Beli Pelurus bekas (419)

Kondisi: bekas, Decoiler Line, Uncoiler, and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and insertion aids Required space for the entire system (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through width: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Roller diameter: Ø 40 mm Number of pull rollers: 2 pcs Pull roller diameter: Ø 80 mm Entry/exit height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, centrally supported - Pull rollers hardened, ground, and hard-chromed, with hydraulic lifting - Manual adjustment of straightening rollers - Infeed aid with hydraulically extendable tongue and hydraulically adjustable deflector roller - Adjustable lateral strip guidance - All straightening rollers driven via distribution gearbox and cardan shafts - Both pull rollers driven via gearbox and cardan shafts - Frequency-controlled drive via gear motors - Straightener opening stroke of 250 mm for cleaning or processing thicker material, stroke by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Iaodpfx Asif Sg Ssa Nel Net weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with loading saddle) Coil outside diameter: max. 2000 mm (without loading saddle) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expansion range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Mandrel height above floor plate: 1500 mm - Mandrel drive by hydraulic motor and gear - Pneumatic overrun brake at the mandrel TWINFLEX - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil loading saddle with 12 ton lifting capacity and 300 mm stroke - Uncoiler in above-floor travel frame with motorized cross-travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (freestanding) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (freestanding) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jumlah rol pelurus: 7, diameter luar koil: 1.400 mm, diameter dalam kumparan: 508 mm, diameter rol: 80 mm, jumlah rol pemakan: 2, diameter rol pengumpan: 80 mm, diameter rol pelurus: 80 mm, lebar gulungan: 400 mm, kapasitas angkut: 3.000 kg, 1 Iaedpstgvgpofx Aa Nol

Kondisi: diremajakan ulang (bekas), PORTAL-RICHTPRESSE DRUCKKRAFT: 450 t HUB: 50 mm LICHTE WEITE: 1.000 mm ARBEITSBEREICH: LÄNGE: 5.200 mm Iaodpfjfcnu Iex Aa Nel BREITE: 2.300 mm HÖHE: 1.000 mm GEWICHT: 45.000 kg SCHRAUBENABSTAND LINKS-RECHTS: 1.000 mm

Kondisi: bekas, Ring-shaped horn, forged horn, ring horn, cone, forging tool, pylon sheet metal processing Isdpfx Aaji Dbz Ds Nsal - Handover: in as-is condition as inspected - Damages: see photos - Pylon: steel cone for sheet metal processing - Height: 1165 mm - Dimensions: see drawing in the photos - Overall dimensions: Ø 368 x 1165 mm - Weight: approx. 70 kg

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide Ijdpfx Aaet Hw Ams Neal 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: sangat baik (bekas), Pressure 6.3 t Reach 200 mm Stroke 200 mm Iajdpfx Aswuu A Aja Njl Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand control, various attachments

Kondisi: bekas, High-precision Surface and Scribing Plate, Steel Cast/Iron Cast, Heavily Ribbed, by STIEFELMAYER Originating from a coordinate measuring machine (CMM) with a manually guided measuring arm. Iodjftpl Djpfx Aa Noal - High-precision surface plate with good surface quality - Machine No.: 8530979 Year of manufacture: approx. 1989 - Length: 5,000 mm - Width: 2,000 mm - Thickness: 350 mm - Working height: 690 mm - Plate thickness: 50 mm (continuous) - 15 height-adjustable leveling feet - Very precise and stable longitudinal guides, bolted to the side of the plate - Space requirement (L x W x H): 5,000 x 2,120 x 400 mm - Weight: approx. 7,500 kg - Good surface condition

Tahun pembuatan: 1980, Kondisi: bekas, Bandwidth 120 - 300 mm Iaodpelil Epsfx Aa Njl Band thickness 1 - 5 mm Reference material (tensile strength) 800 N/mm²

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5m straightening beam, allowing processing of beams up to HEA-600 and HEB-600 (at S-235). The machine operates using the reliable Stierli stroke fine adjustment control system, which makes it very user-friendly and enables fast, precise straightening and bending. Additional options can be added upon request, such as a powered roller conveyor, NC control, laser measurement, and more. (Note: The photo does not show the actual machine.) Iajdpfx Aoufhzvsa Nsl

Kondisi: sangat baik (bekas), CAMU LTC 150 Sheet Metal Straightener-Flattener Technical specifications: - Side feed guides - Maximum sheet width: 1,590 mm - Maximum sheet thickness: 5 mm - Rubberized feed rollers - 8-roller straightener - Shears with disc blades, 4 upper and 4 lower Iedpfx Asvkg Idsa Noal - Control panel - Main motor: 5.5 kW Set includes 4 rollers/trolleys for sheet metal Dimensions: - Length: 1,900 mm - Height: 2,200 mm - Width: 1,400 mm Suitable for carbon steel, copper, small production runs, and frequent production changes.

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Ijdet Hwwdopfx Aa Nsal Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1970, Pressure 6 t Outreach 250 mm Iajdpfxovpaade Aa Nol Stroke 550 mm Table surface 650 x 500 mm Total power requirement kW Machine weight approx. 3.5 t Space requirement approx. 1.2 x 1.0 x 2.8 m

Kondisi: bekas, Steel Cast Iron Straightening and Welding Plate, Heavily Ribbed Iedpfxou Swb Ij Aa Nsal Former marking and measuring plate Heavy-duty straightening plate Length: 2000 mm Width: 1000 mm Thickness: 260 mm Working height: approx. 850 mm Plate thickness: approx. 40 mm throughout - 5 height-adjustable legs Weight including legs: 1250 kg Good condition

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Manufacturer: Various (European Union) Year of Manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Iaodpfjmqkt Tox Aa Nol Reference material (tensile strength): 1,000 N/mm² Tube length, input: 4 – 10 m Tube length, output: 4 – 8 m Bundle weight: max. 3,000 kg Bundle diameter: max. 600 mm Working direction: left → right Line configuration: • Tube bundle loading station I with singling MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with singling MAIR • Wet separator HANDTE • Tube bundle loading station III with singling MAIR • Tube inspection line, eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • Multi-head saw line MAIR Type MC150/7/10 • Tube end processing unit MAIR • Brushing machine MAIR • Unloading/loading MAIR • Tube bundle loading station MAIR • Tube bundling system MAIR/ORGAPACK • Emulsion processing unit SCHOENAUER • Siemens S7 control system • Hydraulics

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AP-10, jenis arus masuk: tiga fasa, tegangan masuk: 380 V, lebar total: 7.000 mm, panjang total: 23.000 mm, daya nominal: 20,5 kW (27,87 hp), sekring listrik: 60 A, Rebar Straightening and Cutting Machine – The central unit of the machine has an installed power (in kW) depending on the model. – A 3-ton capacity decoiler (winch) with pneumatic brake is supplied with the machine. – Automatic discharge table for finished products, 6 meters in length. – Machine accuracy: ±2mm. – The machine is fully automatic. – Machine speed ranges from 50 to 100 m/min. Ijdowyaywjpfx Aa Neal – The machine comes supplied with: two sets of straightening bushings, two pairs of cutting blades, and two pairs of measuring rollers. Machine Equipment ● Electrical components by Schneider, mounted in a control cabinet. ● All bearings in the machine are FAG or SKF brands.

Kondisi: siap digunakan (bekas), (Brand was originally Georg Fischer, acquired by Hämmerle AG) Compact Swiss-made machine featuring an automatic leveling pressure system to straighten and relieve stress in parts. Applications: fine-blanked components, clutch plates, brake discs, saw blades, aircraft parts, laser- and plasma-cut components, flattening parts prior to robotic welding/grinding. - Prevents deflection via 19 supporting rollers - 11 counter-rolls in the lower position - 10 counter-rolls in the upper position - upper and lower rollers are hydraulically motor-driven - overload valves protect the machine door from damage, overload, or incorrect settings - rapid setup time, requires input of 3 parameters (entry gap - exit gap - feed speed) - machine speed: 2–20 m/min maximum width: 750 mm maximum thickness: 12 mm minimum part length: 100 mm power: 31 kW total weight: 10 tons Ijdpev Rwcrofx Aa Neal

Kondisi: baik (bekas), Tahun pembuatan: 2005, Geradeausricht- und Abschneidemaschine Marke – RAVNI (Frankreich) Drahtdurchmesser min./max. – 4–10 mm Iaedpfx Aajpxnv De Njl Maximale Schnittlänge – 6 Meter Baujahr – 2005.

Kondisi: bekas, Straightening and Welding Plate SIEGFRIED WEYRAUCH Gemmingen Steel cast/grey cast iron, heavily ribbed Former marking-out and measuring plate Heavy-duty straightening plate Length: 1000 mm Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm - Feet with adjustment screws for leveling the plate Ijdpfx Aajd N H Dbj Noal Weight: 370 kg Good surface condition

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Manufacturer: various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length - feed: 4 – 10 m Tube length - discharge: 4 – 8 m Coil weight: max. 3,000 kg Coil diameter: max. 600 mm Working direction: left → right Line configuration: • Tube bundle loading station I with separation unit MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with separation unit MAIR • Wet separator HANDTE • Tube bundle loading station III with separation unit MAIR • Tube inspection line (eddy current/ultrasound) ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing plant MAIR Type MC150/7/10 • Tube end finishing machine MAIR • Brushing machine MAIR • Discharge/Loading unit MAIR • Tube bundle loading station MAIR • Tube bundling unit MAIR/ORGAPACK Iaedpfx Aaemqkubs Nel • Emulsion preparation unit SCHOENAUER • Siemens S7 control system • Hydraulic system

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Manufacturer: Various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length at loading: 4 – 10 m Tube length at discharge: 4 – 8 m Bundle weight: max. 3,000 kg Bundle diameter: max. 600 mm Working direction: left → right Line composition: Ijdpsmqkuusfx Aa Njal • Tube bundle loading station I with separation unit MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with separation unit MAIR • Wet separator HANDTE • Tube bundle loading station III with separation unit MAIR • Tube testing line eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing unit MAIR Type MC150/7/10 • Tube end finishing unit MAIR • Brushing machine MAIR • Discharge/loading MAIR • Tube bundle loading station MAIR • Tube bundling unit MAIR/ORGAPACK • Emulsion processing unit SCHOENAUER • Control Siemens S7 • Hydraulic system

Kondisi: bekas, Lebar pita: maks. 450 mm Ketebalan pita: maks. 12 mm Kecepatan: maks. 20 m/menit Iaodpfx Asxc Hyyja Nsl Jumlah rol pelurus: 3 Jumlah rol penggerak: 2 Direvisi pada tahun 1995

Kondisi: bekas, Lebar pita: maks. 450 mm Iajdpfoxc Hytjx Aa Nol Ketebalan pita: maks. 12 mm Kecepatan: maks. 20 m/menit Jumlah rol pelurus: 3 Jumlah rol penggerak: 2 Direvisi pada tahun 1995

Kondisi: bekas, Lebar pita: maks. 450 mm Ketebalan pita: maks. 12 mm Kecepatan: maks. 20 m/menit Iaodpjxc Hygefx Aa Nel Jumlah rol pelurus: 3 Jumlah rol penggerak: 2 Direvisi pada tahun 1995

Kondisi: bekas, Lebar pita: 100 mm Iaodpfxexc Ht Te Aa Njl Ketebalan pita: 0,4 - 3 mm Kecepatan: sekitar 14 m/menit Jumlah rol pelurus: 7 Jumlah rol penggerak: 2 Kontrol dalam kondisi seperti baru

Kondisi: bekas, Lebar pita: 100 mm Ketebalan pita: 0,4 - 3 mm Kecepatan: sekitar 14 m/menit Jumlah rol pelurus: 7 Iaodsxc Htmepfx Aa Njl Jumlah rol penggerak: 2 Kontrol dalam kondisi seperti baru