Beli Tampilan Band bekas (4.615)

Kondisi: baru, en Iaodpfefg E Hvex Afior

Kondisi: baru, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Iodpfx Afefu Nbbeioar Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirement: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the sawing stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Minimum rest piece length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m Isdefgyifspfx Afijar 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly Iedpfxjfgyige Afiear "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Control: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space requirements: approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 255 Super VA-I CNC • Left mitre 45°, automatic operation • Left mitre 60°, semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece, very quiet and low-vibration cutting • Removable chip tray (for cleaning) • Shockproof and ergonomic control panel with oil-resistant EPDM cover Iaodpfxed Iipzo Afijr • High-performance CNC positioning with incremental encoder • Easy top access to saw, material, and feed unit • Folding safety cover • Fine adjustment for feed rate • Semi-automatic cutting • CNC control for optimizing work processes: input options for various parameters such as quantities and material lengths, automatic calculation of kerf width • CNC control for 10 different sawing programs, each with up to 99 subprograms for different lengths and quantities—e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) with ball screw, incremental feed, and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm; minimum remnant piece length 170 mm.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is Iajdpfsfg E Hmex Afisr built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250x600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870x600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550x450 mm Bandsaw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double-mitre bandsaw for fast cutting with pusher system P15. Option P30. Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, with large radial central positioning. The worktable is mounted with high-quality preloaded bearings, ensuring very smooth rotation. CNC control CNC control allows programming of up to 90 cutting programs with different cut lengths, batch sizes, and mitre angles. Iaodpfx Afefg E Hneior Double-sided clamping positioning system The B&S pusher, feed and positioning system, is equipped with "double-sided opening grippers" operated hydraulically. This ensures secure gripping and transport of materials and bundles that may differ from the ideal shape. The pusher system is separate and runs on ball-bearing linear guides, precision-ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirement: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting • CNC control for workflow optimization Enables input of various parameters such as quantities and material lengths, automatic calculation of the cutting kerf • CNC controller for 10 different sawing programs with 99 sub-programs for different lengths and quantities, e.g. one sawing program with a variety of section lengths • Automatic feed unit (CNC) via ball screw incremental feed Iaodpfx Afjd Iiproier with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum remaining piece 170 mm.

Kondisi: baru, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 870 mm Blade speed 18 - 110 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic, GBS 250 Super VA-I MPS • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation (Cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet operation and very low vibration • Removable chip tray (for cleaning/disinfection) • Top access to saw, material, and feed unit • Foldable safety cover • Fine adjustment of feed • Semi-automatic cut! Automatic sawing with microprocessor control Configurable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired quantity and length: material positioning, cut execution and piece counting until the program is complete • MPS control for entering the required feed quantity • The LED display shows all essential machine data during cutting operation (current consumption, cutting time, quantity) • Entered data are stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as an error message and monitors the complete process • Feed unit mounted on floating bearings Iodpjd Iip Aefx Afijar • Length adjustment via handwheel and vernier scale with mechanical position indicator Adjustable for cut lengths from 2.5 mm to 420 mm, or via reversing automation repeatable 1 – 29 times, remnant length 210 mm

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Isdpfx Afoupw R Aeijar Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm. Includes: - Micro-spray device - Leveling elements

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, berat keseluruhan: 2.000 kg, Behringer HBP263A(1000-KGT Mesin dalam kondisi sempurna Penekan paket Gerakan material sekali jalan: 1000 mm x 999 mm Isdpfx Afsywr Stjiear Sistem pendinginan ganda: pelumasan tetes oli dan pendingin cair Data teknis: Rentang pemotongan pada 90° (bulat/persegi): 260 mm / 260 x 260 mm Rentang pemotongan pada 90° (datar): 300 x 260 mm Kecepatan pemotongan (dapat diatur bertahap): 20–120 m/menit Ukuran mata pisau: 4640 x 34 x 1,10 mm Daya motor gergaji: 3,00 kW Kebutuhan daya total: 8,00 kW Panjang/minimum diameter pemotongan: 10 mm / 15 mm Berat mesin: sekitar 2000 kg Dimensi (P x L x T): sekitar 2,60 x 1,60 x 1,90 m Termasuk 5 pisau baru – Meja rol masuk dan keluar – Dokumentasi teknis orisinal lengkap Mesin dapat dilihat di Głosków dekat Warsawa Pengiriman dapat diatur ke lokasi manapun di UE

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 4.135 h, berat keseluruhan: 3.500 kg, tinggi meja: 740 mm, daya pompa pendingin: 1.500 W, panjang mata gergaji pita: 5.300 mm, penggerak gergaji: 5.500 W, Saw manufactured in 2019 / showroom model – first commissioning in 2021. The saw is in very good technical and visual condition. Technical specifications can be found in the image above. Iaodpfx Ajuiu Siefier Price does not include roller conveyor.

Kondisi: hampir baru (bekas), Fungsionalitas: fungsi terbatas, K440 adalah salah satu mesin bandsaw berperforma tinggi. Berkat kecepatan pita yang optimal, gergaji vertikal ini sangat ideal untuk memotong jumlah besar potongan daging segar dan beku. Cocok untuk memotong balok ikan dan daging beku. Bandsaw stasioner K440 dengan meja geser rol cocok untuk penggunaan universal di pabrik pemotongan, supermarket, serta industri daging dan ikan. Ijdpfxjx S I Rbj Afiear Dimensi penting: Diameter pulley: 430 mm Pisau bandsaw: 3370×16 mm Tinggi potong maksimum: 415 mm Ruang bebas sisi potong maksimum: 410 mm

Kondisi: baru, – Semi-otomatis – Hidraulis – 2 kecepatan – Kemiringan ganda – Tekanan pemotongan dapat diatur secara hidraulis – Pendinginan – Pisau gergaji 2730 x 27 x 0,9 mm – Pengendalian kaki – Tombol darurat Iaodpfsh Razfjx Afijr – Dokumentasi – 400 V

Tahun pembuatan: 1982, Kondisi: bekas, de-to-hu-it-lt-lv-nb-nl-pl Ijdpfx Afsy Ab Izoijar

Kondisi: baru, Belt width 100 mm Belt length 915 mm Grinding wheel size 200 mm Work table: 170x125 / 265x150 mm Total power requirement 0.5 kW Machine weight approx. 26 kg Space required approx. 0.6 x 0.5 x 0.3 m Iedpfjupxqwjx Afioar

Kondisi: baru, Belt width: 150 mm Belt length: 1220 mm Grinding wheel dimension: 225 mm Work table: 150 x 400 mm Table tiltable up to 90 degrees Iaedjfhk T Hjpfx Afior Table surface: 150 x 130 mm Connection voltage: 230 V Total power requirement: 0.75 kW Machine weight approx. 35 kg Space requirement approx. 650 x 360 x 400 mm

Kondisi: bekas, Used bandsaw, price ex works. Iaedpfx Afewx Rp Heior

Kondisi: bekas, Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, Bandsaw Kasto HBA 360 AU termasuk meja rol Kapasitas potong: 360 mm Isdpfoyxxfiex Afisar Ukuran mata gergaji: 5334 x 32 mm Panjang: 2310 mm Lebar: 2600 mm Tinggi: 1700 mm Berat: 2600 kg Untuk pertanyaan lebih lanjut, silakan hubungi kami.

Kondisi: baik (bekas), Mesin Pengikat Mosca RO-M Fusion 800×600 Mesin ini 100% berfungsi dan siap untuk produksi. Produsen: Mosca, Jerman. Tahun pembuatan: 2019. Perangkat ini sangat penting untuk pengiriman, membungkus paket berat seperti selebaran atau katalog. Tali PP 5mm memperkuat kemasan dan menciptakan pegangan yang memudahkan pengangkatan dan pemindahan. Panel kontrol berputar Panjang dan ketegangan penarik pita dapat diatur Sumber daya: 230V Iaodpfxsywdtce Afijr Berat: 240kg

Kondisi: baik (bekas), Mesin Banding NM-420 W30 Mesin baru ini didasarkan pada desain Barat yang telah terbukti. Tahun pembuatan: 2025. Perangkat dapat beroperasi dalam mode manual atau otomatis. Iaodpfxjywdq Ue Afisr Setelah material dimasukkan, mesin akan membungkusnya dengan pita, memampatkan, dan menutupnya sehingga menghasilkan paket yang elegan. Ideal untuk membungkus kartu nama, selebaran, dan material lainnya. Spesifikasi teknis: Lebar pita: 30 mm Siklus per menit: 26 siklus/menit Dimensi produk terikat: 400 x 200 mm Paket sudah termasuk pita dan buku petunjuk.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Kapasitas potong pada 90 derajat: Bulat: Ø303 mm Persegi PxT: 360 x 305 mm Iodpfx Aew Rz Shjfisar Kapasitas potong pada 45 derajat: Bulat: Ø265 mm Persegi PxT: 265 x 300 mm Kapasitas potong pada 30 derajat: Bulat: Ø175 mm Persegi PxT: 175 x 300 mm

Tahun pembuatan: 1984, Kondisi: baik (bekas), Die auf dem Tisch rot markierte Komponente ist nicht im Lieferumfang enthalten. Iaedpfxelz Izle Afijr

Kondisi: baik (bekas), No. Artikel internal: 25123 Bandsaw Mössner Rekord Tipe: SSF / 420 + Perangkat pengelasan pita gergaji + Mekanisme pemajuan otomatis + Pisau gergaji cadangan Panjang mata gergaji: min. 3150 mm / maks. 3300 mm Meja: 600 x 500 mm (dapat dimiringkan) Iasdoyxpa Rjpfx Afijr Lebar potong: maks. 410 mm Tinggi potong: maks. 230 mm Dimensi (PxLxT): 80 x 100 x 185 cm Berat: sekitar 800 kg

Tahun pembuatan: 2000, Kondisi: baik (bekas), berat muatan maksimum: 5.400 kg, Diameter batang (maks.): 40 mm, ketebalan dinding: 50 mm, nomor mesin/kendaraan: 26130,