Beli Penghangat Ruangan Coil bekas (13.464)

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Bedpfx Aszizghod Rjwr Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Bwjdpjzizdyefx Ad Rsr Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Vötsch Type: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With a temperature change rate of 5 K/min Bwedoziyx Njpfx Ad Rer Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation over time (center of working space): ±0.1 K to ±0.5 K Temperature deviation spatially: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for Climatic Testing: Temperature range: +10°C to +95°C Temperature deviation over time (center of working space): ±0.1 K to ±0.3 K Temperature deviation spatially: ±0.5 K to ±1.0 K Humidity deviation over time (center of working space): ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climate range: 2°C/95% r.h. controlled for max. 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side ports: 50 mm, 125 mm Operating Data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Fusing (site provided): 63 A slow-blow Refrigerants: R404A / R-23 Weight: approx. 570 kg Important Safety Information for Buyers! The following steps are carried out on each chamber we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leakage test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, we would be happy to assist you by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT³ 4100 Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data logging & documentation (e.g., temperature cycle, alarms) - USB port for data export (CSV, optionally S!MPATI-compatible) Bedpeziyxpefx Ad Rewr - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test chamber volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Rate of temperature change (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation power: 4500 W - Calibration points: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The chamber is equipped with feedthroughs on both the right and left sides. These allow for inserting measurement cables and test fixtures into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your confidence as a buyer, the following work is performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful verification, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Kondisi: baik (bekas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 liters Performance Specifications for Temperature Testing - Temperature Range: -70 to +180°C - Temporal Temperature Deviation K: ±0.1 to ±0.5 - Spatial Temperature Deviation K: ±0.5 to ±2.0 - Temperature Gradient: 1 to 4 K - Rate of Change: - Cooling: 6.7 K/min - Heating: 6.8 K/min - Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature Calibration Points: +23°C and +80°C Performance Specifications for Climate Testing - Temperature Range: +10 to +95°C - Temporal Temperature Deviation: ±0.1 to ±0.3 K - Spatial Temperature Deviation: ±0.5 to ±1.0 K - Temperature Gradient: 1 to 2 K - Humidity Range: 10 to 98% - Temporal Humidity Deviation: ±1 to ±3% - Dew Point Range: -3 to +94°C - Heat Compensation: 400 W - Climate Calibration Points: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R452A / R-23 Important Safety Information for Buyers! The following procedures are carried out on all chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run Condition: Used Bsdpfjziyxisx Ad Rowr Scope of delivery: (See images) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS temperature test chamber We offer you a CTS temperature test chamber. Water-cooled Model series: T-40/600 Includes metal braces to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Bjdpfx Ajziyw Sod Rewr Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for your security as a buyer! The following checks are carried out on our listed chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications reserved!) If you have further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer you a climate test chamber. Water-cooled Test chamber volume: 350 liters Internal dimensions: Height 750 mm x Width 650 mm x Depth 720 mm External dimensions: Height 1800 mm x Width 850 mm x Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.h. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.h. over time up to 90% r.h.; max. ±1 - 3% r.h. over time above 90% r.h. Bedpfxeziyw Eo Ad Rowr Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Type: CS-70/350 Important information for you as a buyer: The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a test run monitored using calibrated instruments. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Weiss Type: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Model Series WK3-../0 with SIMPAC* control system Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulbs 2 x 24 V, 50 W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Main fuse required: 16 A slow-blow Protection class (control cabinet and operating unit): IP 54 Maximum heat output to ambient: 1200 W Sound pressure level (measured 1m from the front at 1.6m height): 46 dB(A) Data for temperature testing: Temperature range: -5°C to +90°C Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.5 K Bwodpfjziywrex Ad Rsr Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climate testing: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98% r.h. Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg Important safety information for you as the buyer! The following measures are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New, legally compliant refrigerant refill 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of supply: (see image) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min Rate of change: Heating approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Specification sheet External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Bsdpfx Adeziyvus Rewr Refrigerant: R 404A For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. When required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Delivery contents: (see photo) (Specifications and details subject to change and errors reserved!) Should you have further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test Chamber Volume: 990 liters Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate (Cooling): 0.2 K/min Temperature Change Rate (Heating): 0.5 K/min Bwodpfxoziypue Ad Rer Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Homogeneity: ±0.5 to ±1.0 K Heat Compensation at +20°C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% r. H. Temporal Humidity Deviation: ±1 to ±3% r. H. Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Homogeneity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V±10% 50Hz Rated Power: 2.3 kW Rated Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data, information may vary!) Feel free to contact us by phone for further questions.

Kondisi: sangat baik (bekas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Temperature change rates: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 W Data for climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ±0.1 to ±0.3 K Bodpfx Asziypnod Rjwr Spatial temperature uniformity: ±0.5 to ±1.0 K Temporal humidity deviation: ±1 to ±3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your safety as a buyer, please note the following! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Technical specifications and details are subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), en-01 Bwedpfoziygyjx Ad Rjr

Kondisi: sangat baik (bekas), Feutron temperature test chamber We offer a temperature test chamber here. Feutron temperature test chamber, air-cooled Test chamber nominal volume: 280 liters Bsdpfeziyggjx Ad Rjwr Dimensions Chamber external: 1500 x 2040 x 1075 mm With fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Power supply: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following actions are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run using calibrated measuring instruments. Condition: used Scope of delivery: (See images) (Specifications subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber T-70/600 Water Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Bwsdpfxsziycbs Ad Rjr Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for setpoint and actual temperature values - Easy adjustment via +/- buttons - Digital temperature input in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test specimen activation Insert Shelf: Stainless steel, support surface 820 x 710 mm Max. load per shelf: 35 kg Total load with maximum shelving: 100 kg Refrigeration Unit: Water-cooled, low-noise, fully hermetic with continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K (time-based) Temperature change rate: According to DIN 50 011, Part 12, measured in the center of the test chamber - Heating: 2.5 K/min - Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Internal chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" internal thread Sound pressure level:

Kondisi: sangat baik (bekas), Here we offer a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32-Control, Water-Cooled Control Panel »Touch Panel« All control and operating commands can be executed by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. Measurement cables and test equipment can be routed into the test space through these. Feedthroughs included in the standard configuration: - R1: nominal width 125 mm - L1: nominal width 50 mm (Refrigerant retrofitted to R-452A) Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: - Temperature range: -42 to +180 °C - Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation: 2,500 W Operating data: - Test space lighting: Halogen bulb 2 x 24 V, 50 W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz Bedpfx Adsziyb Rs Rswr - Rated current: 15 A, Rated power: 7.8 kW - External fuse: 16 A slow-blow - Sound pressure level: Approx. 58 dB(A) measured at 1 m distance from the front, 1 m height - Refrigerant: R-452A - Weight: 620 kg - Type: WT3-600/40 Important safety information for you as the buyer! The following work is carried out in advance on the test chambers we offer: 1. Functional check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Dijual sebuah mesin pemotong koil CNC DIMECO LINAPUNCH MC-F berkinerja tinggi untuk pemrosesan otomatis material lembaran langsung dari koil. Mesin ini sangat cocok untuk produksi ekonomis lembaran berlubang, pelat perakitan, rel pengikat, komponen ventilasi, serta suku cadang yang dipotong khusus dalam jumlah sedang hingga besar. Dengan pemrosesan langsung dari koil, konsumsi material, waktu persiapan, dan biaya per unit berkurang secara signifikan. Teknologi LINAPUNCH menggabungkan fleksibilitas mesin pemotong CNC dengan produktivitas jalur koil kontinu. Mesin ini menggunakan alat Thick-Turret standar dan memungkinkan proses manufaktur yang sangat produktif. Data Teknis Produsen: DIMECO Tipe: LINAPUNCH MC-F Jenis Mesin: Mesin pemotong koil CNC / Jalur pemotong Kontrol: CNC, Siemens Simostar 370 Pemrosesan Koil Diameter dalam koil: 508/610 mm Diameter luar koil maks.: 1700 mm Berat koil maks.: 6000 kg Lebar lembaran min./maks.: 170 hingga 525 mm Ketebalan material: 0,4 hingga 3 mm Panjang produk maks.: 6000 mm Panjang pengumpanan dapat diprogram Pengumpanan lembaran NC yang dikendalikan servo Panduan lembaran otomatis Teknologi Pemotongan Gaya pemotongan: sekitar 20 ton Sistem pemotongan multi-sumbu (sumbu X/Y) Langkah pemotongan yang dapat diprogram Fungsi Auto-Index Fungsi Multi-Index Dudukan untuk alat Thick-Turret standar Jumlah punch: 26 buah Jumlah kepala pemotong: 1 buah Jumlah alat revolver: 2 Terdiri dari: Penggulung koil Unit pelurus Pengumpanan NC Kepala pemotong LINAPUNCH MC-F Gunting geser Unit penanda tinta Stapler pintu jatuh 2 buah meja pengangkat Panel kontrol dengan kontrol CNC Pelindung keselamatan Area aplikasi: Industri elektronik Konstruksi lemari kontrol Teknologi ventilasi dan iklim Pemrosesan logam Produksi profil dan komponen Bwsdpfjzmv Dvox Ad Rer Produksi massal dari material koil EXW, Bantuan dapat diberikan untuk pembongkaran dan pemuatan.

Kondisi: bekas, berat kosong: 7.725 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2018, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.780 mm, volume ruang muat: 93 m³, suspensi: udara, ukuran ban: 385/65 R22,5, warna: putih, Tahun pembuatan: 2018, jarak tempuh: 314.581 km, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.743 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2018, suspensi: udara, Tahun pembuatan: 2018, Perlengkapan: ABS,

Kondisi: baru, Tahun pembuatan: 2026, Kondisi: Baru Tahun pembuatan: 2026 Nomor gudang: 070235 Waktu pengiriman: September 2026, perkiraan Negara asal: Turki Harga: 4.800 € Berat gulungan: 500 kg Diameter luar gulungan maksimum: 1200 mm Diameter dalam gulungan minimum: 400 mm Diameter dalam gulungan maksimum: 550 mm Lebar gulungan maksimum: 300 mm Lebar gulungan minimum: 50 mm Lebar gulungan minimum pada varian dengan lengan penekan pneumatik: 80 mm Motor: 0,55 kW Panjang: 1400 mm Lebar: 1200 mm Tinggi: 1550 mm Berat: 190 kg Penggerak motor Mandrel gulungan yang dapat disesuaikan secara mekanis dengan 4 penjepit Pengaturan kecepatan untuk kecepatan pelepasan, serta waktu percepatan dan perlambatan Bwodpfx Adswirz Ss Rsr Sensor kedekatan fotoelektrik SICK untuk kontrol kelonggaran ALTERNATIF (Harga berdasarkan permintaan): Varian dengan lengan penekan pneumatik Varian tanpa penggerak, dengan rem, dengan atau tanpa lengan penekan pneumatik

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 03/2017, warna: lain, Tahun pembuatan: 2017, Berat kosong: 7.140 kg Poros 1: kiri 8 mm, kanan 6 mm Poros 2: kiri 8 mm, kanan 8 mm Poros 3: kiri 8 mm, kanan 8 mm Bwodezmu N Depfx Ad Rer

Kondisi: bekas, berat kosong: 7.814 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2015, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.700 mm, volume ruang muat: 91 m³, suspensi: udara, ukuran ban: 385/65 R22,5, Tahun pembuatan: 2015, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.743 kg, berat muatan maksimum: 30.257 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2017, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.700 mm, volume ruang muat: 91 m³, suspensi: udara, ukuran ban: 385/65 R22,5, Tahun pembuatan: 2017, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.743 kg, berat muatan maksimum: 30.257 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 08/2017, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.700 mm, volume ruang muat: 91 m³, suspensi: udara, ukuran ban: 385/65 R22,5, Tahun pembuatan: 2017, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.743 kg, berat muatan maksimum: 30.257 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2018, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.700 mm, volume ruang muat: 91 m³, suspensi: udara, ukuran ban: 385/65 R22,5, Tahun pembuatan: 2018, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.743 kg, berat muatan maksimum: 30.257 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2018, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.780 mm, volume ruang muat: 91 m³, suspensi: udara, ukuran ban: 385/65 R22,5, Tahun pembuatan: 2018, Perlengkapan: ABS,