Beli Scm Si 450 E bekas (580)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AB00003274, berat keseluruhan: 865 kg, jarak pergerakan sumbu X: 3.050 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 50 mm, RINCIAN TEKNIS Area kerja Sumbu X: 3.050 mm Area kerja Sumbu Y: 800 mm Area kerja Sumbu Z: 50 mm Kepala bor F10L: 10 spindel Spindel bor vertikal: 7 (mandiri) Spindel bor horizontal di X: 1 Spindel bor horizontal di Y: 2 Pisau gergaji terintegrasi pada sumbu X: 1 RINCIAN MESIN Kontrol: Layar sentuh 7" Berat: 865 kg Iodpfx Aeyfg Ahsg Rjtd

Kondisi: baru, - NEW - Description Cutting level directly at the saw blade Heavy-duty grey cast iron steel construction Precision-guided aluminium sliding table, standard anodized finish Large support table guided on telescopic arm and adjustable lengthwise Extendable aluminium telescopic fence with professional flip stops, angle adjustable Parallel fence with quick clamping and fine adjustment Large worktable made from milled grey cast iron remains permanently flat Standard table extension and table widening enable easy handling of large workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-size saw unit made of cast iron is double-mounted on the table, guaranteeing stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with a scoring unit installed Equipment details: Double-trunnion saw unit - Large size, made of steel/cast iron - Positioned close to the saw blade, mounted on both sides for precision, smooth running, and durability - Height and tilt adjustable up to 45° via hand crank - Maximum cutting height even with scoring unit installed - Also available with scoring unit Telescopic fence - Extendable telescopic fence up to a max. of 2550 mm - Angle adjustable - With professional flip stops Aluminium sliding table - Proven ball contact system - Resistant to dust and dirt due to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on guideway wear Parallel fence with round bar guide - With fine adjustment and quick clamping - Sturdy round bar guide made of ground steel, 45 mm diameter - Standard fold-down feature for cutting large workpieces Technical data: Dimensions and weights Weight (net) approx. 380 kg Dust extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated operating mode S6 Current type AC Duty cycle drive motor 40 % Mains frequency 50 Hz Sliding table and worktable Sliding table length 2250 mm Itsdpfx Aevyuqfjg Rod Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscut width left of saw blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilting 90 - 45° Saw blade speed 4000 rpm Art. No. 5504323

Kondisi: baru, Ideal for demanding craftsmen and joiners. The extra-long, one-piece surfacing tables allow for easy straightening of workpieces. The work tables are made of cast iron, ensuring high durability and permanent flatness. Rearward, simultaneous opening surfacing tables with tension spring support enable quick and convenient changeover. Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during changeover, saving valuable working time. The helical-toothed steel infeed roller ensures constant and uniform wood feed. Rubber outfeed roller at the thicknesser exit ensures even wood removal. Material feed with four speeds. Thicknesser table adjustment via handwheel with integrated height gauge. DIGITAL version: with electric height adjustment for the thicknesser table and digital display. On/off switch in operator position. Powerful industrial motor. High machine weight ensures maximum precision and smooth running. Pre-equipped for slot mortising attachment. Quality made in Italy. TECHNICAL DATA Dimensions and Weight Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net Weight: approx. 695 kg Surfacing Total table length: 2250 mm Max. planing depth (surfacing): 5 mm Planer fence length: 1200 mm Planer fence height: 150 mm Extraction Connection Extraction port diameter thicknesser: 1 x 120 mm Installation Information Required Length: 2250 mm Required Width/Depth: 1440 mm Note: Dimensions consider maximum travel paths or usable lengths. Thicknesser Thicknessing table length: 520 mm Thicknessing table width: 850 mm Minimum working height: 3 mm Maximum working height: 240 mm Minimum working length: 220 mm Max. planing depth (thicknesser): 5 mm Electrical Data Main drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterblock Type: TERSA Itjdpfx Agsvwflbo Rjd Cutterblock diameter: 120 mm Number of knives: 4 pcs Cutterblock speed: 5000 rpm Max. planing width: 520 mm Feed Feed speed: 5/8/12/18 m/min SCOPE OF DELIVERY Surfacing fence with round bar guide 4 feed speeds Tersa cutterblock Manufacturer no. 5503501

Kondisi: baru, en-GB - NEW - - Equipped with TERSA cutterhead for blade changes in seconds - TERSA planing knife system ensures exceptionally quiet operation - Helically serrated steel infeed roller for constant and uniform wood feed - Extra-long one-piece surfacing tables for easy planing of workpieces - Large parallel fence remains in position when opening the surfacing tables - Surfacing tables open to the rear - High machine weight ensures maximum precision and smooth operation - Powerful industrial motor - Robust steel/grey cast iron construction - Work tables made of grey cast iron, stress-relieved and annealed for lasting flatness and durability - Table lips for quiet operation Features TERSA cutterhead - No more adjusting or screwing - Blade changes in seconds - Self-locking mechanism - Especially quiet operation - Perfect planing results Extraction hose connection - Extraction ports for both surfacer and thicknesser face the same direction - Hose connection from one side only - No hose required around the back of the machine Drive - Sturdy chain drive - Drive wheels made of steel - Heavy-duty grey cast iron bearing block Cutterblock - Heavy-duty anti-kickback devices to prevent material kickback - TERSA cutterblock with three knives for optimal surface finish Material feed - Helically serrated steel infeed rollers for constant and uniform material feed without marking Iedevwgaajpfx Ag Retd - Multiple teeth engage simultaneously for powerful feed - Maintenance-free compared to rubber feed rollers Technical data: Length: approx. 1725 mm Width/Depth: approx. 880 mm Weight: approx. 270 kg Maximum planing depth (surfacer): 4 mm Extraction port diameter (thicknesser): 2 x 120 mm Minimum thicknessing height: 3 mm Maximum thicknessing height: 230 mm Maximum planing depth (thicknesser): 4 mm Drive motor power: 4 kW Connection voltage: 400 V Frequency: 50 Hz Cutterblock type: TERSA Number of knives: 3 Speed: 5200 rpm Maximum planing width: 300 mm Feed speed: 7 m/min Art.-No. 5503031 Stock location: 97447 Gerolzhofen - free loaded -

Kondisi: baru, - Maximum equipment configuration for professionals with Tersa cutterhead. - Ideal for demanding craftsmen and joiners. - Extra-long surfacing tables allow for easy straightening of workpieces. - Work tables are made of cast iron, making them resistant and permanently flat. - Rearward, simultaneously opening surfacing tables allow for short setup times. - Helically serrated steel infeed roller ensures consistent and even wood feed. - Rubber outfeed roller at the thicknesser exit ensures uniform wood extraction. - Material feed with four speeds. - Thickness table adjustment via handwheel with numerical height display. - TERSA planer knife system allows for tool-free knife changes in seconds and particularly quiet operation. - The large surface fence (1,200 mm x 150 mm) remains in place when opening the surfacing tables. - The high machine weight ensures maximum precision and smooth operation. - Prepared for mortising attachment. Digital version with electric thickness table adjustment. Technical Data Total length of tables: 2,250 mm Working width: 520 mm Max. planing depth: 5 mm ---Thicknesser Technical Data--- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. working length thickness: 220 mm Feed speeds: 5/8/12/18 m/min Cutterhead diameter/blades: 120 mm / 4 pcs. - Ideal for demanding craftsmen and joiners - Especially long one-piece surfacing tables enable easy straightening of workpieces - Work tables made from cast iron, thus resistant and permanently flat - Rear-opening, simultaneously lifting surfacing tables with spring assistance for quick and convenient changeovers - Thanks to the fixed dust extraction hood, there is no need to switch the extraction hose during changeovers, saving valuable working time - Helically-toothed steel infeed roller ensures consistent and uniform wood feed - Rubber outfeed roller at the thicknesser exit ensures uniform wood extraction - Material feed with four speeds - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: with electric thickness table height adjustment and digital display - Start and stop switch in operator position - Powerful industrial motor - High machine weight ensures highest precision and smooth running - Prepared for mortising unit Technical Data Dimensions and Weights Length (product): approx. 2,250 mm Width/depth (product): approx. 1,370 mm Weight (net): approx. 695 kg Surfacer Total table length: 2,250 mm Max. planing depth, surfacer: 5 mm Surface fence length: 1,200 mm Surface fence height: 150 mm Extraction Connection Extraction port diameter, thicknesser: 1 x 120 mm Installation Information Space requirement length: 2,250 mm Space requirement width/depth: 1,440 mm Space requirement explanation: Dimensions take into account maximum travel ranges or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Isdsvwd U Ispfx Ag Rjtd Min. working height thickness: 3 mm Max. working height thickness: 240 mm Min. working length thickness: 220 mm Max. planing depth thickness: 5 mm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Line frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 pcs. Cutterhead speed: 5,000 rpm Max. planing width: 520 mm

Kondisi: baru, – New – Description: - TERSA quick-change system for blade changes within seconds - Four-knife cutterblock for optimal planing results - Smooth operation thanks to precision assembly and heavy cast-iron construction - Long jointer tables for precise jointing - Robust jointer tables made from ribbed, stress-relieved, milled grey cast iron; durable, distortion-resistant, and highly resistant to wear - Large, sturdy aluminum fence with round bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° Itsdpjvwf Hrsfx Ag Red - Supplied as standard with auxiliary fence - Powerful 5.0 kW industrial motor - Stable steel and cast iron construction - Slot mortising unit retrofittable Length (product): approx. 2250 mm Width/depth (product): approx. 1370 mm Weight (net): approx. 465 kg

Kondisi: baru, - NEW - Description With TERSA cutterblock for change of planer knives in seconds The TERSA planer knife system enables particularly quiet operation Helically toothed steel infeed roller for constant and uniform wood feed The particularly long jointer tables, made from a single piece, allow for easy planing of workpieces Large planer fence can remain in position when opening the jointer tables Jointer tables open to the rear The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction. Work tables made from stress-relieved, annealed cast iron: durable, resistant, and permanently flat Table lips for quiet operation Equipment Details: TERSA planer cutterblock No more adjusting or screwing Knife change in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for jointing and thicknessing face in the same direction. Hose connection is from one side only. No hose needed to reach around the machine. Drive Sturdy chain drive design Drive wheels made of steel Massive cast iron bearing block Planing unit Heavy-duty anti-kickback fingers prevent workpiece kickback TERSA cutterblock with three knives ensures the best possible planing pattern Material feed Helically toothed steel infeed rollers provide constant and uniform material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Technical Data: Dimensions and Weights Length (Product): approx. 2015 mm Weight (Net): approx. 330 kg Width/Depth (Product): approx. 990 mm Drive Power Drive motor power: 5 kW Jointer Total table length: 1800 mm Max. cutting depth (jointer): 4 mm Working height: 900 mm Extraction Connection Extraction port diameter (thicknesser): 2 x 120 mm Installation Information Space requirement, length: 2015 mm Machine body width/depth: 596 mm Space requirement, width/depth: 1460 mm Working area, length: 1000 mm Space Requirement Explanation Dimensions account for maximum travel or usable lengths. Working area, width/depth: 3500 mm Machine body length: 659 mm Working Area Explanation Add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. Thicknesser Thickness table length: 605 mm Max. workpiece height (thicknesser): 230 mm Thickness table width: 420 mm Max. cutting depth (thicknesser): 4 mm Min. workpiece height (thicknesser): 3 mm Electrical Data Connection voltage: 400 V Current type: AC Phase(s): 3 Ph Network frequency: 50 Hz Planer Cutterblock Cutterblock type: TERSA Cutterblock speed: 5200 rpm Cutterblock diameter: 72 mm Max. planing width: 410 mm Number of knives: 3 pcs Feed Feed speed: 7 m/min Scope of Delivery Iodpovwga Hofx Ag Rjtd TERSA cutterblock Anodised aluminium planer fence No. 550 3414

Kondisi: baru, en-GB: - New - Description: - For sawing, milling, surfacing, thickness planing and, optionally, slot mortising Iodpevwf Enefx Ag Rotd - The work tables are made of heavily ribbed cast iron and the base frame is constructed from welded steel, ensuring torsional rigidity and vibration-free operation - Unique in this performance class: smooth-running anodised aluminium sliding table with ball contact system - Tilting saw blade from 90° to 45° - Table extension with degree scale and aluminium cross-cut fence for miter cuts on panels and large workpieces - Planer unit with TERSA quick-change system featuring three planer knives - Helically toothed steel feed roller for constant workpiece feed during thickness planing - Curved cutter guard for profile milling, standard with fine adjustment - Milling unit with two speeds - Independent drive motors for all units - Quality Made in Italy Technical Data: Dimensions and Weights Net weight approx. 245 kg Surfacing Surfacing table width 300 mm Surfacing table length 1200 mm Saw/surfacing fence tilt angle 90/45° Max. planing depth surfacing 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Note on required space: The dimensions take into account maximum travel paths or usable lengths. Thicknessing Thickness table length 450 mm Thickness table width 300 mm Min. working height thicknessing 3 mm Max. working height thicknessing 200 mm Max. planing depth thicknessing 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Drive motor duty cycle S6 Drive motor duty cycle 40% Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Milling Spindle Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle length 75 mm Spindle speed(s) 5000 – 7500 rpm Max. Milling Tool Diameter Max. tool diameter 160 mm Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Planer Cutter Block Planer block type TERSA Planer block diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with parallel fence 540 mm Max. cross-cut width left of saw blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer cutter block - Anodised aluminium sliding table - Multi-function fence for parallel cuts and surfacing - Table extension with cross-cut fence and fence jaw - Eccentric clamping arm Item no.: 5500030

Kondisi: baru, - NEW - Manufacturer: Holzkraft Model: FS 41 elite S Tersa Digital Iedevwgc Ujpfx Ag Rotd Digital version with motorized thicknessing table adjustment - Planer knife system enables tool-free, rapid knife changes and exceptionally quiet operation - Extra-long jointer tables (2200 mm) made from a single piece for easy surfacing of workpieces - Worktables are made of stress-relieved, annealed cast iron for optimum stability and long-term flatness - Simultaneous table opening - Rearward-opening jointer tables for minimal setup times - Powerful industrial motor - Fixed extraction hood - Robust steel/cast iron construction - Simultaneous table opening - Large fence (standard with auxiliary fence) - Material feed with two speeds via separate motor Technical Data: Total length of tables: 2200 mm Working width: 410 mm Max. depth of cut: 5 mm Thicknessing: Dimensions of thicknessing table: 775x410 mm Min/max. working height: 3/240 mm Feed speeds: 6/12 m/min Cutterblock diameter/knives: 95 mm/4 pcs Speed: 5000 rpm Motor: 400 V/50 Hz/S6 - 40% 5.0 kW (6.6 HP) Extraction port diameter: 1 x 120 mm Weight: 450 kg Item no.: 550 3441 Location: 97447 Gerolzhofen - loaded free of charge -

Kondisi: bekas, Tahun pembuatan: 2006, including 2nd sanding shoe Used, top configuration Manufacturer: SCM Samco Model: EG 2500 Year of manufacture: 2006 Machine No.: AM/28506 Motor: 3.0 / 2.2 kW Sanding length: approx. 2500 mm Sanding width: approx. 1000 mm Belt length: approx. 6800 mm Table size: approx. 2500 mm x 1000 mm Throat (right): approx. 700 mm Throat (left): approx. 700 mm Electric adjustment Upper belt cover Upper sanding pad Belt speeds: 1,400 / 2,800 rpm = 23 m/sec / 46 m/sec Reversible belt run (right-left) Extraction port Ø 160 mm Space requirement: approx. 3900 mm x 1700 mm x 1500 mm Total connected load: approx. 4.55 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee Itedpfx Aevwffbog Rod

Kondisi: baru, - New - Description: - Premium features for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10” touchscreen: HMI Maestro Active Edge, graphical representation of all processing units and their operating status, graphical simulation of all machining operations, control of all units, regulation of glue pot temperature, assistant functions for machine setup according to the machining program, error diagnostics for quick troubleshooting of simple faults, processing parameter statistics, USB port, prepared for network connection, ready for Industry 4.0 with API REST data transfer protocol. - Excellent accessibility to the working units thanks to the large hood, which ensures both protection and noise reduction. - Monoblock steel construction provides high machine stability and rigidity. - Automatic unit positioning when changing panel thickness. - Automatic application of edge strips with edge magazine (me 35 t s): solid wood edge strips are loaded automatically and synchronized with panel feed. - Panel feed via feed chain with rubber glide shoes. - Extendable workpiece support. - Infeed fence adjustment via spacer plates. Technical Data: Dimensions and Weight Length approx. 3314 mm Height approx. 1300 mm Width/Depth approx. 1085 mm Weight approx. 545 kg Flush Radius Trimming Unit Motor power: 2 x 0.35 kW Cutter speed: 12,000 rpm Cutter diameter carbide-tipped: 55.3 mm Extraction port diameter: 2 x 60 mm Itodpfx Agovwfmlj Rod Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot power: 0.25 kW Extraction port diameter: 60 mm Operating temperature: 190 °C Fill capacity: 0.8 kg Pneumatics Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edge Material Edge thickness, roll material: 0.4 – 3.0 mm Edge thickness, strip material: up to 5.0 mm Pre-milling Unit Motor power: 3 kW Diamond cutter diameter: 80 mm Material removal: 0.5 / 2 mm Cutter speed: 7,200 rpm Cutter height: 56 mm Extraction port diameter: 2 x 80 mm Scraper Units Radius scraper 2 mm Buffing Unit Motor power: 2 x 0.14 kW Speed: 2,800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item No. 5507235

Kondisi: baik (bekas), max working width of element 230 mm max working height of element 130 mm 6 spindles: 1) bottom horizontal 230 mm 5.5 kW 2) right vertical 130 mm + 3) left vertical 130 mm; (spindles 2 and 3) 11 kW 4) top horizontal 230 mm 7.5 kW Itsdsrqzvcepfx Ag Red 5) bottom horizontal 230 mm 7.5 kW 6) universal 230 mm, adjustable through 360° 7.5 kW

Tahun pembuatan: 2014, Kondisi: hampir baru (bekas), "EASY PLUS" electronic control from the control panel, 2 axes: - Automatic control of the left vertical spindle and the upper horizontal spindle position. - Feed speed selection. - 7" color LCD display Min. working width (final dimension): 25 mm Max. working width (final dimension): 230 mm Min. working height (final dimension): 6 mm Max. working height (final dimension): 120 mm Min. length of a single workpiece: 450 mm Variable feed speed controlled by inverter: 5 - 25 m/min Pneumatic pressure on feed rollers Top feed roller in front of the jointer Feed motor power: 3 kW Jointer motor power: 5.5 kW Vertical spindle motor power (each): 11 kW Upper horizontal spindle motor power: 9 kW Spindle speed: 6000 rpm Spindle diameter: 40 mm Vertical spindle length: 140 mm Horizontal spindle length: 250 mm Vertical spindle axial adjustment relative to the worktable: 40 mm Horizontal spindle axial adjustment relative to the right fence: 40 mm Min./max. cutter diameter on jointer: 120 – 140 mm Min./max. cutter diameter on vertical spindles: 100 – 180 mm Max. profile height on vertical spindle: 40 mm Min./max. cutter diameter on upper spindle: 125 (100-180) mm Feed roller shaft diameter: 140 mm Feed table length: 2000 mm Quick adjustment of infeed table and fence: 10 mm Itedsh Nvt Ujpfx Ag Rsd Manual lubrication pump for the table STD

Kondisi: baru, Tahun pembuatan: 2025, Holzbearbeitungsmaschinen Table Router Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table carriage Large-dimensioned milling unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3,500 to 10,000 rpm Right/left rotation standard Height and tilt indication accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for long-term accuracy Powerful 5.0 kW industrial motor Curved milling guard included Made in Italy Dimensions and Weights Product length approx. 1200 mm Product width/depth approx. 2000 mm Net weight approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Iodpfxji Dphts Ag Retd Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required floor space (length): 2800 mm Required floor space (width/depth): 2910 mm Floor space explanation: The dimensions consider maximum travel or working lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working Area Working area length: 1600 mm Working area width/depth: 2300 mm Working area explanation: Please add the given dimensions to the required floor space to obtain the recommended free installation area for the machine. Electrical Data Connection voltage: 400V Mains frequency: 50Hz Drive motor power: 5.0 kW Spindle Spindle tilt: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED on machine front Spindle arbor diameter: 30 mm Maximum Milling Tool Diameters Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning diameter: 320 mm EQUIPMENT Equipment Aluminum sliding table carriage: ✔ Milling fence: Heavy-duty professional version with hold-down clamp, protective cover, and aluminum fence jaws Telescopic miter gauge: With two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Handle on sliding table carriage: ✔ Spindle height adjustment: Manual Spindle tilt adjustment: Manual Control: Manual height and tilting adjustment of the milling unit Control element position: On machine body Location: Available from stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Electrically adjustable thicknessing table with two speeds Numerical display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical gearing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planer cutterblock Knife change in seconds When starting the machine, centrifugal force automatically tensions the planer knives – self-locking The knife projection is set automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfectly stable without locking Helical-toothed steel feed rollers ensure constant and uniform wood infeed Second, rubber-coated outfeed roller Robust anti-kickback devices prevent workpiece kickback A 4-knife cutterblock guarantees optimal planing results Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Extraction port diameter thicknesser 150 mm Drive power Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation The dimensions take into account maximum travel or working lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area Add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknesser table Thicknessing table length 630 mm Thicknessing table width 1000 mm Working height min. 3.5 mm Working height max. 300 mm Working length min. 210 mm Max. cutting depth 8 mm Electrical data Connection voltage 400 V Phase(s) 3 ph Iedpfx Aeff Efasg Rstd Current type AC Network frequency 50 Hz Planer cutterblock Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 4500 rpm Max. planing width 630 mm Feed Speeds 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise and chip protection curtains at the workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa planer cutterhead Planer knife change in seconds When the machine starts, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles that guarantee maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains precise even without mechanical locking Helically-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust Extraction Connection Extraction port diameter (thicknessing) 150 mm Drive Power Main motor 7.5 kW Installation Information Required space – Length 1170 mm Required space – Width/Depth 1003 mm Required space – Height 1197 mm Note on required space: The dimensions take maximum travel paths or usable lengths into account. Ijdpfx Ajd Hx E Ieg Retd Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Note on working area: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Table Length 520 mm Width 1000 mm Minimum working height 3.5 mm Maximum working height 250 mm Minimum working length 210 mm Maximum chip removal 8 mm Electrical Data Connection voltage 400 V Planer Cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 4500 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Kondisi: baru, Tahun pembuatan: 2026, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside. High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° backwards into the fence. Four spindle speeds. Forward and reverse rotation of the spindle moulder. Quick changeover to thicknesser thanks to parallel-opening jointer tables. 2-speed feed on the thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Supplied with a separate rip fence and separate jointer fence. Lockable main switch. Equipment details: Format fence Instant control Outrigger Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Guides riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty against wear on the hardened guideways. Grey cast iron double-trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Mounted close to the saw blade, supported on both sides. Height and tilt adjustable up to 45°. Scoring unit with separate 0.55 kW motor as standard. Double-trunnion moulder unit Large, tilting double-trunnion spindle moulder unit made of grey cast iron. Spindle fence Heavy-duty professional design. The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard. Three-way positionable for rapid return to preset settings. Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws. Planer units Helical-toothed steel infeed rollers for constant and uniform wood feed. Heavy-duty anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterhead ensures an optimal finish. Table lips for quieter operation. Tersa planing knife shaft No setting or screwing required. Knife changes in seconds. Self-locking. Particularly quiet operation. Thickness table The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions. Special lifting mechanism keeps the table position stable even without locking. Parallel fence With fine adjustment and quick clamping. Robust round bar guide made of ground steel. Exchangeable aluminium rule. No measuring gap; guide rods overlap. Separate jointer fence Large professional design (1800 x 150 mm), tiltable 0-45°. Quick adjustment. Robust round bar guide made of ground steel. Simultaneous opening Itodpfx Ascnxa Sog Rsd Model No. 5500557

Kondisi: baru, Tahun pembuatan: 2025, Dimensions and Weights Length approx.: 2,000 mm Width/Depth approx.: 1,110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1,034 mm Maximum Planing Depth: 5 mm Dust Extraction Connection Extraction Port Diameter, Thicknessing: 2 x 120 mm Thicknessing Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Planing Depth: 5 mm Electrical Data Main Motor Power: 5 kW Supply Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5,200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures exceptionally quiet operation. Helically serrated steel infeed rollers for consistent and even material feed. Material feed with two selectable speeds. Digital height display for thicknessing table. 2,000 mm long jointing tables for easy processing of large workpieces. Work tables made of cast iron, annealed and stress-relieved, making them resistant and permanently flat. Stable, large aluminium jointer fence with round bar guide (1,200 x 160 mm). Height adjustment for thicknessing table via handwheel with digital height display. The high machine weight guarantees maximum precision and smooth operation. Powerful industrial motor. Robust steel and cast iron construction. Equipment Details Jointer Fence - Stable, large aluminium jointer fence (1,200 x 160 mm) - With precise round bar guide Dust Extraction Hose Connection - Extraction ports for jointer and thicknesser face the same direction during both operations. - The extraction hose can thus be connected from the same side for both planing modes. No need for a hose going around the machine. Planer Head - Helically serrated steel infeed rollers for consistent, even material feed - Heavy-duty anti-kickback devices prevent kickback of large workpieces - 4-knife cutterblock for optimal planing results Chain Drive - Rugged chain drive concept - Drive wheels made of steel - Massive cast iron bearing block Two Feed Speeds - Standard with two feed speeds - Conveniently selectable from the operator’s side Material Feed - Helically serrated steel infeed rollers for consistent, even feed without indentations - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Thicknessing Table Adjustment - Adjustment via handwheel - Digital height display accurate to 0.1 mm Iedpfx Agehkz E Ts Retd Tersa Cutterhead - No adjustment or screwing required - Knife changes within seconds - Self-locking - Exceptionally quiet - Perfect planing results Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2025, Stable cast iron and steel construction Large, heavy-duty milling unit made of cast iron, tiltable up to -45° to the rear Milling speeds displayed via LEDs Quick and effortless speed change using eccentric clamping Reversible rotation (clockwise/counterclockwise) Height and tilt display with 0.1 mm accuracy Heavy-duty professional milling fence: featuring rack-and-pinion fine adjustment, numeric display, aluminum fence jaws, can be positioned in three ways for rapid repetition of settings TECHNICAL DATA Extraction Connection Extraction port diameter 2 x 120mm Work Table Table length 2500mm Iedpfx Asiidnfjg Rstd Table width 655mm Electrical Data Supply voltage 400V Mains frequency 50Hz Motor power output 5.0kW Milling Spindle Spindle tilt 0 to -45° Usable spindle length 125mm Spindle speeds 3500/6000/8000/10000 rpm Spindle shaft diameter 30mm Max. Cutter Diameter Max. tool diameter 240mm Max. retractable tool diameter 230mm Max. profile milling tool diameter 210 – 240mm Max. tenoning cutter diameter 320mm SCOPE OF DELIVERY Aluminum milling fence jaws Curved milling guard hood Motorized height- and tilt-adjustable milling spindle Digital display of set values Speed indication via LED display on the machine front Table extension left and right Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, en:Tischfräse minimax twf 55 es M 3 UP Professional joinery machine with motorized height and tilt adjustment of the milling spindle, four speeds, and electronic control system Article Number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminum sliding table ✔ Handle on sliding table ✔ Milling fence FLEX ONE: Heavy-duty professional design, automatic adjustment of the entire milling fence according to tool diameter, manual chip removal adjustment, fence swiveling device, aluminum fence jaws with connecting rails Spindle height adjustment motorized Telescopic mitre fence with two flip stops Spindle tilt adjustment motorized Supporting table ✔ Control system Ready 3: Programmed movement of the milling unit in two axes, automatic adjustment of the entire milling fence based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Positioning of control elements Operator panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and Weights Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Suction port diameter 2 x 120 mm Work Table Table length 1200 mm Sliding table length 1200 mm Table width 530 mm Sliding table width 360 mm Table height 900 mm Sliding table height 142 mm Setup Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Explanation of space requirement: The dimensions include maximum traversing paths or usable lengths. Working area width/depth 2300 mm Iedpfx Aohp Rc Ieg Rjtd Machine body length 1200 mm Explanation of working area: Add the listed dimensions to the space requirement to determine the recommended free floor area for the machine. Electrical Data Supply voltage 400 V Drive motor power 5.0 kW Mains frequency 50 Hz Milling Spindle Spindle tilt 0 to -45° Milling spindle speed display Control system display Usable spindle length 125 mm Spindle shaft diameter 30 mm Spindle speeds 3500/6000/8000/10000 rpm Milling Tool Diameter (Max.) Maximum tool diameter 240 mm Maximum profiling cutter diameter 240 mm Maximum retractable tool diameter 230 mm

Kondisi: baru, Tahun pembuatan: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum format sliding table and three spindle speeds for sawing, milling, surface/thickness planing, and optional slot mortising. Features: - Torsion-resistant steel/cast iron construction - Machine table made of cast iron, hardened and ground - Smooth-running anodized aluminum format sliding table, 10-year warranty on guideways wear - Large crosscut frame with extendable aluminum telescopic fence and flip stops - Combination saw jointer fence with 45° quick adjustment - Max. saw blade diameter: 315 mm with optional scoring unit, tiltable 90°-45° - Helical-toothed steel feed roller for uniform wood feed during thickness planing - Four manually adjustable spindle speeds - Standard with forward/reverse spindle rotation Itedpfx Agscnxa Ne Red - Three independent motors for each working unit Scope of delivery: - Combination surface/parallel fence - Curved milling guard hood - Tersa cutterblock - Anodized aluminum format sliding table - Aluminum fence jaws - Flip stops - Eccentric clamp arm Model: LAB 300 PLUS F 16 Tersa Item no.: 5500314 Technical Data --- Panel Saw --- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100 / 79 mm Max. crosscut width left of saw blade: 1660 mm Rip capacity at rip fence: 800 mm Saw arbor speed: 3500 rpm Saw blade tilting: 90° - 45° --- Surface planer --- Working width: 300 mm Planer table length: 1260 mm Cutterblock diameter / no. of knives: 72 mm / 3 pcs --- Thickness planer --- Table size: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. chip removal: 4 mm Feed speed: 7 m/min --- Spindle moulder --- Usable spindle length: 100 mm Max. tool diameter (recessed): 180 mm Max. tenoning tool diameter: 275 mm Max. tool diameter recessed: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor power 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a ball contact system proven millions of times Permanently easy-running thanks to hardened and ground guides Not susceptible to dust and dirt due to minimal contact area between ball and rail 10-year Holzkraft warranty against wear on the HM-guideways Extraction Hose Connection The extraction ports of the surface planer (1) and thickness planer (2) point in the same direction. This allows the extraction hose to be connected from the same side for both planing operations. You do not need a hose running around the machine. Planer Units - Helically toothed steel feed rollers for constant and uniform wood feed - Massive anti-kickback fingers prevent workpiece kickback - 3-knife cutterblock ensures optimal planing results.

Kondisi: baru, Tahun pembuatan: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and cabinetmakers The especially long, one-piece jointer tables allow for easy straightening of workpieces Work tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening jointer tables with spring-assisted support for quick and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose during machine conversion, saving valuable working time Helically toothed steel infeed roller ensures a constant and uniform material feed Rubber outfeed roller at the end of the thickness planer guarantees even wood extraction Material feed with four speeds Planer thickness table adjustment via handwheel with integrated height display DIGITAL version: with electric thickness table height adjustment and digital display On/off switches positioned for operator convenience Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit installation Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length: 2250 mm Maximum cutting depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Explanation on space requirements: Dimensions take into account maximum travel distances or working lengths. Itjdpfxeff Hdpj Ag Rsd Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Working length min.: 220 mm Maximum cutting depth: 5 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Line frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Kondisi: baru, Tahun pembuatan: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodized aluminium sliding table Rigid steel/cast iron construction Large support surface and precision cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with up to 2660 mm extendable aluminium telescopic fence with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Robust saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3500 to 10000 rpm Spindle moulder with reversible rotation Standard arching cutter guard Safety reversing fence jaws made of aluminium Two motors with high performance reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx.: 470 kg Extraction connection Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Electrical data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Mains frequency: 50 Hz Ijdpfxshp Rdle Ag Retd Spindle moulder Spindle tilt: 0 – -45 ° Useful spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter not retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular saw unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2660 mm Saw blade tilt: 90 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 78 mm (Main) saw blade diameter: 315 mm Remark (main) saw blade diameter: independent of scoring blade (Main) saw blade speed: 4000 rpm Sliding table and table Table length: 1112 mm Table width: 430 mm Scope of delivery: Arching cutter guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, Beschreibung Technische Daten Lieferumfang Zubehör Ausstattungsoptionen Ideal for demanding craftsmen and joiners The especially long, one-piece surfacing tables enable easy jointing of workpieces Work tables are made of cast iron, making them robust and permanently flat Rearward, simultaneously opening surfacing tables with spring assistance for fast and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time Helically-toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing table exit ensures uniform wood outfeed Material feed with four speeds Thicknessing table adjustment via handwheel with integrated planing height display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for slot mortising device Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Surfacing Total length of tables: 2250 mm Maximum depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknessing extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation Information Required space – Length: 2250 mm Required space – Width/Depth: 1440 mm Space requirement explanation: Dimensions take into account maximum travel distances or usable lengths. Thicknessing Thicknessing table length: 520 mm Thicknessing table width: 850 mm Minimum working height: 3 mm Maximum working height: 240 mm Minimum working length: 220 mm Maximum depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Iedpfoff Hdmjx Ag Rstd Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, en Iodpfx Agodqzh Te Retd