Beli Scm 2252 bekas (589)

Kondisi: bekas, Tahun pembuatan: 2015, panjang total: 2.300 mm, lebar total: 1.950 mm, tinggi total: 1.850 mm, AG-20240613-01 Itjdpsxhchdsfx Adqen

Kondisi: bekas, Tahun pembuatan: 1995, Trol 1500 mm Lebar potong: 1280 mm Tinggi potong: 80 mm Ijdpfjxg Nawox Adqotn Motor 4 kW 380V

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, DIGITALLY-ADJUSTED EDGE BANDING MACHINE WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Iodpfx Aderx S Ipeqjtn Year: 2017 (Photos taken prior to overhaul, before functional tests & cleaning) MACHINING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm thickness when using the corner rounding unit - Panel length for edging: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge band thickness (coil): 0.4 to 3 mm without corner rounding max 3 mm when using the corner rounding unit - Edge band thickness (strip): max 6 mm without corner rounding max 3 mm when using the corner rounding unit - Edge width: panel thickness +2 mm on each side - Feed drive (feed speed): 11 m/min - Minimum part interval: 600 mm - Workpiece overhang from transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Barcode reader interface prepared - 800 mm diameter reel holder - Front extension table - Easy Size: digital adjustment of the infeed guide and panel height - Anti-adhesive spray group - Edge trimmer (RT-V jointer) 12,000 rpm - Infrared pre-heating of panels at entry - Gluing group (VC-VM) with interchangeable glue pot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cutter Digitally positioned pressing (marouflage), 3 rollers including 1 motorized, timed roller - Tilting end trimming unit 0-20°, 12,000 rpm - Digital top/bottom flush trimming unit with copying system. 2 mm 1/4-round or bevel cutter, 12,000 rpm - R2mm corner rounding unit 12,000 rpm, digitally adjusted - R1 & R2 mm top and bottom scrapers, digital positioning - Straight top and bottom scrapers - Edge finishing sprayer (Nebulization system) OTHER FEATURES: - Jointer group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming (milling) motors: 2x 0.65 kW - CE marking - Lockable isolator, emergency stop push buttons - Power supply: 380V, 3-phase, 50 Hz - Pneumatic supply: 8-10 bar (max), dry air - Dust extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Flush trimming: 360 m³/h Scrapers: 2x360 m³/h Maximum floor space required, operational: 10.80 x 2.40 m Dimensions for transport (L x W x H): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine delivered with mounted tools, manual, spare parts list, and schematics. On order, the machine will be serviced, upgraded to compliance standards, and undergo dynamic functional control and testing.

Kondisi: sangat baik (bekas), Mesin amplas sabuk lebar SCM Sandya 3 model: 3 RCS 95 Iedpfx Ajxl Twqedqetn - Lebar pengamplasan maksimum 95 cm - Satu motor 11 kW - Agregat kalibrasi pertama dengan rol logam, agregat kedua dengan sepatu tekan, rol berlapis karet - Berat 1 ton, tahun 1998 Mesin dalam kondisi sangat baik. Mesin berjalan dengan sangat baik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, lebar kerja: 1.100 mm, daya: 15 kW (20,39 hp), Mesin amplas pita lebar dalam kondisi baik. Dilengkapi dengan rol dan rol kombinasi. Menyedot di permukaan karpet, ideal untuk mengamplas objek yang lebih kecil. Lebar pengamplasan 1100 mm. Transportasi ke seluruh Eropa dapat diatur dengan harga yang bagus. Iodpfxoxmfhde Adqjtn

Kondisi: sangat baik (bekas), pl-hu-001 Iodpfx Adoxl Dqbjqetn

Kondisi: bekas, Motor 6 / 7,5 kW Itjdpfx Asw Enw Iodqon Lokasi penyimpanan: Pemasok

Kondisi: bekas, Milling machine in good working condition Isdpfx Adjuxlvmjqotn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, pl-hu-001 Itedpfsxauw Usx Adqen

Kondisi: sangat baik (bekas), CNC Window Processing Centre. Iedpfx Ajwmxkhsdqjtn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 250 kg, sambungan udara terkompresi: 6 batang, ketebalan tepi (maks.): 3 mm, tinggi benda kerja (maks.): 60 mm, Dijual mesin pelapis tepi bentuk SCM Contura bekas. Tahun produksi 2004, kondisi hampir baru, hanya sekitar 10 jam kerja. - Pengumpan dengan satu rol - Rol penekan untuk bagian lurus (dapat dilepas untuk bagian bentuk) - Elemen pemanas untuk pemanasan awal tepi - Tangki lem dengan pemanas atas & bawah - Sasis - Ketebalan pelapis 0,5 - 3 mm - Ketebalan benda kerja 12-60 mm Itedpfxsu Apyks Adqjn - Panjang benda kerja minimal 230 mm - Kecepatan pengumpanan 2-10 m/menit Mesin dapat dilihat di gudang kami di Oberteisendorf dengan janji temu. Transportasi yang sesuai dapat diatur. Jika ada pertanyaan, silakan hubungi kami.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Unit pelapis tepi Unit pemotong ujung Unit pemangkas Unit pemangkas ke-2 Unit pengamplasan Itodpfx Aoxfuh Djdqjn

Kondisi: sangat baik (bekas), SCM S520E Class Thickness Planer Working width: 520 mm Iedpfx Adeup Dkpeqjtn Working height: 3–250 mm 4-knife cutterhead Traditional knives 4 feed speeds: 5–8–12–19 m/min Electric height adjustment of the worktable CE certified Technical documentation (DTR included) Main motor power: 5.5 kW Extraction port diameter: 150 mm Machine dimensions: 110 x 110 x 115 cm (H) Machine weight: 760 kg

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 1.200 mm, lebar meja: 800 mm, itu berfungsi penuh Iedpfx Adeulkm Asqotn

Kondisi: baru, Tahun pembuatan: 2025, Professional long belt sander Electric table height adjustment Quick belt tensioning via lever Upper belt with additional graphite coating Professional sanding shoe 250 mm diameter rollers ensure optimal guidance 2 sanding belt speeds Reversible motors (right/left rotation) Tiltable sanding shoe adapts to the surface Quick and easy sanding belt replacement Standard right-left rotation Iodpfx Ajwxrl Nodqstn Made in Italy. Precisely balanced rollers provide optimal belt drive Quick belt tensioning enables fast and hassle-free belt changes. Technical data: Worktable dimensions: 2500 x 1100 mm Worktable height adjustment: 580 mm Worktable transverse travel: 620 mm Sanding shoe dimensions: 150 x 360 mm Belt speed: 9 m/s and 18 m/s Motor power 400 V / 50 Hz / S6 - 40%: 4 kW Table height adjustment motor power: 0.45 kW Drive roller diameter: 250 mm Sanding belt dimensions: 7100 x 150 mm Dimensions (L x W x H): 4040 x 1510 x 1510 mm Extraction port diameter: 140 mm Weight: 420 kg

Kondisi: bekas, Tahun pembuatan: 2007, Slot spindle 3 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC (still in operation, can be inspected until end of December 2025) ----- Powerful and flexible CNC production line for windows and doors Processing of workpieces up to a maximum of 4500 mm in length, 250 mm in width, and 150 mm in thickness Consisting of Windor 60, version B Infeed conveyor Slot section: ----- Pos. 1: Cross-cut saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Pos. 2: 1st slot spindle ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" counter setup - Infinitely variable vertical positioning - Interpolating rotation, automatic bevel window facility +/- 60 degrees Pos. 3: Electrospindle with HSK 63 F tool holder ----- - Min/max speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slot spindle ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" counter setup Itsdpfx Aow Im Iijdqon - Infinitely variable vertical positioning - Interpolating rotation, automatic bevel window facility +/- 60 degrees Pos. 5: 3rd slot spindle ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" counter setup - Infinitely variable vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following operations in through-feed: Lock case routing and 9-degree Anuba hinge drillings from the right. Dowel hole drilling and strike plate markings from left and right, each with 7 spindles. Cup hinge drilling and olive handle drilling from above. Profile section ----- Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder ----- - Working from the left - Min/max speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profiling spindle from the right ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 2nd profiling spindle from the right ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 3rd profiling spindle from the right ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm...

Kondisi: baru, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" configuration - Control console "eye-S" (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and edging area - "Nesting" tracing rollers - Release agent spray unit "AAR" 1 - Edge finishing spray unit - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Bevel and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, automatic straight/R/R positioning, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" Itsdpfx Aswkf Ihsdqen - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Promotional machine offered at a special price.

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 3.200 mm, lebar potong di pagar rip: 1.270 mm, ketinggian potong (maks.): 100 mm, diameter mata gergaji: 315 mm, diameter utama gergaji: 315 mm, panjang pemotongan: 3.200 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, - Tahun pembuatan: 2012 SPESIFIKASI TEKNIS: - Diameter maks. mata gergaji: 315 mm - Panjang pemotongan: 3200 mm - Tinggi pemotongan maks: hingga 100 mm - Pemotongan sudut: 0-45 derajat - Kecepatan putaran mata gergaji: 4000 rpm - Daya motor utama: 5 kW - Daya motor scoring: 0,9 kW Iedpfx Adsxdyvdoqjtn - Pemotongan paralel maks: 1270 mm - Berat: 800 kg

Kondisi: bekas, Tahun pembuatan: 1980, 001 Itsdpfx Adexl Tfbeqjn

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, DMC SD 30 RCS 110 - Automatic Wide Belt Sander new ex-demo machine, under warranty, unused, unwrapped from foil Specifications: Working width: 1,100 mm Min./max. working thickness: 4/170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 1,900 mm Configuration: Fitted with 1st “R” unit (roller) and 2nd combined “CS” unit (roller/pad) “C” version for RCS 110: – Pneumatic actuator activating the roller of the first “R” unit – Pneumatic actuator activating the roller of the second “CS” unit – MESAR electronic pad with 20 sections – Electronic adjustment of the working table European safety standards (CE compliant) R120/ Steel calibrating roller, 120 mm diameter, at position 1 R140/65 – 65 Sh rubber sanding roller, 140 mm diameter, at position 2 Main motor electronic ammeter for current consumption reading Electronic working thickness display Electronic oscillation of sanding belts Rubber pressure rollers Vertical anti-kickback roller at the infeed on the first unit Rubber feed belt, 60 Sh Infeed and outfeed support rollers with two rollers each Automatic centering and tensioning device for the feed belt Main motor power: 11 kW (2 speeds) Oscillating nozzle unit to blow off dust from sanding belts of the first and second units with timed operation Feed belt speed adjustable via inverter: 0.75 kW (3.5–18 m/min) "EYE-S" electronic programmer for machines with electronic sectional pad - 10’’ touch display Ijdpsw Rpf Nefx Adqjtn

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Itjdpfx Adswwl Nlsqen Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, tinggi penyerutan: 105 mm, lebar perataan: 180 mm, berat keseluruhan: 990 kg, SCM Profiset 40 ep, Four-Sided Planer Exhibition machine, brand new, year of manufacture 2023 Min. working width (finished dimension): 23mm Max. working width (finished dimension): 180mm Min. working height (finished dimension): 10mm Max. working height (finished dimension): 105mm Min. length of single workpiece: 300mm Feed speed: 6 - 12 m/min Feed motor power: 0.7/1.1 kW (1/1.5 HP) Horizontal spindle motor power (each): 7.5 kW (10 HP) Vertical spindle motor power (each): 7.5 kW (10 HP) Spindle speed: 6,000 rpm Spindle diameter: 35mm Vertical spindle clamping length: 120mm Horizontal spindle clamping length: 190mm Min./max. tool diameter on horizontal spindles: 100mm Min./max. tool diameter on vertical spindles: 100 - 120mm Profiling capacity without axial adjustment on vertical spindles: 10mm Adjustment range for planer heads: +/- 1mm Feed roller diameter: 120mm Iedpfx Adewh Nyijqstn Infeed table length: 1,700mm Adjustment range for jointer table and fence: 10mm Manual lubrication pump Extraction port diameter, 4 pieces: 120mm CE compliant design

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 950 mm, tinggi penggerindaan: 170 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: tiga fasa, - produksi Italia - tahun produksi: 2007 - sepatu kombi PARAMETER TEKNIS: - lebar pengamplasan: 950 mm - tinggi pengamplasan: 4-170 mm - daya motor: 7,5 kW - agregat 1: rol baja dengan sistem tekan pneumatik - diameter rol: 110 mm - agregat 2: sepatu kombi - tekanan pneumatik pada rol karet: 78 Shor - sepatu dengan tekanan pneumatik - osilasi pneumatik - tiupan udara pada sabuk - pengaturan ketinggian elektrik Itjdpfx Adsxdxfqjqsn - dua kecepatan sabuk: 8,3 m/dtk dan 16 m/dtk - posisi ketinggian pengamplasan secara elektronik - kecepatan pemajuan dapat diatur secara terus-menerus: dari 4-20 m/menit - panjang material minimal: 500 mm - diameter nosel: 2 x 140 mm - dimensi mesin (p/l/t): 150 x 180 x 210 cm - berat: ~ 1010 kg

Kondisi: bekas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Length of jointer table: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min SCM Superset PLUS Comp. 31, also suitable for window production ---- Machine is cleaned and functionally tested! Technical Specifications: ---- Working width: max. 240 mm Working height: max. 200 mm Itedpfx Adovnv Uzeqen Feed: 6 to 36 m/min 1st Spindle ---- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK Tool Holder ---- First right tool position, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK Tool Holder ---- First left tool position, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th Spindle ---- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th Spindle ---- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th Spindle ---- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ---- 2 feed units after the upper spindles for reducing the axial distance from 620 mm to 450 mm Air cushion lubrication in the worktable Flanged feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling units with belt drive and quick-change system HSK 85 in positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) Positions (3 – 4 – 5) Mobile 10 control unit PRL equipment for scribing glazing beads on 2nd upper horizontal spindle Machine is supplied without machining tools (technical data according to manufacturer – no guarantee!)

Kondisi: bekas, Working width: 410 mm Joiner table length: 1450 mm Number of planer knives: 4 pcs Motor power: 4 kW Dimensions (L/W/H): 2650 x 850 x 1100 mm Machine weight approx.: 750 kg Surface Planer F 410 N ----- Technical manufacturer description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Infeed table length: 1450 mm Aluminum fence tiltable up to 45° Planer fence dimensions: 1100 x 170 mm 4-knife cutterblock, diameter: 120 mm Cutterblock speed: 5000 rpm Itjdpfxewzmu Dj Adqen Motor power: 4 kW TERSA monoblock reversible knife cutterblock (disposable knives) SCM planing guard integrated in machine base Extraction port: 120 mm diameter Manual star-delta switch Motor protection switch with undervoltage release Main switch, lockable Automatic motor brake Tiltable auxiliary fence ----- Price of the above-mentioned machine on request! ----- (Technical data according to manufacturer – no liability assumed!) All prices quoted net, plus statutory VAT.