Beli Sistem Ctp bekas (13.934)

Kondisi: baru, ttl-1 Nsdpfswirnlox Ab Njlh

Tahun pembuatan: 2007, Kondisi: bekas, Die MOTOMAN-Schweißlinie befindet sich in einem guten Zustand und hat lediglich etwa 100 Betriebsstunden geleistet. Solche Anlagen werden überwiegend in der Herstellung von Landmaschinen – Anhängern, Rahmen, Achsen – eingesetzt. Individuell gefertigt oder aus Standardkomponenten montiert (außer Portal). Die automatische Schweißstation besteht aus: - Station: HD Gantry HP6/EA1400N - Positionierer: HSB-10000SX - Steuerung: NX 100 Schweißen: - Lichtbogenschweißen - MIG/MAG-Schweißen - Pulsbetrieb möglich - Verarbeiteter Drahtdurchmesser: 1–1,2 mm - Minimale Nahtauflage: 3 mm - Maximale Drahtvorschubgeschwindigkeit: 25 m/min - Schweißbrenner mit Kühlfunktion Lasernachführung: - Nahtsuche mittels Lasersensoren - Einsatz beim Wechsel der Nahtposition - Zulässige Abweichung von bis zu 5 mm - Verlängerung der Schweißzeit um 30% und mehr (abhängig vom Produkt) - Nahtverriegelung mind. 3 mm bei Tropfenbildung Positionierung: - Positionierer: HSB-10000SX - Tragfähigkeit des Positionierers: 10.000 kg - Positioniergenauigkeit des Roboterarms: 0,0001 mm Abmessungen der zu schweißenden Werkstücke: - Höhe/Breite: bis zu 3.000 mm (inklusive Spannvorrichtungen) - Länge: bis zu 6.500 mm (inklusive Spannmittel) - Maximalgewicht: bis zu 3.500 kg (durch Hebetechnik begrenzt) Besonderheiten der schweißbaren Werkstücke: - Serien von hochpräzisen Verbindungsteilen - Lange Schweißnähte - Große Materialstärken ab 5 mm - Steife Produktkonstruktionen - Für gleichbleibend hochwertige Schweißnähte - Hohe Biegelagetoleranzen der Teile Nedpfx Abjm Uc Igj Nolh - Hohe Maßhaltigkeit der Bauteile - Innenschweißungen bis 110 mm Tiefe Für weitere Fragen stehen wir Ihnen gerne zur Verfügung.

Kondisi: bekas, jarak tempuh: 187.000 km, Tahun pembuatan: 2019, 21577 Nedpoxq Dh Defx Ab Njlh

Kondisi: bekas, Tahun pembuatan: 2007, Max. workpiece length 3200 mm Max. tool width 200 mm Cross-cut saw 4 kW Max. tool height 130 mm SCM window and door manufacturing system WINDOR 60 - Year of manufacture: 2007 - Inspection / demonstration in operation possible until end of 2025 The WINDOR 60 is an integrated machining center for the flexible production of windows and doors. WINDOR 60 enables the following machining processes: 1.1 Cross-cutting with specification of finished workpiece length. 1.2 Tenoning with automatic workpiece rotation and manual feed (automatic on request) into the profiling unit. There are 1, 2, or 3 tenoning units (optional) available, with a mounting length of 620 mm, with counter-bearing and "Jolly/L" anti-splintering device. An option for automatic angled tenoning (max. +/- 60°) is also available on request. 1.3 Drilling (optional) Drilling can be performed on the end face and/or the longitudinal side of the workpieces. Dowel holes, handle/olive holes, and cup hinge drilling are possible. Nlsdoxq Hidopfx Ab Nsh 1.4 Profiling - right Two profiling spindles with mounting lengths of 320 mm and 620 mm (optional) with counter-bearing are available, up to a maximum of 4 units in series. All right-hand guides (left-hand upon request) are controlled by CNC. 1.5 Profiling - left: For machining workpieces that also need to be profiled on the left side, the following is available: Vertical auxiliary profiling spindle (optional) with a mounting length of 620 mm (not retractable). Up to 4 units in series possible. 1.6 Profiling underneath and/or on top (optional) 1.7 Machining for hardware grooves (optional), continuous or interrupted grooves possible. 1.8 Separation of the glazing bead is performed in the last position on the right side of the profiling unit. The working unit is equipped with a riving knife and holding device. A guide (with ON/OFF control from CNC) ensures correct workpiece positioning. 1.9 Rebate milling of sash frames (optional) is performed in the profiling unit of the machine, with the stop rail on the right serving as the reference stop. The left guide, with manual disengagement, adapts to the worktable and compensates for any width differences of the workpiece up to 20 mm. The time-controlled working unit at the infeed, with right/left rotation, serves as splinter protection. 2.0 Operator station and space requirements On the WINDOR 60, the operator is positioned ergonomically in the middle of the system, offering an optimal overview of the entire machining process. The clamping fixture, open towards the operator, allows effortless loading of the workpieces. The space requirement of the WINDOR 60 is minimal: thanks to its special design, the tenoning machine can be placed against a wall or in corners, which allows for optimal use of workshop space. In the case of automatic infeed into the profiling unit (optional), the workpieces are discharged downstream from the tenoning machine, with the pieces traveling to the left side. 3.0 DESIGN FEATURES 3.1 Tenoning carriage It is securely connected to the machine frame via prism guides on which it moves during operations; it is powered by recirculating ball screws, which ensure smooth running and precision with minimal maintenance.

Kondisi: bekas, Tahun pembuatan: 2009, Baujahr ist eine ca. Angabe 2009 Stromstärke 300 A Drahtdurchmesser 1 mm einsatzbereit sofort einsatzbereit Masch.-Nr.: 239836 +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++ Nedpfx Absibd Uao Nelh

Kondisi: baru, Tahun pembuatan: 2025, Five-Axis CNC Milling Center – 3D CNC Machining Center > The CNC milling system ‘Basis’ is the ideal entry-level model for machining plastics, composite materials such as CFRP, model building materials, or aluminum. > High feed rates, a compact 5-axis milling head for spatial machining, and top-class milling results: The machine is individually configured to your material requirements prior to delivery. This ensures excellent surface quality and outstanding machining results with all materials. > Using a fixture from HG GRIMME SysTech, the milling quality can be further significantly enhanced. Existing fixtures or tables can continue to be used at any time. > Modular expansion stages: The CNC machine can be upgraded at any time. Individual requirements can also be quickly implemented. For example, with an optional partition wall, one half of the table can be loaded and unloaded while machining takes place on the second half. This technology accelerates the production cycle. > Safe operation: The safety cabin, even in the basic configuration, features a large access area and can optionally be equipped with a noise reduction package. All drives and guides are protected and located above the work area. We offer around 365 options to tailor your CNC machining center precisely to your workpiece and material. The base machine can be expanded at any time. Nedpfx Aexdwn Rob Nolh > Basic Version of the CNC Machining Center • Cabin with sliding doors, automatic pneumatic opening • High-performance NUM Flexium+ CNC control with handheld terminal (nPad) and 19`` graphical display • Tool changer system with 13 positions, externally loadable • Bellows dust protection on Z-axis • Cooling unit Workpiece Envelope X/Y and Z • 2,500 x 1,000 x 600 mm (plus 162 mm base) Travel Range X/Y and Z • 3,100 x 1,600 x 910 mm Rotary Axis Travel Ranges (A and C) • C-axis rotation: 540° • A-axis swivel: ±110° Speeds • Rapid traverse, linear axes X/Y: 80 m/min • Rapid traverse, linear axis Z: 30 m/min • Rapid traverse, rotary axes A/C: 10,800°/min / 18,000°/min Accuracies • Positioning accuracy: ±0.045 mm • Repeatability: ±0.040 mm Milling Spindle • High-frequency milling spindle, 9 kW for continuous operation (S6) • High-frequency milling spindle, 8 kW for continuous operation (S1) • Max. speed: 36,000 rpm • Tool holder: HSK E 40 Machine Weight: • Approx. 8,000 kg Included Special Equipment • Vacuum pump and vacuum system, 1x 6-fold • Knee switch, 1x • Ethernet and remote maintenance • 3D spline • 3D head data • T-Box interface

Kondisi: baru, rollbahn-001 Nljdpfowiq Spex Ab Nsh

Kondisi: bekas, Tahun pembuatan: 2010, 2010 powder coating line, excellent condition. Currently in operation, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Process conveyor Automatic speed V = 1.2 m/min Variable speed from 0.5 to 2.5 m/min Pretreatment station MNA-3-LPG, total length 16.7 m Entry zone: L = 2.5 m a. Washing, degreasing, and phosphating: L = 3.6 m Number of spraying frames – 10 Number of nozzles per frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ tank for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip-off zone L = 3.1 m Drip-off time – 2 min 30 sec c. First rinse L = 1.2 m Number of spraying frames – 4 Number of nozzles per frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water tank Rinsing time – 1 min d. Drip-off zone L = 3.1 m Drip-off time – 2 min 30 sec e. Final rinse L = 1.28 m Number of spraying frames – 3 Number of nozzles per frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water tank Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip-off zone L = 2 m Drip-off time – 1 min 40 sec Three extraction system connections with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 unit. Automatic post-wash dryer AST-1-KLPG: Nsdpev Ed Ukefx Ab Njlh Working area dimensions L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, LPG-fired, 200 kW Three fans, air supply 6000 m³/h Two extraction system connections Temperature sensor and controller Overheat sensor Circulation detector Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 unit. Automatic curing oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers, LPG-fired, 300 kW each Eight circulation fans, each with a capacity of 6000 m³/h Two extraction system connections Temperature sensor and controller Overheat sensor Circulation detector Working zone made of galvanized steel Thermal insulation 200 mm thick Curing time – 25 min 1 unit. Overhead rail conveyor system ATR for paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 units Tensioning station – 1 unit Chain lubrication station – 1 unit Rails supporting structure drawings – 1 set.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, CMS AURA Automatic Vertical Dry Grinding Line Edging process via a total of 8 grinding wheels with direct extraction Max. processing height: 2,700 mm Processable glass thickness: 4–22 mm Max. glass length: 3,100 / 4,500 mm Stand-alone or integrated into the IG line Extremely easy to operate and virtually maintenance-free Nlsdpfxswd Ihqo Ab Njh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Ficep Gemini G32 Sistem CNC gantry otomatis untuk pengeboran, milling, dan pemotongan termal pada pelat baja berukuran besar Ukuran pelat [maks. mm]: 3.100 x 8.000 Ketebalan pelat dengan plasma [maks. mm]: 80 Torch plasma lurus [maks. jumlah]: 1 Ketebalan pelat dengan oxy-fuel [maks. mm]: 100 Torch oxy-fuel [maks. jumlah]: 2 Kepala bor [jumlah]: 1 Alat bor per kepala [jumlah]: 8 Diameter bor [maks. mm]: 40 Nlodpfx Asxq Rndjb Nsh Ketebalan bor [maks. mm]: 80 Daya spindle [kW]: 15 Kecepatan spindle [maks. RPM]: 7.000 Berat mesin [kg]: 4.500 / 4.800

Kondisi: bekas, 161 Nodpeh Hvgxofx Ab Njlh

Kondisi: baik (bekas), Tahun pembuatan: 2013, Höcker sistem ekstraksi dengan rotary valve Data teknis: Diameter inlet 300 mm Kapasitas aliran nominal 5.100 m³/jam Kapasitas aliran maksimum 6.000 m³/jam Tekanan rendah pada aliran nominal 2.700 Pa Daya motor 7,5 kW Daya motor getar 0,18 kW Rotary valve (katup sel) Kipas transportasi (warna biru) yang terlihat pada gambar tidak termasuk dalam pengiriman Data teknis tambahan tersedia atas permintaan Data teknis tanpa jaminan. Diambil dari papan tipe. Nlodpfxsxqzaqo Ab Nsh

Kondisi: sangat baik (bekas), Lamier FL 7B 4kW Extraction System Power: 4 kW Number of collection bags: 2 pcs Nodpownbpcjfx Ab Nolh Diameter of collection bags: 600 mm Number of filter bags: 32 pcs Diameter of filter bags: 200 mm Length of filter bags: 1550 mm Bag shaking system Inlet nozzle diameter: 300 mm CE certificate Overall dimensions: height 370 cm, width approx. 260 cm, depth 110 cm

Kondisi: bekas, Rain gutter, downpipe, and elbow forming machines, production line. Three machines included. 1. Rain gutter forming machine, with band saw cutting. Manufactured gutter diameter: 80 x 100 mm Material used: Width: 350 mm. Thickness: 0.43 – 0.55 mm. 2. Downpipe forming machine, suitable for both 127 mm and 152 mm standards. Guillotine cutting. Material used: Nedpfx Abev Evcto Nolh Width: 300 mm. Thickness: 0.43 – 0.55 mm. 3. Elbow forming machine: 400V/3-phase. If you have any further questions, we will be happy to answer them.

Tahun pembuatan: 2006, Kondisi: baik (bekas), nomor mesin/kendaraan: PL001240 , Thermal CTP (plate setter) Throughput (plates/hour at max. format): 14 plates/hour Min. plate size: 370 x 323 mm Max. plate size: 930 x 1140 mm Plate thickness: 0.15 - 0.3 mm Nsdpofmmyzsfx Ab Nelh Technical data may vary depending on job, consumables, or other factors

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: JKZ150, Sistem ekstraksi Krämer ini dilelang secara online dalam lelang industri/lelang mesin kami terkait penutupan lokasi Holzbau Hahn – lini perakitan Hundegger – mesin pengolahan kayu – kendaraan niaga – perkakas – material – kontainer – rak. Nledpfx Abjxqv Rde Neh Item ini dan banyak posisi lainnya dapat Anda temukan di platform kami.

Kondisi: bekas, Tahun pembuatan: 2014, MIG welding machine JÄCKEL MIG 405 Nsdpfxehl Nnds Ab Nslh Power rating: 400 A +++++ Please note that the machine is in a disassembled and ready-for-loading condition. For this reason, a demonstration under power or the production of a video is not possible. Furthermore, our listing contains the most informative photos of the best possible quality. Unfortunately, sending further pictures is not possible. +++++

Kondisi: sangat baik (bekas), IMAS extraction installation 11 kW Main motor power: 11 kW Number of filter bags: 64 pcs Filter bag dimensions: 200x1900 mm Njdpfoww Hiaex Ab Nslh Explosion relief panels Filter bag shaking system Dimensions: 1890x1890x5680 mm Weight: 1150 kg

Kondisi: bekas, Electric paint booth, in good condition Internal dimensions: 4300 x 1900 x 2200 mm Currently disconnected, ready for transport. If you have any further questions, we will be happy to assist you. Nlodpfx Abjv Tm N Tj Neh

Tahun pembuatan: 2011, Kondisi: baik (bekas), nomor mesin/kendaraan: PU000567, Thermal CTP: Plate Imager Imaging Technology: External Drum Dual Cassette Loader DCL 106: Fully automatic plate loading/unloading unit with 2 integrated cassettes for different plate formats PST 480 B Plate Stacker Nsdpofh Dmqsfx Ab Nelh Technical Specifications: Throughput (plates/hour at max. format): 12 plates/hour Min. plate format: 370 x 323 mm Max. plate format: 930 x 1060 mm Plate thickness: 0.15 – 0.3 mm Technical specifications depend on job, consumables, and other factors as applicable.

Kondisi: bekas, Operating range 50 - 75 mm Operating range 75 - 100 mm Operating range 200 - 300 mm MEASURING TECHNOLOGY - OUTSIDE MICROMETER Three pieces in the package Measuring ranges: 50 - 75 mm 75 - 100 mm 200 - 300 mm +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the creation of a video is not possible. Njdshm Nxwspfx Ab Nolh Furthermore, our listing contains the most informative photos of the best possible quality. Unfortunately, it is not possible to provide additional images. +++++

Kondisi: bekas, Measurement range 300 - 400 mm Workpiece size 300 - 400 mm Condition: good OUTSIDE MICROMETER from 300 - 400 mm good condition Shipping possible +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the production of a video is not possible. Njdpjhm Ub Djfx Ab Nslh Furthermore, our listing contains the most informative photos of the best possible quality. Unfortunately, sending additional pictures is not possible. +++++

Tahun pembuatan: 2004, jam operasional: 270 h, Kondisi: bekas, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Operating hours: 270 h Electric: yes Nodpfeq N E U Aex Ab Nolh

Kondisi: bekas, Length mm Height mm Power 16 kW Control Type AT 1 Units in stock 2 Voltage 380 V Connected load 43 kW Total power requirement kW Machine weight approx. t Nodporl Uctefx Ab Nelh Space requirement approx. m 40 kVA and 16 kVA Power As a package Both operated by foot pedal

Kondisi: bekas, Tahun pembuatan: 1999, Ampere 330 A dengan kabel Nlsdsw Syggspfx Ab Neh