Beli Pretzel Oven bekas (1.340)

Kondisi: sangat baik (bekas), Heraeus Model: VT 6025 Heraeus Vacutherm Vacuum Drying Oven Rjdporknagsfx Abuobt Specification: Jacket Heating VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating type: Jacket heater without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Heraeus Model: VT 6025 Heraeus Vacutherm Vacuum Drying Oven Specification: Jacket Heating VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating type: Jacket heater without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data!) For further questions, feel free to contact us by phone. Rbedpfjrm Rihjx Abuot

Kondisi: sangat baik (bekas), Here we offer you a chamber circulation oven. Usable chamber dimensions: Height 900 mm / Width 600 mm / Depth 600 mm Capacity: 324 liters External dimensions: Height 1775 mm / Width 900 mm / Depth 953 mm Door: 1 leaf Electrical connection: 3x400 V, 50 Hz, 13 kVA Rjdpfeifkiijx Abusbt Heating power: 12 kW Nominal temperature: 300°C Weight: 400 kg Model: KU 300/09-06-06/2 K1051071 Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we would be happy to answer them by phone.

Kondisi: bekas, FlowCook sepenuhnya terbuat dari baja tahan karat cocok untuk pemanasan dengan oli termo (300 kW) panjang sabuk ±13.000 mm lebar sabuk ±600 mm sabuk keluaran sistem pencucian sabuk alat pengangkat elektrik untuk penutup Rbsdpfx Abex Ir Aaeust tekanan uap: 4–8 bar dimensi keseluruhan (P x L x T): ±15.000 x 2.200 x 3.000 mm

Kondisi: siap digunakan (bekas), kapasitas angkut: 550 kg, daya nominal: 69 kW (93,81 hp), Hindenlang TPEVA - 550 - Oven Induksi Jenis: Tungku Induksi Suhu maksimum: 850° Kapasitas: 900 x 750 mm x 550 kg Rbodpfx Absxpkhnsust Tegangan: 400 V / 100 A

Kondisi: siap digunakan (bekas), daya nominal: 69 kW (93,81 hp), Hindenlang TPEVA 550 - Oven Induksi Jenis: Tungku Induksi Suhu maksimum: 850° Rodpfxsx Imk Ej Abusbt Kapasitas: 750 x 900 mm x 550 kg Tegangan: 400 V / 100 A

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Kammer innen 2000 x 1250 x 1250 mm Innenvolumen 2344 Liter Bis zu 400 °C (Leistung 33 kW) Rbsdpfx Aouqkwfjbuot Vorheizen / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturbearbeitung Abgedeckte Führungsbahnen (DGP) für hohe Langzeitpräzision Direktantrieb vom Motor zur Hauptspindel für laufruhigen Betrieb Ölumlaufschmiereinheit mit Filterung zur Schmierung des Präzisionshauptspindellagers Kombinierte Steuereinheit für wirtschaftlich vorteilhafte Programmierung und Maschinenbetrieb sowie optimalen Zugang zum Arbeitsbereich Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg

Kondisi: sangat baik (bekas), GEA FlowCook 8000/600. Panjang pemasakan 8 meter, lebar 600 mm. Kondisi sangat baik, sangat jarang digunakan. Pemanas listrik, daya 283 kW. Rodpfx Asx Ili Hebusbt

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tungku putar bekas dengan press hardening mandrel Merek: Aichelin dan press hardening mandrel MAP DHM 1-350 S / tahun pembuatan: 2004 Tipe: Tungku putar Aichelin RDGs 270 Kontrol: Siemens S7-300/317-2 PN/DP Rsdpfx Abow Rrxfousbt Tahun pembuatan: 2012 Suhu maks.: 950 °C GAS

Tahun pembuatan: 1991, Kondisi: bekas, Fungsionalitas: belum diuji, Furnace batch lepas pasang berbahan bakar gas alam dengan rangka untuk proses pemanasan industri Dimensi troli furnace: Panjang: 1.800 mm Lebar: 1.000 mm Tinggi: 1.150 mm Suhu maksimum: 1.300 °C Isolasi dari blok serat keramik tahan api 1 pintu ayun 6 burner tipe JET Kapasitas panas: 240.000 kcal/h Kontrol otomatis dengan regulator Pixsys ATR313 + termostat pengaman Pembuangan nyala balik 1 penukar panas stainless steel Panduan pengoperasian dan perawatan Rsdsxvtatspfx Abuebt Mesin dijual dalam kondisi apa adanya; data teknis harus diverifikasi.

Tahun pembuatan: 1999, Kondisi: bekas, Fungsionalitas: belum diuji, Furnace batch lepas pasang berbahan bakar gas alam dengan rangka untuk proses pemanasan industri Dimensi troli furnace: Panjang: 1.800 mm Lebar: 1.000 mm Tinggi: 1.150 mm Rjdpexfi Ulefx Abuobt Suhu maksimum: 1.300 °C Isolasi dari blok serat keramik tahan api 1 pintu ayun 6 burner tipe JET Kapasitas panas: 240.000 kcal/h Kontrol otomatis dengan regulator Pixsys ATR313 + termostat pengaman Pembuangan nyala balik 1 penukar panas stainless steel Panduan pengoperasian dan perawatan Mesin dijual dalam kondisi apa adanya; data teknis harus diverifikasi.

Tahun pembuatan: 2013, Kondisi: baru, Wood-fired oven with direct firing Baking surface: 1.0 x 0.7 x 0.25 m (L x W x H) 8 cm fireclay lining with integrated ash drop chute Baking chamber door folds downwards Rsdpfx Aeygm Uebuobt Available with fully automatic pellet firing upon request

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 200 h, France Etuves XXL08 Oven Industri Rbodox Rrrtspfx Abuet Volume ruang: 8.000 liter Stabilitas suhu: ±0,2°C Suhu maksimum: 300°C Dimensi internal (lebar x kedalaman x tinggi): 2.000 x 2.000 x 2.000 mm Dimensi eksternal (lebar x kedalaman x tinggi): 2.559 x 2.578 x 2.665 mm Tegangan: 50Hz, 400V 3 fase 63A Daya pemanasan standar pada 200°C: 36 kW Jumlah pintu: 2 Debit motor-turbin: 6.000 m³/jam Berat: 1.300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm Redpjvz Hq Tefx Abuebt - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. Redpfx Abjvz Hq Hjusbt A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm Rbjdpovz Hqysfx Abujt - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 Rjdjvz Hqtopfx Abuebt The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h Rsdpfx Aevz Hqmjbusbt - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm Rsdpjvz Hqgsfx Abusbt - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Redovz Hhxjpfx Abuebt Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Tahun pembuatan: 2016, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, dalam proses overhaule, waktu pengiriman akhir Januari 2026, garansi 12 bulan - Suhu maksimum 200°C; suhu dapat ditingkatkan hingga 250°C sesuai permintaan - Dimensi dalam: L 1000 x D 1000 x T 1500 mm Rbodpfjvk Navex Abust - Dimensi luar: L 1765 x D 1425 x T 2300 mm - dengan controller Jumo Dicon Touch - Rel masukan untuk pemuatan oven - Daya pemanas 36 KW - Berat sendiri: 780 kg - Konektor knalpot; kipas buang dan katup elektrik dapat dipasangkan sesuai permintaan - Troli pemuatan sesuai permintaan (gambar) - Dokumentasi, deklarasi CE Pemasangan dan commissioning dapat kami tawarkan sesuai permintaan. Kunjungan dapat dilakukan di gudang kami dengan perjanjian terlebih dahulu. Oven, oven industri, oven pengeringan, oven pemanasan, oven temper, oven kamar, oven hardening, pengering sirkulasi udara, oven proses, kabinet pemanasan, oven pembakaran, pengering sirkulasi.

Kondisi: baru, Tahun pembuatan: 2026, Recirculation chamber oven, electric, new device, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Control system: Eurotherm Nanodac (controller / recorder with color touch display) - 2 recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE Rsdpfov Hg Eusx Abujbt - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in an empty oven - Documentation, CE declaration of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but only covered with stainless steel sheeting. This allows free access with all track gauges. Alternatively, the floor can also be offered insulated (with access rails to be defined by the customer). We offer new and used industrial ovens, which we also modify and upgrade according to customer requirements. Oven, ovens, drying oven, industrial oven, drying cabinet, heat oven, heating cabinet, recirculation oven, chamber oven, warming oven, chamber recirculation oven, tempering oven, heat treatment oven, stress relieving oven.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Direkondisi ulang, barang stok gudang, garansi 12 bulan, bukan oven pelarut! – Suhu maksimum 250 °C – Total ruang uap 20,5 m³ – Ukuran kerja (P x L x T) 2300 x 2750 x 2200 mm – Kontrol: Jumo Imago 500 – Daya pemanas: 36 kW – Muatan maksimum troli oven: 6000 kg, penggerak listrik – Katup udara masuk dan keluar elektrik Belimo – Kipas pembuangan dikontrol oleh inverter frekuensi – Ukuran instalasi (P x L x T): 3000 x 3000 x 3125 mm + rel di depan oven – Berat sendiri sekitar 3500 kg – Lemari kontrol berdiri mandiri – Dokumentasi Rodpfx Abjttbf Uouebt Dapat dilihat di gudang kami dengan janji temu. Oven gerbong, oven, oven industri, oven sirkulasi udara, oven sirkulasi kamar, oven anil, oven pemanas, oven pengering, oven temper, oven kamar, lemari pengering.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, 12 months warranty, in stock, brand-new device - Model on casters - Maximum temperature: 300 °C - Oven chamber volume: 1050 liters - External dimensions: 1470 x 970 x 1920 mm (W x D x H) - Oven chamber dimensions: 1200 x 670 x 1400 mm (W x D x H) - Controller B510 (5 programs with 4 steps each), also available with C550 (10 programs with 20 segments each) - Horizontal, forced air circulation ensures temperature uniformity according to DIN 17052-1 better than +/- 5 °C in the empty usable space (with exhaust flap closed) - Permissible batch weight: 250 kg with evenly distributed load - Maximum load per wire shelf: 30 kg (evenly distributed) - Reinforced floors and rails for 80 kg distributed load available on request Rbjdpfxjiqkr Ij Abuet - Wire shelves included: 4 pcs - Maximum number of wire shelves: 14 pcs, available at short notice - Connected load: max. 9.3 kW - Fan capacity: approx. 500 m³/h - Connection: 380-415V 3/N/PE 50 Hz - Net weight: 450 kg - Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg The oven is not suitable for use with solvent-based materials or for heating food, animals, wood, grain, etc. Oven, ovens, industrial oven, drying cabinet, heat oven, laboratory oven, drying oven, tempering oven, test chamber

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Garansi 12 bulan -Suhu maks.: 250°C -Dimensi dalam: L x P x T 1600 x 1200 x 1700 mm -Kapasitas: 3.264 liter -Dengan rel masuk -Jumo Dicon touch -Dilengkapi kipas buang -Berat sendiri: 1850 kg -Kelas IP: 20 -Daya: 29,5 kW Redpfx Abswktiyeujbt -Dokumentasi Kami dengan senang hati menawarkan pemasangan dan commissioning. Peninjauan dapat dilakukan di gudang kami dengan perjanjian. Kami menyediakan oven industri baru dan bekas. Silakan hubungi kami! oven, oven pengering, oven pembakaran, oven pemanas, lemari pemanas, oven industri, oven temper, oven pemanasan, oven tempering, lemari pengering, oven kamar, oven curing, lemari pengering sirkulasi, oven sirkulasi, oven pelarut, oven pengering cat