Beli Scm Si 12 Sw bekas (575)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, 9-spindle moulding machine with SCM Control 100 PC control of all spindles Maximum working width: 240 mm Minimum working width: 25 mm Maximum working height: 120 mm Minimum working height: 10 mm Minimum length: 640 mm Feed speed: 6 – 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length vertical spindles: 140 mm Usable length horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to table: 0 – 80 mm Axial adjustment of the horizontal spindles relative to right fence: 0 – 45 mm Min/max profile tool diameter: 100 – 220 mm Min/max cutter block diameter: 120 – 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool: 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and fence: 10 mm Extraction requirement: 7500 m³/h Compressed air supply: 6 – 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle arrangement: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Itsdpfog Umrmex Aahsr Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET-UP quick adjust system Work tables with fine adjustment of all units via Control 100 PC 80 mm axial travel of vertical spindles for large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Motorised height adjustment of feed system and spindles with independent control Split pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic infeed system Used machinery notice: • Technical data subject to change and prior sale. • Prices are ex-location, loaded free of charge. • The machine has been cleaned and function tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machine on site. • Special agreements only valid in written form. (We only respond to enquiries including your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2006, en Itsdpfox Iwc Ssx Aahor

Kondisi: baik (bekas), Kode: 0278 Merek: TECNOMAX SCM Model: ST 4 ELITE - Standar CE Mesin gergaji-serut dengan pisau gergaji miring dan unit scoring untuk pertukangan, furnitur, kusen jendela kayu, pintu, panel, dan berbagai aplikasi kayu - Standar CE Data teknis: Itjdpfx Ajx Ivuasahjr Panjang carriage pengukur: 3200 mm Kemiringan pisau: 90-45 derajat Diameter maksimum mata gergaji dengan unit scoring terpasang: 315 mm Proyeksi maksimum mata gergaji dari meja pada 90°/45°: 100/70 mm Lebar potong pada pengarah paralel: 1000 mm Diameter pisau scoring: 100 mm Serut spindle: Panjang spindle berguna: 125 mm Kecepatan putaran spindle: 3500/6000/8000/10000 rpm Diameter alat maksimum: 210 mm Motor tiga fasa: 5,5 Hp Diameter inlet hisap: 120 mm Dimensi total mesin terpasang: 3600 x 3000 x 1100 mm Dimensi total untuk transportasi: 3600 x 1600 x 1100 mm Berat: 645 kg

Kondisi: bekas, Meja mesin frais SCM T130 NPS - bekas - pembatas frais dapat diatur halus, meja untuk mortise dan slot, putaran kanan/kiri ----- Data Teknis ----- Ukuran meja: 1.080 x 750 mm, Diameter spindle: 30 mm, Kecepatan: 3.000/4.500/6.000/7.000/10.000 rpm, Diameter port ekstraksi: 120 mm, Itjdew Nv Nfspfx Aahjr Diameter port ekstraksi bawah: 120 mm

Kondisi: bekas, 1 unit mesin serut dan penebal SCM FS410 lengkap dengan perpipaan, sesuai gambar dan inspeksi, pembongkaran mandiri. Warna: abu-abu. Kondisi: bekas. Metode pembayaran: pembayaran di muka melalui transfer bank. Lokasi penyimpanan: Bengkel pertukangan/Gudang 2. Pengiriman: Hanya pengambilan sendiri – tidak ada pengiriman untuk item ini! Itodpfx Aasx Ifgfohsr

Kondisi: sangat baik (bekas), 7775 Iedpfxjxl Umgo Aahjtr

Kondisi: baru, The best-selling edge banding machine in its class with an unrivaled price-performance ratio. SCM Edge Banding Machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, featuring a new corner rounding unit. Edge thickness, roll material: 0.4 - 3 mm Max. edge thickness, strip material: 5 mm Min. – max. workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9,000 rpm Glue pot: 0.18 kW, 0.8 kg End trimming saw unit: 0.19 kW, 12,000 rpm Itedpfx Asc S Di Rjahjr Flush and radius trimming unit: 2 × 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Flat scraper Grooving unit: 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush and radius trimming unit with tracing rollers Heated infeed fence Glue pot quick-change device ...

Kondisi: bekas, Tahun pembuatan: 2023, en-US: Technical Specifications Working Area I.M.S. I.U. Working area X-axis 5515 mm (217") * Working area Y-axis 1620 mm (63¾") * Panel passage Y 1900 mm (74¾") Panel passage Z 250 mm (9¾") Workpiece length in pendulum operation 2600 + 2600 mm (102" + 102") Traverse speed X-Y axes PRO-SPACE 56 m/min (184 ft/min) Traverse speed X-Y axes PRO-SPEED 78 m/min (256 ft/min) * For further details, please refer to the relevant machine layout. With the 5-axis motor, the working area in Y increases to 1680 mm (66") for motor JQX or to 1720 mm (67½") for motor KS/KT. Maximum loadable panel width for horizontal drilling, electrospindle oriented only vertically, no central reference stops present Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Standard electrical data 400 V voltage 50 Hz frequency 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h (2650 CFM) Extraction air speed 30 m/s Extraction nozzle diameter 250 mm (9.8 inches) Noise level VSA * LAV * during drilling 72.2 dB(A) 74.6 dB(A) during milling 74.3 dB(A) 80.7 dB(A) Reference standard EN ISO 11202:1995 * VSA = unloaded, without extraction * LAV = in operation, with extraction Location: Nattheim Iodpsxwht Defx Aahotr

Kondisi: baik (bekas), Penebal otomatis untuk kayu, bengkel pertukangan, pembuatan furnitur custom, pabrik furnitur, pabrik penggergajian, workshop kayu, kusen jendela kayu, galangan kapal, plastik, material komposit, dan berbagai aplikasi lainnya - Standar CE Data teknis: Lebar kerja: 520 mm Tinggi kerja maksimum: 250 mm Tinggi kerja minimum: 3 mm Panjang kerja minimum: 210 mm Jumlah pisau: 4 Pengangkatan meja otomatis Kecepatan makan: 5-8-12-18 m/menit Itjdpfx Aex Ivfreaher Motor: 5,5 Hp Diameter inlet hisap: 150 mm Dimensi total: 1050 x 1000 x 1050 mm Berat: 650 kg

Kondisi: bekas, Serut penebal SCM S 63 - bekas - Itjdpfx Aasxm R Uvehsr Balok penekan rantai, Roller bawah meja, Motor pengumpan terpisah ----- Data teknis ----- Lebar serut: 630 mm, Jumlah pisau: 4 buah, Tinggi lebar: 235 mm, Kecepatan umpan: 6 /9/12/18 m/menit, Nozel ekstraksi Ø: 180 mm, Berat: 1035 kg

Kondisi: bekas, Tahun pembuatan: 1999, 1 unit mesin frais meja SCM T130N dengan perpipaan dan berbagai aksesori, sesuai gambar dan inspeksi, pembongkaran mandiri Warna: abu-abu Tahun pembuatan: 1999 Kondisi: bekas Metode pembayaran: pembayaran di muka via transfer bank Iodpfjx Iffuex Aahjtr Lokasi penyimpanan barang: Bengkel pertukangan/Ruang 2 Pengiriman: Hanya penjemputan sendiri - Tidak ada pengiriman untuk item ini!

Kondisi: sangat baik (bekas), NOMOR KATALOG 7479 Data teknis: - lebar poros: 410 mm - poros 4 pisau (TERSA) - sisir peredam suara - pelindung poros - panjang meja: 2610 mm - meja masuk lebih panjang: 1435 mm - meja dari besi cor - kedua meja dapat diatur - rel pandu asli dari besi cor, dapat diatur sudutnya - rem - diameter sambungan ekstraksi: 115 mm - motor: 4 kW - dimensi (p/l/t): 2610 x 960 x 1110 mm - berat: 578 kg KEUNGGULAN Ijdouwp Ecopfx Aahstr – Produk buatan Italia – Poros 4 pisau – Rem – Sisir peredam suara – Meja masuk lebih panjang – Tidak dicat ulang – Serut kayu bekas, kondisi sangat baik, dokumentasi asli DTR Harga netto: 21.900 PLN Harga netto: 5.200 EUR (berdasarkan kurs 4,2 EUR) (Harga dapat berubah jika terjadi fluktuasi besar)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Edge banding machine SCM Model: Olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediately Location: In stock Condition: Like new Year of manufacture: 2023 GENERAL: A complete and versatile edge bander for small and medium-sized businesses, capable of processing a wide range of materials to a high standard in a compact footprint. The SCM Olympic 500 features an electronic adjustment system and enables processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software (HMI) • Maestro connect: Ready for later installation without gateway • 2 radius processing, chamfering on all units with multi-blade tooling - Fine trimming and radius scraping unit, radius = 1 mm - Fine trimming and radius scraping unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at the infeed KIT “SAV€NERGY” Internal LED lighting for the enclosure and glue application area “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing cutter unit “RT-V1” “EASY SIZE” device – electronic quick adjustment of jointing cutters Glue application unit “VC-VM” Ceramic lamp with infrared rays for preheating workpieces Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ automatic switching between straight/R/R, for “Round 2-A Multiedge 1R” unit Radius scraping unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Itodpfx Aeq A Tyzoahsr Machine length: approx. 4950 mm SPECIAL PRICE – LEASE RETURN!

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Iedpfxsxnldbo Aahstr

Kondisi: baik (bekas), Kode: 0198 Merek: SCM TECNOMAX Model: MB 21 - Standar CE Mesin bor ganda dengan 21 spindle untuk furniture, furnitur custom, dapur, furnitur kamar mandi, panel dan berbagai aplikasi lainnya - Standar CE Data teknis: 21 spindle dengan pelepasan cepat Jarak antar spindle mm 32 Tinggi meja kerja mm 900 Ukuran meja kerja mm 905 x 372 Itedpfxjxbpbqo Aahor Diameter alat maks mm 40 Jarak pusat bor maks mm 640 Langkah kepala bor maks mm 70 Daya motor Kw 1,8 Tebal panel min/maks 10/85 mm Pergerakan manual untuk memiringkan unit operasi 2 penjepit pneumatik Pemandu samping dengan stop Tekanan udara terkompresi 6 bar Dimensi keseluruhan mm 1000 x 800 x 1300 h Berat kg 273

Kondisi: bekas, Working area: 2,600 x 1,250 mm X-axis: 2,700 mm Y-axis: 1,600 mm Z-axis: 250 mm Spindle motor: 7.5 kW Iedpsn A Dwgofx Aahotr Feed rate: max. 38 m/min Video: available on request CNC machining center SCM Routech R 3000 for processing panel materials with automatic loading (vacuum destacker) and outfeed. Special price for self-dismantling and self-collection.

Kondisi: bekas, Mesin bekas Perlengkapan dan data teknis: - Poros pisau pengeplanan 4-strip - Kecepatan umpan 7,5/15 m/menit Joiner: - Lebar kerja: 500 mm - Panjang meja total: 2200 mm - Motor: 4 kW Iodpfx Aaex Entcohetr Thicknesser: - Tinggi kerja minimum: 3 mm - Tinggi kerja maksimum: 235 mm - Pengambilan serpihan maksimum: 8 mm - Tampilan digital pengaturan ketinggian dengan tampilan desimal Ketersediaan: segera Lokasi: 63934 Röllbach

Kondisi: sangat baik (bekas), Nomor katalog: 7780 SPESIFIKASI TEKNIS MESIN SERUTAN/PERATA: - lebar poros: 410 mm - poros dengan 3 pisau - pemandu dapat disetel sudutnya - panjang meja: 2060 mm - kedua meja dapat disetel MESIN PENEBAL: - ketebalan maksimum benda kerja pada mesin penebal: 200 mm - pelindung poros penebal - dari atas: - anti kickback pawls - poros penggerak masuk bergigi dan putar - poros penyerut - poros penggerak keluar halus Ijdpfjxqyqhsx Aahotr - 2 rol yang dapat disetel di meja bawah - motor utama 3 kW - 2 kecepatan umpan - dimensi (panjang/lebar/tinggi): 2190x800x970 mm - berat: 900 kg KELEBIHAN – buatan Italia – kondisi sangat baik – mesin kombinasi perata-penebal bekas Harga netto: 14.900 PLN Harga netto: 3.550 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Edge material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: approx. 230 / 1600 Control / Software: WinEdge Feed speed (variable) m/min: approx. 10 - 30 Protective and soundproof cabins FORMATTING UNITS (per side): Itjdpfxjl Hydmo Aaher No. 2 hogging units (2 x approx. 5.8 kW) No. 2 jointing-milling units aft (2 x approx. 4 kW) EDGE BANDING SECTION (per side): Gluing unit (hot melt glue + pre-melter) Pressure zone (CNC-controlled) Magazine for edge rolls (number of slots): 6 Pre-milling unit 08.055 (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW, 0°-30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x approx. 4 kW) Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air blower – edge finishing

Kondisi: sangat baik (bekas), CATALOG NUMBER 7850 Technical Data: - Maximum working width: 1100 mm - Maximum working height: 160 mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + pneumatically-actuated sequential pad + metal roller - Motor power: 15 kW - Brake From above: - Divided slip rubber roller - Processing unit - Divided slip rubber roller - Unit with pad - Divided slip rubber outfeed roller - Cleaning brush Isdpfx Asx Hhy Soahetr From below: - 2 slip metal rollers - Pulling belt - 2 slip metal outfeed rollers - Pneumatic belt oscillation controlled by photocell - Electric table lifting - 2 feed rates - Feed motor power: 0.75 kW - Sanding thickness potentiometer - Operating pressure: 8–10 bar - Extraction connection diameter: 3x165 mm - Overall dimensions (LxWxH): 1900x1700x1930 mm - Weight: approx. 1502 kg ADVANTAGES – Italian-made, SCM brand – 2 processing units – Sanding thickness potentiometer – Pneumatic sequential pad – Not repainted – Includes DTR technical documentation – Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price based on exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Kondisi: sangat baik (bekas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in strips (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Pressure belt driven (C.N.) Spraying unit (for liquid anti-adhesive) AAR Adjustable stop ruler, C.N. controlled "EASY SIZE PLUS" Jointing unit 2 x Kw Radiator for edge warming Gluing unit (P.U.R. glue + pre-melter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (C.N.-controlled) Edge magazine for rolls - 1 Cut-off unit K/SEL Pre-milling unit RS/K Milling unit RI/800 (3 pos.) Multi-function unit (radius and profile milling unit) "4 EDGE" KIT Spraying units (for sliding fluid) Profile scraper unit RAS/1000 Itjdsxlqntjpfx Aaher Flat scraper unit RCA/2C Universal milling unit for grooving/rebating and profiling K-100 (1 x Kw 1.8) 90° Hot air radiator - edge trimmer Return direction "SAG" Mod. SPINNER 47 / 63

Kondisi: sangat baik (bekas), 4-sided DOUBLE END PROFILING LINE currently set up for INTERIOR DOORS, Iedpfx Aaewzmbqjhotr Comprising the following machines: X10023A) CELASCHI driven roller conveyor for infeed X10023B) CELASCHI DOUBLE END PROFILER model TSA 3 B 480 A installed total power KW 65 X10023C) CELASCHI 90° transfer (L-shaped driven roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER model TSA 2 B 360 installed total power KW 65

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness with rolls (min/max) mm: 0.3 - 3 Edge thickness with lippings/strips (min/max) optional: mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and soundproof enclosure Cam spacing (mm): 500 Itodpfxsk Nk R Ds Aaher FORMATTING UNIT (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Cutting unit (2 x approx. 5.8 kW) Universal milling unit 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (No. 2 positions) + edge pressing zone End trimming unit (2 x 0.35 kW approx.) Pre-milling unit (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx.) 0°-30° Multi-functional unit (radius milling and contour milling aggregate) with 2 revolvers (8+8 positions) - max 27 m/min Universal routing unit for grooving/rebating and profiling 1 x approx. 4 kW (0° - 90°) Profile scraper unit + flat scraper unit + buffing unit

Kondisi: sangat baik (bekas), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 14 / 60 Working width (min/max) mm: 260 (approx.) / 3200 Control/Software: MAESTRO PRO EDGE Feed speed (adjustable) m/min: 10 – 40 Safety and noise protection cabin + cam pitch (mm): 400 FORMATTING UNIT (per side): Itsdpswhi Slefx Aahjr - Protective pre-milling cutter AS (1 x 4 kW) - Chopping mill DTR (2 x 8 kW) - Spraying unit (for liquid non-stick) AAR EDGE BANDING SECTION (per side): - Preheating unit for edge workpiece - Gluing unit (Hot Melt + pre-melter) - Pressure zone (CNC-controlled) - Edge magazine for rolls (2 positions) motorized - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC-controlled) RI/S 2P - Profile copying milling unit (tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM with Fast-Release - Profile scraping unit RAS/S - Flat scraping unit RCA/2C - Spraying unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Portal-type machine, part of the line (SOFIT code: J10039) Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (guides the sliding carriage) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction pads No. 2 external roller conveyors (at floor level) for infeed of panel stacks to the feeding station No. 1 external motorized roller conveyor (receives panels) from the feeding station Separate electrical control cabinet Electronic PLC control system, MAGELIS Full perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 10 Panel thickness (min/max) mm 10 - 60 (approx.) Min. panel dimensions mm 210 x 230 (approx.) Max. panel dimensions mm 1200 x 3200 (approx.) Total connected load kW Itodpfx Ael Hycwsahjr