Beli Orkel Mp 2000 bekas (83.281)

Kondisi: baik (bekas), Tahun pembuatan: 2000, panjang total: 3.000 mm, lebar total: 2.000 mm, tinggi pelat: 350 mm, Manufacturer: STOLLE Type: CAST IRON Year of manufacture: 2000 Specifications Metric US Standard Length: 3000 mm Width: 2000 mm Height: 350 mm Number of T-slots: 6 T-slot spacing / pitch: 330 mm T-slot size: 54 mm Weight per plate approx.: 5700 kg Ledpfjwp Hwhsx Aaheta Number of matching pieces: 3 Dimensions (estimated): Length: 3000 mm Width: 2000 mm Height: 350 mm Weight: 4800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute any representation or contractual terms. We recommend that you verify all critical details.

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), Traversing paths X/Y/Z: 1700mm/800mm/800mm; table dimensions X/Y: 2000mm/630mm; tool holder: ISO50; max. table load: 6000kg; feed rate: 5m/min; rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 5200mm/2800mm/2950mm; weight: approx. 12,000kg; control system: Heidenhain TNC-630. Documentation available. On-site inspection possible. Lsdewnr Iijpfx Aahjta

Kondisi: sangat baik (bekas), We offer a Busch vacuum pump set, model WV 2000 C, NC 0300 B. The pumps were rarely used and come from a solar panel manufacturing facility. Lodpfxev U Ru Ae Aahjta

Tahun pembuatan: 2022, Kondisi: sangat baik (bekas), Screw compressor Elmag / Mark MSM 4 D-270 AD 2000 with ES 4000 Basic control unit, year of manufacture 2022, 127 operating hours, 7,489 standby switch-on hours, max. operating pressure 10 bar, effective delivery volume 516 l/min, equipped with refrigerant dryer. Ltedpfx Aaoma Hv Sshoa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, JUN-AIR compressor in soundproof enclosure Model 2000-25M Pressure (PS) 16.0 bar Continuously adjustable Tank volume 25 liters Integrated air dryer Very well maintained Only 204 operating hours in a clean environment. Ljdpfx Aewpupxjaheta Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel castors with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Technical Specifications: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roll diameter: 320 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Ltodpfov Htniex Aahoa Hardened rolls Cone bending device by tilting both side rolls Mobile control panel with digital display Motor power: 11 kW CE marking Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 t The seller is not liable for typographical or data transmission errors. The machine’s condition—both visually and technically, including wear—is consistent with its age; used machines are sold without any warranty.

Kondisi: baik (bekas), panjang total: 4.000 mm, lebar total: 2.000 mm, tinggi pelat: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length: 4000 mm Width: 2000 mm Height: 295 mm Number of T-slots: 4 T-slot spacing (pitch): 400 mm T-slot size: 42 mm Approximate weight per plate: 6000 kg Dimensions (Estimated) Length: 4000 mm Ljdpowp E Ncjfx Aaheta Width: 2000 mm Height: 295 mm Weight: 6200 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or terms of contract. We recommend that you verify all critical details independently.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1992, A dismantled Autefa crosslapper is available. Working width: 3000mm, working speed: 60m/min. An on-site inspection is possible. Ltsdpowwvw Tefx Aahja

Kondisi: sangat baik (bekas), We offer a Busch WV 2000 C, NC 0300 B vacuum pump set. The pumps were only lightly used and come from a solar panel manufacturing plant. We have 2 sets available. Ltedpjv Uw Snjfx Aahea

Kondisi: baru, en-001 Lsdpfx Ajflt Ameahsta

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Pumping station Screw vacuum pump & Roots vacuum pump Ltodpfx Asv I Ak Neahsa Manufacturer: Busch Model: Cobra NC 0630 B + WV 2000 C Condition: As new, factory overhauled Warranty: 6 months

Kondisi: baik (bekas), panjang total: 5.000 mm, lebar total: 2.000 mm, tinggi pelat: 350 mm, Manufacturer: ASQUITH Model: DRG Lodpfx Aajwp Eqyoheta Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 350 mm Number of T-slots 8 T-slot spacing / pitch 240 mm T-slot size 35 mm Number of matching pieces 1 Dimensions (estimated) Length 5000 mm Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of a contract. We recommend verifying all important details.

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), X/Y/Z travel: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control system: Heidenhain TNC 150. Documentation available. On-site inspection possible. Ltedpfx Aew Duuqoahsa

Kondisi: baru, Industrial Belt Grinder Scantool 75 x 2000 Sanding belt: 75 x 2000 mm Working width: 75 mm Motor: 4.1 HP Belt speed: 34 m/sec. Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Flat grinding area: 530 mm Weight: 76 kg The industrial belt grinder models Scantool 75 x 2000 and 150 x 2000 are high-performance quality machines built according to the strictest environmental and safety standards. The belt grinders are equipped as standard with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with no-voltage release. This low-noise, CE-certified machine is ideal for grinding all types of metals. Lodpfxsd Dw Nco Aahjta Features: - Motor protection switch with no-voltage release - Separate emergency stop - Motor brake - Adjustable angle stop - Eye protection Steplessly adjustable working height allows for ergonomic working positions. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Top-quality Danish manufacture.

Kondisi: baik (bekas), panjang total: 5.000 mm, lebar total: 2.000 mm, tinggi pelat: 300 mm, Manufacturer: STOLLE Type: SDT Year of manufacture: 2000 Specifications Metric US Standard Length: 5000 mm Width: 2000 mm Height: 300 mm Number of T-slots: 5 T-slot spacing (pitch): 400 mm T-slot size: 36 mm Number of matching pieces: 1 Dimensions (estimated) Ltedpfxswp Emzs Aahoa Length: 5000 mm Width: 2000 mm Height: 300 mm Weight: 8000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details independently.

Kondisi: baru, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Belt dimensions 150 x 2000 mm Belt speed 14.5 / 29 m/sec Lsdpfx Aed Rw Rhsahjta Contact wheel Ø x width 200 / 155 mm Flat grinding table 460 x 150 mm Extraction nozzle Ø 100 mm Motor output (S1 100%) 2.1 / 2.8 kW Motor input (S6 40%) 2.8 / 3.6 kW Voltage 400 V Length 1080 mm Width 520 mm Height 1000 mm Weight approx. 85 kg

Kondisi: baik (bekas), panjang total: 5.000 mm, lebar total: 2.000 mm, tinggi pelat: 300 mm, Manufacturer: STOLLE Model: DTG Year of manufacture: 1998 Specifications Metric | US Standard Length: 5,000 mm Width: 2,000 mm Height: 300 mm Number of T-slots: 8 T-slot spacing / pitch: 250 mm T-slot size: 30 mm Dimensions (approximate) Length: 5,000 mm Width: 2,000 mm Height: 300 mm Weight: 8,000 kg Ltjdpfxowp Emho Aahea Please note: The information on this page is provided to the best of our knowledge and has been obtained from us and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all crucial details yourself.

Kondisi: baru, Industrial Belt Grinder Scantool 150 x 2000 with integrated dual extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 HP Speed: 34 m/sec Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Flat Grinding Surface: 530 mm Weight: 115 kg The Scantool industrial belt grinder models with dual extraction systems, available in 75 x 2000 mm and 150 x 2000 mm, are high-performance quality machines, built according to the strictest environmental and safety standards. These belt grinders are supplied as standard with a motor brake, adjustable working height, eye protection, angle stop, and a motor protection switch with undervoltage release. The low-noise CE-certified machine is ideally suited for grinding all types of metals. Motor protection switch with undervoltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection Continuously adjustable working height for ergonomic positioning Perfect design for fast, effective, and safe grinding Self-adjusting belt tension Ljdpfx Aoflt Aljahota Premium Danish quality

Kondisi: baik (bekas), panjang total: 3.500 mm, lebar total: 2.000 mm, tinggi pelat: 350 mm, Manufacturer: ASQUITH Model: ST-35 Specifications Metric | US Standard Length: 3500 mm Width: 2000 mm Height: 350 mm Ledpfx Aswp D S Njahota Number of T-slots: 8 T-slot spacing / Pitch: 285 mm T-slot size: 36 mm Number of matching pieces: 1 Dimensions (Estimated) Length: 3500 mm Width: 2000 mm Height: 250 mm Weight: 5250 kg Please note: The information provided on this page has been given to the best of our knowledge and, where possible, sourced from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. As such, these details do not constitute any representation or contractual terms. We recommend verifying all critical details independently.

Kondisi: baru, Bernardo belt grinding machine MS 75 x 2000 S Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec Contact wheel (Ø x W): 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port (Ø): 100 mm Motor output (S1 100%): 3.0 kW Motor input (S6 40%): 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Scope of delivery • Sanding belt K 80 • Foldable protective screen • Grinding and support table • Workpiece stop • Dust extraction nozzle • Motor protection switch • Rubber-coated contact roller • Graphite lining • Separate emergency off switch • Machine stand Ltedpsd Du S Hefx Aahja

Kondisi: baik (bekas), panjang total: 4.010 mm, lebar total: 2.100 mm, tinggi pelat: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Specifications Metric US Standard Length: 4010 mm Width: 2000 mm Height: 220 mm Number of T-slots: 13 T-slot spacing / pitch: 400 mm Ltsdpfx Aewp Dhdjahea T-slot size: 35 mm Weight per plate approx.: 5,300 kg Dimensions (Estimated) Length: 4010 mm Width: 2100 mm Height: 220 mm Weight: 5300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, has been obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. As such, it does not constitute representation or contractual terms. We recommend that you verify all essential details independently.

Kondisi: baru, Bernardo belt grinding machine MS 75 x 2000 S-2 Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction connection Ø: 100 mm Motor output (S1 100%): 1.5 / 2.2 kW Motor input (S6 40%): 2.2 / 3.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 67 kg Scope of delivery • Sanding belt K 80 Ljdpfxjd Du S Uj Aahsta • Foldable protective screen • Grinding and support table • Workpiece stop • Dust extraction nozzle • Motor protection switch • Rubber-coated contact roller • Graphite pad • Separate stop button • Base frame

Kondisi: baik (bekas), Manufacturer: STOLLE Year of manufacture: 1995 Specifications Metric US Standard Length: 2520 mm Width: 2000 mm Ltsdpfewpuxyex Aahoa Height: 230 mm Number of T-slots: 8 T-slot spacing: 252 mm T-slot size: 22 mm Approximate weight per plate: 2.7 t Number of matching pieces: 1 Dimensions (estimated) Length: 2520 mm Width: 2000 mm Height: 230 mm Weight: 2700 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, where possible, sourced from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, these details do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Ltedpfx Aorx Rxteahja Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 2.000 mm, the-manufacturer-is-lagun-goratu-model-gbm-cm5-control-system-he idenhain-itnc530-year-of-manufacture-2007-specifications-metric-x -axis-5000-mm-y-axis-1200-mm-z-axis-2000-mm-table-length-6500-mm- table-width-1100-mm-table-load-capacity-6000-kg-spindle-power-37- kw-spindle-speed-4000-rpm-tool-holder-iso-50-bt-mk-feed-rate-x-ax is-20000-mm-min-feed-rate-y-axis-20000-mm-min-feed-rate-z-axis-20 000-mm-min-milling-head-auto-index-2-5-x-2-5-working-hours-18000- h-dimensions-approximate-length-8400-mm-width-6800-mm-height-4800 -mm-weight-34000-kg-please-note-the-information-on-this-page-has- been-provided-to-the-best-of-our-knowledge-and-where-possible-obt ained-from-the-manufacturer-the-information-is-given-in-good-fait h-but-accuracy-cannot-be-guaranteed-therefore-this-does-not-const itute-a-representation-or-contractual-conditions-we-recommend-tha t-you-verify-all-important-details Lodpfx Aajvd Ddcehsta