Beli Planet Berkendara bekas (918)

Kondisi: bekas, jarak tempuh: 278.824 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 06/2019, berat keseluruhan: 26.000 kg, jenis bahan bakar: diesel, warna: abu-abu, konfigurasi gandar: 6x4, berat muatan maksimum: 14.000 kg, berat kosong: 12.000 kg, jarak roda: 3.900 mm, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat duduk: 2, Perlengkapan: ABS, derek, hidrolik, kebisingan rendah, kendali jelajah, komputer bawaan, kontrol traksi, kunci diferensial, pendingin udara,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, HAARUP 750l/0,5m3 mixer planetarium setelah pemeriksaan, dalam kondisi sangat baik Dwsdpfx Aaoxl D R Ioyjc

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 34.900 mm, panjang total: 9.040 mm, - Rotating Telehandler RTH 6.35 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 34.90 m - Rotation: 360 degrees (continuous) - Engine: Volvo TAD 583 VE, Stage V - Rated power: 175 kW (238 HP) at 2,300 rpm - Maximum torque: 975 Nm at 1,380 rpm - Displacement: 5.13 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump flow: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes on each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Maximum travel speed: 40 km/h - Maximum towing force at lifting hook: 152 kN - Gradeability: 65% - Turning radius (with forks): 7,000 mm - Diesel fuel tank: 270 l - AdBlue tank: 40 l - Hydraulic oil: 220 l - Engine oil: 16 l - Coolant: 40 l - Maximum operating pressure: 350 bar - Hydraulic system type: Load sensing - Working pump: Danfoss / Rexroth variable displacement pump - Boom and uppercarriage movement distributor: Danfoss electro-proportional valve SIL 2 - Stabilizer distributor: Bosch Rexroth electro-hydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with dead man's switch - Control system with CAN-bus technology Dwsdpfxexgi Eaj Aayoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 015 USED Dough Divider WP Type V-500. TECHNICAL SPECIFICATIONS: - 2-chamber dough divider, - range: 150–1,200 g, - hourly output: up to 3,000 pieces. The machine is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: transport / installation / commissioning. The price quoted is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. Djdpevn I T Nefx Aayewc Our offer includes deck ovens, rack ovens, pastry ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, spiral mixers, planetary mixers, dough sheeters, croissant formers. See all our listings.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Control: Siemens Sinumerik 840D Working Area Swing diameter over bed: 820 mm Swing diameter over cross-slide: 520 mm Cross-slide travel (transverse): 600 mm Tool Holder: Front: Capto Size C6 – Multifix D1 Rear: Boring stand with clamping claw Centre Distance: 3000 mm Main Spindle Drive Power, digital AC motor – 60% duty cycle: 46 kW Dodpfx Asxgdfbsayjwc Gear stages: 2 pcs (ZF planetary gearbox, electrically shifted, mounted externally to the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 Size/mm Spindle – Ø at front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle Ø at front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross-Slide Feed range (transverse): 0.001 – 1000 mm/min Feed range (longitudinal): 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min With centre distance: 4000 mm Feed force transverse: 16,000 N Feed force longitudinal: 22,000 N Turning tool cross-section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill stroke: 280 mm Taper: 6 Mk Electrical Equipment Three-phase current: 400 V, 50 Hz Constructed in accordance with VDE and EMC directives EN50081-2 / EN50082-2 Interference suppression level A according to EN50081-2 For TN-S or TN-C networks/industrial networks without RCD protection Dimensions Machine (L × W × H): 2.88 m + centre distance × 2.55 m × 2.32 m Machine weight (Centre distance / Weight approx. kg) 3000 mm: 10,900 kg

Kondisi: bekas, Tahun pembuatan: 2007, Pressing force 200 t Throat depth 510 mm Stroke 16 - 160 mm Ram adjustment 120 mm Table area 1500 x 1000 mm Table height above floor 900 mm Die opening in table 800 x 250 mm Ram area 1000 x 700 mm Ram pin hole 65 x 110 mm T-slot width 28 mm Adjustable stroke rate 30 - 120 min Hydraulic unit oil capacity 5 l Installation height (full stroke up, ram adj. up) 600 mm Installation height (stroke down, ram adj. up) 440 mm Total power requirement 32.2 kW Machine weight approx. 24 t Space requirement approx. WxDxH 2.85 x 3.1 x 3.65 m - hydraulic clutch - fixed table - hydraulic overload protection in ram Dwedpfxevbk Rws Aayec - hydraulic connecting rod clamping - motorized ram height adjustment 120 mm with digital display for set ram height, rapid and inching mode - fully automatic stroke adjustment, range 16 - 160 mm - ram weight compensation - electronic TDC correction - planetary gearbox - oil circulation central lubrication - separate control panel with SIMATIC S7/300 screen control - pressing force measuring device - reversing circuit (return) - additional operating mode “setup – inching mode” - electric stroke counter - electric preset counter - electric connecting rod pin travel limiter - electronic cam controller - continuously variable drive (frequency controlled) - 2 sockets - clamping plate - main bearing / support bearing / connecting rod bearing temperature monitoring - operating hours counter - oil cooler - set of vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Air gap: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2486908, Tahun pembuatan: 2021, kapasitas angkut: 4.999 kg, tinggi angkat: 20.700 mm, jenis bahan bakar: diesel, tinggi konstruksi: 3.090 mm, daya: 98,56 kW (134,00 hp), panjang garpu: 1.200 mm, berat keseluruhan: 16.500 kg, tinggi total: 3.090 mm, panjang total: 6.570 mm, lebar total: 2.500 mm, warna: merah, Perlengkapan: garpu palet, kabin, Data Teknis Tahun Pembuatan: 2021 Mesin: Mesin diesel Transmisi: Transmisi dropbox dengan 2 mode berkendara (maju & mundur) Kapasitas angkat maks.: 4.999 kg Ketinggian angkat maks.: 20,70 m Putaran: 360° Daya nominal: 100 kW - 134 HP Kapasitas silinder: 3,6 l Jumlah silinder: 4 Kemampuan tanjakan maks.: 44% Tipe mesin: Diesel dengan direct injection Kecepatan maksimum: 40 km/jam Berat total: 16.500 kg Dimensi total (P x L x T): 6,57 m x 2,50 m x 3,09 m Panjang fork: 1,20 m Sepenuhnya berfungsi Terdapat jejak pemakaian umum. Dedpfx Ajxlz Htsayswc

Kondisi: bekas, jarak tempuh: 20.553 km, daya: 260 kW (353,50 hp), pendaftaran pertama: 09/2023, berat keseluruhan: 18.000 kg, jenis bahan bakar: diesel, warna: oranye, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, kapasitas angkut: 2.500 kg, jam operasional: 1 h, berat kosong: 2.420 kg, jenis bahan bakar: hibrida, jenis penggerak: Hybrid, jangkauan lengan: 12.850 mm, Mini crane Technical condition: New Description: The M250 comes standard with high-quality equipment and relies on well-known suppliers - Adjustable undercarriage - Black tracks - Drive via planetary gearbox with integrated brake - Two travel speeds, proportional control - Kubota 3-cylinder diesel engine, 18.5 kW, STAGE 5-TIER 4, water-cooled - Six-position adjustable and swiveling outriggers - Automatic outrigger leveling Dwedpfjw Rhpmex Aayjc - Continuous 360° rotation - Three-section telescopic boom / double lift via chain mechanism - Scanreco 6-channel radio remote control with LCD display - Electrical system with CAN bus - Microprocessor-controlled load moment limiter - Hydraulic circuit with proportional Hawe multi-function valve block - Lifting and lashing eyes - Chassis and boom base color: black - Attachments and cylinders: orange - Two LED headlights for travel operation - Remote maintenance connection system: BG-CONNECT - Reference standard: EN13000 Additional features: - Automatic engine speed increase - 230V electric motor, 2.2 kW with inverter and control panel - Hydraulic jib with 2 extensions, operating range of 195°, incl. hook - Hydraulic winch under the telescopic boom, lifting capacity 1,000 kg (65 m rope length) with rope guide rollers - Sheave at the tip of the main boom - Sheave up to the tip of the jib - Four-position adjustable boom head at the tip of the telescopic boom - Adjustable boom head at the tip of the jib - Support pads and storage case on crane M250 - Storage box for remote control on the crane column - 1 pair white tracks - Sheave for triple line pull incl. hook block - Sheave for single line pull - LED lights on main boom and jib - Coming Home function - BG-Connect2.0 – for 1 year - Straight SCHUKO-to-CEE adapter with 1.5 m cable

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 6.000 kg, tinggi angkat: 25.000 mm, panjang total: 8.680 mm, - Rotating Telescopic Handler RTH 6.25 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 25.00 m - Rotation: 360° continuous - Rated output: 100 kW (136 HP) at 2,200 rpm - Max. torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss/Rexroth - Max. pressure: 480 bar - Delivery volume: electronically controlled axial piston pump, variable displacement motor - Transmission: dropbox transmission with 2-speed forward and reverse gear - Axle type: axles with planetary final drives - Rear axle: steered oscillating axle with hydraulic lock - Front axle: oscillating steering axle with +/- 8 degrees leveling - Service brake: oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Max. travel speed: 40 km/h - Max. drawbar pull at lifting hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 6,390 mm - Diesel fuel capacity: 175 l - AdBlue: 10 l - Hydraulic oil: 165 l - Engine oil: 9 l - Coolant: 20 l - Max. operating pressure: 350 bar - System type: load sensing Dwodpfexf Nn Sox Aayoc - Working pump: Danfoss/Casappa - variable displacement pump - Distributors for boom and upper carriage movements: Danfoss - SIL 2 proportional solenoid valve - Outrigger distributors: Bosch Rexroth - electrohydraulic actuators - Motion control: two 2-axis Danfoss joysticks with dead man function, CAN-bus control

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Spesifikasi: Umum Panjang: 16,61 m saat transportasi, 19,76 m saat operasi Tinggi: 4,01 m Lebar: 3,30 m Berat: 42.638–48.988 kg Roll Atas (Top Feed Roll) Motor – Torsi tinggi Poclain Roll Bawah (Bottom Feed Roll) Motor – Planetary Brevini torsi tinggi dengan motor hidrolik Char-Lynn Konveyor Umpan – sabuk atau rantai 1.120 mm Panjang – standar 4,88 m; opsional 6,10 m Lebar – 1.520 mm Motor – Planetary Brevini torsi tinggi dengan motor hidrolik Char-Lynn Konveyor Pengeluaran Panjang – 15,24 m Lebar – 1.520 mm Tinggi keluaran – 5,18 m Motor – torsi tinggi Char-Lynn Mesin Standar: CAT C-27, 1050 hp; kopling PT Tech HPTO 15 Opsi: CAT C-32, 1200 hp; kopling PT Tech HPTO 21 Penggerak V-belt lengkap; sabuk 8-V 12-14 alur dengan pelindung Dwjdpfxoxd D Nhe Aayec Kipas Flexaire Kipas radiator dengan pitch reversibel yang secara otomatis (dapat disetel) membalik arah aliran udara setiap 5–15 menit

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 302 h, Scissor lift Genie 3246, 11,9 m * Ketinggian kerja 11,9 m * Tinggi platform 9,9 m * Kapasitas keranjang 317 kg * Berat 2793 kg * Penggerak: listrik 24 Volt dengan charger terintegrasi * 302 jam berdasarkan data pada penghitung * 2 tingkat kecepatan berkendara * Dimensi (P x L x T): 2450 x 1180 x 2390 mm (tanpa pagar 1750 mm) * Pagar dapat dilipat * Ban tidak meninggalkan jejak * Profil 0-3 mm * Ukuran ban 15x5 * Konfigurasi roda 4x2 * Jarak sumbu roda 1850 mm * Keranjang konstruksi baja * Ukuran keranjang (P x L x T): 2140 (+900) x 970 x 1100 mm * Platform dapat diperpanjang 900 mm Dwjdpfx Aajxfnhdoyjc * Kontrol dari keranjang dan lantai ---- Deskripsi ini bukan penawaran yang mengikat dan dapat mengandung kesalahan. Tidak ada jaminan atas seluruh informasi. Kunjungi juga situs web kami.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2486868, Tahun pembuatan: 2021, kapasitas angkut: 4.999 kg, tinggi angkat: 20.700 mm, jenis bahan bakar: diesel, tinggi konstruksi: 3.090 mm, daya: 98,56 kW (134,00 hp), panjang garpu: 1.200 mm, berat keseluruhan: 16.500 kg, tinggi total: 3.090 mm, panjang total: 6.570 mm, lebar total: 2.500 mm, warna: merah, Perlengkapan: garpu palet, kabin, Data Teknis Tahun Pembuatan: 2021 Mesin: Mesin diesel Transmisi: Transmisi dropbox dengan 2 mode berkendara (maju & mundur) Kapasitas angkat maks.: 4.999 kg Djdpfexlz Hmsx Aayewc Ketinggian angkat maks.: 20,70 m Putaran: 360° Daya nominal: 100 kW - 134 HP Kapasitas silinder: 3,6 l Jumlah silinder: 4 Kemampuan tanjakan maks.: 44% Tipe mesin: Diesel dengan direct injection Kecepatan maksimum: 40 km/jam Berat total: 16.500 kg Dimensi total (P x L x T): 6,57 m x 2,50 m x 3,09 m Panjang fork: 1,20 m Sepenuhnya berfungsi Terdapat jejak pemakaian umum.

Kondisi: bekas, jarak tempuh: 20.553 km, daya: 260 kW (353,50 hp), pendaftaran pertama: 09/2023, berat keseluruhan: 18.000 kg, jenis bahan bakar: diesel, warna: oranye, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 730 h, kapasitas angkut: 500 kg, berat kosong: 21.500 kg, jenis bahan bakar: diesel, jenis penggerak: Diesel, jangkauan lengan: 12.600 mm, tinggi kerja: 18.700 mm, Platform kerja dua arah Kondisi teknis: baik Dwodjtv Sx Aopfx Aayec Deskripsi: Lebar jalur standar: 1435 mm, sistem penggerak dan pengereman rel hidrostatis, beberapa mode berkendara: 4WD/2WD/gerak anjing, kemudi empat roda untuk perlintasan rel yang lebih baik, perataan otomatis untuk kompensasi overhang hingga 200 mm, pantograf opsional memungkinkan pengukuran kabel kontak, pembatasan pengangkatan dan putar (mekanik dan elektronik), mesin Diesel EU Stage V Hatz 4H50, 2 layar diagnostik.

Kondisi: baru, The ML100 tube grinding machine is the ideal choice for surface grinding and polishing of round, oval, and elliptical tubes—whether straight or bent. Available from EUR 9,900, depending on configuration. The planetary belt system of the ML100 enables belt grinding without tube rotation, delivering top-quality results. Dedod Hfnbepfx Aayewc The feed system safely guides straight tubes into the grinding station, ensuring consistent and productive surface quality. Minimal vibration on long tubes: With the ML planetary belt system, there is no rotation of the tube. The abrasive belts rotate around the tube while it is conveyed straight through the station. Polishing of straight or bent tubes: The ML100 is designed to finish straight tubes (automatically) or bent tubes (manually). Quick setup: The automatic feed can be simply removed via hinges, making it easy to process bent tubes. Reduced heat generation: Unlike other conventional systems, the planetary belt system significantly reduces friction heat on the tube surface. Oval tubes: Surfaces of oval or elliptical tubes can be safely processed with the ML100. Maximum adaptability of the abrasive belt to holes or gaps in the tube. Technical data – ML100: Working capacity (Ø mm): 10 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, DECANTER CENTRIFUGE – HIGH PERFORMANCE – CBB DECANTER SERIES I CD 45IC CBB Series I CD 45IC Decanter Centrifuge, throughput up to 37 m³/h, drum Ø430 mm, efficiency 95–98%, drum motor 30 kW IE3, screw conveyor with tungsten carbide protections and HV 3000 bushings. Complete with DPC control panel with touchscreen and accessory kit. Main data: • Brand / Model: CBB Decanter Series I – CD 45IC • Year of manufacture: 2020 • Type: High-performance variable speed hydraulic decanter centrifuge • Hydraulic throughput: up to 37 m³/h (variable depending on product) • Drum diameter: Ø430 mm – Length 1800 mm • Maximum centrifugal force: 3820 G • Separation efficiency: 95–98% • Liquid discharge levels: 10 adjustable positions • Machine weight: 3,330 kg • Dimensions: 3796 x 1206 x 1550 mm (LxWxH) Construction features • Drum and screw conveyor in Duplex stainless steel with tungsten carbide wear protections. • Wear parts in HV 3000 ceramic. • Solid and liquid outlets in openable and easily inspectable Duplex. • Screw conveyor with wear protections and counter-current separation principle. • “Split case” frame and housing with quick access for maintenance. Drive system • Drum electric motor 30 kW – 4 pole – IE3 – IP55. • Solid scraper electric motor 0.37 kW – 4 pole – IE2. • Drum drive with inverter (included in control panel). • Screw conveyor drive via hydraulic circuit with Cyclo planetary gearbox. • Combined electro-hydraulic system with energy recovery. • DPC (Decanter Process Controller): complete process management, variable differential speed control, overload protection and remote monitoring. Electrical panel QE CD 45I • Dimensions: 800 x 600 x 2300 mm – Weight 330 kg. • IP55 protection. Dwsdpfexlki Dox Aayjc • Touchscreen for parameter management, status and alarm display. • Integrated DPC (Customer Card CBB Decanter). • ModBus communication, pre-configured for remote support. • Complete management of sludge pumps, polymer pumps, sensors, solenoid valves and automatic washing cycles. Standard equipment • Electric panel with DPC + touchscreen. • Lubrication kit for bearings and gearbox. • Solenoid valve kit for internal/external drum washing. • Spare sensor kit (speed and vibration). • Spare hydraulic oil filter kit. • Machine manuals + electrical panel manual (2 hard copies + 1 electronic copy).

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 296 h, Platform kerja self-propelled, vertical mast Haulotte, tipe Star 10 * Ketinggian kerja 10 m * Ketinggian platform 8 m * Jangkauan samping 3 m * Tahun produksi 2018 * 296 jam menurut penghitung * Penggerak elektro-hidraulis * Aki 24 V dengan pengisi daya terintegrasi * 2 mode berkendara * Ukuran ban 16x5 * Profil 10-17 mm * Ban anti-marking * Jarak sumbu roda 1200 mm * Konfigurasi roda 4x2 * Dimensi total (P x L x T) 2650 x 1030 x 2000 mm * Berat 2680 kg * Beban keranjang 200 kg * Keranjang konstruksi baja * Dimensi keranjang (P x L x T) 920 x 600 x 1100 mm * Lengan keranjang hidrolik 1500 mm * Kontrol dari keranjang dan lantai Data detail dan foto tambahan akan kami kirimkan atas permintaan. Deskripsi ini bukan penawaran yang mengikat dan dapat mengandung kesalahan. Tidak ada jaminan untuk semua data. Dedpfxsxfnhqe Aayswc Kunjungi juga situs web kami.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2486818, Tahun pembuatan: 2021, kapasitas angkut: 4.999 kg, tinggi angkat: 20.700 mm, jenis bahan bakar: diesel, tinggi konstruksi: 3.090 mm, daya: 98,56 kW (134,00 hp), panjang garpu: 1.200 mm, berat keseluruhan: 16.500 kg, tinggi total: 3.090 mm, panjang total: 6.570 mm, lebar total: 2.500 mm, warna: merah, Perlengkapan: garpu palet, kabin, Data Teknis Tahun Pembuatan: 2021 Mesin: Mesin diesel Transmisi: Transmisi dropbox dengan 2 mode berkendara (maju & mundur) Kapasitas angkat maks.: 4.999 kg Ketinggian angkat maks.: 20,70 m Putaran: 360° Daya nominal: 100 kW - 134 HP Kapasitas silinder: 3,6 l Jumlah silinder: 4 Kemampuan tanjakan maks.: 44% Tipe mesin: Diesel dengan direct injection Kecepatan maksimum: 40 km/jam Berat total: 16.500 kg Dwedpfx Aexlzh Dsayoc Dimensi total (P x L x T): 6,57 m x 2,50 m x 3,09 m Panjang fork: 1,20 m Sepenuhnya berfungsi Terdapat jejak pemakaian umum.

Kondisi: bekas, jarak tempuh: 20.553 km, daya: 260 kW (353,50 hp), pendaftaran pertama: 09/2023, berat keseluruhan: 18.000 kg, jenis bahan bakar: diesel, warna: oranye, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 660 mm, kecepatan spindel (maks.): 80.000 rpm, CNC GE FANUC 16 - M WORKING AREA – GRINDING WHEEL HEAD: Spindle speeds, stepless adjustment -With electric motors: 4,500 – 80,000 rpm -With air turbines: up to 100,000 and 160,000 rpm Grinding wheel head rotation speed, stepless adjustment -With planetary movements: 5 - 300 rpm -With CNC/C axis: 0 – 20 rpm Z-axis feed speed -With Z stroke control, stepless: 0.5 – 14,000 mm/min -Max stroke frequency: 5 Hz Grinding wheel spindle quill -Z stroke (continuous): 170 mm -Z stroke (manual operation): 180 mm -Diameter: 100 mm -Weight compensation: pneumatic Radial grinding wheel increment, NC / U: 5.5 mm Capacity Cylindrical grinding (with Ø 100 mm wheel) -Without intermediate plate: Ø 230 mm -With intermediate plate: Ø 360 mm -Grinding length Z: 125 mm WORKING RANGE: X-axis travel (table slide): 1,200 mm Y-axis travel (grinding wheel head): 660 mm W-axis travel (mobile beam): 635 mm FEED RATE: On X and Y axes (CNC control) -Working feedrate: 0 – 2,000 mm/min -Rapid traverse: 4,000 mm/min On W axis: 800 mm/min POSITION DISPLAY: X and Y axes: 0.0001 mm Z axis: 0.001 mm C axis: 0.001° U axis: 0.0001 mm Origin: programmable Dsdpov Ay E Hsfx Aayjwc TABLE: Usable table surface: 1,320 x 860 mm Max. table load: 800 kg T-slot width: 14 mm Number of T-slots: 7 T-slot spacing: 100 mm TOOL MAGAZINE: No. of magazine positions: 8 Max. wheel diameter: 50 mm Max. total wheel length: 135 mm Taper: HSK 25 Machine equipped with: • Chip tray with paper filter • MSS Multi-Sensoric-System • Fire extinguishing system • Oil mist extractor (de-oiler) • Instruction manuals and CE declaration

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 683 h, Scissor lift Genie GS 4047, 14 m * Ketinggian kerja: 14 m * Ketinggian platform: 12 m * Kapasitas keranjang: 350 kg * Berat: 3221 kg * 683 jam sesuai hitungan meter * Penggerak listrik 24 volt dengan pengisi daya terintegrasi * 2 tingkat kecepatan berkendara * Dimensi (P x L x T): 2600 x 1200 x 2510 mm (tanpa pagar 1920 mm) * Pagar dapat dilipat * Ban tidak meninggalkan bekas * Ukuran ban: 15x5 * Konfigurasi roda: 4x2 * Jarak sumbu roda: 1850 mm Dwodpfx Aoxfnhkeaysc * Keranjang struktur baja * Ukuran keranjang (P x L x T): 2150 (+900) x 980 x 1100 mm * Perpanjangan platform 900 mm * Kontrol dari keranjang dan bawah ---- Deskripsi ini bukan merupakan penawaran yang mengikat dan dapat mengandung kekeliruan. Tidak ada jaminan untuk semua data yang diberikan. Kunjungi juga situs web kami

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2488108, Tahun pembuatan: 2019, kapasitas angkut: 1.600 kg, tinggi angkat: 4.150 mm, pengangkatan bebas: 1.666 mm, pusat beban: 600 mm, jenis bahan bakar: listrik, daya: 3 kW (4,08 hp), kapasitas baterai: 300 Ah, tegangan baterai: 24 V, panjang garpu: 1.150 mm, lebar garpu: 180 mm, ketebalan garpu: 70 mm, radius putar (dalam): 1.493 mm, berat keseluruhan: 1.439 kg, tinggi total: 1.946 mm, panjang total: 2.045 mm, lebar total: 790 mm, warna: merah, Perlengkapan: garpu palet, Data Teknis - Tahun pembuatan: 2019 - Penggerak: Baterai - Pengoperasian: Walkie (dikendalikan berjalan) - Kapasitas angkat: 1600 kg - Kapasitas angkat lengan penopang: 2000 kg - Ketinggian angkat: 4150 mm - Tinggi tiang terangkat: 5056 mm - Titik berat beban: 600 mm - Berat: 1439 kg - Ukuran garpu (P x L x T): 1,15 m x 0,18 m x 0,07 m - Ukuran keseluruhan (P x L x T): 2,05 m x 0,79 m x 1,95 m - Kecepatan berkendara maks.: 0,6 - 6,0 km/jam - Kecepatan angkat maks. dengan/tanpa beban: 0,17 m/dtk / 0,33 m/dtk - Kemampuan tanjak maks. dengan/tanpa beban: 7% / 12% Berfungsi penuh, terdapat bekas pemakaian umum Dwsdpfx Aoxlcc Aeayjc

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2488118, Tahun pembuatan: 2019, kapasitas angkut: 1.600 kg, tinggi angkat: 4.150 mm, pengangkatan bebas: 1.666 mm, pusat beban: 600 mm, jenis bahan bakar: listrik, daya: 3 kW (4,08 hp), kapasitas baterai: 300 Ah, tegangan baterai: 24 V, panjang garpu: 1.150 mm, lebar garpu: 180 mm, ketebalan garpu: 70 mm, radius putar (dalam): 1.493 mm, berat keseluruhan: 1.439 kg, tinggi total: 1.946 mm, panjang total: 2.045 mm, lebar total: 790 mm, warna: merah, Perlengkapan: garpu palet, Data Teknis - Tahun produksi: 2019 - Penggerak: Baterai - Pengoperasian: Berjalan - Kapasitas angkat: 1600 kg - Kapasitas angkat lengan pendukung: 2000 kg - Ketinggian angkat: 4150 mm - Tinggi tiang angkat saat diperpanjang: 5056 mm - Titik berat beban: 600 mm - Berat: 1439 kg - Ukuran garpu (P x L x T): 1,15 m x 0,18 m x 0,07 m - Dimensi keseluruhan (P x L x T): 2,05 m x 0,79 m x 1,95 m - Kecepatan maks. berkendara: 0,6 - 6,0 km/jam - Kecepatan maks. angkat dengan/tanpa beban: 0,17 m/dtk / 0,33 m/dtk Dwedpfxoxlccvj Aayec - Kemampuan tanjakan maks. dengan/tanpa beban: 7% / 12% Fungsi penuh, terdapat tanda-tanda pemakaian umum

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2488028, Tahun pembuatan: 2019, kapasitas angkut: 1.200 kg, tinggi angkat: 3.300 mm, pusat beban: 600 mm, jenis bahan bakar: listrik, daya: 1,5 kW (2,04 hp), kapasitas baterai: 225 Ah, tegangan baterai: 24 V, panjang garpu: 1.150 mm, lebar garpu: 180 mm, ketebalan garpu: 70 mm, jarak ke tanah: 22 mm, radius putar (dalam): 1.393 mm, berat keseluruhan: 929 kg, tinggi total: 2.136 mm, panjang total: 1.910 mm, lebar total: 770 mm, warna: merah, Perlengkapan: garpu palet, Data Teknis - Tahun pembuatan: 2019 - Penggerak: Baterai - Pengoperasian: Berjalan - Kapasitas angkat: 1200 kg - Kapasitas pengangkatan lengan penyangga: 1600 kg - Ketinggian angkat: 3300 mm - Tinggi tiang saat ditarik keluar: 3720 mm - Ketinggian dudukan: 150 mm - Titik berat beban: 600 mm Dwodpsxlbgtofx Aaysc - Berat: 929 kg - Ukuran garpu (P x L x T): 1,15 m x 0,18 m x 0,07 m - Dimensi keseluruhan (P x L x T): 1,91 m x 0,77 m x 2,14 m - Kecepatan berkendara: 6,0 km/jam - Daya tanjak maksimum dengan/tanpa beban: 9% / 12% - Kecepatan angkat dengan/tanpa beban: 0,12 m/dtk / 0,27 m/dtk - Berfungsi penuh, terdapat bekas pemakaian umum