Beli Samco Unilev 15 bekas (22)

Kondisi: baru, Mesin bekas Tahun pembuatan: 1988 Kondisi: terawat Data teknis: - Panjang meja kerja: 1440 mm - Lebar total dua meja kerja: 710 mm - Penyesuaian kemiringan meja kerja: 0 – 30 derajat - Tekanan kerja: 6 bar - Panjang sabuk amplas: 2170 mm - Lebar sabuk amplas: 150 mm - Kecepatan sabuk amplas: 10 – 20 m/detik - Penyesuaian vertikal unit osilasi: 125 mm Laodoxzl Aqopfx Aahok - Berat: 490 kg - Konsumsi udara: 25 NL/menit - Listrik: 400 V / 2,9 kW Ketersediaan: segera Lokasi penyimpanan: Baden-Württemberg

Kondisi: sangat baik (bekas), Samco Unilev 15 Edge Sander Belt dimensions: 150 x 2170 mm Lasdpfx Ajxd Rl Neahek Two belt speeds Adjustable shoe Table adjustable from 0-30 degrees Adjustable sanding height Pneumatic sanding belt tensioning Sanding belt oscillation Motor power: 3 kW

Kondisi: sangat baik (bekas), Band dimensions: 150 x 2170 mm Two belt rotation speeds Adjustable boot Ljdpfx Aepq R Uasahsak Both upper parts can be adjusted at an angle from 0–30 degrees Adjustable grinding height

Kondisi: bekas, Cleaned, functionally tested, trial run New pneumatic rotary switch New 3/2-way valve Belt oscillation converted New pressure regulators installed Machine adjusted Used, in good condition Manufacturer: Samco Type: Unilev 15 N Machine No.: AM / 030640 Ledpsvwgf Nofx Aahsak Motor: 3 kW Oscillation: pneumatic Veneer edge sanding device Front table approx. 1200 x 220 mm Rear table approx. 1200 x 220 mm Tilting table double-sided Belt tensioning pneumatic Mitre stop Height adjustment unit Extraction connection D 100 mm Required space approx. LxWxH mm: 1300 x 800 x 1800 Weight approx. 450 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sold in as-inspected condition

Kondisi: siap digunakan (bekas), Length of work tables: 144 cm Width of work tables: 71 cm Operating pressure: 6 bar Tilting of work tables: 30 degrees Lajdpfx Aowx H A Ajahek Abrasive belt width: 15 cm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.440 mm, lebar total: 710 mm, tinggi total: 1.300 mm, jenis arus masuk: tiga fasa, SAMCO Unilev150 Double-Sided Edge Sander Specification: • Condition: used • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 x 2150 mm • Two sanding belt speeds • Table size: 22 x 144 cm • Both tables tiltable from 0° to 30° • Motor power: 3.5 / 4.5 HP • Pneumatic belt tensioning and oscillation • Adjustable sanding shoe for veneer sanding on one side and a 'back' support 15x75 cm on the other • Angular sanding attachment with protractor • Extraction port: Ø 140 mm • Weight: approx. 450 kg • Overall dimensions: 144 x 71 x 130 cm (L x W x H) Additional Information: Laodpsvmqypofx Aahek • Very good original technical and visual condition • The attached photos show the actual item for sale • The machine can be connected and inspected on site • The listed auction price does not include VAT

Kondisi: sangat baik (bekas), Here we offer you an Omron SCARA industrial robot. Omron SCARA industrial robot with PB programming box R6Y XGL400 XG series SCARA robot for industrial applications: • Enhanced reliability (no belts in the XG series, no moving electronic parts) • High precision and speed • Minimal maintenance • Easy operation • High rigidity • Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Maximum payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical specifications: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/–0.01 mm R: +/–0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/–140º Y-axis +/–144º Z-axis ----º R-axis +/–360º Lsdpfoh H D Rtsx Aaheak Type: R6Y XGL400150 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Any further questions can be answered by telephone.

Kondisi: bekas, Mesin bor lubang memanjang SAMCO AS 16 - bekas - Motor dapat digerakkan, Perangkat pengeboran dowel ----- Data teknis ----- Ukuran meja kerja: 550 x 285 mm, Lebar pengeboran: 190 mm, Lsdpfx Aew Nv Nxeaheak Kedalaman pengeboran: 120 mm, Kecepatan: 2.840 rpm, Motor: 1,5 kW, Berat: 220 kg

Kondisi: bekas, Data teknis: Dimensi meja kerja: Meja angkat elektrik Pelindung sabuk Penjepit Diameter roda: 195 mm Pipa hisap: 2x120 mm Gerakan horizontal meja Kipas terintegrasi Catu daya: 400 V Daya motor sabuk amplas: Dimensi keseluruhan: Lajdpowxtiiofx Aahek Panjang: 2000 mm Lebar: 4400 mm Tinggi: 1600 mm

Kondisi: bekas, Tahun pembuatan: 1987, Mesin amplas sabuk panjang Produsen: Samco Tipe: EG Tahun pembuatan: 1987 Ljdpfsxdnrgsx Aaheak Panjang pengamplasan: 3.000 mm Termasuk sabuk cadangan 101225

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Punching force: 25 t (250 kN) Pass-through width: 1800 mm (1660 mm usable) Clear opening between uprights max./min.: 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic rail punching machine Hydraulic pressure: 250 bar Punch table area = 1830 x 500 mm Laedpfx Asu Szfuoahsk Punch carriage/plate = 500 x 500 mm; Travel speed = 800 mm/sec; Punch stroke = 63 mm/s, Forward/reverse travel 125/125 mm/sec. Operation via control panel with pressure switch/control lever Equipment: 2x pneumatic feed rollers Ø 120 x 1630 mm, pneumatically operated open/close

Kondisi: siap digunakan (bekas), 6222 SAMCO LONG-BELT SANDER Table length: 2930 mm Lajdpfx Aasu Sr Txjhok Table width: 800 mm Motor power: 4 kW Electric table lowering Voltage: 380 V Belt width: 150 mm Spring-loaded belt tensioning Left/right rotation

Kondisi: belum diuji (bekas), Untuk membentuk ujung-ujung lamela dalam pembuatan penutup lipat Lajdjxuf Rbjpfx Aahsk

Kondisi: baik (bekas), Mesin amplas sabuk dengan leher angsa ganda dan 3 motor, untuk kayu, pekerjaan pertukangan, logam, aluminium, bahan komposit, dan berbagai bahan lainnya Data teknis: Panjang meja mm 3000 Lebar meja mm 800 Penyesuaian vertikal meja mm 850 Motor sabuk 2 kecepatan rpm 1400/2800 - 3/4 Hp Pengangkatan meja otomatis Panjang sabuk amplas mm 8000 Lebar sabuk amplas mm 120 Kedalaman efektif leher angsa mm 600 Tinggi leher angsa mm 200 Laodpfoxivycjx Aahsk Dimensi keseluruhan mm 4300 x 1500 x 1800 h Berat kg 740

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, long-belt sander SAMCO 77, 3.0 m Specification: • Condition: used, after inspection • 2 belt speeds • Electric up/down adjustment • Table dimensions: 80 x 300 cm • Main motor power: 3.5 HP (380V) • Extraction motor: 1.5 kW (380V) • Dedicated belt width: 120 mm • Integrated dust extraction system • Max. working height: 60 cm • Overall dimensions: 445 x 130 x 160 cm (L x W x H) Laedowv Rkfopfx Aahok Additional information: • Good technical condition • The photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Kondisi: sangat baik (bekas), Working range 850 mm 0.12 kW motor Very good condition. Laedpfsr Ha Ufex Aahjk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KK052469, Connection rating 380V 4kW Table size 1070 x 620 mm Lasdpfjiinm Hjx Aahok Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for power feed unit Safety covers for hand routers Spindle diameter 30 mm Aigner fence Extraction port 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Kondisi: hampir baru (bekas), dimensi meja 2900x800 mm Lsdpfexmgf Dox Aahoak lebar sabuk 150 mm penyesuaian meja naik/turun secara elektrik kipas bawaan putaran kanan/kiri

Kondisi: bekas, Used, in good condition. Cleaned, function tested, trial run performed - Oil changed - Spare parts: Feed rollers Manufacturer: Samco Model: Euro-Uno Motor: 2.25 Ah Roller diameter: 120 mm Roller width: 50 mm Number of feed rollers: 4 With stand Infinitely variable Space required approx. 1000 mm x 800 mm x 800 mm Lajdpfxjv D Rhbj Aahsk Location: 97447 Gerolzhofen, loaded free on truck, unpacked Sale in as-inspected condition, without warranty or guarantee.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, SAMCO DG-60 Edge and Disc Sander 2-in-1 Specification: • Manufacturer: SAMCO • Model: DG-60 • Working height: 150 mm • Abrasive belt dimensions: 150 x 1870 mm • Worktable dimensions: 35 x 64 cm • Motor power: 2.2 kW • Mechanical belt tensioning and oscillation • No pneumatic system required • Sanding disc diameter: 600 mm • Table tiltable by ±45° • Dust extraction port diameter: 120 mm • Safety switches and CE markings Laodpfx Aajvgnagjhjk • Weight: approx. 400 kg • Overall dimensions: 110 x 120 x 130 cm (L x W x H) Additional information: • Very good, original technical and visual condition • Photographs show the actual condition of the item offered • Possibility to test the machine on site • The listed price does not include VAT or transport costs

Kondisi: baik (bekas), pneumatic clamps automatic strip feeding Lodpfxsnwnd Aj Aaheak aggregate angle adjustment pneumatic spindle movement strip supports oscillating drill movement adjustment feed stroke adjustment 380V power supply

Kondisi: bekas, Tahun pembuatan: 2006, including 2nd sanding shoe Used, top configuration Manufacturer: SCM Samco Model: EG 2500 Year of manufacture: 2006 Machine No.: AM/28506 Motor: 3.0 / 2.2 kW Sanding length: approx. 2500 mm Sanding width: approx. 1000 mm Belt length: approx. 6800 mm Table size: approx. 2500 mm x 1000 mm Throat (right): approx. 700 mm Throat (left): approx. 700 mm Electric adjustment Upper belt cover Upper sanding pad Belt speeds: 1,400 / 2,800 rpm = 23 m/sec / 46 m/sec Reversible belt run (right-left) Laedpfx Asvwffbsahsk Extraction port Ø 160 mm Space requirement: approx. 3900 mm x 1700 mm x 1500 mm Total connected load: approx. 4.55 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee