Beli Primus bekas (61)

Kondisi: sangat baik (bekas), 1 Predexpfx Uspfx Ab Ijd

Kondisi: sangat baik (bekas), Primus Engineering Type: DST 350 Psdpfxort U Nuo Ab Ierd This test system is designed for conducting IP protection class tests "Dust" according to standards such as DIN 40050 Part 9 and DIN EN 60529. The test system is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI - Control panel with display and buttons - Manual regulators - Pre-programmed test cycles - Integrated vacuum circuit with flow measurement Technical data: - Total electrical power: Max. 5 kW - Connection voltage: 400V/50Hz 3-N/PE (16A EEC socket) - Dimensions: width approx. 920 mm, depth approx. 710 mm, height approx. 1770 mm - Test chamber dimensions: width approx. 700 mm, depth approx. 650 mm, height approx. 770 mm - Chamber volume: approx. 350 l - Weight: approx. 200 kg - Vacuum: 0 to -100 mbar - Suction air flow: 0 up to approx. 5 l/min - Operating climate: Temperature: +12 °C to +30 °C, Humidity: 25% rel. to 75% rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: - Dust-protected IP5X and IP5KX - Dust-tight IP6X and IP6KX - with and without vacuum Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Primus dalam kondisi terbaik. Dapat dilihat saat tersambung listrik. Data teknis: Jarak antar senter: 450 mm Pjdpjxzi I Djfx Ab Ijrd Tinggi senter: 120 mm Lubang spindle: 23 mm Kecepatan putar: 30 – 3000 rpm Tailstock: MK 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1550 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments Predpfx Absu Aftgs Ied >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: siap digunakan (bekas), en-001 Prsdpjxw R N Ujfx Ab Ied

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar film: 422 mm, nomor mesin/kendaraan: 860, RINCIAN TEKNIS Prodpfx Asxruc Ijb Iod Jumlah punch: 3 Lebar film: 422 mm Kedalaman maksimum: 110 mm Alat: alat 4 bagian (245 x 175 mm) RINCIAN MESIN Data listrik Tegangan utama: 230/400 V Frekuensi: 50 Hz Arus nominal: 25 A Daya nominal: 16 kW PERLENGKAPAN Thermoforming untuk subfilm keras Rol untuk limbah plastik Mixer gas

Kondisi: sangat baik (bekas), Parallel lathe WEILER Typ PRIMUS Zwischen Spitzen: 400 mm Max. Drehdurchmesser über Bett: 250 mm Max. Drehdurchmesser über Planschlitten: 130 mm Spindeldurchlass: 24 mm Multifix Schnellwechselrevolver Typ A Dreibackenfutter Ø 155 mm Gewindeschneiden: Metrisch + Whitworth Reitstock MK2 HEIDENHAIN Digitalanzeige ND522 Automatische Vorschübe auf 2 Achsen Neues Schaltschrank Lieferumfang: 1 Vierbackenfutter Ø 155 mm, 4 Werkzeughalter, 1 Bohrfutter Predpfx Aboxnp I Ds Ied Anschluss: 380 V Abmessungen (L x B x H): 1300 x 900 x 1900 mm Gewicht: ca. 500 kg Maschine in SEHR GUTEM ZUSTAND

Tahun pembuatan: 1986, Kondisi: bekas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Prsdpfxsn Ard Ds Ab Ijd

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 Predsvtp Edopfx Ab Ied >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Prodpfsvivmyex Ab Iod Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Wittmann_PRIMUS_14_steuerung Predpfx Ajxy I Hiob Isd

Tahun pembuatan: 2005, Kondisi: bekas, hu-001 Podpfxeu T N D Uj Ab Iord

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe in Excellent Original Condition!!! Predpfx Abjwkh Abo Ied Technical Data: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> New collet attachment, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: This offer is for a Weiler Primus GS lead and feed screw lathe in excellent original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in top condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Pedportd Uwefx Ab Ierd Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Tahun pembuatan: 2018, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Temperatur control unit plasma plasTemp Primus 90 Stock No.: 503644 Machine/Device Type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters Podpfxoxt Rdds Ab Iord - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW with a temperature difference between mold inlet and cooling water of 80 K, pressure differential in the cooling water circuit min. 3 bar - Pump: bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC • Digital display for set and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic signal for alarms • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop mode (suction mode) • Suction for mold change • Manual filling • Dirt filter • Device mounted on rubberized castors • Connections: Mold hose nozzle G 1/2" (14 mm), cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Kondisi: sangat baik (bekas), WEILER PRIMUS Tipe MD-G - Ketinggian senter: 125 mm - Jarak antara senter: 400 mm - Rentang kecepatan putar: 40–3000 rpm - Lubang spindle: 24 mm - Pelindung chuck elektrik - Multifix dengan sisipan - Tailstock dengan pinol bor - Chuck empat rahang - Lampu kerja - Pembatas ranjang - Dokumentasi Dimensi: P x L x T: 1,3 x 0,8 x 1,6 meter / Berat: 450 kg Prsdpfexw H Dbjx Ab Ijd Kesalahan dan kekeliruan informasi dapat terjadi.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Steuerung: WITTMANN CNC8 mit Not-Aus-Sperre, ohne Teachbox Prsdjxy I Dnspfx Ab Iod

Kondisi: baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 400 mm, diameter roda gerinda: 225 mm, lebar roda gerinda: 25 mm, 1 used G&H SURFACE GRINDING MACHINE Manufacturer: Geibel & Hotz Model: FS 40 Primus SA Year of manufacture: 1992 Grinding area: 400 x 200 x 300 mm Grinding wheel: 225 x 25 x 51 mm ACCESSORIES: - 1 electromagnetic chuck 300 x 150 mm - 1 grinding wheel with mounting - 1 wet grinding attachment Prsdpfewz N N Rsx Ab Ied

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube Predpfxovkfhpo Ab Ied • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Tahun pembuatan: 2018, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, en-plasma plasTemp Primus 90 temperature control unit Stock no.: 503643 Machine/Equipment Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW (via two stainless steel tubular heaters made from highly corrosion-resistant Incolloy) - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC • Digital display of set and actual flow temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault message • Acoustic alarm indicator Psdpfxjxt Rc Hj Ab Iord • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak stop function (suction mode) • Draining during mold change • Manual filling option • Dirt filter • Device mounted on rubberized castors • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the machine: Prjdpfx Abow Idllo Iod Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Tahun pembuatan: 2018, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Temperiergerät plasma plasTemp Primus 90 Stock no.: 503642 Machine type / Device type: Temperature control unit Manufacturer: plasma Type: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 litres - Heating capacity: 9.0 kW - via two stainless steel immersion heaters - made from highly corrosion-resistant Incolloy Pedpext Rafefx Ab Isrd - Cooling capacity: 70 kW at a temperature difference between tool supply and cooling water of 80 K - Pressure differential in cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW Features: • Microprocessor controller, self-optimizing SBC • Digital display of setpoint and actual value for supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leakage monitoring • Leak stop operation (suction mode) • Suction during tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73 m, W=0.27 m, H=0.58 m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Tahun pembuatan: 2015, Kondisi: baik (bekas), Perangkat tempering plasma plasTemp Primus 160 No. gudang: 503637 Jenis mesin/perangkat: Perangkat tempering Produsen: plasma Tipe: plasTemp Primus 160 Prjdpfxext N Hws Ab Ied Tahun pembuatan: 2015 Compact K-160-9-24 Suhu operasi maks.: 160° Daya pemanas: 9 kW Media sirkulasi: air

Tahun pembuatan: 2015, Kondisi: baik (bekas), Perangkat Tempering plasma plasTemp Primus 160 No. Gudang: 503636 Jenis Mesin/Perangkat: Perangkat tempering Produsen: plasma Tipe: plasTemp Primus 160 Tahun Pembuatan: 2015 Compact K-160-9-24 Pjdpfx Abext N E To Ijrd Suhu operasi maks.: 160°C Daya pemanas: 9 kW Media sirkulasi: air

Tahun pembuatan: 2015, Kondisi: baik (bekas), Perangkat pengatur suhu plasma plasTemp Primus 160 No. gudang: 503634 Tipe mesin/perangkat: Perangkat pengatur suhu Produsen: plasma Tipe: plasTemp Primus 160 Tahun pembuatan: 2015 Podpext N D Nefx Ab Isrd Compact K-160-9-24 Suhu operasi maks.: 160° Daya pemanas: 9 kW Media sirkulasi: air