Beli Rehm Invertig 230 Gw bekas (32)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 30 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 282974, masa garansi: 6 bulan, de Prjdpfsxuvb Dex Ab Ied

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Both a Rehm Invertig Pro 350 AC/DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. Pedpoxddamofx Ab Ijrd 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3-350A Output voltage U₂ (at max current): approx. 24V No-load voltage U₀: approx. 91V Duty cycle: 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S Insulation class: S Adjustment range: 3-350A in TIG for this AC/DC version Duty cycle: 100% at 40°C, 350A in TIG, 100% duty cycle Input fuse: 32A at 3x400V for 350 AC/DC version Dimensions (LxWxH): 520mm x 360mm x 460mm Weight: 29.5kg for the AC/DC version 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3-450A Output voltage U₂ at max current: approx. 28V No-load voltage U₀: approx. 91V Duty cycle: 100% at 450A TIG; lower for electrode welding (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100%: 450A (TIG) at 40°C Electrode welding (MMA) current: approx. 360A at 100% duty cycle for electrode operation on the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions (LxWxH): 520mm x 360mm x 460mm Weight: approx. 28kg On-site inspection is possible.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, masa garansi: 3 bulan, jenis pendinginan: air, arus pengelasan (maks.): 260 A, For sale: Rehm Invertig 260 ACDC 260 AMP 400 Volt ACDC 2/4-stroke High-frequency start Bi Level Psdow I Rm Aopfx Ab Ierd Current downslope Post-flow gas Balance control Suitable for welding steel, stainless steel, and aluminium Completely overhauled and tested Includes TIG welding torch, ground cable, gas hose, and 3-month warranty. Test welding is available. A video of the machine in operation can be provided. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per transport. All our machines have been serviced and are 100% ready for operation, unless otherwise stated. The pictures above show the actual machine offered. We can also offer you other machine types, such as: Used, new, MIG, MAG, CO2, TIG, pulse, AC/DC, plasma, water-cooled, electrode welders We supply the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You will always do business directly with Cjays Lastechniek and never with third parties.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 127814, jenis perlindungan (kode IP): IP23, Perlengkapan: Pelat tipe tersedia, The machine on offer is a used Rehm Invertig 260 AC/DC. The unit is in excellent technical condition and fully operational. However, there are some cosmetic signs of use. All switches and the digital display are functional, and the machine welds flawlessly. The Invertig 260 AC/DC is ready for welding and available for inspection in our warehouse. Test welding is possible at any time; however, we recommend arranging an appointment in advance. With the Invertig 260 AC/DC, you can weld using both TIG and electrode processes. The machine combines professional welding performance with user-friendly operation. The digital display allows individual adjustment of welding parameters. The machine is pre-programmed with 3 languages (German, English, and French). The Rehm Invertig 260 AC/DC offers a welding current range from 5 to 260 A with a high duty cycle. For detailed welding current ranges and duty cycles for TIG or electrode welding, please refer to the machine’s nameplate. Optimal weld formation is achieved by selectable up-slope/down-slope time, pre-gas and post-gas flow time, and adjustable start/ending crater current. A narrower weld bead is possible with DC pulsing up to 500 Hz. The last device settings are automatically saved via the digital display. Prjdpfjv H Afwox Ab Iod Included in the scope of delivery is a used, water-cooled 8m TIG torch TIGZONE CS310A.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, As a machinery dealer in Offenburg, we offer premium welding equipment from the manufacturer Rehm. Many units are available for immediate delivery from stock. We are also happy to provide advice regarding your individual requirements and specifications. Feel free to contact us. Technical Data Model: 280 AC/DC Adjustment Range TIG [A]: 3–280 Electrode (BOOSTER) [A]: 3–280 Duty Cycle (DC) at max. current (10 min.) TIG [%]: 100 Electrode (Booster) [%]: 60 Welding current at 100% DC at 40°C TIG [A]: 280 Electrode (Booster) [A]: 260 Fuse protection (slow-blow) [A]: 16 Torch cooling: Water Protection class: IP 23 Power factor [cos phi]: 0.96 Power consumption at max. current [kVA]: 11.9 Supply voltage [V]: 3 x 400 Mains frequency [Hz]: 50 Control socket [pins]: 12 Welding cable connector [mm]: 13 Weight [kg]: 27 Dimensions [mm]: 520 x 360 x 460 Available accessories: - Hand torch - Ground cable Podpfxow Eil To Ab Iord - Pressure regulator Available immediately. Collection in person possible. Forklift on site. Shipping also available.

Tahun pembuatan: 1998, Kondisi: bekas, en-GB: Technical details: Temperature: 200-210 °C Conveyor speed: 1000 mm/min Max. workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: approx. 2.0 t Psdpfeu Rnd Dex Ab Ijrd Convection reflow soldering system for PCBs Soldering system for printed circuit boards (e.g. SMD type and/or hybrid design) and curing of SMD adhesives Soldering system operates with the following functions --> infeed - preheat - soldering - cooling - outfeed. - with software functions - can be integrated into a production line Further technical specifications: - Protective gas with nitrogen 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with loading head and outfeed conveyor for holding, e.g. PCBs - Machine is CE98 certified System suitable as a source of spare parts or for conversion/extension. Sale as is. Priced to sell. fr-FR: Détails techniques : Température : 200-210 °C Vitesse de passage : 1000 mm/min Longueur maximale de la pièce : 200 mm Puissance totale requise : 50 kW Poids de la machine env. : env. 2,0 t Installation de refusion à convection pour circuits imprimés Installation de soudure pour cartes électroniques (par ex. type CMS et/ou montage mixte) et séchage des colles CMS L'installation de soudure fonctionne avec les étapes --> entrée - préchauffage - soudure - refroidissement - sortie. - avec fonctions logicielles - peut être intégrée dans une ligne de production Autres caractéristiques techniques : - Gaz de protection à l'azote 30 m³/h ; surpression 6 - 10 bar - Besoin en eau : 20 litres/min ; surpression 2 - 5 bar - Débit d'air d'extraction : 1000 m³/h - Puissance électrique de fonctionnement : 12 kW - Encombrement : L : 6500 + station de chargement 2000 x l : 1400 x H : 2100 mm Équipements supplémentaires inclus : - Unité d'empilage automatique LSB 03 avec tête de chargement et convoyeur de sortie pour recevoir, par ex., les circuits imprimés - Machine certifiée CE98 Installation adaptée comme donneuse de pièces détachées ou pour transformation/extension. Vente en l'état. Prix ferme. pl-PL: Szczegóły techniczne: Temperatura: 200-210 °C Prędkość przelotu: 1000 mm/min Maks. długość detalu: 200 mm Całkowite zapotrzebowanie na moc: 50 kW Waga maszyny ok.: ok. 2,0 t Konwekcyjna linia do lutowania rozpływowego do płytek drukowanych Linia do lutowania płytek PCB (np. typ SMD i/lub montaż mieszany) oraz suszenia klejów SMD Linia działa w trybach --> załadunek - podgrzewanie - lutowanie - chłodzenie - wyładunek. - z funkcjami programowymi - może być zintegrowana z linią produkcyjną Inne dane techniczne: - Gaz osłonowy azotem 30 m³/h; nadciśnienie 6 - 10 bar - Zapotrzebowanie na wodę: 20 l/min; nadciśnienie 2 - 5 bar - Wydajność odciągu powietrza 1000 m³/h - Moc robocza elektryczna: 12 kW - Wymiary zabudowy: Dł:6500 + stacja załadunkowa 2000 x Szer:1400 x Wys:2100 mm Wyposażenie dodatkowe w zestawie: - Automatyczny układ sztaplowania LSB 03 z głowicą załadowczą i taśmociągiem wyładowczym na np. płytki PCB - Maszyna z certyfikatem CE98 Urządzenie nadaje się jako dawca części zamiennych lub do przeróbki/rozbudowy. Sprzedaż w obecnym stanie. Cena do negocjacji.

Kondisi: bekas, Tahun pembuatan: 2021, Cutting capacity on steel up to 50 mm Output at 100% duty cycle 130 A Machine weight approx. 130 kg Space requirement approx. 650 x 400 x 900 mm NEW PRICE: ~6,000 EURO Very good condition Very low usage Equipment: - Torch A151/6 - Ground cable 25 mm² Infinitely variable setting range [A] 25 - 150 Duty cycle at max. current (10 min) at 20°C [%] 60 Podpfx Abjv Da Udo Ijrd Mains connection [V] 3 x 400 V Protection (slow-blow) [A] 35 Protection class IP 23 Max. cutting power [kW] 21 Current/Voltage at 100% duty cycle [A/V] 130/130 Max. power consumption 24.5 Power factor [cos phi] 0.97 Max. high-quality cut with REHM performance torch 40 mm Max. severance cut, manual operation S 235/S355 [mm] 50

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Dijual beberapa oven reflow Rehm dan oven pengering Rehm (pengering cat). Oven-oven dalam kondisi baik, telah dibersihkan, dan sepenuhnya berfungsi. 1 x Rehm VXP nitro 3850 (tahun 2010), tipe 834 (No. Proyek 2680) Lokasi: Buchenstraße 18 - 20 / 93426 Roding = €3.500 nego Pjdpsw Srqqofx Ab Ijrd Selain itu, kami juga menawarkan: Asys TRM 03 (2012) Asys FPS (2010) Siplace S 27 dan Siplace F 5 HM (2006) Exra X6 HSP (2008) (donor spare part) Knodel oven pengering (2015) Nutek Coating Inverter (2014) dan masih banyak lagi. Silakan hubungi kami, kami dengan senang hati akan mengirimkan data dan foto tambahan mengenai peralatan kami.

Kondisi: sangat baik (bekas), Manufacturer: REHM Model: Synergic. PRO 2 450-4 Podpfx Abjv Nrfxs Isrd Machine Condition: Very good used condition ///// Price stated is for 1 piece ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology - Smart Machine Control A unique adjustment concept for step-controlled devices developed by Rehm: The arc length is regulated not only via voltage and welding current measurement, but also by digitally setting the wire feed speed. This enables outstanding welding results and ensures operation is easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures optimal arc ignition properties and high arc stability during welding. Fine adjustments can be made manually via the SDI knob. This allows heat input to be precisely controlled, positively affecting the amount of post-weld rework required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. Thanks to RSC, changes in arc length are compensated more quickly and efficiently. - CCM – Characteristic Curve Memory Device-integrated database of welding parameters with expert knowledge. By selecting the wire type, diameter, and welding current/voltage level, the device synergistically sets pre-configured welding parameters. During operation, actual parameter values are continuously compared with set values, and corrections are made instantly if necessary. - RMI – Rehm Machine Interface The control panel is exceptionally simple and prevents incorrect selections. Straightforward parameter selection simplifies work for the welder and minimizes errors and setup time.

Kondisi: bekas, Tahun pembuatan: 2015, Mesin operasional – telah digunakan setiap hari. Ruang hampa udara tidak digunakan selama 1,5 tahun terakhir karena tidak diperlukan. Penopang tengah hanya dapat diatur secara manual. Lokasi mesin: Uni Eropa. Predpoxlqnyjfx Ab Isd Silakan tanyakan informasi tambahan!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, REHM P 300 W 0,8/1,0 dengan troli profesional Prsdpfx Aoxamgbsb Ied Kondisi: Mesin demonstrasi Ruang lingkup pengiriman: - Abicor Binzel 401, 4m - Kabel massa 5m - Regulator tekanan - Adaptor gulungan keranjang

Kondisi: bekas, Technical details: Power input: 240 A Voltage: 3x400 V Open-circuit voltage: 91 V Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding rectifier (inverter) TIG (steel/stainless steel) and manual electrode welding Direct current TIG = up to 240 A / 19.6 V Manual electrode welding = up to 240 A / 19.6 V Switchable between 2/4-stroke modes, infinitely variable pulse switching Protection class IP 23 Water-cooled with frost protection Shielding gas / solenoid valve Torch head gas-cooled with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters Prodpfxsu U Iixo Ab Isd

Kondisi: bekas, Length 850 mm Height 975 mm Total power requirement 10.5 kW Pjdjvuz Srjpfx Ab Ierd Machine weight approx. 175 kg Space requirement approx. 850 x 450 x 1575 mm Technical Data Adjustment range stepless [A] 10–300 Duty cycle (ED) at max. current (10 min) [%] 80 Welding current at 100% duty cycle [A] 270 No-load voltage [V] 75 Mains connection [V] 3/PE 400 Continuous output at 100% duty cycle [kVA] 12.2 Fuse (slow-blow) [A] 20 Power factor [cos phi] 0.98 Insulation class H Torch cooling water-cooled Protection class IP 23 Wire diameter steel and stainless steel [ø mm] 0.8/1.0 Wire diameter aluminum 1.0/1.2 Sound level according to DIN 45635 [db(A) 1 m] 68 Equipment: - without accessories

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 193568, Offer 24606 Technical Data: - Welding current max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - Separate wire feed unit with intermediate hose package 1 m - 4-roller wire feeder, infinitely variable adjustment - 2-stroke + 4-stroke operation selectable Pedpfx Asvt Twqeb Ierd - Digital volt and ampere display - Spot welding - Interval welding - Water-cooled torch package 4 m - Ground cable - Pressure regulator - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Kondisi: bekas, REHM RMP 400 Hybrid Pulse Shielded Gas Welding Machine (REHM-Mega-Pulse) Pulse welding machine with inverter welding power source Serial no.: Year of manufacture: 1998 Output: 400 amps @ 60% duty cycle 320 amps @ 100% duty cycle Infinitely variable adjustment range Power supply: 400 volt, 50 Hz, 32 amp plug - Separate 4-roll wire feeder with connection hose package, meters - Digital display for voltage and current - Pulse welding device with single and double pulse function - 2-stroke and 4-stroke welding modes - 4 meter Binzel hose package with central connector - Water-cooled - Shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Dimensions (L x W x H): 1150 x 510 x 1350 mm Prodpfxswa Uwds Ab Iod Weight: 200 kg In good condition

Kondisi: bekas, Tahun pembuatan: 2005, Kondisi operasional. Predpfjxd Ad Rsx Ab Isd

Kondisi: baru, As a machinery dealer based in Offenburg, we also offer welding machines from REHM. You can find an overview of our available equipment on our website. Should you have any questions, simply give us a call. MIG MAG Welding Machine REHM FOCUS.ARC 300 Pedpfxew Eik Ns Ab Iord Manufacturer: REHM Model: FOCUS.ARC 300 Scope of delivery: - Abicor Binzel 401 hose package 4m - Ground cable 50mm 5m - Pressure regulator - Adapter for basket spools Available immediately. Self-collection preferred. Forklift onsite. Shipping also possible. Subject to errors, changes, and prior sale. Not the right machine for you? Then visit our website.

Kondisi: bekas, Technical details: Power consumption: 240 A Voltage: 3x400 V Open circuit voltage: 91 V Podpfxsu U Ihzj Ab Iord Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding Rectifier (Inverter) TIG (for steel/stainless steel and manual stick welding) Direct current TIG: up to 240 A / 19.6 V Manual arc welding (MMA): up to 240 A / 19.6 V 2-/4-stroke mode, infinitely variable switch to pulse Protection class IP 23 Water-cooled with antifreeze protection Torch head gas-cooled with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 195311, Offer 24601 Technical Data: - Welding current max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse settings + 12 fine settings - 50 to 450 A Psdpjvt Trzefx Ab Iord - Separate wire feed case with 1 m interconnecting hose package - 4-roller wire feed, continuously adjustable - 2-step + 4-step control - Digital volt and ampere display - Spot welding function - Interval welding function - Water-cooled torch package, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Required space: approx. W 750 x D 1100 x H 1600 mm - Weight: approx. 180 kg

Kondisi: bekas, Tahun pembuatan: 2014, Machine in operational condition. Pedpfewlfaysx Ab Ierd Operating hours: 2014–2018 single-shift operation only; 2018–2022 in storage; 2022–2023 operated in three shifts; from 2023 onwards in storage. Please contact us for further information!

Kondisi: baru, As an authorized REHM dealer, we are now able to offer customers in Offenburg and the surrounding area up to 40% government funding towards the purchase of a new MIG/MAG PULS welding unit. Podsw Eikvspfx Ab Iord Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries. REHM MIG/MAG Welding Unit FOCUS.ARC P REDUCES CO2 AND BRINGS GOVERNMENT FUNDING WHO PROVIDES THE FUNDING? The German Federal Office for Economic Affairs and Export Control (BAFA) supports investments aimed at improving the energy efficiency of systems and production processes. WHAT IS FUNDED? Investments that demonstrably save energy and thereby reduce CO2 emissions may be subsidized. For example, if you want to replace step-regulated welding machines with high energy consumption with efficient REHM welding technology, you can benefit from Module 4 funding. Costs for the preparation of the energy-saving concept and the implementation support by an external energy consultant are also eligible. The payback period of the complete measure must be more than two years. HOW MUCH FUNDING IS AVAILABLE? Up to: - 40% of the costs - €900 per ton of CO2 - €10 million BAFA funds large companies up to 30% (max. €500 per ton of CO2 saved) and small and medium-sized enterprises up to 40% (max. €900 per ton of CO2 saved) of the eligible costs. The maximum subsidy per investment project is €10 million. WHO CAN APPLY? Private and municipal companies with a facility or branch in Germany are eligible to apply. The planned measures must be implemented within Germany. A BAFA-accredited energy consultant must be commissioned to prepare the required energy-saving concept. HOW TO APPLY FOR FUNDING? 01. Inventory: Compile a list of all equipment to be replaced and all new equipment to be purchased. 02. Assessment: We capture the necessary data onsite and provide a preliminary estimate of your funding amount. At the same time, we will prepare a quote for the new welding units. 03. Energy Consultant: We process all data for you and pass it on to a cooperating energy consultant—saving you time and costs. 04. Application: After reviewing the data, the energy consultant submits the funding application on your behalf. 05. Processing time: If urgent, we can fast-track your application. Processing time is then reduced to approximately 10 to 15 days. The following REHM MIG/MAG PULS welding units are eligible for BAFA funding: Without wire-feed case: FOCUS.ARC P 250 0.8/1.0 mm FOCUS.ARC P 250 W 0.8/1.0 mm FOCUS.ARC P 300 1.0/1.2 mm FOCUS.ARC P 300 W 1.0/1.2 mm FOCUS.ARC P 350 1.0/1.2 mm FOCUS.ARC P 350 W 1.0/1.2 mm FOCUS.ARC P 400 1.0/1.2 mm FOCUS.ARC P 400 W 1.0/1.2 mm FOCUS.ARC P 450 1.0/1.2 mm FOCUS.ARC P 450 W 1.0/1.2 mm With wire-feed case: FOCUS.ARC P 250 S 0.8/1.0 mm FOCUS.ARC P 250 WS 0.8/1.0 mm FOCUS.ARC P 300 S 1.0/1.2 mm FOCUS.ARC P 300 WS 1.0/1.2 mm FOCUS.ARC P 350 S 1.0/1.2 mm FOCUS.ARC P 350 WS 1.0/1.2 mm FOCUS.ARC P 400 S 1.0/1.2 mm FOCUS.ARC P 400 WS 1.0/1.2 mm FOCUS.ARC P 450 S 1.0/1.2 mm FOCUS.ARC P 450 WS 1.0/1.2 mm Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries.

Tahun pembuatan: 1998, Kondisi: bekas, Temperature: 200-210 °C Conveyor speed: 1000 mm/min Maximum workpiece length: 200 mm Total power requirement: 50 kW Approximate machine weight: 2.0 t Convection reflow soldering system for PCBs Soldering system for printed circuit boards (e.g., SMD type and/or mixed technology) and for curing SMD adhesives. The soldering system operates with the following functions: Infeed – Preheating – Soldering – Cooling – Outfeed. - Equipped with software features Pjdpfxou Rwaue Ab Ijrd - Can be integrated into a production line Additional technical specifications: - Shielding gas with nitrogen: 30 m³/h; 6–10 bar overpressure - Water requirement: 20 liters/min; 2–5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical operating supply: 12 kW - Space requirements: L: 6500 + loading station 2000 × W: 1400 × H: 2100 mm Included additional equipment: - Automatic stacking device LSB 03 with loading head and outfeed conveyor for receiving, e.g., PCBs. - Machine is CE98 certified System suitable as a source for spare parts or for conversion/expansion. Sale as is. Priced to sell.

Tahun pembuatan: 2014, Kondisi: baik (bekas), nomor mesin/kendaraan: 239615, Offer 22673 Technical Data: - Welding current max. 500 A 60% duty cycle - 375 A 100% duty cycle Pjdpfx Asm Udf Nsb Iord - Welding current adjustable in 3 coarse settings + 12 fine settings - 50 to 500 A - Separate wire feed unit with intermediate hose pack 15 m - 4-roller wire feed system, infinitely adjustable - 2-step + 4-step control - Digital volt and ampere display - Spot welding - Intermittent welding - Water-cooled torch package 4 m - Ground cable 10 m - Pressure regulator - Connection 400 V / 50 Hz / 63 A - Required space approx. W 750 x D 1100 x H 1600 mm - Weight approx. 300 kg

Kondisi: bekas, Tahun pembuatan: 2022, Betriebsbereit. 2 Stück verfügbar. Prjdswctn Hopfx Ab Ied Für weitere Informationen bitte anfragen!

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 195312, en-24596-1 Prodpfxovt Tvmo Ab Isd