Beli Pemegang Perubahan bekas (875)

Kondisi: sangat baik (bekas), Weiss SC 1000/+20IU Corrosion Climate Alternating Test Chamber Weiss SC 1000/+20 JU Corrosion Climate Alternating Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. Metal components susceptible to corrosion are examined under accelerated conditions according to applicable standards. Temperature Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: +0.5K Climate Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: +0.5K relative humidity: 10...98% RH temporal humidity deviation: 3...5% RH dew point: +12 °C ... +59 °C Salt Spray Test SS (Temperature range ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray via twin-fluid nozzle, 1.5 x 0.5 mV80 cm³/h) Control Digital measuring and control system SIMCON/32*-Net with touchscreen control panel Interfaces: serial interface RS 232 C – parallel printer interface Operating Modes adjustable via process controller: - Temperature operation - Climate operation - Salt spray test - Direct spray with salt solution - Condensation load - Rinsing of test chamber walls - Drying/ventilation of test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrometric fresh measuring device tft' (with forced humidification) Technical Data SC 1000/+20 JU Usable chamber dimensions Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touchscreen control panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load: 100 kg Brine supply tank approx. 200 l, with level monitoring, located separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Ijdpfx Afeph U Dheijar Connected load: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Tahun pembuatan: 1999, Kondisi: bekas, Drehbankzubehör_ja_VDI20_Paket_3 Iaedohr Sv Tepfx Afisr

Kondisi: baik (bekas), Pneumatic cylinder bracket, swing flange, air cylinder holder, pneumatic piston holder, air piston bracket Iasdpob A Nv Sjfx Afijr -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), 3021e2fc Ijdpsxwyvqjfx Afiear

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, There are 3 identical Maag FSC 160 screen changers available. Sieve diameter min./max.: 200mm/600mm, sieve area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available. Iedott Slyopfx Afiear

Tahun pembuatan: 1989, Kondisi: sangat baik (bekas), Inventory Number: 2939 Manufacturer: Held Year of manufacture: 1989 Iedpfx Aju Un N Ejfijar Machine number: 3356 Type / Model: E90 Contact surfaces: 800 x 50 mm Speed: 8,400 rpm Connection: 1.1 kW Accessories/Equipment: Condition: good Weight: approx. 0.1 t Footprint: 550 x 500 mm Dimensions: 1,000 x 500 x 1,000 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour. Max. bottle size: 3,000 cc. Blow stations: 6. The machine is in very good condition and well-maintained. GENERAL INFORMATION The SBO 6/10 features 6 molds and 10 heating modules. It is compatible with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel’s two-stage PET stretch blow molding machines require previously produced preforms to be fed into the machine. Separating the processes of bottle and preform production allows for optimized production, increased operational flexibility, and provides higher productivity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9–41 mm (measured from the bottom edge of the support ring) Minimum internal neck diameter: 19 mm Maximum external neck diameter: 34 mm Preform support ring diameter: 29–51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle volume: 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (for still and carbonated beverages) 0.25 liter bottle: 14–20 grams 0.50 liter bottle: 20–33 grams 1.00 liter bottle: 26–40 grams 1.50 liter bottle: 35–51 grams 2.00 liter bottle: 44–58 grams 3.00 liter bottle: 68–84 grams BLOW WHEEL Height: 3.5 meters Number of molds: 6 Clamping force: 10 tons Article height (below the neck) at outlet: approx. 1.4 meters Machine DC drive motor power: 4 kW HEATING CONDITIONER Height: 2 meters Isdpfx Aog Ailcofioar Number of oven heaters: 10 Number of heating zones per unit: 8 Maximum power: 170 kW ELECTRICAL USAGE Maximum supplied power: 200 kW Average consumption: 100–150 kW/h (varies depending on bottle produced) COMPRESSED AIR Supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies depending on bottle produced) Blowing pressure – champagne base: up to 25 bar Blowing flow – champagne base: 110–550 Nm3/h Blowing pressure – petaloid base: up to 35 bar Blowing flow – petaloid base: 155–770 Nm3/h COOLING WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 cubic meters/hour Up to 16,000 Kcal/hour heat to be removed WEIGHT Blow wheel with molds: 8 tons Heating conditioner: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING CONDITIONING The preforms are conveyed to the heating conditioning unit with the necks facing upwards. This unit continuously ensures that the preforms are inverted before being presented neck-down in front of the heating modules, and then inverted again. During the heating phase, the preforms are rotated and their necks are protected from heat to optimize temperature distribution without deforming the neck. Heating is achieved through 10 heating modules. Each unit can accommodate up to 8 horizontally arranged infrared lamps, which are air-cooled at the ends. The heating output of 8 zones, corresponding to the 8 lamp rows, is adjustable to optimize the heat profile. These zones are regulated on all SBO models. After heating, preform temperature is monitored by an infrared camera to regulate the controlled zones, ensuring the maintenance of the required temperature.

Kondisi: bekas, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Seco, tool changing system with tool arm -Drive unit: TP type MRC-S28-1V-210 Iaodpfjg U A I Hox Afier -Dimensions: 780/420/H300 mm -Weight: 66 kg

Kondisi: bekas, Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring tool holder, quick-change boring bar holder, quick-change turning tool holder -Manufacturer: AXA, quick-change turning tool holder Multifix D1H 63180 -Mounting dimensions: see photos Ijdohpu Uqepfx Afijar -Clamping length: 180 mm -Dimensions: 180/95/H185 mm -Weight: 8.3 kg

Kondisi: bekas, Assembly kit, format processing unit, machining unit, milling unit, profiling milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine, profile holder for edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Overall dimensions: 665/540/H375 mm -Weight: 30 kg Iasdpfx Afegy T Nboisr

Kondisi: bekas, Tool changer for lathe, compound rest, cross slide, dovetail guide -with four-way tool holder Iajdpfjb Uhq Tex Afijr -Dimensions: see photos -Measurements: 400/260/H200 mm -Weight: 25.2 kg

Kondisi: bekas, Tool holder, milling holder, milling tool - Holder: MK4 (Morse taper 4) - Length: 1103 mm - Extendable to: 440 mm Iasdpfx Aed Rz D Hsfisr - Dimensions: see drawing in the photos - Weight: 12.9 kg

Kondisi: bekas, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Iasdpob Imxvefx Afior - Drawers: 2 - Shelf: 1 - Holders for: SK40/SK50 milling tool holders - Dimensions: 660/1030/H1200 mm - Weight: 190 kg

Kondisi: bekas, en-1 Isdpfohd Rqxox Afioar

Kondisi: bekas, Quick-change chuck, quick-change holder, quick-change head, keyless drill chuck, milling chuck, quick-change insert, collet chuck, reducing sleeves, slip-on holder Iaedpfjhh Tk Tsx Afior - Quick-change chuck: Mount: MT3 / 32 mm - Dimensions: see photos - Size: Ø 60 x 173 mm - Weight: 1.2 kg

Kondisi: bekas, Quick-change chuck, quick-change holder, quick-change head, keyless drill chuck, milling chuck, quick-change insert, collet chuck, reduction sleeves, plug-in holder - Quick-change chuck: Mount: MT2 / 26 mm - Dimensions: see photos Iodpfxjhh Tlbo Afiear - Size: Ø 52 x 146 mm - Weight: 0.7 kg

Kondisi: bekas, Tool holder, extension -Shaft mount both sides: Ø 71 mm -Drawing available in the images -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg Ijdpfx Asc Nir Defiear

Kondisi: bekas, tool holder, clamping plate with T-slot Iodpfx Aed I Szfofioar - Holder: 36 - 39 x 18 x 75 mm - Dimensions: 145/135/H170 mm - Weight: 4 kg

Kondisi: bekas, Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part originates from: BJM machining center, Type ALBZ-145 -Tool changing system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg Iaodpfxefcr Nbj Afier

Kondisi: bekas, Tool holder, milling chuck, milling tool, adapter, clamping unit - Manufacturer: Walter, 41 units SK50 holders / clamping units - Various types: see photos, additional images available upon request - Sale price: complete package Iajdpfx Aegkw I Iofijr - Overall dimensions: 700/600/260 mm - Weight: 129 kg

Kondisi: bekas, Quick-change chuck, quick-change adapter, quick-change head, quick-release drill chuck, quick-change insert - Shank: MT4 - Tool holder: MT4 - Dimensions: Ø 87/268 mm - Weight: 4.1 kg Iasdpfx Ajd R Smysfijr

Kondisi: sangat baik (bekas), Suspension clamp, rail holder, rail, running rail, rail clamp, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helm, rail holder with hinged bracket -Type: HL width 80 mm -Dimensions: see photos -Quantity: 3x holders available -Price: per piece Ijdpjwcddfefx Afiear -Measurements: 180/140/H130 mm -Weight: 4.3 kg/pc.

Kondisi: baik (bekas), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange Iajdjw Dn Rxopfx Afier - Grinding wheel mount: with grinding stone - Mounting diameter: Ø 55 mm, see photos - Grinding stone: 420 x 60 mm, unfortunately without type designation - Transport dimensions: Ø 420 x 87 mm - Total weight: 37 kg

Kondisi: baik (bekas), Grinding wheel adapter, standard flanges, special flanges, grinding wheel flange - Grinding wheel adapter: with grinding stone, 2 units - Mount: bore shaft, taper Ø 50-60 mm - Grinding wheel: Ø 225 x 40 mm - Delivery/price: complete - Each dimension: Ø 225 x 90 mm Iasdpfsw Dpc Ajx Afisr - Weight: 10.4 kg/unit

Kondisi: baik (bekas), Test mandrel, tool holder, milling arbor, milling tool - Manufacturer: Bahmüller, boring bar Iedpfx Afovz Urxjiear - Length: L = 158.406 mm - Radius: R = 19.937 mm - Interface: HSK50 - Dimensions: Ø 50 x 183 mm - Weight: 1.6 kg