump drive power: 95 W Tank volume: 30 l Travel paths X-axis (automatic): 355 mm Y-axis (automatic): 190 mm Z-axis (automatic): 245 mm Vertical spindle Spindle taper: BT 30 Speed range: 4000 rpm Note regarding speed range: Please note the maximum spindle speed must be reduced by approx. 20% during continuous operation. Continuous duty (S1) drive motor power: 1.5 kW S6-30% duty (intermittent): 2.2 kW Continuous duty (S1) drive motor torque: 9.5 Nm 30% duty (S6) drive motor torque: 14 Nm Feed speed X-axis: 10,000 mm/min Y-axis: 10,000 mm/min Z-axis: 10,000 mm/min Feed motor torque X-axis (S1): 1.9 Nm Y-axis (S1): 3.5 Nm Z-axis (S1): 3.5 Nm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F 80 CNC milling machine – direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out for its performance, speed, precision, and long service life. • Column-type design in cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program run-in considerably • Coolant system with 70-liter coolant tank • Tool change is automatic or by pushbutton (electropneumatic tool clamping device) Nodpfxeymkcus Aivolg • Solid, precise milling table – generously sized and precisely surface-machined • Access doors are generously dimensioned to minimize cleaning and maintenance times • LED machine light for full illumination of the workspace SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front panel USB (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process-reliable:  LED tool number display  MCP with rotary switch for feed and spindle override Comprehensive package:  RJ45 Ethernet port  Ready for remote maintenance  AST function; allows easy optimization for higher requirements in dynamics and accuracy  Absolute encoder / no referencing required  Increased accuracy • Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Accuracy Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel X-axis automatically 450 mm Y-axis automatically 260 mm Z-axis automatically 450 mm Distance spindle – column max. 370 mm Vertical spindle Spindle interface BT 40 Speed range 50 – 10,000 rpm Speed range note: Please note that the maximum spindle speed must be reduced by approx. 20% in continuous operation Continuous operation drive motor power S1 3.7 kW Drive motor power S6-30 % duty 5.5 kW Drive motor torque S1 continuous 24 Nm Drive motor torque S6 30% duty 36 Nm Feed motor torque X-axis S1 continuous 6 Nm Y-axis S1 continuous 6 Nm Z-axis S1 continuous 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time – chip-to-chip: 7 sec

Kondisi: siap digunakan (bekas), Ditawarkan sebuah mesin bubut CNC merek Optimum. Diameter pembubutan di atas meja/meja geser: 300mm/200mm, jarak antar pusat: 430mm, jarak langkah X/Z: 145mm/465mm, kecepatan cepat X/Z: 10m/menit/12m/menit, diameter batang: 30mm, lubang spindel: 30mm, kecepatan maksimum: 4000 RPM, jumlah posisi alat: 6, sistem kontrol: Siemens SINUMERIK 808D ADVANCED. Dimensi mesin X/Y/Z: sekitar 1655mm/1590mm/1955mm, berat: sekitar 832kg. Pemeriksaan di lokasi dimungkinkan. Nljdpfxsztdtxs Aiveg

Kondisi: bekas, Tahun pembuatan: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 mm/min (x-axis) Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight (approx.): 1.15 t Required space (approx.): 1.5 x 1.45 x 2.2 m Product Information – "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Spindle Speed" The Optimill MF 4 Vario is a multifunctional drilling and milling machine designed for professional applications. It features a continuously variable electronic drive with frequency inverter "Made in Germany" and a digital 3-axis position display DPA 21. Heavy-duty, massive construction made from high-quality Meehanite cast iron. High concentricity accuracy thanks to tapered roller bearings, less than 0.01 mm measured at the quill. Automatic quill feed. Clockwise/counterclockwise rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant system. Y-axis features a flat guideway and a large travel of 400 mm. Motorized table height adjustment (Z-axis) with rapid traverse. Equipment details: Nodpfxst U Rm Io Aivolg - Frequency inverter, quality made in EU - Drilling/milling head - Tiltable ±45° - Overhang 200–680 mm - Stepless speed control, especially wide speed range - Drill depth stop, adjustable with millimeter scale, front readable - Protective screen, height-adjustable, generously sized - Cross table, heavy-duty, generously sized, precision-machined surface - Motorized table height adjustment (Z-axis), adjustable end stops - OPTI control panel with integrated control desk - Integrated digital position display DPA 21 with rpm indicator - X-axis motorized table feed, stepless speed regulation, rapid traverse, right/left-hand rotation Technical Data: Length (product): 1,500 mm Width/Depth (product): 1,450 mm Height (product): 2,200 mm Weight (net): 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Max. cutter head size: 100 mm Max. end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle spindle mount: ISO 40 DIN 2080 Vertical spindle speed range: 8 ranges, electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle–horizontal table min.: 40 mm Distance vertical spindle–horizontal table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. table load: 275 kg Vertical spindle main drive motor: 3 kW Coolant pump drive motor: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity in steel (S235JR): 32 mm Continuous drilling capacity in steel (S235JR): 28 mm Vertical spindle rotation range, milling head Z–X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev