Beli Scm 2041 Fs bekas (638)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Three-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data entry via membrane keypad Electronic adjustment of the scoring unit Hodpfjyftzkex Aa Dsnp Automatic parallel fence with adjustment via leadscrew and linear ball guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cuts with extendable fence mm: 3200x3200 Tilting range degrees: 0°/ +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note for used machines: • Technical data and prior sale subject to change and errors excepted. • Prices listed are ex-location – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Kondisi: baru, Equipment: - 5-axis electronic control - Swiveling operator console above table - Electronic scoring unit adjustment - Automatic rip fence with screw-driven adjustment and linear ball bearing guide - On/off switch integrated into crosscut carriage - “Quick Lock” edging frame - Longitudinal fence with “Full Support” LCD displays - Sliding carriage with arched contact surfaces – 10-year warranty! - Telescopic arm with linear ball bearing guide Hnedpfx Aocrnm Noa Dep Technical data: - Main saw blade diameter: 550 mm - Scoring blade diameter: 120 mm - Format cutting capacity with extendable fence: 3200 x 3200 mm - Swivel range: 0° to +46° - Max. cutting height at 90°: 200 mm - Max. cutting height at +45°: 130 mm - Saw blade rotation speed: 2500, 3500, 5000 rpm - Scoring blade rotation speed: 8500 rpm - Extraction port diameter: 120 & 100 mm - Main motor power (50 Hz): 7.0 kW - Scoring unit power (50 Hz): 1.3 kW - Cutting width with rip fence: 1500 mm Including the following OPTIONS: 570335 “Pro-Lock” system for quick clamping of the main saw blade and tool-free riving knife quick adjustment

Kondisi: baru, Saw aggregate tiltable 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilting and lifting Grey cast iron saw unit ensures torsional rigidity and vibration-free operation Easier panel handling thanks to a large crosscut frame with support roller Telescopic fence with 2 professional flip stops Excellent cutting precision — sliding table is guided with high accuracy and smooth movement by a tried-and-tested ball contact system Scoring unit equipped with its own drive, easily adjustable from the outside Saw unit accommodates saw blade diameters up to 400 mm Scoring blade diameter 160 mm 2-position manual saw blade pendulum guard 3-axis controlled Motorized rip fence with electronic positioning Includes: - Position display via encoder - Adjustment via ball screw - Continuously variable setting via switch or automatic positioning system - Incremental adjustment possible - Fence swiveling mechanism below table - Cutting width 1270 mm - Programmed motorized movement and tilting for saw unit UP version: - With swiveling control panel for maximum flexibility X version: - With Compex mitre fence for fast and precise execution of mitre cuts with automatic compensation of the fence position (length compensation) - Outrigger with angle-adjustable telescopic crosscut stop - Optional with angle raster division (Art. No.: 5510403) - Longitudinal fence with 2 LCD displays for the stop position Including options: Hnodpsd Akygsfx Aa Djp - Version with max. sliding table travel 3200 mm - On/off switches for main saw blade and scoring unit motors integrated in the crosscut frame - Crosscut frame with CompeX device - "READY 3 UP" version - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Crosscut frame length: 1200 mm Crosscut frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with rip fence: 1270 mm Max. crosscut width left of the saw blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height at -45°: 60 mm (Main) saw blade diameter: 400 mm Scoring blade diameter: 160 mm

Kondisi: baru, Tilting Spindle Moulder Simple and practical operation thanks to the ergonomic arrangement of the control elements on the front of the machine Digital display for spindle height and tilt position Spindle speed display Right/left rotation of the spindle 8 speeds Spindle diameter: 30 mm Clamping length of spindle: 125 mm Max. tool diameter below table: 240 x 80 mm Extraction port diameter: 2 x 120 mm INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions 57.03.30 Motorized height and angle adjustment of the working unit with digital readouts 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch 57.00.76 Fence with handwheel adjustment Hjdpfxscuwpto Aa Dsnp - Fence with stepless adjustment via easily accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool – Adjustment of the infeed fence to change chip removal – Mechanical digital readouts – Wooden fence jaws and connecting bridges Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note regarding used machines: • Errors in technical specifications and prior sale excepted. • Stated prices are ex-location, loaded onto truck. • The machines have been cleaned and tested for functionality. • All machines are purchased as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. (We will only answer inquiries that include your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Maximum saw blade diameter: 300 mm Main saw motor: 5.5 kW Maximum scoring saw blade diameter: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. — 1 x 2,500 x 500 & 2 x 1,500 x 500 mm Office version for optimizing panel layouts Clamping grippers: 8 pcs Saw carriage height adjustment with THK guides Pressure beam with slotted passages Side aligner Pneumatic quick-change system for saw blade Extraction port diameter: 1 x 120 mm & 1 x 150 mm Setup dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg INVERTER NEW Note – Used Machines: • Technical information may be subject to error and prior sale. • Listed prices are ex-location and include free loading. Hnjdpfohvan Iex Aa Dep • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any claim to warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Kondisi: sangat baik (bekas), Nomor Katalog: 7713 SPESIFIKASI TEKNIS - Lebar maksimum benda kerja: 240mm - Tinggi maksimum benda kerja: 130mm - 6 spindel: 1) Horizontal bawah: 240mm, 7,5kW 2) Vertikal kanan: 130mm, 5,5kW 3) Vertikal kiri: 130mm, 5.5kW 4) Horizontal atas: 240mm, 7,5kW 5) Horizontal atas: 240mm, 5,5kW Spindel 4 dan 5 dapat diatur secara elektrik naik/turun 6) Horizontal bawah: 240mm, 5,5kW - Semua spindel dapat diatur naik/turun, kanan/kiri - Diameter spindel: 40mm *Bagian atas: - 8 rol pengumpan logam bergerigi, termasuk 3 rol ganda - 4 rol penarik halus, karet, termasuk 2 rol ganda *Bagian bawah: - 3 rol penarik halus - 3 penekan samping - Pengaturan kecepatan umpan yang halus melalui inverter - Rol penekan pneumatik - Motor umpan: 7,5kW Hnodpfx Aaszab Eye Dop - Umpan pada rol Kardan - Pengaturan ketebalan serutan elektrik - Motor pengangkat rangka: 0,75kW - Panjang meja pengumpan: 2480mm - Pembukaan/penutupan kabin pneumatik - Pembersihan meja pneumatik - Pelumasan meja sentral - Diameter saluran hisap: 3x120mm, 3x150mm - Dimensi (P/L/T): 5300x1700x1800mm - Berat: 5000kg KEUNGGULAN - Produk Italia - Dilengkapi dengan 6 kepala - Untuk kayu basah dan kering - Pembukaan kabin pneumatik - Pembersihan meja pneumatik - Spindel 4 dan 5 dapat diatur secara elektrik - Mesin serut bekas, kondisi sangat baik Harga netto: 116900 PLN Harga netto: 27833 EUR, tergantung pada nilai tukar 4,2 EUR (Harga dapat berubah sesuai dengan fluktuasi nilai tukar)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, daya: 7 kW (9,52 hp), tegangan masuk: 400 V, ketinggian potong (maks.): 136 mm, lebar pemotongan (maks.): 900 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, berat keseluruhan: 690 kg, Perlengkapan: doser, pelindung bilah gergaji, Mesin pameran; Art. No. 5504933 Hnedpeziwz Usfx Aa Dsp dengan perlengkapan khusus; bingkai pemangkas dengan perangkat CompeX, penunjuk digital untuk pembatas lebar. Holzkraft minimax si 4 - 400 / 32 M A, produsen SCM Group, panjang potong 3200 mm, tinggi potong 136 mm, mata gergaji 400 mm, motor 7,0 KW, scoring dengan motor sendiri, pengaturan ketinggian dan kemiringan unit gergaji bermotor kecepatan putar mata gergaji dapat diatur dalam dua tingkat, sakelar on dan off terintegrasi pada meja dorong, pelindung ayun mata gergaji yang praktis,

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT Hnsdpexy Tmnjfx Aa Djp All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, kondisi sangat baik, jarang digunakan lebar kerja maksimum 230 mm tinggi kerja maksimum 120 mm daya motor spindel: U 5,5 kW L dan R 7,5 kW O 5,5 kW Hodszlk U Hopfx Aa Djnp dilengkapi kepala serut Tersa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Машината е в перфектно работно състояние. Възможна е демонстрация на място или на живо чрез видео. Hnedpfev T U Rrjx Aa Dop

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: AH00001546, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 6.898 h, tegangan masuk: 400 V, arus masuk: 55 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, jenis penyesuaian ketinggian: listrik, kecepatan pemakanan sumbu X: 22 m/menit, jenis aktuasi: listrik, panjang total: 7.000 mm, berat keseluruhan: 3.121 kg, tahun perombakan terakhir: 2025, Perlengkapan: Penandaan CE, dokumentasi / manual, Perusahaan INTERIOR 46 DESIGN Hnodpfjzki Dkox Aa Dop Eood – Kota Ruse menjual: Mesin pelapis tepi lurus SCM - Stefani MD – produksi tahun 2019. Mesin ini dibeli baru dan telah digunakan selama 5 tahun untuk memproduksi dapur sesuai pesanan. Kondisi teknis sangat baik. Telah dirawat dan diservis sepenuhnya oleh SCM Bulgaria. Mesin ini berada di ruang pamer SCM – Varna. Tersedia opsi untuk pemeriksaan dan pengujian di lokasi.

Tahun pembuatan: 2010, jam operasional: 540 h, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 3.060 mm, jarak lintasan sumbu Y: 1.735 mm, jarak gerak sumbu Z: 250 mm, berat keseluruhan: 2.000 kg, jumlah sumbu: 4, This 4-axis wood boring machine SCM TECH Z2-27-C was manufactured in 2010. It offers a maximum workpiece height of 160 mm, a length of 2700 mm, and a width of 1300 mm. The machine is equipped with an overhead milling spindle and a horizontal drilling unit, enabling versatile machining operations. If you are looking for a high-quality woodworking machine, the SCM TECH Z2-27-C we have for sale is an excellent choice. Please contact us for further details. • Electrical: 400 V, 3 + N, 33 A, 50 Hz, switching capacity 10 kA Hsdpoy Dd R Iefx Aa Denp • Control system: Xilog Plus • Machining units: Saw unit (included), horizontal boring unit (included), milling spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (between double columns) 1210 mm • Max. travel speed: 60 m/min • Clamping system: pneumatic clamping bars; number of clamping bars: 6 • Suction cup sizes: 120x120 mm and 55x120 mm • Operating hours: 5,500 h

Kondisi: bekas, nomor mesin/kendaraan: 008238, Arbeitsbereich Achse X: 3660 mm Arbeitsbereich Achse Y: 1550 mm Hedpfx Aasx A E Tfj Donp Arbeitsebene: Nestingtisch Leistung Haupt-Spindel: 12 KW Anz. kontrollierte Achsen: 3 Achsen Anzahl Bohrspindeln: 12 Anzahl Werkzeugplätze: 15

Kondisi: bekas, nomor mesin/kendaraan: 008132, Tipe tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Penyambungan frais: ya Unit multifungsi: ya Kecepatan maju maksimum: 18 m/menit Ketebalan panel maksimum: 60 mm Hedew Idc Repfx Aa Denp Unit kerja: 7 unit

Kondisi: bekas, nomor mesin/kendaraan: 008108, de-1 Hnodpfjw Idduex Aa Dop

Kondisi: sangat baik (bekas), NOMOR KATALOG 8029 SPESIFIKASI TEKNIS - lebar track 300mm - lebar kerja rol 300mm - diameter maksimum cakram 350mm - diameter lubang cakram 70mm - tinggi pemotongan maksimum 120mm - lebar meja termasuk ekstensi 760mm - panjang meja 1540mm * dari atas: - penolak (penghalang pengaman dari mundurnya material) - rol selip, logam, penekan - penolak/pengait - rol selip, logam, penekan - poros dengan gergaji bulat - 2 rol licin selip, logam * dari bawah: - rel pemandu - penolak/pengait - track (rantai) - pelumasan sentral track - pengaturan halus kecepatan feeding - motor feeding 1,1kW - motor utama 18,5kW - diameter saluran ekstraksi 180mm - dimensi keseluruhan pjg/lbr/tgi 2250x1450x1600mm - berat 1570kg KEUNGGULAN Hnsdjzhbafspfx Aa Dsp – produksi Italia – kondisi sangat baik – multisaw bekas pakai Harga netto: 36.900 PLN Harga netto: 8.786 EUR sesuai kurs 4,20 EUR (Harga dapat berubah seiring dengan fluktuasi nilai tukar)

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 5.613 h, tinggi total: 2.350 mm, panjang total: 4.300 mm, lebar total: 1.880 mm, Warna: Abu-abu Berat kosong: 1.310 kg - Tahun pembuatan: 2016 - Dokumentasi tersedia: Ya - Tanda CE tersedia: Ya - Sertifikat CE tersedia: Tidak Hedpfozh Hkcsx Aa Donp - Nomor seri: AB/226310 - Jam kerja: 5613 - Daya motor utama [kW]: 5,5 - Jumlah sumbu yang dikendalikan [unit]: 1 - Area kerja X [mm]: 3050 - Area kerja Y [mm]: 900 - Area kerja Z [mm]: 60 - Jumlah spindle frais [unit]: 1 - Interface penahan alat: ISO30 - Kecepatan maksimum spindle [rpm]: 18.000 - Mesin bor horizontal: Ya - Spindle bor horizontal [unit]: 6 - Kedalaman bor maksimum [mm]: 35 - Mesin bor vertikal: Ya - Spindle bor vertikal [unit]: 12 - Kedalaman bor maksimum [mm]: 60 - Operasi manual: Ya - Sistem kontrol: SCM Xilog - Perangkat lunak: Xilog Plus - Unit gergaji tersedia: Ya - Perangkat pengaman: - Pengaturan kecepatan spindle: Tak terbatas (stepless) - Dimensi transportasi: 4300mm x 1880mm x 2350mm (p x l x t) - Berat transportasi [kg]: 1.310kg - Paket transportasi [unit]: 1 Informasi Keuangan PPN: Harga yang tertera belum termasuk PPN PPN/Skema perbedaan: PPN dapat dikreditkan untuk perusahaan Pengiriman dan tukar-tambah dapat dilakukan kapan saja untuk semua barang di bidang industri Glenn Smeets

Kondisi: sangat baik (bekas), NOMOR KATALOG 8031 DATA TEKNIS - lebar track 300mm - lebar kerja rol 300mm - diameter maksimum piringan 350mm - diameter lubang piringan 70mm - tinggi pemotongan maksimum 120mm - lebar meja dengan ekstensi 1030mm - panjang meja 1740mm * dari atas: - pemukul (penghalang perlindungan terhadap kembalinya material) 2 baris - rol geser, logam, penekan - pemukul/penguncian - rol geser, logam, penekan - rol dengan gergaji - 2 rol geser halus, logam * dari bawah: - list pemandu - pemukul/penguncian - track Hodpfszha Izox Aa Donp - pelumasan sentral elektrik untuk track - pengaturan kecepatan feeding halus - motor feeding 1,1kW - motor utama 25kW - diameter nozzle ekstraksi 1x200mm, 1x120mm - dimensi total p/l/t 2550x1800x1450mm - berat 1770kg KEUNGGULAN – buatan Italia – tidak dicat ulang – kondisi sangat baik – multi-saw bekas Harga netto: 57.900 PLN Harga netto: 13.786 EUR (tergantung kurs 4,20 EUR) (Harga dapat berubah seiring fluktuasi kurs yang lebih tinggi)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin gergaji format SCM SI16 SW Panjang meja geser 1500 mm Lebar pemotongan sisi kanan 1000 mm Tinggi maksimal pemotongan 100 mm Hnedpezg H N Njfx Aa Dsp Pisau scoring Ukuran pisau gergaji utama 250–350 mm Ukuran pisau scoring 120 mm Pisau gergaji dapat diatur sudut 0–45° Pisau gergaji dapat diatur naik/turun 3 kecepatan putaran pisau gergaji 3200/4500/5500 rpm Kecepatan putaran pisau scoring 9800 rpm Daya motor utama 5,5 kW Daya motor scoring 0,75 kW Diameter konektor hisap 120 mm

Kondisi: bekas, Tahun pembuatan: 1992, Arbeitsbreite: 520 mm Hobelhöhe: 250 mm Hobelwelle: Streifenmesser Messeranzahl: 4 Hedpfxeyt E Rae Aa Djnp Höhenverstellung: elektrisch Anzeige Hobelstärke: Scala Vorschubgeschwindigkeit: 2 Geschwindigkeiten Einzugswalze: Stahl Auszugswalze: Stahl Tischwalzen: nein Motorleistung: 5,5 kW Absauganschluss: 140mm Maschinenlänge: 1200 mm Maschinenbreite: 1400 mm Gewicht: ca. 900kg

Kondisi: bekas, Tahun pembuatan: 2005, Lebar kerja: 180 mm Tinggi kerja: 110 mm Poros kerja: 4 Susunan spindle: bawah, kanan, kiri, atas Daya motor poros bawah & atas: 7,5 kW Daya motor poros kanan & kiri: 7,5 kW Penyesuaian poros bawah: - Penyesuaian poros kanan: - Penyesuaian poros kiri: roda tangan Penyesuaian poros atas: roda tangan Kepala planer bawah & atas: Centrolock Kepala planer kiri & kanan: Centrolock dikombinasikan dengan kemampuan profiling Kecepatan pengumpan: 2 Tekanan rol pengumpan: pegas Konsumsi arus: 32,8 A Koneksi ekstraksi: Hedpjyq R Aiefx Aa Dsnp Panjang mesin: Lebar mesin: Berat:

Kondisi: bekas, Tahun pembuatan: 1999, Carriage length: 3800 mm Cutting width at rip fence: 1500 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Rip fence display: digital Crosscut gauge display: scale Saw blade diameter: 400 mm Hodpjvxi Ddsfx Aa Djnp Speeds: 3 Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 80 mm and 120 mm Machine length: 3900 mm Machine width: 2200 mm Weight: 1000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1997, nomor mesin/kendaraan: AB/113309, Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, ketinggian potong (maks.): 95 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 300 mm, penyesuaian kemiringan mata gergaji: 45 °, jenis penyesuaian ketinggian: mekanis, lubang pisau gergaji: 30 mm, jenis aktuasi: manual, kecepatan rotasi (maks.): 4.000 rpm, lebar total: 1.300 mm, berat keseluruhan: 750 kg, tahun perombakan terakhir: 2025, Perlengkapan: Penandaan CE, doser, pelindung bilah gergaji, SCM Si 320 Panel Saw Used machine Ref. No.: AB/113309, Year: 1997 Article number: JA_G260501 History The machine comes from a vocational school. In 2026, a new saw was acquired for investment reasons. The last maintenance was in 2025, during which the belts and various small parts were replaced. Description Max. cutting height at 90°: 95 mm Max. saw blade diameter: 300 mm Adjustment: manual Scoring unit: yes Max. cutting width: 1300 mm Adjustment: manual Sliding table length: 3200 mm Saw blade tilt: 0° to 45° Adjustment: manual Mitre fence: yes Power supply: 400V / 50 Hz, 4.0 kW Speed: 4000 rpm Weight approx.: 750 kg Extraction ports: 100 + 80 mm Dimensions (LxWxH): 3600 x 2100 x 1400 mm Condition / Service Performed Hodpfey Uurqox Aa Djnp • Machine cleaned • Function tested • Age- and use-related signs of wear • Available immediately from stock Errors and changes in technical specifications excepted. Note on Used Equipment: • Prices are ex-works (unless otherwise specified!) from our site in Ottendorf-Okrilla, Germany – loaded free on truck! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with shown VAT. • All items are sold as seen, without any warranty claims. Buyers are welcome to inspect the items at our site. • Our general terms and conditions apply. • Special agreements are only valid if made in writing. • Any items visible in the background of the photos are not included in the scope of delivery. • Saw blades shown are for demonstration purposes only and are not included. Shipping options: • We are happy to provide a transport quote. • Collection from our site in Ottendorf-Okrilla is free by arrangement. (Set-up and demonstration of the machine is possible on request at additional cost!) • Optionally, our trained service team can install the machine at your site and provide a brief instruction. Travel, transport, and service times available at extra cost.

Kondisi: bekas, Tahun pembuatan: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area Drilling/Grooving mm: 0 x 800 / 0 x 800 Stroke of X axis mm: 750 Max. traverse speed of X-Y axes m/min: 25 DRILLING UNIT Vertical spindles: Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis): Number 2 (1+1) Horizontal spindles (along X axis): Number 1 Fixed grooving saw (direction): X Grooving saw diameter mm: 100 Max. saw thickness mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Grooving saw speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Compressed air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air speed m/sec: 20 Extraction nozzle diameter mm: 80+80 F10L Drilling Unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads: 1 in X direction with one bit, 1 double drilling head in Y direction (1 + 1 Drill chuck D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Workpiece positioning and drive of working unit A CNC-controlled suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along X and Y axes occurs on THK linear guides with transmission via reinforced toothed belts. Movement along Z axis is pneumatic on ball-bushing guides, with adjustable stopper positioning. Positioning of the working units is via DC motor technology and drives. Hjdpfovvi I Rjx Aa Donp CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and operator language fault messages Programming - Programming via the CN - Automatic optimization of drilling operations - Possibility of panel zero-point shift - Possibility to store and import drilling programs via USB dongle - Ability to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the manuals - Graphical representation of unit configuration Vacuum suction cup "B-Power" Vacuum suction cup with double vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine operating interface Software: Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, min. 2GHz; multicore processor recommended - Memory: Minimum 1GB, 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (Package includes an installation DVD and a USB dongle) Xilog Maestro features Programming - Parametric, graphical programming - Assisted programming with graphic and syntax aids for drilling operations - Ability to create and store machining macros Integrated additional functions - Self-diagnosis and operator language fault messages

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Hnodpsvwbp Asfx Aa Dop