Beli Tekan Eksentrik bekas (5.593)

Kondisi: baik (bekas), Tahun pembuatan: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press, Klsdpfjb A Hwhsx Aa Nsl - Fully enclosed safety cage - Pneumatic viewing window with finger protection - Press force: 35 t - Throat depth: 190 mm - Stroke rate: 105 strokes/min - Adjustable ram: 50 mm - Ram area: 250 x 200 mm - Adjustable stroke: 15–70 mm - Table size: 540 x 310 mm - Throat depth: 180 mm

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Kodpshlnzkofx Aa Njll

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lebar meja: 730 mm, panjang meja: 810 mm, gaya penekanan: 200 t, MODEL ROVETTA FO-200 Kapasitas nominal: 200Tn Langkah tetap: 200 mm Meja: 730 x 810 mm Jarak antara tiang: 760 mm Pukulan per menit: 65 Jarak vertikal antar meja: 450 mm Tinggi kerja: 800 mm Kedpfx Asya Hidea Noll Regulasi sekrup slider: 100 mm Motor utama: 11 kW Langkah bantalan pneumatik: 100 mm Gaya bantalan pneumatik: 25tn

Kondisi: baik (bekas), Tahun pembuatan: 1986, Single-column eccentric press, single-column press, automatic punching press, single-column eccentric press, eccentric press, single-column press - Manufacturer: Heilbronn, Single-column eccentric press type NEPD 50 - Pressing force: 50 t - Clutch: pneumatic - Stroke: adjustable 8 – 100 mm - Table size: 500 x 650 mm - Table cut-out: Ø 240/100 mm - Throat depth: 255 mm Kodpfxei Agyne Aa Nsll - Punch holder: Ø 40 mm - Insertion height: 355 mm - Dimensions: 1800/1080/H2260 mm - Weight: 3050 kg

Kondisi: baru, Tahun pembuatan: 2025, lebar meja: 1.000 mm, panjang meja: 1.200 mm, gaya penekanan: 200 t, masa garansi: 24 bulan, panjang langkah: 200 mm, Excentric press is a type of mechanical press that operates with a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability due to their rigid frame structures. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, die protection, and operator safety. With its monoblock frame, 8-guided ram system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance suited for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety device - Controlled, user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain - Low maintenance requirement thanks to automatic lubrication infrastructure Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch & brake • Additional extra plate with T-slots • 8-guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety system • Gear group in sealed oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Special dies as requested ✅ TECHNICAL DATA (CEHP-TB-200) Kedpfjx N Sccox Aa Noll Capacity: 200 Ton Table-ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimension: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baik (bekas), Manufacturer: Digep Model: SD63 Klsdpfeiukrrex Aa Nol Pressing force: 63 t Table size: 560 x 740 mm Stroke length: 200 mm Net weight: 4 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, tinggi meja: 360 mm, lebar meja: 810 mm, gaya penekanan: 45 t, Manufacturer: AIDA Model: NC1-45 Pressing Force: 45 t Year of Manufacture: 1987.08 Stroke Length: 80 mm Shut Height over Table (adjustable): 240–300 mm Table Size: 810 x 360 mm Ram Size: 410 x 340 mm Electrical Specification: 3x200V (!!), 5.5 kW – Japanese Standard Kledsu Dkc Aspfx Aa Nol Net Weight: 3,300 kg Dimensions: 980 x 1480 x 2275 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, lebar meja: 500 mm, panjang meja: 900 mm, penyesuaian langkah: 75 mm, berat keseluruhan: 5.600 kg, gaya penekanan: 60 t, panjang langkah: 150 mm, daya: 5,5 kW (7,48 hp), tegangan masuk: 220 V, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, APA 60 ton eccentric press with air clutch in like-new condition for sale Manufacturer: HE Shenzhen HONG-ER Machine LTD Model: APA 60 Year of manufacture: 2017 Press force: 60 t Two-hand operation Central mast Required air pressure: 6 bar Stroke length: 150 mm Number of strokes: 35–90/min Table-to-ram distance: 300 mm Adjustable stroke: 75 mm Table size: 900 x 500 mm Kodpfju Hav Rsx Aa Njll Ram size: 500 x 360 mm Total response time: 170 ms Voltage: 220 V, 50 Hz, 5.5 kW Machine weight: 5600 kg

Kondisi: baru, pk100_excenterpresse_2024_de Kledpfor I H Dgjx Aa Nel

Kondisi: baru, Capacity: 100 t Strokes per minute: 50 spm Table clamping surface: 900 x 700 mm Slide dimensions: 500 x 350 mm Stroke adjustment: 20 - 130 mm Ram adjustment: 100 mm Installation height: 400 mm EEP-PK100 – Eccentric Press Technical Data Capacity: 100 t Strokes per minute: 50 spm Table size: 900 × 700 mm Ram size: 500 × 350 mm Stroke adjustment: 20 – 130 mm Klodev Hin Ejpfx Aa Nel Ram adjustment: 100 mm Installation height: 400 mm Features & Accessories Control system: Siemens S7-1200 PLC Operating screen: Siemens 9’’ touchscreen Stroke adjustment directly via display Setting of min. & max. stroke count Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety design in control cabinet Light curtains: SICK, PILZ, or LEUZE (category 4, CE-compliant) CE-compliant safety system 2 rupture disks – included in delivery Lower support plate for secure transport Underrun protection – for maximum occupational safety Pneumatic clutch and brake combination The machine impresses with an exceptionally comprehensive standard equipment package at the highest technical level. Use of branded components such as Siemens, PILZ, and SICK ensures maximum reliability and longevity.

Tahun pembuatan: 1971, Kondisi: bekas, Pressure: 160 t Throat Depth: 440 mm Stroke: 20 - 120 mm Table Surface: 1050 x 750 mm Strokes per Minute: 42 and 62 spm Ram Surface: 800 x 500 mm Pin Hole (Depth x Diameter): 85 x 50 mm Kodscyc Adopfx Aa Nell Through Opening in Table: 355 mm Installation Height (Stroke Down, Ram Adjustment Up): 455 mm Ram Adjustment: 100 mm Machine Weight approx. 11.2 t *with gear drive *with fixed work table *with enlarged table and ram surfaces *with increased throat depth *with body pass-through *with ram weight compensation The machine is currently being overhauled, and the clutch is being dismantled for this purpose. (Current condition: press is disassembled)

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Kjdped Nl E Uefx Aa Noll Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Kondisi: baru, Pressure: 40 t Outreach: 225 mm Klsdeb U Hwmepfx Aa Nol Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Kondisi: baru, Pressure: 25 t Reach: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Strokes per minute: 160 spm Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in the table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight: approx. 1.9 t Kledpjb U Hwpefx Aa Nsl Space requirement: approx. 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Tahun pembuatan: 1977, Kondisi: bekas, Pressure 40 t Outreach - mm Stroke 8 - 90 mm Table dimensions 630 x 430 mm Ram adjustment 60 mm Max. strokes per minute 65 Kodpfx Aaeb U Hxfe Njll Total power requirement kW Machine weight approx. 2480 kg Space requirement approx. m - Gear train - Tiltable - Table clamping plate - Mechanical overload protection in the ram (shear plate) - Pneumatic clutch

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Table size 520 x 400 mm Strokes 160 strokes/min Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication Klodpfx Aaeb U Hwno Njl - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Tahun pembuatan: 1986, Kondisi: bekas, Pressing force: 40 t Installation height: 250 mm Stroke: 8 - 50 mm Kledpscb T Twofx Aa Njl Clamping area (table) L x W: 620 x 450 mm Table height above floor: 980 mm Stroke rate: 85 - 500 strokes/min Distance between uprights: 680 mm Ram adjustment: 50 mm Number of T-slots: 4 Ram surface: mm Total power requirement: 8 kW Space requirements approx.: 2.3 x 2.2 x 2.8 m Machine weight approx.: 5.8 t - Ram with 2 connecting rods - Unidor tool monitoring - Kaiser gripper feed on the right, belt width 180 mm, feed length 150 mm, max. 2 mm - Kaiser scrap shear on the left - Soundproof enclosure - Roller-mounted eccentric shaft

Kondisi: bekas, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Slide adjustment: 55 mm Slide area: 290 x 210 mm Kodocp Apyepfx Aa Njll Slide bore: 40 H7 mm Passage opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Centralized lubrication system by Vogel - Balluff cam controller - Height-adjustable table - Mechanical overload protection in the ram (shear plate) - Control cabinet with touchscreen - Foot switch

Kondisi: baru, Pressure: 40 t Kedpfjb U Hwtox Aa Njll Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Stroke rate: 130 strokes/min Ram area: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space required approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication system by Vogel - Cam controller by Balluff - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Kondisi: bekas, Pressing force 63 t Outreach - mm Stroke 16 - 125 mm Table size 800 x 600 mm Working capacity 250 Kledpech Umcefx Aa Nol Shearing area 1600 mm² Table adjustability 220 mm Total power requirement 6 kW Machine weight approx. 5 t Distance table/ram 562 mm Machine will be dismantled and partially overhauled -New paintwork -New control cabinet -Conversion for safe operation -Refurbishment

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ram area 350 x 355 mm Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Additional information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: Kledpsdlcy Hsfx Aa Njl * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Tahun pembuatan: 1990, Kondisi: bekas, Press force: 80 t Throat depth: 250 mm Stroke: 5–95 mm Table area: 805 x 510 mm Distance table/ram (stroke bottom): 400 mm Kodpfxefn Aqnj Aa Nsll Ram bore: 45 mm Ram adjustment: 100 mm Ram area: 360 x 300 mm Strokes per minute: 55 Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight compensation Machine will be partially overhauled in our facility next year (dismantling, inspection, new painting, new wiring, new control cabinet)

Kondisi: bekas, Pressure: 200 t Kljdpfogk Rfzex Aa Nol Throat depth: - mm Stroke: 250 mm Table size: 2420 x 840 mm Ram area: 1850 x 650 mm Installation height: 500 mm Ram adjustment: 110 mm Upright spacing: 1900 mm Table height: 170 mm Strokes per minute: 25 - 45 Total power requirement: 22 kW Space requirement (approx.): 2550 x 2370 x 3820 mm Weight: 30 t - Pneumatic clutch - Press safety valve, Herion - Cam controller, Balluff - Chain breakage monitoring - Hydraulic overload protection, HYDAC - Motorized ram adjustment with digital display - Free-standing control cabinet with ABB safety control - Separate two-hand control panel with foot switch - Side safety doors, sliding - Front safety guards with light curtain – vertical + horizontal The machine shown and described above is safe for manual loading operations. The machine is also available in a different version or can be configured as an automatic press with feeder. Equipment options available as per customer requirements.

Tahun pembuatan: 1986, Kondisi: bekas, Pressing force 15 t Installation height - mm Strokes per minute 200 - 2000 Table surface - mm Klodpfxefn Apxe Aa Nel Ram surface 490 x 200 mm Sheet width 5 - 50 mm Stroke adjustment 10-30 mm Weight 3 t Dimensions 1370 x 1200 x 2200 mm Drive 10 kW Table through-hole 350 x 100 mm Table width 530 / 210 mm Table length 530 / 350 mm Only in operation for 2 years High-speed model

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation - motorized ram adjustment - central grease lubrication (manual) Kjdpocubatsfx Aa Njll - rupture disc - clamping plate - safe for manual loading/unloading - operating manual available