Beli Screw Feeder bekas (8.459)

Kondisi: bekas, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibratory bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter at bottom: 300 mm Bowl diameter at top: 350 mm Bowl inner height: approx. 25 mm Dodpfxjuzn Nno Abhscc Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - The feeder was used for supplying automotive blade fuses Required space (D x H): 420 x 390 mm Weight of spiral feeder: 52 kg Linear Feeder / Vibratory Feeder / Sorting Device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SLL 400-400 Serial No.: 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Usable load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Power supply: 220 V, 50 Hz - Oscillation plate (L x W x H): 400 x 65 x 12 mm - Mounted rail length: 530 mm - Installation height with oscillation plate: 145 mm Required space (L x W x H): 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control Unit for Vibratory Drives, Regulator, Controller for Vibratory Feeders / Sorting Device / Spiral Feeder / Vibratory Bowl / Vibratory Conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Model: ESK-N80 / ESG 90 Power supply: 0 ... 208 Veff (230VAC in motor operation) with 230V mains voltage 0 ... 98 Veff (115 VAC in motor operation) with 115V mains voltage Output voltage: 0...208 V (eff.) adjustable (230V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - external enable input 24V DC Required space (L x W x H): 260 x 190 x 140 mm Weight of controller: 3.6 kg All devices tested and in good condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Brabender Dosing Screw Ganda bekas, Tipe DDW-H21-M-DDS20-50R Dsdpfx Asyfm Spsbhjcc • Tahun pembuatan: 1993 • Rentang kapasitas: 5 – 50 kg/jam • Pengaduk/agitator/unit paddle terintegrasi dalam hopper (seperti terlihat di foto) • Hopper stainless steel • Ulir kembar Dosing unit dalam kondisi baik, lengkap dan siap pakai. Ideal untuk bubuk, granul, dan bahan curah yang sulit mengalir.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Dosing feeder dengan double screw (volumetrik), kondisi seperti baru Seperti terlihat pada foto, perangkat ini dilengkapi dengan: • Double screw dengan diameter sekitar 45 mm • Paddle mixer terintegrasi (agitator) di dalam hopper • Hopper berbentuk persegi panjang dengan insert stainless steel • Digerakkan oleh motor listrik 0,55 kW Djdpeyfm Epsfx Abhecc Dosing feeder dalam kondisi hampir baru dan sepenuhnya berfungsi. Ideal untuk bubuk, granul, atau material curah yang sulit mengalir.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kecepatan rotasi (min.): 38 rpm, kecepatan rotasi (maks.): 38 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 1.200 kg, panjang total: 5.000 mm, lebar total: 600 mm, Auger conveyor, screw conveyor 500x4000mm Direct drive Total length: 4000 mm Trough width: 500 mm Dcedsudk Sbjpfx Abhec Auger material: steel Drive motor: SEW-EURODRIVE Motor power: 5.5 kW Voltage: 400V Protection class: IP55 End bearing, robust cast-iron housing

Kondisi: bekas, Diameter ulir: 35 cm Panjang: 385 cm Ukuran keluaran: 45 cm x 33 cm Dsdpfx Ajxz R Raebhjcc Lebar pengisian: 217 cm Tinggi pengisian: 175 cm

Kondisi: siap digunakan (bekas), Alat pengumpan bubuk, konveyor sekrup, blender sekrup, mesin bekas Dimensi: 855 x 720 x 810 mm Ukuran wadah: 600 x 500 x 800 mm Data listrik: 230/400 V; 0,43 kW; 50/60 Hz Dcedpfew Tt S Eex Abhec Konveyor sekrup memiliki desain bearing ganda dan dilengkapi dengan penutup yang terbuka karena aliran material.

Tahun pembuatan: 2014, Kondisi: seperti baru (mesin pameran), PSS SM 700 + PSS G 250 A Dcjdoifpl Iopfx Abhsc ID.NO. 2336 PSS SM-700 l paddle mixer, year of manufacture 2014, complete with PSS G 250 A screw conveyor from 2016. Full package in excellent condition. Mixer dimensions: D 230 cm x W 125 cm x H 235 cm. Screw conveyor dimensions: D 140 cm x W 125 cm x H 250 cm.

Tahun pembuatan: 2018, Kondisi: baik (bekas), Hethon 71 Hopper und Schneckenförderer 2018, Edelstahl, 100 kg Trichter und Auslaufschnecke, Schneckendurchmesser 60 mm, 3-Phasen, zwei Stück auf Lager Dcodpfow Dg Ipjx Abhjc

Tahun pembuatan: 2016, Kondisi: baik (bekas), Hethon 51 Hopper und Schneckenförderer 2016, Edelstahl, 50 kg Vorratsbehälter und Austragsschnecke, Schneckendurchmesser 40 mm, 3-Phasen-Anschluss, vier Stück auf Lager Dedpfx Abew Dg Ucohjcc

Tahun pembuatan: 2016, Kondisi: baik (bekas), Hethon 61 Trichter und Schneckenförderer Dsdjw Dhdfjpfx Abhecc 2016, Edelstahl, 100-kg-Trichter und Austragsschnecke, Schneckendurchmesser 60 mm, 3-Phasen-Anschluss, zwei Stück auf Lager

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Böllhoff Uniquick Vario Screw Feeding Automation System UNIQUICK Feeder Type 360 Plastic Sorting Bowl Ø 360 mm Quiet and gentle part conveying Optimally dimensioned helical track according to the characteristics (width and height) of the components Integrated and controlled sorting baffle High wear resistance Consistent feed rates via amplitude control Mounted in sound-insulated housing on a frame Track width: 20 mm Connection element head Ø up to 20 mm Connection element length up to 55 mm Fill volume: 3 l SIM BB-10-C (ws) Belt Hopper Hopper tray, chute: Stainless steel Belt: white with FDA approval Fill volume: 10 liters Maximum fill weight: 35 kg Drive: AC gear motor 230V / 50Hz Hopper features innovative drive technology for accurate, quiet, and part-friendly feeding of screws and fasteners. UNIQUICK Multi Modular, expandable 3-way diverter Distributes inspected screws to three stationary screwdrivers Part Singulation Custom discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Noise insulation Screw feeding in plastic bowl Bowl lined with sound absorbing material Airtight pneumatic blow-in of screws Compressed Air Maintenance Unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions (HxWxD): 1050 x 650 x 650 mm Technical Data Dodpfx Abswbr N Hohscc More new and used items available in our shop! International shipping on request!

Kondisi: bekas, Vibratory feeder with pneumatic screwdriver stand Eco Line Vibratory feeder, sorting unit, bowl feeder, vibrating bowl, automatic screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of construction: 2003 Vibratory feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting rail width: 10 mm Power supply: 230 Volt, 50 Hz. Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for stepless vibration speed = stepless conveying speed - Vibrating bowl enclosed in protective housing - With pneumatic feed system - Feed impulse triggered by external electrical control - The feeder was used to feed M5 x 12 mm screws - Some pneumatic hoses need to be replaced - PLC control Siemens S7-200 CPU 224 MISSING Required space vibrating bowl (L x W x H): 450 x 450 x 315 mm Weight vibrating bowl: 32 kg Screwdriver stand WEBER Eco Line Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Main stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, type probably DZF-32-30-P-A-SM - Screwdriver traverse on linear guide - 3 position sensors on the cylinders Dedpfxsxf Up Uj Abhocc - Pressure switch Festo - Pneumatic valve Bosch Dimensions screwdriver stand (W x D x H): 200 x 410 x 1050 mm Weight screwdriver stand: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see photo of electrical cabinet without PLC control), thus automatic operation is not possible in the current condition. The controller also managed the screw singulation process and the screwdriver itself. The vibrating bowl is fully functional even without PLC control; the built-in bowl controller does not require PLC signal. Process: Fasteners are filled into the bowl as bulk material and are moved upwards by the mechanical vibration of the bowl (micro-throw principle). The vibrating bowl automatically switches on or off depending on the fill level in the screw magazine. The screws are then pneumatically conveyed via a plastic hose to the downstream unit. The feed impulse for each individual screw is triggered externally by the downstream unit.

Kondisi: bekas, Feeding technology / Feeding system / Vibratory feeder / Sorting device / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw assembly technology Feeding system DEPRAG Type: 0622-P/0.75-1S No: 1183884 2011 - 2012 The system was used for feeding electrical connector contact pins. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the feed conveyor supplies the pins as needed to the bowl feeder. From the bowl feeder, with two sorting tracks, the pins are conveyed to the part turner. The part turner turns the product into the correct orientation and releases it for further processing. Dcjdpfx Abjh Ap Idohsc The unit comes from a prototype system; an external electrical control unit is not included and should be replaced by a PLC. Without modifications, for example, it is suitable for the automatic and correctly oriented feeding of threaded pins up to M4 x 26. The unit consists of the following components: 1 pc belt hopper / feed belt conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no.: 415050A Year of manufacture: 2011 Filling volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Napped belt surface - Folding stainless steel chute Weight: 11 kg 1 pc bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl inner height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Vibratory bowl with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Finished no.: 35 pc part turner FESTO with 180° swivel range - 1 FESTO valve block CPV10-GE-MP-8 - 1 FESTO valve block CPV10-VI - pneumatic special components (compressed air requirement approx. 6 bar) - 2 pcs MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirement L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Kondisi: bekas, Feeding technology / Feeding system / Vibratory conveyor / Sorting device / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory conveyor for screwdriving technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are stored in the material hopper, and the feeder belt conveys the pins as needed into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product turner. The product turner orients the product correctly and releases it for further processing. The unit comes from a prototype system; the external electrical control is not included and should be implemented via a PLC. Without modifications, the system is, for example, suitable for the automatic and correctly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feeder conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) Djdpfx Ajkpwuusbhocc - Belt surface dimpled - Foldable stainless-steel chute Weight: 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG vibratory controller for bowl feeder Type: SZG Controller 6 Serial no.: 35 1 piece linear feeder KENDRION Type: WS3B/36 Part no.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG vibratory controller for linear feeder Type: SZG Controller 6 Serial no.: 35 1 piece FESTO product turner with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Pneumatic supply approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support feet Space required (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Diameter: 1700 mm Dodpfxefd E R Aj Abhjcc Stainless steel

Kondisi: bekas, Wahli-Stream Feeder TM 530 adalah feeder andal yang dirancang untuk penanganan kertas yang efisien. Model ini diproduksi oleh Wahli di Jerman. Harga tersedia berdasarkan permintaan. Perangkat ini mendukung format A2 dan dirancang untuk meningkatkan produktivitas pada proses pencetakan dan finishing. Format: 360 x 420 mm Dcedpfx Asvphzpobhjc Perlengkapan: PENGUMPAN AMPLOP OTOMATIS (dengan penyedot vakum) COCOK UNTUK MESIN CETAK DENGAN FEEDER STREAM/SATUAN PENYESUAIAN VACUUM, TINGGI, DAN KECEPATAN KONVEYOR Ukuran amplop minimum: 7,6 x 12,7 cm Ukuran amplop maksimum: 36 x 42 cm

Kondisi: baik (bekas), Kompresor pendingin sekrup ABB SVA 24, dua unit lengkap Tahun pembuatan: 1991 Dibuat di Jerman Dcedpfx Aoyb Sdijbhoc Kondisi kerja baik

Kondisi: baru, Tahun pembuatan: 2023, jam operasional: 300 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 2.880 mm, daya motor spindle: 90.000 W, jenis arus masuk: tiga fasa, Dijual lini baru untuk compounding dengan kapasitas nyata 300kg/jam. Lini terdiri dari mixer panas dan dingin, ekstruder dua sekrup (2 twin screw extruder) dengan dua titik pengisian di awal sekrup dan di samping, sangat cocok untuk pengisian kering tingkat tinggi. Dilengkapi juga dengan pompa vakum, pengganti saringan hidrolik, meja vibrasi, dan silo untuk penyimpanan material. Dcsdpfx Absx Uqyqohoc Lini ini mampu memproses material bubuk, material keras, berbagai hasil gilingan, campuran, serta granulat PP, PE, PVC. Dapat memproduksi masterbatch, filler berkualitas tinggi, dan produk lainnya. Hingga 85% bahan kering. Mesin benar-benar baru, hanya dites beberapa jam saja. Kontrol menggunakan regulator frekuensi. Dilengkapi set suku cadang, pemanas cadangan, dan segmen sekrup cadangan. Tersedia opsi uji coba dengan material Anda sendiri.

Kondisi: siap digunakan (bekas), Bak stainless steel Dimensi: 1900 x 890 x 200 mm Djdox Hyp Ejpfx Abhjcc

Kondisi: bekas, Tahun pembuatan: 2009, Produsen: H&G Tipe: HG/SV 11 Berat: 1800 kg Dcedex Hyfyspfx Abhec Daya motor: 11 kW

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 41206972, WITH DELIVERY CONVEYOR Deflector Belts: For envelope size 10.5 cm x 14.8 cm and for portrait orientation, the deflector belts should be pushed toward the center conveyor belt. Rule: For large envelopes, push the deflector belts outward; for small envelopes, push the deflector belts (22) inward. CONNECTION TO PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Carry the feeder by its handles into the printing machine and adjust the required height using the handwheel. Important: Only after the print height is set, fix the rear rollers and check the stability. Switch on the machine and begin printing. For single sheet feeder printing machines (GTO), the feeder offers adjustable tilt. Trouble-free envelope printing can begin. Developed for tough operation at maximum printing speed. Compatible with all 36 x 52 printing presses regardless of the feeder system (overlapping/single-sheet feed). - Requires no mechanical modifications to the printing machine. - No synchronization settings required thanks to laser technology. - Very short set-up time enables economical use for runs as low as 1,000 envelopes. - Simple operation. - The feeder’s design enforces overlapping feed. Thus, the throughput of the Stenz Feeder is not limited. - Minimal wear parts ensure extremely long service life. - Approved in thousands of different printing machines. - A Swiss quality product. - Designed by printers for printers. Specifications: Speed: Limited by printing machine Length: 115 cm Dcjdpfx Ajxuhy Sebhsc Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Power: 230 V, 50 Hz

Kondisi: baru, Tahun pembuatan: 2026, Alle unsere Produkte werden mit Sorgfalt hergestellt und sind mit einer 1-Jahres-Garantie abgedeckt! *Montage und Bedienerschulung KOSTENLOS* • Modell: FABO HY-600 • Typ: Doppelwendel-Schneckenwäscher • Kapazität: 60 Tonnen pro Stunde • Abmessungen: 1400 x 6650 x 1800 mm • Schneckengröße: Ø 600 x 6000 mm • Drehzahl: 22 U/min Djdpfsxur Sfex Abhocc • Motor: 2 x 5,5 kW Schwerlast-Gamak • Wasserverbrauch: 55–205 m³ • Inklusive Fahrgestell, Motor und Schutzabdeckungen. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS GERNE!

Kondisi: baru, Tahun pembuatan: 2026, Alle unsere Produkte werden mit Sorgfalt hergestellt und sind mit einer 1-Jahres-Garantie abgedeckt! *Montage und Bedienerschulung KOSTENLOS • Modell: FABO HY-800 • Typ: Doppelwendel-Spiralwaschanlage • Leistung: 80 Tonnen pro Stunde • Abmessungen: 1750 x 8650 x 1900 mm • Schneckendurchmesser: Ø 800 x 8000 mm • Motor: 2 x 15 kW Schwerlastmotoren von Gamak • Wasserverbrauch: 65-230 m3 • Inklusive Fahrgestell, Motor und Schutzvorrichtungen. Dcjdpfx Aswclabjbhoc FÜR WEITERE INFORMATIONEN RUFEN SIE UNS GERNE AN!!!

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), Walter double saw with TRKS 200 feeder cutting height of the double saw: 200 mm, motor power: 40 kW. Chain feeder with controllers and adjustable prism for various diameters. Gearbox for adjustable feed rate. Dcsdpfx Abeh R Tvtohsc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Wahli Kuvertanleger (envelope feeder) Dedpfx Abeupmzqshjcc