Beli Shopturn bekas (54)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 600 mm, panjang pembubutan: 548 mm, diameter pembubutan: 460 mm, lubang spindel: 88 mm, kecepatan spindel (maks.): 3.400 rpm, kecepatan spindel (min.): 30 rpm, jarak pergerakan sumbu X: 310 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 620 mm, daya motor spindle: 24 W, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 10 m/menit, pergerakan cepat sumbu Z: 24 m/menit, kecepatan rotasi (min.): 30 rpm, kecepatan rotasi (maks.): 4.500 rpm, berat keseluruhan: 7.600 kg, diameter ayun di atas peluncur melintang: 600 mm, saluran batang: 75 mm, diameter luar chuck: 250 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Mesin baru kelas atas, "DER PANZER" dengan Siemens 828 Shopturn, BMT65 (MORI), lengan pengukur Renishaw, spindle belakang. Otomasi tersedia dengan biaya tambahan (lihat gambar) - Layar sentuh Siemens 15,6 inci Csdpjylnb Sefx Aa Tjpw - Spindel utama 3.500 rpm - Motor Siemens - Jalur geser datar dilapisi Turcite - Revolver BMT 12 posisi untuk 12 alat penggerak - Chuck 3-jaw Ø 250 mm pada spindel utama - Chuck 3-jaw Ø 150 mm pada spindle belakang - Sumbu C - Sumbu Y - Spindle belakang - Konveyor serbuk - Sistem pendingin dan pendingin internal bertekanan (IKZ), 20 bar - Lampu ruang kerja - Pedal kaki untuk penjepit chuck - Lampu status mesin multicolor AGW yang terlihat pada gambar tidak termasuk dalam penawaran.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 770 mm, panjang pembubutan: 740 mm, diameter pembubutan: 570 mm, lubang spindel: 105 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 30 rpm, jarak pergerakan sumbu X: 320 mm, jarak gerak sumbu Z: 820 mm, daya motor spindle: 36.000 W, gerak cepat sumbu X: 18 m/menit, pergerakan cepat sumbu Z: 18 m/menit, berat keseluruhan: 8.800 kg, diameter ayun di atas peluncur melintang: 770 mm, saluran batang: 91 mm, diameter luar chuck: 305 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Mesin baru kelas atas, "DER PANZER" dengan Siemens 828 Shopturn, lengan ukur Renishaw, dan senter belakang Codpfoylm Rrex Aa Topw

Kondisi: baru, Tahun pembuatan: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Lathe Center with Sub-Spindle, powered tools and true Y-axis, 35° slant bed Max. swing diameter: 650 mm Max. turning diameter: 320 mm Max. turning length: 550 mm Linear roller guides on all axes Rapid traverse X/Z/Y: 20/20/12 m/min Y-axis travel: 140 mm (±70 mm) Turret with 12 stations BMT55 including 12 driven Max. speed: 4000 rpm, 3 kW Main Spindle Chuck diameter: 254 mm Cpedswwvldspfx Aa Tow Spindle nose: A2-8 Max. bar capacity: 75 mm Spindle bore: 86 mm Drive power, direct drive 15/16 kW Max. speed: 3500 rpm Sub-Spindle Chuck diameter: 152 mm Spindle nose: A2-5 Max. bar capacity: 46 mm Drive power: 11 kW Max. speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment Parts catcher preparation Hinged belt chip conveyor Oil skimmer Coolant unit Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual The machine will be on display at EMO, Hall 12/D10, and is available for immediate delivery afterwards. A variety of automation systems such as bar feeders and loading robots are available.

Kondisi: baru, Tahun pembuatan: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC Turning/Milling Center with tailstock, powered tools, and true Y-axis (140 mm), 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 stations driven Max. speed: 4,000 rpm, 3 kW Spindle Chuck diameter: 203 mm (Optional 254 mm) Spindle nose: A2-6 (Optional A2-8) Max. bar capacity: 52 mm (Options: 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MT 3 Tailstock quill travel: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories Coolant system Three-color signal light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Includes special accessories Cedeqa Dtfepfx Aa Tjpw Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface The video shows the DT500.

Kondisi: baru, Z-MaT CNC/Cycle Lathe FTL660-2000mm, Control: Siemens 828D Shop Turn, 15" Touchscreen Flat-bed with linear roller guides and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing diameter over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tool System 12-station servo turret Tailstock Hydraulic tailstock MK5 Quill travel: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z rapid traverse: 15/15 m/min Bed type/Guideways: Box bed/Linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Cedpfx Aewwt Trea Tepw Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be exhibited at EMO, Hall 12/D10, and will be available for immediate delivery afterwards. Further sizes of this series available – see PDF for details.

Kondisi: baru, Tahun pembuatan: 2025, Z-MaT TN500-450 Siemens 828 D ShopTurn, 15" Touch 35° slant bed, CNC turning center with tailstock C-axis, hydraulic brake with driven tools, Linear roller guides on all axes with linear robot and magazine Max. swing diameter: 550 mm Max. turning diameter: 360 mm Max. turning length: 450 mm Rapid traverse X/Z: 20/20 m/min Turret: 12 stations, BMT45 including 12 driven tools Max. speed: 4000 rpm, 3 kW Spindle Chuck diameter: 254 mm Spindle nose: A2-8 Max. bar capacity: 75 mm Spindle bore diameter: 86 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 3,000 rpm Tailstock diameter: 110 mm / MT 5 Tailstock quill stroke: 100–500 mm Dimensions (W x D x H): 2.8 x 1.7 x 1.9 m Weight: 4.8 t Standard accessories: - Hinged belt chip conveyor - Oil skimmer - Coolant system - Three-color warning light Cpsdpfowwv Tusx Aa Tow - Work area lighting - Central lubrication - Programmable tailstock - Set of soft jaws - Tools and toolbox - CE conformity - Operating manual Machine with linear loading robot Video shows linear loading robot on another machine The machine will be exhibited at EMO Hall 12/D10 and will be available immediately afterwards.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 13.252 h, kecepatan spindel (maks.): 4.000 rpm, daya motor spindle: 17.500 W, produsen pengendali: SIEMENS, model controller: 840D SL, jumlah sumbu: 2, This DMG CTX 450 V3 horizontal lathe was manufactured in 2014. It is equipped with a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes a side chip conveyor and a high-performance hydraulic tailstock. This machine is ideal for high-precision turning and can process bar material with a maximum bar diameter of 65 mm. Contact us for further information about this machine. • Control: Siemens Sinumerik 840D SL with ShopTurn; ergonomic SlimlinePanel; Ethernet and USB data transfer; graphical support; ProgressLine & PlanOnLight; electronic cycle time and part counter display • Tool system: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); option for mounting 6 BT tool holders on the turret periphery • Measuring systems: direct measuring systems on X and Z axes with air purge protection • Spindle & workpiece holding: main spindle 17.5 kW / 370 Nm (40% duty cycle), up to 4,000 rpm; bar machining through the spindle; max. bar diameter 65 mm; chuck with through-hole • Tailstock: hydraulic high-performance tailstock, programmable with two selectable feed rates • Axes/guides: linear guides on all axes, 45 mm width; rigid machine bed; high positioning accuracy • Footprint/chip handling: compact footprint; side chip removal • Lighting: integrated LED work area lighting • Coolant: high-pressure coolant pump 12 bar; manual coolant flush gun 5 bar Cpsdpfx Asx E Eaasa Tjw Additional equipment • Chip conveyor (included)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 18.071 h, berat keseluruhan: 6.000 kg, jumlah sumbu: 3, Mesin DMG MORI Gildemeister CTV 250 2nd 3-sumbu ini diproduksi tahun 2016. Mesin ini ideal untuk pembubutan vertikal presisi dan dikenal dengan konstruksi yang kokoh serta keandalannya. Jika Anda mencari solusi pembubutan berkualitas tinggi, pertimbangkan mesin DMG MORI Gildemeister CTV 250 2nd yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Perlengkapan tambahan Cpodpfx Aex D Nl Ija Tjw • Opsi shopturn Keunggulan mesin Keunggulan teknis • Arus listrik: 58 A maks, 63 A • Tegangan: 400 V • Frekuensi: 50 Hz • Jam spindle: 19113 jam Informasi tambahan Mesin masih dalam keadaan terhubung listrik.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 2.084 h, kecepatan spindel (maks.): 4.000 rpm, daya motor spindle: 25.500 W, produsen pengendali: SIEMENS, model controller: 840D SL with ShopTurn, jumlah sumbu: 3, This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control unit, a main spindle with a maximum speed of 4,000 rpm, and a sub-spindle reaching 5,000 rpm. The machine is equipped with a 12-position servo turret with driven tool stations and a Y-axis travel of ±60 mm. If you are looking for a high-quality lathe, you should consider the DMG CLX 450 V6 we have for sale. Contact us for further information. • General configuration: CNC turning center with X, Z, C axes; Y-axis ±60 mm; sub-spindle; driven tools • Control panel: DMG MORI SLIMline multitouch, 19″ • Control system: Siemens 840D SL with ShopTurn • Main spindle: A2-8"; 17/25.5 kW (100%/40% duty cycle); max. 4,000 rpm; through-spindle clamping; max. bar capacity Ø 80 mm • Sub-spindle: A2-6"; integrated motor spindle ISM 52; 13/14 kW (100%/40% duty cycle); max. 5,000 rpm; non-through clamping • Tool turret: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); possibility of mounting 6 BT holders on turret circumference; TRIFIX precision coupling • Measuring systems: Direct measuring systems in X, Y, Z axes (Z with air purge option) • Axes and performance: Y-axis travel ±60 mm; C-axis on both spindles; high-precision 45 mm linear roller guides; increased rigidity for heavy-duty turning Additional equipment • Chip conveyor (chip discharge to the right) • Coolant gun, 5 bar • Optional high-pressure coolant system • Optional oil mist extraction unit AFS 600, 600 m³/h, filtration class H13 • Manual tool measurement probe (MARPOSS) • Optional direct measuring system for Z-axis with air purge • Option for Y-axis grooving cycle (V4/V6) • Differential pressure clamping for main spindle Cpodpfx Aasx E D Uvs Tsw • External chuck wash (main and sub-spindle) • 4-color signal tower • Set-up package included (C-P7223F) • The machine is ready for connection to a bar feeder.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 12.125 h, daya motor spindle: 29.000 W, kecepatan spindel (maks.): 5.000 rpm, produsen pengendali: SIEMENS, model controller: SINUMERIK 840D, jumlah sumbu: 6, This 6-axis EMCO Hyperturn 665MC Plus turning-milling center was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers spindle speeds of up to 5000 rpm on the main spindle and 7000 rpm on the counter spindle. It includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking for high-quality turning and milling capabilities, you should consider the EMCO Hyperturn 665MC Plus machine that we are offering for sale. Contact us for further information about this machine. Additional Equipment • Tool turret: 12-station VDI 30 radial turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with 24-position tool magazine, 210° swivel range • Optional tooling package: Includes static and live tool holders, collet chuck holders, reduction sleeves, and actuation clamps • Hollow clamping cylinder with draw tube / part ejector and flushing through the counter spindle / finished part removal device • Finished part collection device / coolant system in the chip conveyor / high-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / control cabinet air conditioning unit / electrostatic oil mist separator • Hydraulic power unit / machine light / interface for foot switch / signal light • Documentation with handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Workholding device for main spindle: Hainbuch BZI 80 center draw/ Machine Advantages Technical Advantages • Counter spindle: 22 kW / Counter spindle: 0-7000 rpm • Main spindle: kk 6 (bar capacity 65 mm) / Counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • The machine does not have Shopturn programming. It must be programmed using ISO code, with simple cycles available for drilling, milling, indexing, etc. Cpjdpfx Ajx D Hwnsa Tsw • 12-station turret and a milling spindle

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 489 h, kecepatan spindel (maks.): 3.250 rpm, daya motor spindle: 33.000 W, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 2, Horizontal lathe from 2021. This DMG MORI CLX 550 features a maximum turning diameter of 480 mm and a turning length of 1,240 mm. It is equipped with a 12-position turret and a maximum spindle speed of 3,250 rpm. If you are looking for a high-quality lathe, you should consider the DMG MORI CLX 550, which we have for sale. Contact us for further details on this machine. • Main spindle • Spindle type: A2-8", AC motor • Max. torque: 630 Nm (40% duty cycle) • Bar capacity: Ø 80 mm • Working area and capacity • Max. turning diameter: 480 mm • Max. turning length: 1,240 mm • Rapid traverse (X/Z): 30 m/min • Axes: Linear guides in all axes (size 45 mm) • Bed: Enhanced bed construction for increased stability • Tooling and turret Cpjdpfx Aoympiaea Tjw • Turret type: VDI 40 • Stations: 12-position turret (one station defective) + 6 BT stations • Measuring system: Direct measuring system for the X-axis • Control and software • Control panel: DMG MORI SLIMline multi-touch • CNC: 19" SIEMENS 840D • Software: ShopTurn, 3D control technology

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, daya motor spindle: 13.000 W, kecepatan spindel (maks.): 6.300 rpm, jumlah sumbu: 2, en-GB Codpfx Asyffgrsa Tepw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, daya motor spindle: 29.000 W, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 620 kg, jumlah sumbu: 6, en Cedpfx Asx D E Hbsa Topw

Kondisi: baik (bekas), Tahun pembuatan: 2005, Ref.-No.: 10475 Cpsdpfx Aajym Ncms Tsw Produsen: SPINNER Tipe: TC52-MC Tahun Pembuatan: 2005 Jenis Kontrol: CNC Kontrol: Siemes 810 D ShopTurn Lokasi Gudang: Halberstadt Negara Asal: Jerman No. Mesin: AN0XXXX Putaran: 280/400 rpm Tipe Dudukan Alat: Dudukan baja 9 pcs. Diameter Putar: 280/400 mm Panjang Putar: 550 mm Penjepit Alat: VDI 30 Putaran Spindel Maks.: 5.000 rpm Posisi Revolver: 12 unit Informasi tambahan: Chuck tiga rahang: Merek Schunk Stasiun alat bertenaga Sistem ekstraksi kabut oli Sistem pendingin Kabine, sistem ekstraksi Donaldson Tirit DCE Mesin dapat diperiksa dalam kondisi menyala sesuai perjanjian.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The machine is on display and was used solely for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe, directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Dimensions and Weights Maximum Width/Depth: 2300 mm Length approx.: 2530 mm Width/Depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Areas Chuck diameter: 150 mm Chuck clamping operation: hydraulic Centre height: 223 mm Centre distance: 850 mm Swing diameter over bed: 446 mm Swing diameter in bed gap: 520 mm Swing diameter over cross slide: 240 mm Bed width: 300 mm Axis Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 L Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 L Machine Data Through-hole diameter: 40 mm Motors Drive motor torque: 33 Nm Tailstock Taper: MK 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity: 52 mm Control System Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tools: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Csdpfx Ajymkwroa Tepw Continuous operation motor rating (S1): 7 kW Motor rating S6-30% duty cycle: 16 kW Motor torque: 33 Nm Motor torque S6-30% duty cycle: 80 Nm Rapid Traverse X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force X-axis feed force: 7.5 kN Z-axis feed force: 5.3 kN Tool Changer Type: hydraulic; VDI 30 Number of tool stations: 8 Max. shank size (square): 20 x 20 mm Max. boring bar diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety features • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling control panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-litre tank • RJ45 socket, USB port, and 230 V power connection • EMC (Electromagnetic Compatibility) • Six leveling feet • Operating tools included SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant material detection and processing • ShopTurn step programming • Manage network drives • 3-D simulation • Trace function Control System • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guideways • Robust flat-bed guideways Ball Screw • High rapid traverse speeds on all axes • Reduced wear • High positioning and repeatability accuracy

Kondisi: sangat baik (bekas), Hersteller: Emco Maschinentyp: Hyperturn 665 CNC-Drehmaschine Lagernummer: 22281 Bezeichnung: Drehmaschine Emco Hyperturn 665 Maschinennummer/Seriennummer: R7A Q 2701 Baujahr: 2002 Steuerung: Siemens Sinumerik 840D mit PCU 50 V1 Programmierung: DIN ISO, Siemens ShopTurn fähig Achskonfiguration: X-Achse und Z-Achse Max. Drehdurchmesser über Bett: ca. 665 mm Max. Drehdurchmesser über Planschlitten: ca. 500 mm Max. Drehlänge: ca. 1.000 mm Planscheibendurchmesser: ca. 665 mm Hauptspindel: Spindeldrehzahlbereich: bis ca. 4.000 U/min Spindelkopf: Spindelschnittstelle nach DIN-Norm Spindelmotorleistung: ca. 30 kW Spindelmoment: Hochmoment für Weichbearbeitung Werkzeugsystem: Werkzeugrevolver: CNC-gesteuerter Revolver Anzahl Werkzeugstationen: typischerweise 12 Positionen Werkzeugaufnahmetyp: VDI-Standard Angetriebene Werkzeuge: nicht vorhanden, Ausstattung für Weichbearbeitung Reitstock: CNC-gesteuerter Reitstock Pinolendurchmesser: ca. 100 mm Pinolenhub: ca. 120 mm Kühlmittelsystem: enthalten Späneförderer: enthalten Maschinenpräzision: Positioniergenauigkeit: ca. 0,01 mm Wiederholgenauigkeit: ca. 0,005 mm Elektrische Anschlüsse: Versorgungsspannung: 400 V Frequenz: 50 Hz Nennstrom: 110,00 A Sicherungswert: 125,00 A Anschlussleistung: 56,00 kW Druckluftbedarf: ca. 6 bar Maschinenabmessungen: Maschinenlänge: ca. 4.500 mm Maschinenbreite: ca. 2.200 mm Maschinenhöhe: ca. 2.100 mm Maschinengewicht: ca. 8.000 bis 9.000 kg je nach Ausstattung Cjdpfx Aex S Hghea Topw Einsatzbereich: Präzisionsweichbearbeitung von Stahl, Aluminium und nicht gehärteten Werkstoffen.

Kondisi: bekas, Tahun pembuatan: 2007, Swing diameter: 325 mm Turning length: 600 mm Control: Siemens Type: 840D Spindle speed: 5,000 rpm Drive power: 25 kW Total power requirement: 35 kW Machine weight approx.: 6.5 t Space requirement approx.: 3.5 x 2.5 x 2.1 m Tool speeds: 4,500 rpm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Machine equipped with Siemens 840D powerline with Shopturn - C and Y axes, driven tools - IRCO ILS-RBK bar loader - Coolant system with high-pressure coolant (IKZ) - Paper band filter - Partial hollow clamping system - Oil mist separator - Counter spindle - Parts catcher The technical data are provided by the manufacturer/operator and are therefore non-binding for us. Intermediate sale reserved; only our general terms and conditions of business and sale apply. About us - More than 400 own machines in stock - Over 15,000 m² storage area, crane capacity up to 70 t - More than 10,000 accessory items for your workshop Cpjdpfx Aeyquwkja Tew If you wish to sell machines, production lines, or your entire business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, DMG Gildemeister CTX 500 Alpha V6 - Tahun pembuatan: 2011 - Kontrol: Siemens 840D ShopTurn - Spindel lawan - dengan sumbu Y dan sumbu C - Revolver: 12 posisi, termotorisasi VDI 30 Perlengkapan tambahan: Cpodpfx Aaeylkuus Tow - Chuck hidrolik - Konveyor serpihan - Sistem pendingin - Antarmuka untuk loader batang - Penangkap benda kerja dengan konveyor sabuk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) Cpsdpfxex E Dncj Aa Tsw - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: sangat baik (bekas), en Cpsdsym D Tgjpfx Aa Tow

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, X/Y/Z: 360/120/750 mm Diameter batang yang dapat dilewati 82 mm Menara cakram dengan 12 stasiun alat bertenaga Sumbu C Sumbu Y VDI 40 Tailstock NC MK 5 dengan pedal kaki Pedal kaki untuk penjepitan di spindle utama Tirai udara Lampu sinyal Cpjdpfx Aow Nxyaoa Tsw Perangkat pendingin Konveyor serbuk Rem penahan hidraulis ShopTurn Fungsi Transmit (lintasan silinder pada permukaan selimut dan ujung) iXpanel (ekstensi operasi dan organisasi dari kontrol) Cawan penjepit Paket alat kecil

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 360 mm, diameter pembubutan: 570 mm, diameter ayun di atas peluncur silang: 570 mm, diameter quill: 95 mm, pergerakan cepat sumbu Z: 12 m/menit, kecepatan spindel (maks.): 2.500 rpm, panjang pemakanan sumbu X: 7 mm, kecepatan pemakanan sumbu X: 7 m/menit, jenis arus masuk: tiga fasa, berat keseluruhan: 2.970 kg, Technical Data: - Swing diameter - Distance between centers - Spindle speed - Power - Feed rate - Rapid traverse - Quill diameter - Quill stroke - Quill taper - Tool turret - 570 mm above bed - 360 mm above cross slide - 2000 mm - max. 2500 rpm - 11 kW - max. 7.5 m/min (longitudinal) - max. 7.5 m/min (cross) - 12 m/min (longitudinal) - 15 m/min (cross) - 95 mm - 220 mm - MT 5 - automatic - 8-position (see also options) - CAPTO turret disc Technical Description: - Machine bed - Cross slide - Tailstock - Control panel - CNC - Accuracy - Electrical system - Full enclosure - Paintwork 2) Additional Features / Options - Accessories - made from pearlitic cast iron GG-26 - High rigidity due to strong ribbing - Guideways hardened and ground - Automatic bedway lubrication - Manual operation - Quick clamping - Two traversable handwheels on control panel - One movable handwheel - CNC control “Siemens 828 D” - Siemens “Comfort” (incl. Shopturn and remnant material detection) - To DIN 8605 - Electronic handwheels (X and Z axes) - Low-voltage lighting - Full enclosure - RAL 7035 (Light Grey) / RAL 9023 (Pearl Dark Grey) - Options - Coolant system - Chip tray - Chip conveyor - Operating manual - 3-jaw wedge-bar chuck, Ø 250 mm Condition: All existing standard jaws / top jaws from Sommer must be compatible! - Removable tool turret (can be replaced with Multifix) Cpjdpfxjymtbge Aa Tow Dimensions: 3.8 m x 1.3 m x 2 m (LxWxH) Weight: 2.97 t Tools are not included in this offer!

Kondisi: baik (bekas), Tahun pembuatan: 2011, GILDEMEISTER CNC twin-spindle turning center Model: CTX beta 1250 4 A Machine no.: 00700000211 Year of manufacture: 2011 Csdowcxlwepfx Aa Tjpw Control system: CNC path control incl. 19” TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run hours: 24,814 h Technical data and equipment available on request

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, SIEMENS 828D control with Shopturn, 17-inch touch screen Swing diameter over bed: 550 mm Cedpfewbu T Usx Aa Tjpw Maximum machining length: 428 mm Maximum machining diameter: 300 mm Spindle bore: 62 mm Bar machining: 51 mm Spindle nose: A2-6 Spindle speed range: 35 – 5,000 rpm (motor spindle) X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer for driven tools: 12 Tool changer locking: hydraulic Tool changer drive: servo Tool change time: 0.2 seconds Tool holder: 25x25 mm Maximum speed of driven tools: 5,000 rpm Maximum power of driven tools: 5 kW Maximum milling capacity (shank cutter): 16 mm Maximum milling capacity (face mill): 50 mm Maximum drilling capacity: 16 mm Maximum thread cutting capacity: M16x2 Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: optionally programmable tailstock Quill taper: Morse taper 4 Tailstock travel incl. quill stroke: 565 mm Hydraulic unit tank volume: 20 liters Hydraulic unit pump capacity: 1.5 kW Hydraulic unit nominal pressure: 3.5 – 6 MPa Central lubrication tank volume: 2 liters Central lubrication pump power: 25 W Coolant tank capacity: 130 liters Coolant pump power: 25 W Continuous motor power: 11 kW, 400 V, 50 Hz Short-term motor power (30 min): 15 kW, 400 V, 50 Hz Weight: 4,000 kg Dimensions: 2,600 x 1,685 x 1,768 mm Accessories, Equipment: Coolant system, tool changer for 12 driven tools, 200 mm hydraulic chuck, linear guides and ball screws by THK/Japan, Siemens 828D control, spindle cooling, chip conveyor, workpiece measuring, automatic tool length correction, bar loader, air blast for tool changer and chuck, spindle, high-pressure cooling, oil separator, workpiece puller.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 28.339 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 450 mm, diameter pembubutan: 300 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, model controller: Siemens 840D ShopTurn, RINCIAN TEKNIS Diameter putar: 300 mm Panjang putar: 450 mm Perjalanan sumbu X: 160 mm Rentang kecepatan spindle utama: 5.000 rpm Rentang kecepatan spindle lawan: 5.000 rpm Diameter batang: 65 mm Tipe dudukan alat: VDI 30 Stasiun alat berpenggerak: 12 Kecepatan alat berpenggerak: 5.000 rpm Kecepatan rapid feed sumbu X: 60 m/menit Kecepatan rapid feed sumbu Z: 45 m/menit RINCIAN MESIN Kontrol: Siemens 840D ShopTurn Dimensi & Berat Ruang dengan konveyor serbuk: 6.895 x 2.284 x 1.885 mm Berat mesin: sekitar 4,3 t Jam Operasi Jam nyala: 59.643 jam Cpodpfx Aeycupqea Tow Jam spindle: 28.339 jam PERLENGKAPAN Konveyor serbuk Spindle lawan Chuck collet Hainbuch 65 mm Chuck collet Hainbuch 42 mm Part catcher Sabuk pengangkut Sumbu C Alat berpenggerak Dokumentasi